| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1332137864-12943-1-git-send-email-amit.kachhap@linaro.org>
Date: Mon, 19 Mar 2012 11:47:38 +0530
From: Amit Daniel Kachhap <amit.kachhap@...aro.org>
To: linux-pm@...ts.linux-foundation.org,
linux-samsung-soc@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, mjg59@...f.ucam.org,
linux-acpi@...r.kernel.org, lenb@...nel.org,
linaro-dev@...ts.linaro.org, lm-sensors@...sensors.org,
amit.kachhap@...aro.org, patches@...aro.org,
eduardo.valentin@...com, durgadoss.r@...el.com
Subject: [PATCH V2 0/6] thermal: exynos: Add kernel thermal support for exynos platform
Changes since V1:
*Moved the sensor driver to driver/thermal folder from driver/hwmon folder
as suggested by Mark Brown and Guenter Roeck
*Added notifier support to notify the registered drivers of any cpu cooling
action. The driver can modify the default cooling behaviour(eg set different
max clip frequency).
*The percentage based frequency replaced with absolute clipped frequency.
*Some more conditional checks when setting max frequency.
*Renamed the new trip type THERMAL_TRIP_STATE_ACTIVE to
THERMAL_TRIP_STATE_INSTANCE
*Many review comments from R, Durgadoss <durgadoss.r@...el.com> and
eduardo.valentin@...com implemented.
*Removed cooling stats through debugfs patch
*The V1 based can be found here,
https://lkml.org/lkml/2012/2/22/123
http://lkml.org/lkml/2012/3/3/32
Changes since RFC:
*Changed the cpu cooling registration/unregistration API's to instance based
*Changed the STATE_ACTIVE trip type to pass correct instance id
*Adding support to restore back the policy->max_freq after doing frequency
clipping.
*Moved the trip cooling stats from sysfs node to debugfs node as suggested
by Greg KH greg@...ah.com
*Incorporated several review comments from eduardo.valentin@...com
*Moved the Temperature sensor driver from driver/hwmon/ to driver/mfd
as discussed with Guenter Roeck <guenter.roeck@...csson.com> and
Donggeun Kim <dg77.kim@...sung.com> (https://lkml.org/lkml/2012/1/5/7)
*Some changes according to the changes in common cpu cooling APIs
*The RFC based patches can be found here,
https://lkml.org/lkml/2011/12/13/186
https://lkml.org/lkml/2011/12/21/169
Brief Description:
1) The generic cooling devices code is placed inside driver/thermal/* as
placing inside acpi folder will need un-necessary enabling of acpi code. This
codes is architecture independent.
2) This patchset adds a new trip type THERMAL_TRIP_STATE_INSTANCE which passes
cooling device instance number and may be helpful for cpufreq cooling devices
to take the correct cooling action. This trip type avoids the temperature
comparision check again inside the cooling handler.
3) This patchset adds generic cpu cooling low level implementation through
frequency clipping and cpu hotplug. In future, other cpu related cooling
devices may be added here. An ACPI version of this already exists
(drivers/acpi/processor_thermal.c). But this will be useful for platforms
like ARM using the generic thermal interface along with the generic cpu
cooling devices. The cooling device registration API's return cooling device
pointers which can be easily binded with the thermal zone trip points.
The important APIs exposed are,
a)struct thermal_cooling_device *cpufreq_cooling_register(
struct freq_clip_table *tab_ptr, unsigned int tab_size,
const struct cpumask *mask_val)
b)void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
4) Samsung exynos platform thermal implementation is done using the generic
cpu cooling APIs and the new trip type. The temperature sensor driver present
in the hwmon folder(registered as hwmon driver) is moved to thermal folder
and registered as a thermal driver.
All this patchset is based on Kernel version 3.3-rc7
A simple data/control flow diagrams is shown below,
Core Linux thermal <-----> Exynos thermal interface <----- Temperature Sensor
| |
\|/ |
Cpufreq cooling device <---------------
Amit Daniel Kachhap (6):
thermal: Add a new trip type to use cooling device instance number
thermal: Add generic cpufreq cooling implementation
thermal: Add generic cpuhotplug cooling implementation
hwmon: exynos4: Move thermal sensor driver to driver/thermal
directory
thermal: exynos4: Register the tmu sensor with the kernel thermal
layer
ARM: exynos4: Add thermal sensor driver platform device support
Documentation/hwmon/exynos4_tmu | 81 ---
Documentation/thermal/cpu-cooling-api.txt | 76 +++
Documentation/thermal/exynos4_tmu | 52 ++
Documentation/thermal/sysfs-api.txt | 4 +-
arch/arm/mach-exynos/Kconfig | 11 +
arch/arm/mach-exynos/Makefile | 1 +
arch/arm/mach-exynos/clock.c | 4 +
arch/arm/mach-exynos/dev-tmu.c | 39 ++
arch/arm/mach-exynos/include/mach/irqs.h | 2 +
arch/arm/mach-exynos/include/mach/map.h | 1 +
arch/arm/mach-exynos/mach-origen.c | 1 +
arch/arm/plat-samsung/include/plat/devs.h | 1 +
drivers/hwmon/Kconfig | 10 -
drivers/hwmon/Makefile | 1 -
drivers/hwmon/exynos4_tmu.c | 514 -------------------
drivers/thermal/Kconfig | 21 +
drivers/thermal/Makefile | 2 +
drivers/thermal/cpu_cooling.c | 529 +++++++++++++++++++
drivers/thermal/exynos4_thermal.c | 790 +++++++++++++++++++++++++++++
drivers/thermal/thermal_sys.c | 45 ++-
include/linux/cpu_cooling.h | 78 +++
include/linux/platform_data/exynos4_tmu.h | 7 +
include/linux/thermal.h | 1 +
23 files changed, 1660 insertions(+), 611 deletions(-)
delete mode 100644 Documentation/hwmon/exynos4_tmu
create mode 100644 Documentation/thermal/cpu-cooling-api.txt
create mode 100644 Documentation/thermal/exynos4_tmu
create mode 100644 arch/arm/mach-exynos/dev-tmu.c
delete mode 100644 drivers/hwmon/exynos4_tmu.c
create mode 100644 drivers/thermal/cpu_cooling.c
create mode 100644 drivers/thermal/exynos4_thermal.c
create mode 100644 include/linux/cpu_cooling.h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists