| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20120319033616.GA32695@localhost.amd.com>
Date: Mon, 19 Mar 2012 11:36:17 +0800
From: Aaron Lu <aaron.lu@....com>
To: Lin Ming <ming.m.lin@...el.com>
CC: Zhang Rui <rui.zhang@...el.com>, Jeff Garzik <jgarzik@...ox.com>,
Alan Stern <stern@...land.harvard.edu>,
"Rafael J. Wysocki" <rjw@...k.pl>, Tejun Heo <tj@...nel.org>,
<linux-kernel@...r.kernel.org>, <linux-ide@...r.kernel.org>,
<linux-scsi@...r.kernel.org>, <linux-pm@...r.kernel.org>,
linux-acpi <linux-acpi@...r.kernel.org>
Subject: Re: [RFC PATCH v2 5/8] libata-acpi: add ata port runtime D3Cold
support
Hi,
On Thu, Mar 01, 2012 at 05:02:54PM +0800, Lin Ming wrote:
> ATA port may support runtime D3Cold state, for example, Zero-power ODD case.
> This patch adds wakeup notifier and enable/disable run_wake during
> supend/resume.
I've been thinking this for some time and realized that it would be
impossible for AMD's platform to work with this patch, the reason:
There is no _PRW in AMD's acpi implementation. And no _PRW would mean
the device is not wake up capable in current Linux ACPI implementation.
I've checked the ACPI spec and it said: 'the _PRW is only required for
devices that have the ability to wake the system from a system sleeping
state.'
So I'm not sure if _PRW fits here, since the most common use case for
zpodd would be: odd put to D3 cold and system is at S0, and odd is back
to D0 when necessary without affecting the system sleep state.
I suggest we install the acpi pm notifier on the handle based on the
following two criteria:
1 This ata device is DA capable;
2 Its acpi device indicates it is able to wake up itself in S0(_S0W
evaluates 4).
Does this make sense and will this work for your platform?
Another problem is how to place this ODD device into D3 cold state,
since our platform uses _PS3 control method to power off it. Do you have
any suggestions?
Thanks,
Aaron
>
> Signed-off-by: Lin Ming <ming.m.lin@...el.com>
> ---
> drivers/ata/libata-acpi.c | 82 +++++++++++++++++++++++++++++++++++++++++---
> drivers/ata/libata-scsi.c | 6 ++--
> drivers/ata/libata.h | 8 ++--
> 3 files changed, 83 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
> index 104c1d0..c2a4db6 100644
> --- a/drivers/ata/libata-acpi.c
> +++ b/drivers/ata/libata-acpi.c
> @@ -16,6 +16,7 @@
> #include <linux/libata.h>
> #include <linux/pci.h>
> #include <linux/slab.h>
> +#include <linux/pm_runtime.h>
> #include <scsi/scsi_device.h>
> #include "libata.h"
>
> @@ -852,10 +853,23 @@ void ata_acpi_set_state(struct ata_port *ap, pm_message_t state)
>
> ata_for_each_dev(dev, &ap->link, ENABLED) {
> handle = ata_dev_acpi_handle(dev);
> - if (handle)
> - acpi_bus_set_power(handle,
> - state.event == PM_EVENT_ON ?
> - ACPI_STATE_D0 : ACPI_STATE_D3);
> + if (!handle)
> + continue;
> +
> + if (state.event != PM_EVENT_ON) {
> + acpi_state = acpi_pm_device_sleep_state(
> + &dev->sdev->sdev_gendev, NULL);
> + if (acpi_state > 0)
> + acpi_bus_set_power(handle, acpi_state);
> + if (ap->tdev.power.request == RPM_REQ_SUSPEND)
> + acpi_pm_device_run_wake(
> + &dev->sdev->sdev_gendev, true);
> + } else {
> + if (ap->tdev.power.request == RPM_REQ_RESUME)
> + acpi_pm_device_run_wake(
> + &dev->sdev->sdev_gendev, false);
> + acpi_bus_set_power(handle, ACPI_STATE_D0);
> + }
> }
>
> handle = ata_ap_acpi_handle(ap);
> @@ -955,7 +969,7 @@ void ata_acpi_on_disable(struct ata_device *dev)
> ata_acpi_clear_gtf(dev);
> }
>
> -void ata_acpi_bind_dock(struct ata_device *dev)
> +static void ata_acpi_bind_dock(struct ata_device *dev)
> {
> struct device **docks;
>
> @@ -965,7 +979,7 @@ void ata_acpi_bind_dock(struct ata_device *dev)
> kfree(docks);
> }
>
> -void ata_acpi_unbind_dock(struct ata_device *dev)
> +static void ata_acpi_unbind_dock(struct ata_device *dev)
> {
> struct device **docks;
>
> @@ -975,6 +989,62 @@ void ata_acpi_unbind_dock(struct ata_device *dev)
> kfree(docks);
> }
>
> +static void ata_acpi_wake_dev(acpi_handle handle, u32 event, void *context)
> +{
> + struct ata_device *ata_dev = context;
> +
> + if (event == ACPI_NOTIFY_DEVICE_WAKE && ata_dev)
> + scsi_autopm_get_device(ata_dev->sdev);
> +}
> +
> +static void ata_acpi_add_pm_notifier(struct ata_device *dev)
> +{
> + struct acpi_device *acpi_dev;
> + acpi_handle handle;
> + acpi_status status;
> +
> + handle = ata_dev_acpi_handle(dev);
> + if (!handle)
> + return;
> +
> + status = acpi_bus_get_device(handle, &acpi_dev);
> + if (ACPI_SUCCESS(status) && acpi_dev->wakeup.flags.run_wake) {
> + acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
> + ata_acpi_wake_dev, dev);
> + device_set_run_wake(&dev->sdev->sdev_gendev, true);
> + }
> +}
> +
> +static void ata_acpi_remove_pm_notifier(struct ata_device *dev)
> +{
> + struct acpi_device *acpi_dev;
> + acpi_handle handle;
> + acpi_status status;
> +
> + handle = ata_dev_acpi_handle(dev);
> + if (!handle)
> + return;
> +
> + status = acpi_bus_get_device(handle, &acpi_dev);
> + if (ACPI_SUCCESS(status) && acpi_dev->wakeup.flags.run_wake) {
> + device_set_run_wake(&dev->sdev->sdev_gendev, false);
> + acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
> + ata_acpi_wake_dev);
> + }
> +}
> +
> +void ata_acpi_bind(struct ata_device *dev)
> +{
> + ata_acpi_bind_dock(dev);
> + ata_acpi_add_pm_notifier(dev);
> +}
> +
> +void ata_acpi_unbind(struct ata_device *dev)
> +{
> + ata_acpi_unbind_dock(dev);
> + ata_acpi_remove_pm_notifier(dev);
> +}
> +
> static int is_pci_ata(struct device *dev)
> {
> struct pci_dev *pdev;
> diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
> index f08c447..231c3ec 100644
> --- a/drivers/ata/libata-scsi.c
> +++ b/drivers/ata/libata-scsi.c
> @@ -3444,7 +3444,7 @@ void ata_scsi_scan_host(struct ata_port *ap, int sync)
> if (!IS_ERR(sdev)) {
> dev->sdev = sdev;
> scsi_device_put(sdev);
> - ata_acpi_bind_dock(dev);
> + ata_acpi_bind(dev);
> } else {
> dev->sdev = NULL;
> }
> @@ -3541,12 +3541,12 @@ static void ata_scsi_remove_dev(struct ata_device *dev)
> mutex_lock(&ap->scsi_host->scan_mutex);
> spin_lock_irqsave(ap->lock, flags);
>
> + ata_acpi_unbind(dev);
> +
> /* clearing dev->sdev is protected by host lock */
> sdev = dev->sdev;
> dev->sdev = NULL;
>
> - ata_acpi_unbind_dock(dev);
> -
> if (sdev) {
> /* If user initiated unplug races with us, sdev can go
> * away underneath us after the host lock and
> diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
> index e61ba10..2ec7c38 100644
> --- a/drivers/ata/libata.h
> +++ b/drivers/ata/libata.h
> @@ -117,8 +117,8 @@ extern void ata_acpi_on_disable(struct ata_device *dev);
> extern void ata_acpi_set_state(struct ata_port *ap, pm_message_t state);
> extern int ata_acpi_register(void);
> extern void ata_acpi_unregister(void);
> -extern void ata_acpi_bind_dock(struct ata_device *dev);
> -extern void ata_acpi_unbind_dock(struct ata_device *dev);
> +extern void ata_acpi_bind(struct ata_device *dev);
> +extern void ata_acpi_unbind(struct ata_device *dev);
> #else
> static inline void ata_acpi_dissociate(struct ata_host *host) { }
> static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; }
> @@ -129,8 +129,8 @@ static inline void ata_acpi_set_state(struct ata_port *ap,
> pm_message_t state) { }
> static inline int ata_acpi_register(void) { return 0; }
> static void ata_acpi_unregister(void) { }
> -static void ata_acpi_bind_dock(struct ata_device *dev) { }
> -static void ata_acpi_unbind_dock(struct ata_device *dev) { }
> +static void ata_acpi_bind(struct ata_device *dev) { }
> +static void ata_acpi_unbind(struct ata_device *dev) { }
> #endif
>
> /* libata-scsi.c */
> --
> 1.7.2.5
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists