[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <201203191534.q2JFYmKl012749@gatekeeper.vosshq.de>
Date: Tue, 8 Nov 2011 12:11:03 +0100
From: Nikolaus Voss <n.voss@...nmann.de>
To: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-i2c@...r.kernel.org
Cc: nicolas.ferre@...el.com, ben-linux@...ff.org, balbi@...com,
<h.feurstein@...il.com>, <rmallon@...il.com>
Subject: [PATCH v9 4/4] G45 TWI: remove open drain setting for twi function
gpios
The G45 datasheets explicitly states that setting the open drain property
on peripheral function gpios is not allowed. (How about other A91 chips?)
Signed-off-by: Nikolaus Voss <n.voss@...nmann.de>
---
arch/arm/mach-at91/at91sam9g45_devices.c | 6 ------
1 files changed, 0 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 96e2adc..050e6e2 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -685,18 +685,12 @@ void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, in
/* pins used for TWI interface */
if (i2c_id == 0) {
at91_set_A_periph(AT91_PIN_PA20, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PA20, 1);
-
at91_set_A_periph(AT91_PIN_PA21, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PA21, 1);
platform_device_register(&at91sam9g45_twi0_device);
} else {
at91_set_A_periph(AT91_PIN_PB10, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PB10, 1);
-
at91_set_A_periph(AT91_PIN_PB11, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PB11, 1);
platform_device_register(&at91sam9g45_twi1_device);
}
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists