| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1332173578-27422-3-git-send-email-j-pihet@ti.com>
Date: Mon, 19 Mar 2012 17:12:51 +0100
From: jean.pihet@...oldbits.com
To: linux-omap@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Kevin Hilman <khilman@...com>,
"Rafael J. Wysocki" <rjw@...k.pl>,
LKML <linux-kernel@...r.kernel.org>
Cc: Jean Pihet <j-pihet@...com>
Subject: [PATCH 2/9] ARM: OMAP2+: SmartReflex: move the driver specific macros in include/linux/power
From: Jean Pihet <j-pihet@...com>
Move the driver specific macros from the smartreflex header file
(arch/arm/mach-omap2/smartreflex.h) in a new header file
include/linux/power/smartreflex.h.
This change makes the SmartReflex implementation ready for the move
to drivers/.
Signed-off-by: Jean Pihet <j-pihet@...com>
---
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 4 +-
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 3 +-
arch/arm/mach-omap2/smartreflex.c | 2 +-
arch/arm/mach-omap2/smartreflex.h | 42 -----------------
arch/arm/mach-omap2/sr_device.c | 2 +-
include/linux/power/smartreflex.h | 67 ++++++++++++++++++++++++++++
6 files changed, 72 insertions(+), 48 deletions(-)
create mode 100644 include/linux/power/smartreflex.h
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 0cc6a40..d7d4c70 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -13,6 +13,8 @@
*
* XXX these should be marked initdata for multi-OMAP kernels
*/
+#include <linux/power/smartreflex.h>
+
#include <plat/omap_hwmod.h>
#include <mach/irqs.h>
#include <plat/cpu.h>
@@ -28,8 +30,6 @@
#include <plat/dmtimer.h>
#include "omap_hwmod_common_data.h"
-
-#include "smartreflex.h"
#include "prm-regbits-34xx.h"
#include "cm-regbits-34xx.h"
#include "wd_timer.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 48e5834..31e7b87 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -19,6 +19,7 @@
*/
#include <linux/io.h>
+#include <linux/power/smartreflex.h>
#include <plat/omap_hwmod.h>
#include <plat/cpu.h>
@@ -32,8 +33,6 @@
#include <plat/common.h>
#include "omap_hwmod_common_data.h"
-
-#include "smartreflex.h"
#include "cm1_44xx.h"
#include "cm2_44xx.h"
#include "prm44xx.h"
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 008fbd7..33e2825 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -25,9 +25,9 @@
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
+#include <linux/power/smartreflex.h>
#include "common.h"
-
#include "pm.h"
#include "smartreflex.h"
diff --git a/arch/arm/mach-omap2/smartreflex.h b/arch/arm/mach-omap2/smartreflex.h
index c4e8530..8835422 100644
--- a/arch/arm/mach-omap2/smartreflex.h
+++ b/arch/arm/mach-omap2/smartreflex.h
@@ -152,14 +152,6 @@ struct omap_sr_pmic_data {
void (*sr_pmic_init) (void);
};
-/**
- * struct omap_smartreflex_dev_attr - Smartreflex Device attribute.
- *
- * @sensor_voltdm_name: Name of voltdomain of SR instance
- */
-struct omap_smartreflex_dev_attr {
- const char *sensor_voltdm_name;
-};
#ifdef CONFIG_OMAP_SMARTREFLEX
/*
@@ -194,40 +186,6 @@ struct omap_sr_class_data {
u8 class_type;
};
-/**
- * struct omap_sr_nvalue_table - Smartreflex n-target value info
- *
- * @efuse_offs: The offset of the efuse where n-target values are stored.
- * @nvalue: The n-target value.
- */
-struct omap_sr_nvalue_table {
- u32 efuse_offs;
- u32 nvalue;
-};
-
-/**
- * struct omap_sr_data - Smartreflex platform data.
- *
- * @ip_type: Smartreflex IP type.
- * @senp_mod: SENPENABLE value for the sr
- * @senn_mod: SENNENABLE value for sr
- * @nvalue_count: Number of distinct nvalues in the nvalue table
- * @enable_on_init: whether this sr module needs to enabled at
- * boot up or not.
- * @nvalue_table: table containing the efuse offsets and nvalues
- * corresponding to them.
- * @voltdm: Pointer to the voltage domain associated with the SR
- */
-struct omap_sr_data {
- int ip_type;
- u32 senp_mod;
- u32 senn_mod;
- int nvalue_count;
- bool enable_on_init;
- struct omap_sr_nvalue_table *nvalue_table;
- struct voltagedomain *voltdm;
-};
-
/* Smartreflex module enable/disable interface */
void omap_sr_enable(struct voltagedomain *voltdm);
void omap_sr_disable(struct voltagedomain *voltdm);
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index a503e1e..86e438e 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -17,6 +17,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/power/smartreflex.h>
#include <linux/err.h>
#include <linux/slab.h>
@@ -24,7 +25,6 @@
#include <plat/omap_device.h>
-#include "smartreflex.h"
#include "voltage.h"
#include "control.h"
#include "pm.h"
diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h
new file mode 100644
index 0000000..4a15640
--- /dev/null
+++ b/include/linux/power/smartreflex.h
@@ -0,0 +1,67 @@
+/*
+ * OMAP Smartreflex Defines and Routines
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Jean Pihet <j-pihet@...com>
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Kalle Jokiniemi
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Lesly A M <x0080970@...com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __POWER_SMARTREFLEX_H
+#define __POWER_SMARTREFLEX_H
+
+#include <linux/types.h>
+
+#include <plat/voltage.h>
+
+/**
+ * struct omap_sr_nvalue_table - Smartreflex n-target value info
+ *
+ * @efuse_offs: The offset of the efuse where n-target values are stored.
+ * @nvalue: The n-target value.
+ */
+struct omap_sr_nvalue_table {
+ u32 efuse_offs;
+ u32 nvalue;
+};
+
+/**
+ * struct omap_sr_data - Smartreflex platform data.
+ *
+ * @ip_type: Smartreflex IP type.
+ * @senp_mod: SENPENABLE value for the sr
+ * @senn_mod: SENNENABLE value for sr
+ * @nvalue_count: Number of distinct nvalues in the nvalue table
+ * @enable_on_init: whether this sr module needs to enabled at
+ * boot up or not.
+ * @nvalue_table: table containing the efuse offsets and nvalues
+ * corresponding to them.
+ * @voltdm: Pointer to the voltage domain associated with the SR
+ */
+struct omap_sr_data {
+ int ip_type;
+ u32 senp_mod;
+ u32 senn_mod;
+ int nvalue_count;
+ bool enable_on_init;
+ struct omap_sr_nvalue_table *nvalue_table;
+ struct voltagedomain *voltdm;
+};
+
+/**
+ * struct omap_smartreflex_dev_attr - Smartreflex Device attribute.
+ *
+ * @sensor_voltdm_name: Name of voltdomain of SR instance
+ */
+struct omap_smartreflex_dev_attr {
+ const char *sensor_voltdm_name;
+};
+
+#endif
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists