[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAEnQRZBDxB5Vb7XTFKmdrvQOcWKQU0SWO4HExvDmFbEv_AMnQw@mail.gmail.com>
Date: Thu, 15 Mar 2012 22:17:27 +0200
From: Daniel Baluta <daniel.baluta@...il.com>
To: alexandrasava18@...il.com
Cc: gregkh@...uxfoundation.org, pavan_savoy@...com, mgherzan@...il.com,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] ti-st: Enhange logging for Shared Transport - TI driver
Adding Greg's new email address.
On Thu, Mar 15, 2012 at 8:26 PM, <alexandrasava18@...il.com> wrote:
> From: Alexandra Sava <alexandrasava18@...il.com>
>
> * added new module parameter named debug_mask to control displayed
> messages verbosity
> * the logging mechanism is enabled via CONFIG_TI_ST_DEBUG Kconfig option
>
> Signed-off-by: Alexandra Sava <alexandrasava18@...il.com>
> ---
> drivers/misc/ti-st/Kconfig | 7 ++
> drivers/misc/ti-st/debug.h | 34 +++++++++
> drivers/misc/ti-st/st_core.c | 153 +++++++++++++++++++-----------------------
> drivers/misc/ti-st/st_kim.c | 126 +++++++++++++++++-----------------
> drivers/misc/ti-st/st_ll.c | 28 ++++----
> 5 files changed, 187 insertions(+), 161 deletions(-)
> create mode 100644 drivers/misc/ti-st/debug.h
>
> diff --git a/drivers/misc/ti-st/Kconfig b/drivers/misc/ti-st/Kconfig
> index abb5de1..6d4e6a3 100644
> --- a/drivers/misc/ti-st/Kconfig
> +++ b/drivers/misc/ti-st/Kconfig
> @@ -14,4 +14,11 @@ config TI_ST
> are returned to relevant protocol drivers based on their
> packet types.
>
> +if TI_ST
> +config TI_ST_DEBUG
> + bool "Enable full debugging output for the Shared transport core driver"
> + depends on TI_ST
> + ---help---
> + Debugging support.
> +endif # TI_ST
> endmenu
> diff --git a/drivers/misc/ti-st/debug.h b/drivers/misc/ti-st/debug.h
> new file mode 100644
> index 0000000..68ffc74
> --- /dev/null
> +++ b/drivers/misc/ti-st/debug.h
> @@ -0,0 +1,34 @@
> +#ifndef TI_ST_DEBUG_H
> +#define TI_ST_DEBUG_H
> +
> +enum TI_ST_DEBUG_MASK {
> + TI_ST_DBG_HCI_LL = 0x0001, /* HCI_LL protocol */
> + TI_ST_DBG_KIM = 0x0002, /* GPIO control and firmware download */
> + TI_ST_DBG_CORE = 0x0003, /* ST KIM driver and ST LL driver */
> + TI_ST_DBG_ALL = 0xffff /* enable all logs */
> +};
> +
> +extern unsigned short debug_mask;
> +
> +#define ti_st_info(fmt, ...) \
> + pr_info(fmt, ##__VA_ARGS__);
> +#define ti_st_err(fmt, ...) \
> + pr_err(fmt, ##__VA_ARGS__);
> +#define ti_st_warn(fmt, ...) \
> + pr_warn(fmt, ##__VA_ARGS__);
> +
> +
> +#ifdef CONFIG_TI_ST_DEBUG
> +#define ti_st_dbg(mask, fmt, ...) \
> + ({ \
> + if (debug_mask & mask) \
> + pr_debug(fmt, ##__VA_ARGS__); \
> + })
> +#else
> +static inline void ti_st_dbg(enum TI_ST_DEBUG_MASK dbg_mask,
> + const char *fmt, ...)
> +{
> +}
> +
> +#endif
> +#endif
> diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
> index 2b62232..245cf31 100644
> --- a/drivers/misc/ti-st/st_core.c
> +++ b/drivers/misc/ti-st/st_core.c
> @@ -1,4 +1,5 @@
> /*
> +
> * Shared Transport Line discipline driver Core
> * This hooks up ST KIM driver and ST LL driver
> * Copyright (C) 2009-2010 Texas Instruments
> @@ -29,6 +30,7 @@
> #include <linux/skbuff.h>
>
> #include <linux/ti_wilink_st.h>
> +#include "debug.h"
>
> /* function pointer pointing to either,
> * st_kim_recv during registration to receive fw download responses
> @@ -40,7 +42,7 @@ void (*st_recv) (void*, const unsigned char*, long);
> static void add_channel_to_table(struct st_data_s *st_gdata,
> struct st_proto_s *new_proto)
> {
> - pr_info("%s: id %d\n", __func__, new_proto->chnl_id);
> + ti_st_dbg(TI_ST_DBG_CORE, "%s: id %d\n", __func__, new_proto->chnl_id);
> /* list now has the channel id as index itself */
> st_gdata->list[new_proto->chnl_id] = new_proto;
> st_gdata->is_registered[new_proto->chnl_id] = true;
> @@ -49,7 +51,7 @@ static void add_channel_to_table(struct st_data_s *st_gdata,
> static void remove_channel_from_table(struct st_data_s *st_gdata,
> struct st_proto_s *proto)
> {
> - pr_info("%s: id %d\n", __func__, proto->chnl_id);
> + ti_st_dbg(TI_ST_DBG_CORE, "%s: id %d\n", __func__, proto->chnl_id);
> /* st_gdata->list[proto->chnl_id] = NULL; */
> st_gdata->is_registered[proto->chnl_id] = false;
> }
> @@ -65,7 +67,7 @@ int st_get_uart_wr_room(struct st_data_s *st_gdata)
> {
> struct tty_struct *tty;
> if (unlikely(st_gdata == NULL || st_gdata->tty == NULL)) {
> - pr_err("tty unavailable to perform write");
> + ti_st_err("tty unavailable to perform write");
> return -1;
> }
> tty = st_gdata->tty;
> @@ -84,7 +86,7 @@ int st_int_write(struct st_data_s *st_gdata,
> {
> struct tty_struct *tty;
> if (unlikely(st_gdata == NULL || st_gdata->tty == NULL)) {
> - pr_err("tty unavailable to perform write");
> + ti_st_err("tty unavailable to perform write");
> return -EINVAL;
> }
> tty = st_gdata->tty;
> @@ -102,12 +104,12 @@ int st_int_write(struct st_data_s *st_gdata,
> */
> void st_send_frame(unsigned char chnl_id, struct st_data_s *st_gdata)
> {
> - pr_debug(" %s(prot:%d) ", __func__, chnl_id);
> + ti_st_dbg(TI_ST_DBG_CORE, " %s(prot:%d) ", __func__, chnl_id);
>
> if (unlikely
> (st_gdata == NULL || st_gdata->rx_skb == NULL
> || st_gdata->is_registered[chnl_id] == false)) {
> - pr_err("chnl_id %d not registered, no data to send?",
> + ti_st_err("chnl_id %d not registered, no data to send?",
> chnl_id);
> kfree_skb(st_gdata->rx_skb);
> return;
> @@ -122,12 +124,12 @@ void st_send_frame(unsigned char chnl_id, struct st_data_s *st_gdata)
> (st_gdata->list[chnl_id]->recv
> (st_gdata->list[chnl_id]->priv_data, st_gdata->rx_skb)
> != 0)) {
> - pr_err(" proto stack %d's ->recv failed", chnl_id);
> + ti_st_err(" proto stack %d's ->recv failed", chnl_id);
> kfree_skb(st_gdata->rx_skb);
> return;
> }
> } else {
> - pr_err(" proto stack %d's ->recv null", chnl_id);
> + ti_st_err(" proto stack %d's ->recv null", chnl_id);
> kfree_skb(st_gdata->rx_skb);
> }
> return;
> @@ -143,14 +145,15 @@ void st_send_frame(unsigned char chnl_id, struct st_data_s *st_gdata)
> void st_reg_complete(struct st_data_s *st_gdata, char err)
> {
> unsigned char i = 0;
> - pr_info(" %s ", __func__);
> +
> for (i = 0; i < ST_MAX_CHANNELS; i++) {
> if (likely(st_gdata != NULL &&
> st_gdata->is_registered[i] == true &&
> st_gdata->list[i]->reg_complete_cb != NULL)) {
> st_gdata->list[i]->reg_complete_cb
> (st_gdata->list[i]->priv_data, err);
> - pr_info("protocol %d's cb sent %d\n", i, err);
> + ti_st_dbg(TI_ST_DBG_KIM, "protocol %d's cb "
> + "sent %d\n", i, err);
> if (err) { /* cleanup registered protocol */
> st_gdata->protos_registered--;
> st_gdata->is_registered[i] = false;
> @@ -164,8 +167,6 @@ static inline int st_check_data_len(struct st_data_s *st_gdata,
> {
> int room = skb_tailroom(st_gdata->rx_skb);
>
> - pr_debug("len %d room %d", len, room);
> -
> if (!len) {
> /* Received packet has only packet header and
> * has zero length payload. So, ask ST CORE to
> @@ -177,7 +178,7 @@ static inline int st_check_data_len(struct st_data_s *st_gdata,
> /* Received packet's payload length is larger.
> * We can't accommodate it in created skb.
> */
> - pr_err("Data length is too large len %d room %d", len,
> + ti_st_err("Data length is too large len %d room %d", len,
> room);
> kfree_skb(st_gdata->rx_skb);
> } else {
> @@ -201,7 +202,7 @@ static inline int st_check_data_len(struct st_data_s *st_gdata,
>
> /**
> * st_wakeup_ack - internal function for action when wake-up ack
> - * received
> + * received
> */
> static inline void st_wakeup_ack(struct st_data_s *st_gdata,
> unsigned char cmd)
> @@ -244,15 +245,14 @@ void st_int_recv(void *disc_data,
> unsigned long flags;
>
> ptr = (char *)data;
> - /* tty_receive sent null ? */
> if (unlikely(ptr == NULL) || (st_gdata == NULL)) {
> - pr_err(" received null from TTY ");
> + ti_st_err(" received null from TTY ");
> return;
> }
>
> - pr_debug("count %ld rx_state %ld"
> - "rx_count %ld", count, st_gdata->rx_state,
> - st_gdata->rx_count);
> + ti_st_dbg(TI_ST_DBG_CORE, "%s: count %ld rx_state %ld"
> + "rx_count %ld", __func__, count, st_gdata->rx_state,
> + st_gdata->rx_count);
>
> spin_lock_irqsave(&st_gdata->lock, flags);
> /* Decode received bytes here */
> @@ -271,7 +271,7 @@ void st_int_recv(void *disc_data,
> switch (st_gdata->rx_state) {
> /* Waiting for complete packet ? */
> case ST_W4_DATA:
> - pr_debug("Complete pkt received");
> + ti_st_dbg(TI_ST_DBG_CORE, "Complete pkt received");
> /* Ask ST CORE to forward
> * the packet to protocol driver */
> st_send_frame(st_gdata->rx_chnl, st_gdata);
> @@ -285,32 +285,28 @@ void st_int_recv(void *disc_data,
> plen =
> &st_gdata->rx_skb->data
> [proto->offset_len_in_hdr];
> - pr_debug("plen pointing to %x\n", *plen);
> if (proto->len_size == 1)/* 1 byte len field */
> payload_len = *(unsigned char *)plen;
> else if (proto->len_size == 2)
> payload_len =
> __le16_to_cpu(*(unsigned short *)plen);
> else
> - pr_info("%s: invalid length "
> - "for id %d\n",
> - __func__, proto->chnl_id);
> + ti_st_dbg(TI_ST_DBG_CORE, "%s: invalid length"
> + "for id %d\n", __func__, proto->chnl_id);
> +
> st_check_data_len(st_gdata, proto->chnl_id,
> payload_len);
> - pr_debug("off %d, pay len %d\n",
> - proto->offset_len_in_hdr, payload_len);
> continue;
> - } /* end of switch rx_state */
> + }
> }
>
> - /* end of if rx_count */
> /* Check first byte of packet and identify module
> * owner (BT/FM/GPS) */
> switch (*ptr) {
> case LL_SLEEP_IND:
> case LL_SLEEP_ACK:
> case LL_WAKE_UP_IND:
> - pr_debug("PM packet");
> + ti_st_dbg(TI_ST_DBG_CORE, "PM packet");
> /* this takes appropriate action based on
> * sleep state received --
> */
> @@ -327,8 +323,7 @@ void st_int_recv(void *disc_data,
> count--;
> continue;
> case LL_WAKE_UP_ACK:
> - pr_debug("PM packet");
> -
> + ti_st_dbg(TI_ST_DBG_CORE, "PM packet");
> spin_unlock_irqrestore(&st_gdata->lock, flags);
> /* wake up ack received */
> st_wakeup_ack(st_gdata, *ptr);
> @@ -341,10 +336,9 @@ void st_int_recv(void *disc_data,
> default:
> type = *ptr;
> if (st_gdata->list[type] == NULL) {
> - pr_err("chip/interface misbehavior dropping"
> + ti_st_err("chip/interface misbehavior dropping"
> " frame starting with 0x%02x", type);
> goto done;
> -
> }
> st_gdata->rx_skb = alloc_skb(
> st_gdata->list[type]->max_frame_size,
> @@ -352,19 +346,19 @@ void st_int_recv(void *disc_data,
> skb_reserve(st_gdata->rx_skb,
> st_gdata->list[type]->reserve);
> /* next 2 required for BT only */
> - st_gdata->rx_skb->cb[0] = type; /*pkt_type*/
> - st_gdata->rx_skb->cb[1] = 0; /*incoming*/
> + st_gdata->rx_skb->cb[0] = type; /* pkt_type */
> + st_gdata->rx_skb->cb[1] = 0; /* incoming */
> st_gdata->rx_chnl = *ptr;
> st_gdata->rx_state = ST_W4_HEADER;
> st_gdata->rx_count = st_gdata->list[type]->hdr_len;
> - pr_debug("rx_count %ld\n", st_gdata->rx_count);
> + ti_st_dbg(TI_ST_DBG_CORE, "%s: rx_count %ld\n", __func__,
> + st_gdata->rx_count);
> };
> ptr++;
> count--;
> }
> done:
> spin_unlock_irqrestore(&st_gdata->lock, flags);
> - pr_debug("done %s", __func__);
> return;
> }
>
> @@ -378,7 +372,6 @@ struct sk_buff *st_int_dequeue(struct st_data_s *st_gdata)
> {
> struct sk_buff *returning_skb;
>
> - pr_debug("%s", __func__);
> if (st_gdata->tx_skb != NULL) {
> returning_skb = st_gdata->tx_skb;
> st_gdata->tx_skb = NULL;
> @@ -400,19 +393,18 @@ void st_int_enqueue(struct st_data_s *st_gdata, struct sk_buff *skb)
> {
> unsigned long flags = 0;
>
> - pr_debug("%s", __func__);
> spin_lock_irqsave(&st_gdata->lock, flags);
>
> switch (st_ll_getstate(st_gdata)) {
> case ST_LL_AWAKE:
> - pr_debug("ST LL is AWAKE, sending normally");
> + ti_st_dbg(TI_ST_DBG_CORE, "ST LL is AWAKE, sending normally");
> skb_queue_tail(&st_gdata->txq, skb);
> break;
> case ST_LL_ASLEEP_TO_AWAKE:
> skb_queue_tail(&st_gdata->tx_waitq, skb);
> break;
> case ST_LL_AWAKE_TO_ASLEEP:
> - pr_err("ST LL is illegal state(%ld),"
> + ti_st_err("ST LL is illegal state(%ld),"
> "purging received skb.", st_ll_getstate(st_gdata));
> kfree_skb(skb);
> break;
> @@ -421,14 +413,13 @@ void st_int_enqueue(struct st_data_s *st_gdata, struct sk_buff *skb)
> st_ll_wakeup(st_gdata);
> break;
> default:
> - pr_err("ST LL is illegal state(%ld),"
> + ti_st_err("ST LL is illegal state(%ld),"
> "purging received skb.", st_ll_getstate(st_gdata));
> kfree_skb(skb);
> break;
> }
>
> spin_unlock_irqrestore(&st_gdata->lock, flags);
> - pr_debug("done %s", __func__);
> return;
> }
>
> @@ -442,10 +433,10 @@ void st_tx_wakeup(struct st_data_s *st_data)
> {
> struct sk_buff *skb;
> unsigned long flags; /* for irq save flags */
> - pr_debug("%s", __func__);
> +
> /* check for sending & set flag sending here */
> if (test_and_set_bit(ST_TX_SENDING, &st_data->tx_state)) {
> - pr_debug("ST already sending");
> + ti_st_dbg(TI_ST_DBG_CORE, "ST already sending");
> /* keep sending */
> set_bit(ST_TX_WAKEUP, &st_data->tx_state);
> return;
> @@ -499,25 +490,25 @@ void kim_st_list_protocols(struct st_data_s *st_gdata, void *buf)
> */
> long st_register(struct st_proto_s *new_proto)
> {
> - struct st_data_s *st_gdata;
> + struct st_data_s *st_gdata;
> long err = 0;
> unsigned long flags = 0;
>
> st_kim_ref(&st_gdata, 0);
> - pr_info("%s(%d) ", __func__, new_proto->chnl_id);
> + ti_st_dbg(TI_ST_DBG_CORE, "%s(%d) ", __func__, new_proto->chnl_id);
> if (st_gdata == NULL || new_proto == NULL || new_proto->recv == NULL
> || new_proto->reg_complete_cb == NULL) {
> - pr_err("gdata/new_proto/recv or reg_complete_cb not ready");
> + ti_st_err("gdata/new_proto/recv or reg_complete_cb not ready");
> return -EINVAL;
> }
>
> if (new_proto->chnl_id >= ST_MAX_CHANNELS) {
> - pr_err("chnl_id %d not supported", new_proto->chnl_id);
> + ti_st_err("chnl_id %d not supported", new_proto->chnl_id);
> return -EPROTONOSUPPORT;
> }
>
> if (st_gdata->is_registered[new_proto->chnl_id] == true) {
> - pr_err("chnl_id %d already registered", new_proto->chnl_id);
> + ti_st_err("chnl_id %d already registered", new_proto->chnl_id);
> return -EALREADY;
> }
>
> @@ -525,7 +516,8 @@ long st_register(struct st_proto_s *new_proto)
> spin_lock_irqsave(&st_gdata->lock, flags);
>
> if (test_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state)) {
> - pr_info(" ST_REG_IN_PROGRESS:%d ", new_proto->chnl_id);
> + ti_st_dbg(TI_ST_DBG_CORE, " ST_REG_IN_PROGRESS:%d ",
> + new_proto->chnl_id);
> /* fw download in progress */
>
> add_channel_to_table(st_gdata, new_proto);
> @@ -536,7 +528,8 @@ long st_register(struct st_proto_s *new_proto)
> spin_unlock_irqrestore(&st_gdata->lock, flags);
> return -EINPROGRESS;
> } else if (st_gdata->protos_registered == ST_EMPTY) {
> - pr_info(" chnl_id list empty :%d ", new_proto->chnl_id);
> + ti_st_dbg(TI_ST_DBG_CORE, " chnl_id list empty :%d ",
> + new_proto->chnl_id);
> set_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
> st_recv = st_kim_recv;
>
> @@ -554,7 +547,7 @@ long st_register(struct st_proto_s *new_proto)
> clear_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
> if ((st_gdata->protos_registered != ST_EMPTY) &&
> (test_bit(ST_REG_PENDING, &st_gdata->st_state))) {
> - pr_err(" KIM failure complete callback ");
> + ti_st_err(" KIM failure complete callback ");
> st_reg_complete(st_gdata, err);
> clear_bit(ST_REG_PENDING, &st_gdata->st_state);
> }
> @@ -566,12 +559,12 @@ long st_register(struct st_proto_s *new_proto)
> clear_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
> st_recv = st_int_recv;
>
> - /* this is where all pending registration
> + /* this is where all pending registrations
> * are signalled to be complete by calling callback functions
> */
> if ((st_gdata->protos_registered != ST_EMPTY) &&
> (test_bit(ST_REG_PENDING, &st_gdata->st_state))) {
> - pr_debug(" call reg complete callback ");
> + ti_st_dbg(TI_ST_DBG_CORE, " call reg complete callback ");
> st_reg_complete(st_gdata, 0);
> }
> clear_bit(ST_REG_PENDING, &st_gdata->st_state);
> @@ -580,7 +573,7 @@ long st_register(struct st_proto_s *new_proto)
> * since the above check is old
> */
> if (st_gdata->is_registered[new_proto->chnl_id] == true) {
> - pr_err(" proto %d already registered ",
> + ti_st_err(" proto %d already registered ",
> new_proto->chnl_id);
> spin_unlock_irqrestore(&st_gdata->lock, flags);
> return -EALREADY;
> @@ -602,7 +595,6 @@ long st_register(struct st_proto_s *new_proto)
> spin_unlock_irqrestore(&st_gdata->lock, flags);
> return err;
> }
> - pr_debug("done %s(%d) ", __func__, new_proto->chnl_id);
> }
> EXPORT_SYMBOL_GPL(st_register);
>
> @@ -615,18 +607,18 @@ long st_unregister(struct st_proto_s *proto)
> unsigned long flags = 0;
> struct st_data_s *st_gdata;
>
> - pr_debug("%s: %d ", __func__, proto->chnl_id);
> + ti_st_dbg(TI_ST_DBG_CORE, "%s: %d ", __func__, proto->chnl_id);
>
> st_kim_ref(&st_gdata, 0);
> - if (!st_gdata || proto->chnl_id >= ST_MAX_CHANNELS) {
> - pr_err(" chnl_id %d not supported", proto->chnl_id);
> + if (!st_gdata || !proto || proto->chnl_id >= ST_MAX_CHANNELS) {
> + ti_st_err(" chnl_id %d not supported", proto->chnl_id);
> return -EPROTONOSUPPORT;
> }
>
> spin_lock_irqsave(&st_gdata->lock, flags);
>
> if (st_gdata->is_registered[proto->chnl_id] == false) {
> - pr_err(" chnl_id %d not registered", proto->chnl_id);
> + ti_st_err(" chnl_id %d not registered", proto->chnl_id);
> spin_unlock_irqrestore(&st_gdata->lock, flags);
> return -EPROTONOSUPPORT;
> }
> @@ -641,7 +633,7 @@ long st_unregister(struct st_proto_s *proto)
>
> if ((st_gdata->protos_registered == ST_EMPTY) &&
> (!test_bit(ST_REG_PENDING, &st_gdata->st_state))) {
> - pr_info(" all chnl_ids unregistered ");
> + ti_st_dbg(TI_ST_DBG_CORE, " all chnl_ids unregistered ");
>
> /* stop traffic on tty */
> if (st_gdata->tty) {
> @@ -669,11 +661,11 @@ long st_write(struct sk_buff *skb)
> st_kim_ref(&st_gdata, 0);
> if (unlikely(skb == NULL || st_gdata == NULL
> || st_gdata->tty == NULL)) {
> - pr_err("data/tty unavailable to perform write");
> + ti_st_err("data/tty unavailable to perform write");
> return -EINVAL;
> }
>
> - pr_debug("%d to be written", skb->len);
> + ti_st_dbg(TI_ST_DBG_CORE, "%d to be written", skb->len);
> len = skb->len;
>
> /* st_ll to decide where to enqueue the skb */
> @@ -696,7 +688,6 @@ static int st_tty_open(struct tty_struct *tty)
> {
> int err = 0;
> struct st_data_s *st_gdata;
> - pr_info("%s ", __func__);
>
> st_kim_ref(&st_gdata, 0);
> st_gdata->tty = tty;
> @@ -705,8 +696,7 @@ static int st_tty_open(struct tty_struct *tty)
> /* don't do an wakeup for now */
> clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
>
> - /* mem already allocated
> - */
> + /* mem already allocated */
> tty->receive_room = 65536;
> /* Flush any pending characters in the driver and discipline. */
> tty_ldisc_flush(tty);
> @@ -716,7 +706,6 @@ static int st_tty_open(struct tty_struct *tty)
> * installation of N_TI_WL ldisc is complete
> */
> st_kim_complete(st_gdata->kim_data);
> - pr_debug("done %s", __func__);
> return err;
> }
>
> @@ -726,8 +715,6 @@ static void st_tty_close(struct tty_struct *tty)
> unsigned long flags = 0;
> struct st_data_s *st_gdata = tty->disc_data;
>
> - pr_info("%s ", __func__);
> -
> /* TODO:
> * if a protocol has been registered & line discipline
> * un-installed for some reason - what should be done ?
> @@ -735,7 +722,7 @@ static void st_tty_close(struct tty_struct *tty)
> spin_lock_irqsave(&st_gdata->lock, flags);
> for (i = ST_BT; i < ST_MAX_CHANNELS; i++) {
> if (st_gdata->is_registered[i] == true)
> - pr_err("%d not un-registered", i);
> + ti_st_dbg(TI_ST_DBG_CORE, "%d not un-registered", i);
> st_gdata->list[i] = NULL;
> st_gdata->is_registered[i] = false;
> }
> @@ -761,8 +748,6 @@ static void st_tty_close(struct tty_struct *tty)
> kfree_skb(st_gdata->rx_skb);
> st_gdata->rx_skb = NULL;
> spin_unlock_irqrestore(&st_gdata->lock, flags);
> -
> - pr_debug("%s: done ", __func__);
> }
>
> static void st_tty_receive(struct tty_struct *tty, const unsigned char *data,
> @@ -778,7 +763,6 @@ static void st_tty_receive(struct tty_struct *tty, const unsigned char *data,
> * to KIM for validation
> */
> st_recv(tty->disc_data, data, count);
> - pr_debug("done %s", __func__);
> }
>
> /* wake-up function called in from the TTY layer
> @@ -787,7 +771,7 @@ static void st_tty_receive(struct tty_struct *tty, const unsigned char *data,
> static void st_tty_wakeup(struct tty_struct *tty)
> {
> struct st_data_s *st_gdata = tty->disc_data;
> - pr_debug("%s ", __func__);
> +
> /* don't do an wakeup for now */
> clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
>
> @@ -798,7 +782,6 @@ static void st_tty_wakeup(struct tty_struct *tty)
> static void st_tty_flush_buffer(struct tty_struct *tty)
> {
> struct st_data_s *st_gdata = tty->disc_data;
> - pr_debug("%s ", __func__);
>
> kfree_skb(st_gdata->tx_skb);
> st_gdata->tx_skb = NULL;
> @@ -826,18 +809,18 @@ int st_core_init(struct st_data_s **core_data)
>
> err = tty_register_ldisc(N_TI_WL, &st_ldisc_ops);
> if (err) {
> - pr_err("error registering %d line discipline %ld",
> - N_TI_WL, err);
> + ti_st_err("error registering %d line discipline %ld",
> + N_TI_WL, err);
> return err;
> }
> - pr_debug("registered n_shared line discipline");
> + ti_st_dbg(TI_ST_DBG_CORE, "registered n_shared line discipline");
>
> st_gdata = kzalloc(sizeof(struct st_data_s), GFP_KERNEL);
> if (!st_gdata) {
> - pr_err("memory allocation failed");
> + ti_st_err("memory allocation failed");
> err = tty_unregister_ldisc(N_TI_WL);
> if (err)
> - pr_err("unable to un-register ldisc %ld", err);
> + ti_st_err("unable to un-register ldisc %ld", err);
> err = -ENOMEM;
> return err;
> }
> @@ -853,11 +836,11 @@ int st_core_init(struct st_data_s **core_data)
>
> err = st_ll_init(st_gdata);
> if (err) {
> - pr_err("error during st_ll initialization(%ld)", err);
> + ti_st_err("error during st_ll initialization(%ld)", err);
> kfree(st_gdata);
> err = tty_unregister_ldisc(N_TI_WL);
> if (err)
> - pr_err("unable to un-register ldisc");
> + ti_st_err("unable to un-register ldisc");
> return err;
> }
> *core_data = st_gdata;
> @@ -870,7 +853,7 @@ void st_core_exit(struct st_data_s *st_gdata)
> /* internal module cleanup */
> err = st_ll_deinit(st_gdata);
> if (err)
> - pr_err("error during deinit of ST LL %ld", err);
> + ti_st_err("error during deinit of ST LL %ld", err);
>
> if (st_gdata != NULL) {
> /* Free ST Tx Qs and skbs */
> @@ -881,7 +864,7 @@ void st_core_exit(struct st_data_s *st_gdata)
> /* TTY ldisc cleanup */
> err = tty_unregister_ldisc(N_TI_WL);
> if (err)
> - pr_err("unable to un-register ldisc %ld", err);
> + ti_st_err("unable to un-register ldisc %ld", err);
> /* free the global data pointer */
> kfree(st_gdata);
> }
> diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
> index a7a861c..f6f6c30 100644
> --- a/drivers/misc/ti-st/st_kim.c
> +++ b/drivers/misc/ti-st/st_kim.c
> @@ -32,6 +32,7 @@
> #include <linux/sched.h>
> #include <linux/sysfs.h>
> #include <linux/tty.h>
> +#include "debug.h"
>
> #include <linux/skbuff.h>
> #include <linux/ti_wilink_st.h>
> @@ -41,6 +42,10 @@
> #define MAX_ST_DEVICES 3 /* Imagine 1 on each UART for now */
> static struct platform_device *st_kim_devices[MAX_ST_DEVICES];
>
> +/* if CONFIG_TI_ST_DEBUG is defined, enable all logs by default */
> +unsigned short debug_mask = 0xffff;
> +module_param(debug_mask, ushort, 0644);
> +
> /**********************************************************************/
> /* internal functions */
>
> @@ -54,7 +59,9 @@ static struct platform_device *st_kim_devices[MAX_ST_DEVICES];
> */
> static struct platform_device *st_get_plat_device(int id)
> {
> - return st_kim_devices[id];
> + if (id < MAX_ST_DEVICES)
> + return st_kim_devices[id];
> + return NULL;
> }
>
> /**
> @@ -67,8 +74,8 @@ void validate_firmware_response(struct kim_data_s *kim_gdata)
> {
> struct sk_buff *skb = kim_gdata->rx_skb;
> if (unlikely(skb->data[5] != 0)) {
> - pr_err("no proper response during fw download");
> - pr_err("data6 %x", skb->data[5]);
> + ti_st_err("no proper response during fw download");
> + ti_st_err("response num: %x", skb->data[5]);
> kfree_skb(skb);
> return; /* keep waiting for the proper response */
> }
> @@ -84,7 +91,7 @@ static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len)
> {
> register int room = skb_tailroom(kim_gdata->rx_skb);
>
> - pr_debug("len %d room %d", len, room);
> + ti_st_dbg(TI_ST_DBG_KIM, "%s: len %d room %d", __func__, len, room);
>
> if (!len) {
> validate_firmware_response(kim_gdata);
> @@ -92,8 +99,7 @@ static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len)
> /* Received packet's payload length is larger.
> * We can't accommodate it in created skb.
> */
> - pr_err("Data length is too large len %d room %d", len,
> - room);
> + ti_st_err("Data length is too large len %d room %d", len, room);
> kfree_skb(kim_gdata->rx_skb);
> } else {
> /* Packet header has non-zero payload length and
> @@ -126,11 +132,10 @@ void kim_int_recv(struct kim_data_s *kim_gdata,
> int len = 0, type = 0;
> unsigned char *plen;
>
> - pr_debug("%s", __func__);
> /* Decode received bytes here */
> ptr = data;
> if (unlikely(ptr == NULL)) {
> - pr_err(" received null from TTY ");
> + ti_st_err(" received null from TTY ");
> return;
> }
>
> @@ -149,7 +154,7 @@ void kim_int_recv(struct kim_data_s *kim_gdata,
> switch (kim_gdata->rx_state) {
> /* Waiting for complete packet ? */
> case ST_W4_DATA:
> - pr_debug("Complete pkt received");
> + ti_st_dbg(TI_ST_DBG_KIM, "Complete pkt received");
> validate_firmware_response(kim_gdata);
> kim_gdata->rx_state = ST_W4_PACKET_TYPE;
> kim_gdata->rx_skb = NULL;
> @@ -158,11 +163,11 @@ void kim_int_recv(struct kim_data_s *kim_gdata,
> case ST_W4_HEADER:
> plen =
> (unsigned char *)&kim_gdata->rx_skb->data[1];
> - pr_debug("event hdr: plen 0x%02x\n", *plen);
> + ti_st_dbg(TI_ST_DBG_KIM, "event hdr: plen 0x%02x\n", *plen);
> kim_check_data_len(kim_gdata, *plen);
> continue;
> - } /* end of switch */
> - } /* end of if rx_state */
> + }
> + }
> switch (*ptr) {
> /* Bluetooth event packet? */
> case 0x04:
> @@ -171,7 +176,7 @@ void kim_int_recv(struct kim_data_s *kim_gdata,
> type = *ptr;
> break;
> default:
> - pr_info("unknown packet");
> + ti_st_dbg(TI_ST_DBG_KIM, "%s: unknown packet", __func__);
> ptr++;
> count--;
> continue;
> @@ -181,7 +186,7 @@ void kim_int_recv(struct kim_data_s *kim_gdata,
> kim_gdata->rx_skb =
> alloc_skb(1024+8, GFP_ATOMIC);
> if (!kim_gdata->rx_skb) {
> - pr_err("can't allocate mem for new packet");
> + ti_st_err("can't allocate mem for new packet");
> kim_gdata->rx_state = ST_W4_PACKET_TYPE;
> kim_gdata->rx_count = 0;
> return;
> @@ -189,7 +194,6 @@ void kim_int_recv(struct kim_data_s *kim_gdata,
> skb_reserve(kim_gdata->rx_skb, 8);
> kim_gdata->rx_skb->cb[0] = 4;
> kim_gdata->rx_skb->cb[1] = 0;
> -
> }
> return;
> }
> @@ -199,17 +203,15 @@ static long read_local_version(struct kim_data_s *kim_gdata, char *bts_scr_name)
> unsigned short version = 0, chip = 0, min_ver = 0, maj_ver = 0;
> const char read_ver_cmd[] = { 0x01, 0x01, 0x10, 0x00 };
>
> - pr_debug("%s", __func__);
> -
> INIT_COMPLETION(kim_gdata->kim_rcvd);
> if (4 != st_int_write(kim_gdata->core_data, read_ver_cmd, 4)) {
> - pr_err("kim: couldn't write 4 bytes");
> + ti_st_err("kim: couldn't write 4 bytes");
> return -EIO;
> }
>
> if (!wait_for_completion_timeout
> (&kim_gdata->kim_rcvd, msecs_to_jiffies(CMD_RESP_TIME))) {
> - pr_err(" waiting for ver info- timed out ");
> + ti_st_err(" waiting for ver info - timed out ");
> return -ETIMEDOUT;
> }
> INIT_COMPLETION(kim_gdata->kim_rcvd);
> @@ -232,7 +234,8 @@ static long read_local_version(struct kim_data_s *kim_gdata, char *bts_scr_name)
> kim_gdata->version.maj_ver = maj_ver;
> kim_gdata->version.min_ver = min_ver;
>
> - pr_info("%s", bts_scr_name);
> + ti_st_dbg(TI_ST_DBG_KIM, "local_version - %s", bts_scr_name);
> +
> return 0;
> }
>
> @@ -245,14 +248,14 @@ void skip_change_remote_baud(unsigned char **ptr, long *len)
> ((struct bts_action *) cur_action)->size;
>
> if (((struct bts_action *) nxt_action)->type != ACTION_WAIT_EVENT) {
> - pr_err("invalid action after change remote baud command");
> + ti_st_err("invalid action after change remote baud command");
> } else {
> *ptr = *ptr + sizeof(struct bts_action) +
> ((struct bts_action *)cur_action)->size;
> *len = *len - (sizeof(struct bts_action) +
> ((struct bts_action *)cur_action)->size);
> /* warn user on not commenting these in firmware */
> - pr_warn("skipping the wait event of change remote baud");
> + ti_st_warn("skipping the wait event of change remote baud");
> }
> }
>
> @@ -274,7 +277,7 @@ static long download_firmware(struct kim_data_s *kim_gdata)
>
> err = read_local_version(kim_gdata, bts_scr_name);
> if (err != 0) {
> - pr_err("kim: failed to read local ver");
> + ti_st_err("kim: failed to read local ver");
> return err;
> }
> err =
> @@ -282,10 +285,11 @@ static long download_firmware(struct kim_data_s *kim_gdata)
> &kim_gdata->kim_pdev->dev);
> if (unlikely((err != 0) || (kim_gdata->fw_entry->data == NULL) ||
> (kim_gdata->fw_entry->size == 0))) {
> - pr_err(" request_firmware failed(errno %ld) for %s", err,
> - bts_scr_name);
> + ti_st_err(" request_firmware failed(errno %ld) for %s", err,
> + bts_scr_name);
> return -EINVAL;
> }
> +
> ptr = (void *)kim_gdata->fw_entry->data;
> len = kim_gdata->fw_entry->size;
> /* bts_header to remove out magic number and
> @@ -295,21 +299,21 @@ static long download_firmware(struct kim_data_s *kim_gdata)
> len -= sizeof(struct bts_header);
>
> while (len > 0 && ptr) {
> - pr_debug(" action size %d, type %d ",
> - ((struct bts_action *)ptr)->size,
> - ((struct bts_action *)ptr)->type);
> + ti_st_dbg(TI_ST_DBG_KIM, " action size %d, type %d ",
> + ((struct bts_action *)ptr)->size,
> + ((struct bts_action *)ptr)->type);
>
> switch (((struct bts_action *)ptr)->type) {
> case ACTION_SEND_COMMAND: /* action send */
> - pr_debug("S");
> + ti_st_dbg(TI_ST_DBG_KIM, "%s: send command", __func__);
> action_ptr = &(((struct bts_action *)ptr)->data[0]);
> if (unlikely
> (((struct hci_command *)action_ptr)->opcode ==
> 0xFF36)) {
> /* ignore remote change
> * baud rate HCI VS command */
> - pr_warn("change remote baud"
> - " rate command in firmware");
> + ti_st_warn("change remote baud rate command"
> + " in firmware");
> skip_change_remote_baud(&ptr, &len);
> break;
> }
> @@ -323,8 +327,8 @@ static long download_firmware(struct kim_data_s *kim_gdata)
> wr_room_space =
> st_get_uart_wr_room(kim_gdata->core_data);
> if (wr_room_space < 0) {
> - pr_err("Unable to get free "
> - "space info from uart tx buffer");
> + ti_st_err("Unable to get free space "
> + "info from uart tx buffer");
> release_firmware(kim_gdata->fw_entry);
> return wr_room_space;
> }
> @@ -334,7 +338,7 @@ static long download_firmware(struct kim_data_s *kim_gdata)
>
> /* Timeout happened ? */
> if (time_after_eq(jiffies, timeout)) {
> - pr_err("Timeout while waiting for free "
> + ti_st_err("Timeout while waiting for free "
> "free space in uart tx buffer");
> release_firmware(kim_gdata->fw_entry);
> return -ETIMEDOUT;
> @@ -361,19 +365,19 @@ static long download_firmware(struct kim_data_s *kim_gdata)
> * and requested command write size
> */
> if (err != cmd_size) {
> - pr_err("Number of bytes written to uart "
> - "tx buffer are not matching with "
> + ti_st_err("Number of bytes written to uart tx "
> + "buffer are not matching with "
> "requested cmd write size");
> release_firmware(kim_gdata->fw_entry);
> return -EIO;
> }
> break;
> case ACTION_WAIT_EVENT: /* wait */
> - pr_debug("W");
> + ti_st_dbg(TI_ST_DBG_KIM, "%s: wait event", __func__);
> if (!wait_for_completion_timeout
> (&kim_gdata->kim_rcvd,
> msecs_to_jiffies(CMD_RESP_TIME))) {
> - pr_err("response timeout during fw download ");
> + ti_st_err("response timeout during fw download");
> /* timed out */
> release_firmware(kim_gdata->fw_entry);
> return -ETIMEDOUT;
> @@ -381,7 +385,7 @@ static long download_firmware(struct kim_data_s *kim_gdata)
> INIT_COMPLETION(kim_gdata->kim_rcvd);
> break;
> case ACTION_DELAY: /* sleep */
> - pr_info("sleep command in scr");
> + ti_st_dbg(TI_ST_DBG_KIM, "%s: sleep command", __func__);
> action_ptr = &(((struct bts_action *)ptr)->data[0]);
> mdelay(((struct bts_action_delay *)action_ptr)->msec);
> break;
> @@ -395,6 +399,7 @@ static long download_firmware(struct kim_data_s *kim_gdata)
> }
> /* fw download complete */
> release_firmware(kim_gdata->fw_entry);
> + ti_st_dbg(TI_ST_DBG_KIM, "firmware dld compleated");
> return 0;
> }
>
> @@ -446,7 +451,6 @@ long st_kim_start(void *kim_data)
> struct ti_st_plat_data *pdata;
> struct kim_data_s *kim_gdata = (struct kim_data_s *)kim_data;
>
> - pr_info(" %s", __func__);
> pdata = kim_gdata->kim_pdev->dev.platform_data;
>
> do {
> @@ -463,7 +467,6 @@ long st_kim_start(void *kim_data)
> INIT_COMPLETION(kim_gdata->ldisc_installed);
> /* send notification to UIM */
> kim_gdata->ldisc_install = 1;
> - pr_info("ldisc_install = 1");
> sysfs_notify(&kim_gdata->kim_pdev->dev.kobj,
> NULL, "install");
> /* wait for ldisc to be installed */
> @@ -472,17 +475,17 @@ long st_kim_start(void *kim_data)
> if (!err) {
> /* ldisc installation timeout,
> * flush uart, power cycle BT_EN */
> - pr_err("ldisc installation timeout");
> + ti_st_err("ldisc installation timeout");
> err = st_kim_stop(kim_gdata);
> continue;
> } else {
> /* ldisc installed now */
> - pr_info("line discipline installed");
> + ti_st_dbg(TI_ST_DBG_KIM, "line discipline installed");
> err = download_firmware(kim_gdata);
> if (err != 0) {
> /* ldisc installed but fw download failed,
> * flush uart & power cycle BT_EN */
> - pr_err("download firmware failed");
> + ti_st_err("download firmware failed");
> err = st_kim_stop(kim_gdata);
> continue;
> } else { /* on success don't retry */
> @@ -521,7 +524,6 @@ long st_kim_stop(void *kim_data)
> }
>
> /* send uninstall notification to UIM */
> - pr_info("ldisc_install = 0");
> kim_gdata->ldisc_install = 0;
> sysfs_notify(&kim_gdata->kim_pdev->dev.kobj, NULL, "install");
>
> @@ -529,7 +531,7 @@ long st_kim_stop(void *kim_data)
> err = wait_for_completion_timeout(&kim_gdata->ldisc_installed,
> msecs_to_jiffies(LDISC_TIME));
> if (!err) { /* timeout */
> - pr_err(" timed out waiting for ldisc to be un-installed");
> + ti_st_err("timed out waiting for ldisc to be un-installed");
> return -ETIMEDOUT;
> }
>
> @@ -578,9 +580,9 @@ static ssize_t store_dev_name(struct device *dev,
> struct device_attribute *attr, const char *buf, size_t count)
> {
> struct kim_data_s *kim_data = dev_get_drvdata(dev);
> - pr_debug("storing dev name >%s<", buf);
> + ti_st_dbg(TI_ST_DBG_KIM, "storing dev name >%s<", buf);
> strncpy(kim_data->dev_name, buf, count);
> - pr_debug("stored dev name >%s<", kim_data->dev_name);
> + ti_st_dbg(TI_ST_DBG_KIM, "stored dev name >%s<", kim_data->dev_name);
> return count;
> }
>
> @@ -588,9 +590,9 @@ static ssize_t store_baud_rate(struct device *dev,
> struct device_attribute *attr, const char *buf, size_t count)
> {
> struct kim_data_s *kim_data = dev_get_drvdata(dev);
> - pr_debug("storing baud rate >%s<", buf);
> + ti_st_dbg(TI_ST_DBG_KIM, "storing baud rate >%s<", buf);
> sscanf(buf, "%ld", &kim_data->baud_rate);
> - pr_debug("stored baud rate >%ld<", kim_data->baud_rate);
> + ti_st_dbg(TI_ST_DBG_KIM, "stored baud rate >%ld<", kim_data->baud_rate);
> return count;
> }
> #endif /* if DEBUG */
> @@ -718,14 +720,14 @@ static int kim_probe(struct platform_device *pdev)
>
> kim_gdata = kzalloc(sizeof(struct kim_data_s), GFP_ATOMIC);
> if (!kim_gdata) {
> - pr_err("no mem to allocate");
> + ti_st_err("no mem to allocate");
> return -ENOMEM;
> }
> dev_set_drvdata(&pdev->dev, kim_gdata);
>
> status = st_core_init(&kim_gdata->core_data);
> if (status != 0) {
> - pr_err(" ST core init failed");
> + ti_st_err(" ST core init failed");
> return -EIO;
> }
> /* refer to itself */
> @@ -735,14 +737,14 @@ static int kim_probe(struct platform_device *pdev)
> kim_gdata->nshutdown = pdata->nshutdown_gpio;
> status = gpio_request(kim_gdata->nshutdown, "kim");
> if (unlikely(status)) {
> - pr_err(" gpio %ld request failed ", kim_gdata->nshutdown);
> + ti_st_err(" gpio %ld request failed ", kim_gdata->nshutdown);
> return status;
> }
>
> /* Configure nShutdown GPIO as output=0 */
> status = gpio_direction_output(kim_gdata->nshutdown, 0);
> if (unlikely(status)) {
> - pr_err(" unable to configure gpio %ld", kim_gdata->nshutdown);
> + ti_st_err("unable to configure gpio %ld", kim_gdata->nshutdown);
> return status;
> }
> /* get reference of pdev for request_firmware
> @@ -753,7 +755,7 @@ static int kim_probe(struct platform_device *pdev)
>
> status = sysfs_create_group(&pdev->dev.kobj, &uim_attr_grp);
> if (status) {
> - pr_err("failed to create sysfs entries");
> + ti_st_err("failed to create sysfs entries");
> return status;
> }
>
> @@ -761,20 +763,20 @@ static int kim_probe(struct platform_device *pdev)
> strncpy(kim_gdata->dev_name, pdata->dev_name, UART_DEV_NAME_LEN);
> kim_gdata->flow_cntrl = pdata->flow_cntrl;
> kim_gdata->baud_rate = pdata->baud_rate;
> - pr_info("sysfs entries created\n");
> + ti_st_dbg(TI_ST_DBG_KIM, "sysfs entries created\n");
>
> kim_debugfs_dir = debugfs_create_dir("ti-st", NULL);
> if (IS_ERR(kim_debugfs_dir)) {
> - pr_err(" debugfs entries creation failed ");
> + ti_st_err(" debugfs entries creation failed ");
> kim_debugfs_dir = NULL;
> return -EIO;
> }
>
> debugfs_create_file("version", S_IRUGO, kim_debugfs_dir,
> - kim_gdata, &version_debugfs_fops);
> + kim_gdata, &version_debugfs_fops);
> debugfs_create_file("protocols", S_IRUGO, kim_debugfs_dir,
> - kim_gdata, &list_debugfs_fops);
> - pr_info(" debugfs entries created ");
> + kim_gdata, &list_debugfs_fops);
> + ti_st_dbg(TI_ST_DBG_KIM, " debugfs entries created ");
> return 0;
> }
>
> @@ -790,11 +792,11 @@ static int kim_remove(struct platform_device *pdev)
> * nShutdown gpio from the system
> */
> gpio_free(pdata->nshutdown_gpio);
> - pr_info("nshutdown GPIO Freed");
> + ti_st_dbg(TI_ST_DBG_KIM, "nshutdown GPIO Freed");
>
> debugfs_remove_recursive(kim_debugfs_dir);
> sysfs_remove_group(&pdev->dev.kobj, &uim_attr_grp);
> - pr_info("sysfs entries removed");
> + ti_st_dbg(TI_ST_DBG_KIM, "sysfs entries removed");
>
> kim_gdata->kim_pdev = NULL;
> st_core_exit(kim_gdata->core_data);
> diff --git a/drivers/misc/ti-st/st_ll.c b/drivers/misc/ti-st/st_ll.c
> index 1ff460a..ccdad8b 100644
> --- a/drivers/misc/ti-st/st_ll.c
> +++ b/drivers/misc/ti-st/st_ll.c
> @@ -24,6 +24,7 @@
> #include <linux/module.h>
> #include <linux/platform_device.h>
> #include <linux/ti_wilink_st.h>
> +#include "debug.h"
>
> /**********************************************************************/
> /* internal functions */
> @@ -31,7 +32,7 @@ static void send_ll_cmd(struct st_data_s *st_data,
> unsigned char cmd)
> {
>
> - pr_debug("%s: writing %x", __func__, cmd);
> + ti_st_dbg(TI_ST_DBG_HCI_LL, "%s: writing %x", __func__, cmd);
> st_int_write(st_data, &cmd, 1);
> return;
> }
> @@ -41,11 +42,11 @@ static void ll_device_want_to_sleep(struct st_data_s *st_data)
> struct kim_data_s *kim_data;
> struct ti_st_plat_data *pdata;
>
> - pr_debug("%s", __func__);
> + ti_st_dbg(TI_ST_DBG_HCI_LL, "%s", __func__);
> /* sanity check */
> if (st_data->ll_state != ST_LL_AWAKE)
> - pr_err("ERR hcill: ST_LL_GO_TO_SLEEP_IND"
> - "in state %ld", st_data->ll_state);
> + ti_st_err("ERR hcill: ST_LL_GO_TO_SLEEP_IND"
> + "in state %ld", st_data->ll_state);
>
> send_ll_cmd(st_data, LL_SLEEP_ACK);
> /* update state */
> @@ -70,15 +71,15 @@ static void ll_device_want_to_wakeup(struct st_data_s *st_data)
> break;
> case ST_LL_ASLEEP_TO_AWAKE:
> /* duplicate wake_ind */
> - pr_err("duplicate wake_ind while waiting for Wake ack");
> + ti_st_err("duplicate wake_ind while waiting for Wake ack");
> break;
> case ST_LL_AWAKE:
> /* duplicate wake_ind */
> - pr_err("duplicate wake_ind already AWAKE");
> + ti_st_err("duplicate wake_ind already AWAKE");
> break;
> case ST_LL_AWAKE_TO_ASLEEP:
> /* duplicate wake_ind */
> - pr_err("duplicate wake_ind");
> + ti_st_err("duplicate wake_ind");
> break;
> }
> /* update state */
> @@ -116,14 +117,13 @@ void st_ll_wakeup(struct st_data_s *ll)
> ll->ll_state = ST_LL_ASLEEP_TO_AWAKE;
> } else {
> /* don't send the duplicate wake_indication */
> - pr_err(" Chip already AWAKE ");
> + ti_st_err(" Chip already AWAKE ");
> }
> }
>
> /* called when ST Core wants the state */
> unsigned long st_ll_getstate(struct st_data_s *ll)
> {
> - pr_debug(" returning state %ld", ll->ll_state);
> return ll->ll_state;
> }
>
> @@ -133,22 +133,22 @@ unsigned long st_ll_sleep_state(struct st_data_s *st_data,
> {
> switch (cmd) {
> case LL_SLEEP_IND: /* sleep ind */
> - pr_debug("sleep indication recvd");
> + ti_st_dbg(TI_ST_DBG_HCI_LL, "sleep indication recvd");
> ll_device_want_to_sleep(st_data);
> break;
> case LL_SLEEP_ACK: /* sleep ack */
> - pr_err("sleep ack rcvd: host shouldn't");
> + ti_st_err("sleep ack rcvd: host shouldn't");
> break;
> case LL_WAKE_UP_IND: /* wake ind */
> - pr_debug("wake indication recvd");
> + ti_st_dbg(TI_ST_DBG_HCI_LL, "wake indication recvd");
> ll_device_want_to_wakeup(st_data);
> break;
> case LL_WAKE_UP_ACK: /* wake ack */
> - pr_debug("wake ack rcvd");
> + ti_st_dbg(TI_ST_DBG_HCI_LL, "wake ack rcvd");
> st_data->ll_state = ST_LL_AWAKE;
> break;
> default:
> - pr_err(" unknown input/state ");
> + ti_st_err(" unknown input/state ");
> return -EINVAL;
> }
> return 0;
> --
> 1.7.4.1
>
I agree that this driver needs improvements but I don't see any value in
adding new macros for existing debugging infrastructure (e.g ti_st_err
vs pr_err).
I propose to look for the following issues:
* cleanup pr_debug's, the driver is just too verbose.
* replace pr_err kind of functions with dev_err where appropriate
* fix yoda conditions:
if (4 != st_int_write(kim_gdata->core_data, read_ver_cmd, 4))
thanks,
Daniel.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists