| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 15 Mar 2012 18:39:47 +0100
From: Joerg Roedel <joerg.roedel@....com>
To: <iommu@...ts.linux-foundation.org>
CC: <linux-kernel@...r.kernel.org>,
David Woodhouse <dwmw2@...radead.org>,
Alex Williamson <alex.williamson@...hat.com>,
Ingo Molnar <mingo@...e.hu>,
Thomas Gleixner <tglx@...utronix.de>,
Suresh Siddha <suresh.b.siddha@...el.com>,
Yinghai Lu <yinghai@...nel.org>,
Joerg Roedel <joerg.roedel@....com>
Subject: [PATCH 5/9] iommu/vt-d: Convert IR ioapic-setup to use remap_ops
The IOAPIC setup routine for interrupt remapping is VT-d
specific. Move it to the irq_remap_ops and add a call helper
function.
Signed-off-by: Joerg Roedel <joerg.roedel@....com>
---
arch/x86/include/asm/intr_remapping.h | 15 +++++-
arch/x86/kernel/apic/io_apic.c | 68 +------------------------
drivers/iommu/intel_intr_remapping.c | 89 +++++++++++++++++++++++++++++++++
drivers/iommu/intr_remapping.c | 12 +++++
drivers/iommu/intr_remapping.h | 8 +++
5 files changed, 125 insertions(+), 67 deletions(-)
diff --git a/arch/x86/include/asm/intr_remapping.h b/arch/x86/include/asm/intr_remapping.h
index 55aa892..a22e1f1 100644
--- a/arch/x86/include/asm/intr_remapping.h
+++ b/arch/x86/include/asm/intr_remapping.h
@@ -24,6 +24,9 @@
#ifdef CONFIG_IRQ_REMAP
+struct IO_APIC_route_entry;
+struct io_apic_irq_attr;
+
extern int intr_remapping_enabled;
extern void setup_intr_remapping(void);
@@ -33,6 +36,10 @@ extern int intr_hardware_enable(void);
extern void intr_hardware_disable(void);
extern int intr_hardware_reenable(int);
extern int intr_enable_fault_handling(void);
+extern int intr_setup_ioapic_entry(int irq,
+ struct IO_APIC_route_entry *entry,
+ unsigned int destination, int vector,
+ struct io_apic_irq_attr *attr);
#else /* CONFIG_IRQ_REMAP */
@@ -45,7 +52,13 @@ static inline int intr_hardware_enable(void) { return -ENODEV; }
static inline void intr_hardware_disable(void) { }
static inline int intr_hardware_reenable(int eim) { return -ENODEV; }
static inline int intr_enable_fault_handling(void) { return -ENODEV; }
-
+static inline int intr_setup_ioapic_entry(int irq,
+ struct IO_APIC_route_entry *entry,
+ unsigned int destination, int vector,
+ struct io_apic_irq_attr *attr)
+{
+ return -ENODEV;
+}
#endif /* CONFIG_IRQ_REMAP */
#endif /* __X86_INTR_REMAPPING_H */
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 6c00161..4746ba1 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1323,77 +1323,13 @@ static void ioapic_register_intr(unsigned int irq, struct irq_cfg *cfg,
fasteoi ? "fasteoi" : "edge");
}
-
-static int setup_ir_ioapic_entry(int irq,
- struct IR_IO_APIC_route_entry *entry,
- unsigned int destination, int vector,
- struct io_apic_irq_attr *attr)
-{
- int index;
- struct irte irte;
- int ioapic_id = mpc_ioapic_id(attr->ioapic);
- struct intel_iommu *iommu = map_ioapic_to_ir(ioapic_id);
-
- if (!iommu) {
- pr_warn("No mapping iommu for ioapic %d\n", ioapic_id);
- return -ENODEV;
- }
-
- index = alloc_irte(iommu, irq, 1);
- if (index < 0) {
- pr_warn("Failed to allocate IRTE for ioapic %d\n", ioapic_id);
- return -ENOMEM;
- }
-
- prepare_irte(&irte, vector, destination);
-
- /* Set source-id of interrupt request */
- set_ioapic_sid(&irte, ioapic_id);
-
- modify_irte(irq, &irte);
-
- apic_printk(APIC_VERBOSE, KERN_DEBUG "IOAPIC[%d]: "
- "Set IRTE entry (P:%d FPD:%d Dst_Mode:%d "
- "Redir_hint:%d Trig_Mode:%d Dlvry_Mode:%X "
- "Avail:%X Vector:%02X Dest:%08X "
- "SID:%04X SQ:%X SVT:%X)\n",
- attr->ioapic, irte.present, irte.fpd, irte.dst_mode,
- irte.redir_hint, irte.trigger_mode, irte.dlvry_mode,
- irte.avail, irte.vector, irte.dest_id,
- irte.sid, irte.sq, irte.svt);
-
- memset(entry, 0, sizeof(*entry));
-
- entry->index2 = (index >> 15) & 0x1;
- entry->zero = 0;
- entry->format = 1;
- entry->index = (index & 0x7fff);
- /*
- * IO-APIC RTE will be configured with virtual vector.
- * irq handler will do the explicit EOI to the io-apic.
- */
- entry->vector = attr->ioapic_pin;
- entry->mask = 0; /* enable IRQ */
- entry->trigger = attr->trigger;
- entry->polarity = attr->polarity;
-
- /* Mask level triggered irqs.
- * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
- */
- if (attr->trigger)
- entry->mask = 1;
-
- return 0;
-}
-
static int setup_ioapic_entry(int irq, struct IO_APIC_route_entry *entry,
unsigned int destination, int vector,
struct io_apic_irq_attr *attr)
{
if (intr_remapping_enabled)
- return setup_ir_ioapic_entry(irq,
- (struct IR_IO_APIC_route_entry *)entry,
- destination, vector, attr);
+ return intr_setup_ioapic_entry(irq, entry, destination,
+ vector, attr);
memset(entry, 0, sizeof(*entry));
diff --git a/drivers/iommu/intel_intr_remapping.c b/drivers/iommu/intel_intr_remapping.c
index 610b75b..f495eba 100644
--- a/drivers/iommu/intel_intr_remapping.c
+++ b/drivers/iommu/intel_intr_remapping.c
@@ -31,6 +31,7 @@ struct hpet_scope {
};
#define IR_X2APIC_MODE(mode) (mode ? (1 << 11) : 0)
+#define IRTE_DEST(dest) ((x2apic_mode) ? dest : dest << 8)
static struct ioapic_scope ir_ioapic[MAX_IO_APICS];
static struct hpet_scope ir_hpet[MAX_HPET_TBS];
@@ -814,6 +815,93 @@ error:
return -1;
}
+static void prepare_irte(struct irte *irte, int vector,
+ unsigned int dest)
+{
+ memset(irte, 0, sizeof(*irte));
+
+ irte->present = 1;
+ irte->dst_mode = apic->irq_dest_mode;
+ /*
+ * Trigger mode in the IRTE will always be edge, and for IO-APIC, the
+ * actual level or edge trigger will be setup in the IO-APIC
+ * RTE. This will help simplify level triggered irq migration.
+ * For more details, see the comments (in io_apic.c) explainig IO-APIC
+ * irq migration in the presence of interrupt-remapping.
+ */
+ irte->trigger_mode = 0;
+ irte->dlvry_mode = apic->irq_delivery_mode;
+ irte->vector = vector;
+ irte->dest_id = IRTE_DEST(dest);
+ irte->redir_hint = 1;
+}
+
+static int intel_setup_ioapic_entry(int irq,
+ struct IO_APIC_route_entry *route_entry,
+ unsigned int destination, int vector,
+ struct io_apic_irq_attr *attr)
+{
+ int ioapic_id = mpc_ioapic_id(attr->ioapic);
+ struct intel_iommu *iommu = map_ioapic_to_ir(ioapic_id);
+ struct IR_IO_APIC_route_entry *entry;
+ struct irte irte;
+ int index;
+
+ if (!iommu) {
+ pr_warn("No mapping iommu for ioapic %d\n", ioapic_id);
+ return -ENODEV;
+ }
+
+ entry = (struct IR_IO_APIC_route_entry *)route_entry;
+
+ index = alloc_irte(iommu, irq, 1);
+ if (index < 0) {
+ pr_warn("Failed to allocate IRTE for ioapic %d\n", ioapic_id);
+ return -ENOMEM;
+ }
+
+ prepare_irte(&irte, vector, destination);
+
+ /* Set source-id of interrupt request */
+ set_ioapic_sid(&irte, ioapic_id);
+
+ modify_irte(irq, &irte);
+
+ apic_printk(APIC_VERBOSE, KERN_DEBUG "IOAPIC[%d]: "
+ "Set IRTE entry (P:%d FPD:%d Dst_Mode:%d "
+ "Redir_hint:%d Trig_Mode:%d Dlvry_Mode:%X "
+ "Avail:%X Vector:%02X Dest:%08X "
+ "SID:%04X SQ:%X SVT:%X)\n",
+ attr->ioapic, irte.present, irte.fpd, irte.dst_mode,
+ irte.redir_hint, irte.trigger_mode, irte.dlvry_mode,
+ irte.avail, irte.vector, irte.dest_id,
+ irte.sid, irte.sq, irte.svt);
+
+ memset(entry, 0, sizeof(*entry));
+
+ entry->index2 = (index >> 15) & 0x1;
+ entry->zero = 0;
+ entry->format = 1;
+ entry->index = (index & 0x7fff);
+ /*
+ * IO-APIC RTE will be configured with virtual vector.
+ * irq handler will do the explicit EOI to the io-apic.
+ */
+ entry->vector = attr->ioapic_pin;
+ entry->mask = 0; /* enable IRQ */
+ entry->trigger = attr->trigger;
+ entry->polarity = attr->polarity;
+
+ /* Mask level triggered irqs.
+ * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
+ */
+ if (attr->trigger)
+ entry->mask = 1;
+
+ return 0;
+}
+
+
struct irq_remap_ops intel_irq_remap_ops = {
.supported = intel_intr_remapping_supported,
.hardware_init = dmar_table_init,
@@ -821,4 +909,5 @@ struct irq_remap_ops intel_irq_remap_ops = {
.hardware_disable = disable_intr_remapping,
.hardware_reenable = reenable_intr_remapping,
.enable_faulting = enable_drhd_fault_handling,
+ .setup_ioapic_entry = intel_setup_ioapic_entry,
};
diff --git a/drivers/iommu/intr_remapping.c b/drivers/iommu/intr_remapping.c
index 9aabed7..739148a 100644
--- a/drivers/iommu/intr_remapping.c
+++ b/drivers/iommu/intr_remapping.c
@@ -98,3 +98,15 @@ int __init intr_enable_fault_handling(void)
return remap_ops->enable_faulting();
}
+
+int intr_setup_ioapic_entry(int irq,
+ struct IO_APIC_route_entry *entry,
+ unsigned int destination, int vector,
+ struct io_apic_irq_attr *attr)
+{
+ if (!remap_ops || !remap_ops->setup_ioapic_entry)
+ return -ENODEV;
+
+ return remap_ops->setup_ioapic_entry(irq, entry, destination,
+ vector, attr);
+}
diff --git a/drivers/iommu/intr_remapping.h b/drivers/iommu/intr_remapping.h
index 2744c9a..e8994f2 100644
--- a/drivers/iommu/intr_remapping.h
+++ b/drivers/iommu/intr_remapping.h
@@ -24,6 +24,9 @@
#ifdef CONFIG_IRQ_REMAP
+struct IO_APIC_route_entry;
+struct io_apic_irq_attr;
+
extern int disable_intremap;
extern int disable_sourceid_checking;
extern int no_x2apic_optout;
@@ -46,6 +49,11 @@ struct irq_remap_ops {
/* Enable fault handling */
int (*enable_faulting)(void);
+
+ /* IO-APIC setup routine */
+ int (*setup_ioapic_entry)(int irq, struct IO_APIC_route_entry *,
+ unsigned int, int,
+ struct io_apic_irq_attr *);
};
extern struct irq_remap_ops intel_irq_remap_ops;
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists