| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 14 Mar 2012 05:05:04 +0400
From: Anton Vorontsov <anton.vorontsov@...aro.org>
To: Arun Murthy <arun.murthy@...ricsson.com>
Cc: dwmw2@...radead.org, linux-kernel@...r.kernel.org,
karl.komierowski@...ricsson.com, johan.palsson@...ricsson.com,
linus.walleij@...aro.org
Subject: [PATCH 2/6] ab8500_btemp: Get rid of 'enum adc_therm'
This is the same as abx500_adc_therm, but when the former is used,
the following warning flood pops up:
drivers/power/ab8500_btemp.c: In function 'ab8500_btemp_batctrl_volt_to_res':
ab8500_btemp.c:150:25: warning: comparison between 'enum abx500_adc_therm' and 'enum adc_therm' [-Wenum-compare]
ab8500_btemp.c: In function 'ab8500_btemp_curr_source_enable':
ab8500_btemp.c:212:25: warning: comparison between 'enum abx500_adc_therm' and 'enum adc_therm' [-Wenum-compare]
ab8500_btemp.c:244:32: warning: comparison between 'enum abx500_adc_therm' and 'enum adc_therm' [-Wenum-compare]
ab8500_btemp.c: In function 'ab8500_btemp_measure_temp':
ab8500_btemp.c:462:25: warning: comparison between 'enum abx500_adc_therm' and 'enum adc_therm' [-Wenum-compare]
ab8500_btemp.c: In function 'ab8500_btemp_id':
ab8500_btemp.c:528:121: warning: comparison between 'enum abx500_adc_therm' and 'enum adc_therm' [-Wenum-compare]
ab8500_btemp.c:551:25: warning: comparison between 'enum abx500_adc_therm' and 'enum adc_therm' [-Wenum-compare]
This patch fixes the issue by switching the driver to use more
namespace-friendly enum.
Signed-off-by: Anton Vorontsov <anton.vorontsov@...aro.org>
---
drivers/power/ab8500_btemp.c | 13 +++++++------
include/linux/mfd/abx500/ab8500-bm.h | 15 ++-------------
2 files changed, 9 insertions(+), 19 deletions(-)
diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c
index 443bc7d..d8bb993 100644
--- a/drivers/power/ab8500_btemp.c
+++ b/drivers/power/ab8500_btemp.c
@@ -147,7 +147,7 @@ static int ab8500_btemp_batctrl_volt_to_res(struct ab8500_btemp *di,
return (450000 * (v_batctrl)) / (1800 - v_batctrl);
}
- if (di->bat->adc_therm == ADC_THERM_BATCTRL) {
+ if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL) {
/*
* If the battery has internal NTC, we use the current
* source to calculate the resistance, 7uA or 20uA
@@ -209,7 +209,7 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di,
return 0;
/* Only do this for batteries with internal NTC */
- if (di->bat->adc_therm == ADC_THERM_BATCTRL && enable) {
+ if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) {
if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_7UA)
curr = BAT_CTRL_7U_ENA;
else
@@ -241,7 +241,7 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di,
__func__);
goto disable_curr_source;
}
- } else if (di->bat->adc_therm == ADC_THERM_BATCTRL && !enable) {
+ } else if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) {
dev_dbg(di->dev, "Disable BATCTRL curr source\n");
/* Write 0 to the curr bits */
@@ -459,7 +459,7 @@ static int ab8500_btemp_measure_temp(struct ab8500_btemp *di)
id = di->bat->batt_id;
- if (di->bat->adc_therm == ADC_THERM_BATCTRL &&
+ if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL &&
id != BATTERY_UNKNOWN) {
rbat = ab8500_btemp_get_batctrl_res(di);
@@ -528,7 +528,7 @@ static int ab8500_btemp_id(struct ab8500_btemp *di)
dev_dbg(di->dev, "Battery detected on %s"
" low %d < res %d < high: %d"
" index: %d\n",
- di->bat->adc_therm == ADC_THERM_BATCTRL ?
+ di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL ?
"BATCTRL" : "BATTEMP",
di->bat->bat_type[i].resis_low, res,
di->bat->bat_type[i].resis_high, i);
@@ -548,7 +548,8 @@ static int ab8500_btemp_id(struct ab8500_btemp *di)
* We only have to change current source if the
* detected type is Type 1, else we use the 7uA source
*/
- if (di->bat->adc_therm == ADC_THERM_BATCTRL && di->bat->batt_id == 1) {
+ if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL &&
+ di->bat->batt_id == 1) {
dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n");
di->curr_source = BTEMP_BATCTRL_CURR_SRC_20UA;
}
diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h
index 4b7342c..f61b7b9 100644
--- a/include/linux/mfd/abx500/ab8500-bm.h
+++ b/include/linux/mfd/abx500/ab8500-bm.h
@@ -9,6 +9,7 @@
#define _AB8500_BM_H
#include <linux/kernel.h>
+#include <linux/mfd/abx500.h>
/*
* System control 2 register offsets.
@@ -231,18 +232,6 @@
/* Battery type */
#define BATTERY_UNKNOWN 00
-/*
- * ADC for the battery thermistor.
- * When using the ADC_THERM_BATCTRL the battery ID resistor is combined with
- * a NTC resistor to both identify the battery and to measure its temperature.
- * Different phone manufactures uses different techniques to both identify the
- * battery and to read its temperature.
- */
-enum adc_therm {
- ADC_THERM_BATCTRL,
- ADC_THERM_BATTEMP,
-};
-
/**
* struct res_to_temp - defines one point in a temp to res curve. To
* be used in battery packs that combines the identification resistor with a
@@ -464,7 +453,7 @@ struct ab8500_bm_data {
bool no_maintenance;
bool chg_unknown_bat;
bool enable_overshoot;
- enum adc_therm adc_therm;
+ enum abx500_adc_therm adc_therm;
int fg_res;
int n_btypes;
int batt_id;
--
1.7.9
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists