| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20120322071152.GC2213@S2101-09.ap.freescale.net>
Date: Thu, 22 Mar 2012 15:11:54 +0800
From: Shawn Guo <shawn.guo@...aro.org>
To: "Ying-Chun Liu (PaulLiu)" <paul.liu@...aro.org>
Cc: linux-arm-kernel@...ts.infradead.org, linaro-dev@...ts.linaro.org,
Samuel Ortiz <sameo@...ux.intel.com>, patches@...aro.org,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
linux-kernel@...r.kernel.org, Liam Girdwood <lrg@...com>,
Nancy Chen <Nancy.Chen@...escale.com>,
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>
Subject: Re: [PATCH v13] Regulator: Add Anatop regulator driver
On Thu, Mar 22, 2012 at 02:49:36PM +0800, Ying-Chun Liu (PaulLiu) wrote:
...
> Ouch. I'll prepare a separate patch to add back the documentation.
>
I just gave a quick testing on the driver with the dts change you
posted on imx6. There is some little problem we may need to address.
prom_parse: Bad cell count for /soc/aips-bus@...00000/anatop@...c8000/regulator-vddpu@140
vddpu: 725 <--> 1300 mV at 1100 mV
prom_parse: Bad cell count for /soc/aips-bus@...00000/anatop@...c8000/regulator-vddcore@140
cpu: 725 <--> 1300 mV at 1100 mV
prom_parse: Bad cell count for /soc/aips-bus@...00000/anatop@...c8000/regulator-vddsoc@140
vddsoc: 725 <--> 1300 mV at 1100 mV
prom_parse: Bad cell count for /soc/aips-bus@...00000/anatop@...c8000/regulator-2p5@130
vdd2p5: 2000 <--> 2775 mV at 2400 mV
prom_parse: Bad cell count for /soc/aips-bus@...00000/anatop@...c8000/regulator-1p1@110
vdd1p1: 800 <--> 1400 mV at 1100 mV
prom_parse: Bad cell count for /soc/aips-bus@...00000/anatop@...c8000/regulator-3p0@120
vdd3p0: 2800 <--> 3150 mV at 3000 mV
The DT core function __of_translate_address will give some annoying
error messages. We call of_platform_populate from anatop mfd driver
to populate regulator device, and during the call, DT core tries to
translate "reg" property to address resource, and will complain if
!(#size-cells > 0).
To fix that, we may want to rename "reg" property to something else,
e.g. "anatop-reg-offset". I tested the following changes removed the
error messages above.
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 56d3c16..65bad45 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -346,16 +346,14 @@
compatible = "fsl,imx6q-anatop";
reg = <0x020c8000 0x1000>;
interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
- #address-cells = <1>;
- #size-cells = <0>;
- regulator-vddpu@140 {
+ regulator-vddpu {
compatible = "fsl,anatop-regulator";
regulator-name = "vddpu";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
- reg = <0x140>;
+ anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <9>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <1>;
@@ -363,13 +361,13 @@
anatop-max-voltage = <1300000>;
};
- regulator-vddcore@140 {
+ regulator-vddcore {
compatible = "fsl,anatop-regulator";
regulator-name = "cpu";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
- reg = <0x140>;
+ anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <0>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <1>;
@@ -377,13 +375,13 @@
anatop-max-voltage = <1300000>;
};
- regulator-vddsoc@140 {
+ regulator-vddsoc {
compatible = "fsl,anatop-regulator";
regulator-name = "vddsoc";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
- reg = <0x140>;
+ anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <18>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <1>;
@@ -391,13 +389,13 @@
anatop-max-voltage = <1300000>;
};
- regulator-2p5@130 {
+ regulator-2p5 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2775000>;
regulator-always-on;
- reg = <0x130>;
+ anatop-reg-offset = <0x130>;
anatop-vol-bit-shift = <8>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <0>;
@@ -405,13 +403,13 @@
anatop-max-voltage = <2775000>;
};
- regulator-1p1@110 {
+ regulator-1p1 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
- reg = <0x110>;
+ anatop-reg-offset = <0x110>;
anatop-vol-bit-shift = <8>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <4>;
@@ -419,13 +417,13 @@
anatop-max-voltage = <1400000>;
};
- regulator-3p0@120 {
+ regulator-3p0 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3150000>;
regulator-always-on;
- reg = <0x120>;
+ anatop-reg-offset = <0x120>;
anatop-vol-bit-shift = <8>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <7>;
diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
index 17499a5..632c087 100644
--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -138,9 +138,9 @@ static int __devinit anatop_regulator_probe(struct platform_device *pdev)
rdesc->type = REGULATOR_VOLTAGE;
rdesc->owner = THIS_MODULE;
sreg->mfd = anatopmfd;
- ret = of_property_read_u32(np, "reg", &sreg->control_reg);
+ ret = of_property_read_u32(np, "anatop-reg-offset", &sreg->control_reg);
if (ret) {
- dev_err(dev, "no reg property set\n");
+ dev_err(dev, "no anatop-reg-offset property set\n");
goto anatop_probe_end;
}
ret = of_property_read_u32(np, "anatop-vol-bit-width",
--
Regards,
Shawn
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists