| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1332460334-11173-1-git-send-email-alexg@meprolight.com>
Date: Fri, 23 Mar 2012 01:52:14 +0200
From: Alex <alexgershgorin@...il.com>
To: Sascha Hauer <s.hauer@...gutronix.de>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Alex <alexg@...rolight.com>
Subject: [PATCH] regulator: i.MX35-PDK Add regulator support
This patch register MC13892 PMIC which connected
via I2C bus and allow set the voltage domains
and constraints for each regulator.
Signed-off-by: Alex Gershgorin <alexg@...rolight.com>
---
This patch is based on the following patches from Marc Reilly:
[PATCH v4 1/4] mfd: mc13xxx-core: Prepare for separate spi and i2c backends.
[PATCH v4 2/4] mfd: mc13xxx-core: use regmap for register access.
[PATCH v4 3/4] mfd: mc13xxx-core: Move spi specific code into separate module.
[PATCH v4 4/4] mfd: mc13xxx: Add i2c driver
---
arch/arm/mach-imx/mach-mx35_3ds.c | 212 ++++++++++++++++++++++++++++++++++++-
1 files changed, 211 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 0af6c9c..3096335 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -29,6 +29,8 @@
#include <linux/usb/otg.h>
#include <linux/mtd/physmap.h>
+#include <linux/mfd/mc13892.h>
+#include <linux/regulator/machine.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -43,6 +45,7 @@
#include "devices-imx35.h"
+#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0)
#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 1))
static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -55,7 +58,7 @@ static struct physmap_flash_data mx35pdk_flash_data = {
static struct resource mx35pdk_flash_resource = {
.start = MX35_CS0_BASE_ADDR,
- .end = MX35_CS0_BASE_ADDR + SZ_64M - 1,
+ .end = MX35_CS0_BASE_ADDR + SZ_64M - 1,
.flags = IORESOURCE_MEM,
};
@@ -120,8 +123,214 @@ static iomux_v3_cfg_t mx35pdk_pads[] = {
/* I2C1 */
MX35_PAD_I2C1_CLK__I2C1_SCL,
MX35_PAD_I2C1_DAT__I2C1_SDA,
+ /*PMIC IRQ*/
+ MX35_PAD_GPIO2_0__GPIO2_0,
};
+static struct regulator_init_data sw1_init = {
+ .constraints = {
+ .name = "SW1",
+ .min_uV = 600000,
+ .max_uV = 1375000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .valid_modes_mask = 0,
+ .always_on = 1,
+ .boot_on = 1,
+ }
+};
+
+static struct regulator_init_data sw2_init = {
+ .constraints = {
+ .name = "SW2",
+ .min_uV = 900000,
+ .max_uV = 1850000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .always_on = 1,
+ .boot_on = 1,
+ }
+};
+
+static struct regulator_init_data sw3_init = {
+ .constraints = {
+ .name = "SW3",
+ .min_uV = 1100000,
+ .max_uV = 1850000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .always_on = 1,
+ .boot_on = 1,
+ }
+};
+
+static struct regulator_init_data sw4_init = {
+ .constraints = {
+ .name = "SW4",
+ .min_uV = 1100000,
+ .max_uV = 1850000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .always_on = 1,
+ .boot_on = 1,
+ }
+};
+
+static struct regulator_init_data viohi_init = {
+ .constraints = {
+ .name = "VIOHI",
+ .boot_on = 1,
+ }
+};
+
+static struct regulator_init_data vusb_init = {
+ .constraints = {
+ .name = "VUSB",
+ .boot_on = 1,
+ }
+};
+
+static struct regulator_init_data vdig_init = {
+ .constraints = {
+ .name = "VDIG",
+ .min_uV = 1050000,
+ .max_uV = 1800000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .boot_on = 1,
+ }
+};
+
+static struct regulator_init_data vpll_init = {
+ .constraints = {
+ .name = "VPLL",
+ .min_uV = 1050000,
+ .max_uV = 1800000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .boot_on = 1,
+ }
+};
+
+static struct regulator_init_data vusb2_init = {
+ .constraints = {
+ .name = "VUSB2",
+ .min_uV = 2400000,
+ .max_uV = 2775000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .boot_on = 1,
+ }
+};
+
+static struct regulator_init_data vvideo_init = {
+ .constraints = {
+ .name = "VVIDEO",
+ .min_uV = 2500000,
+ .max_uV = 2775000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .boot_on = 1
+ }
+};
+
+static struct regulator_init_data vaudio_init = {
+ .constraints = {
+ .name = "VAUDIO",
+ .min_uV = 2300000,
+ .max_uV = 3000000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .boot_on = 1
+ }
+};
+
+static struct regulator_init_data vsd_init = {
+ .constraints = {
+ .name = "VSD",
+ .min_uV = 1800000,
+ .max_uV = 3150000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ }
+};
+
+static struct regulator_init_data vcam_init = {
+ .constraints = {
+ .name = "VCAM",
+ .min_uV = 2500000,
+ .max_uV = 3000000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_MODE,
+ .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
+ .boot_on = 1
+ },
+};
+
+static struct regulator_init_data vgen1_init = {
+ .constraints = {
+ .name = "VGEN1",
+ .min_uV = 1200000,
+ .max_uV = 3150000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ }
+};
+
+static struct regulator_init_data vgen2_init = {
+ .constraints = {
+ .name = "VGEN2",
+ .min_uV = 1200000,
+ .max_uV = 3150000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .boot_on = 1,
+ }
+};
+
+static struct regulator_init_data vgen3_init = {
+ .constraints = {
+ .name = "VGEN3",
+ .min_uV = 1800000,
+ .max_uV = 2900000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ }
+};
+
+static struct mc13xxx_regulator_init_data mx35_3ds_regulators[] = {
+ { .id = MC13892_SW1, .init_data = &sw1_init },
+ { .id = MC13892_SW2, .init_data = &sw2_init },
+ { .id = MC13892_SW3, .init_data = &sw3_init },
+ { .id = MC13892_SW4, .init_data = &sw4_init },
+ { .id = MC13892_VIOHI, .init_data = &viohi_init },
+ { .id = MC13892_VPLL, .init_data = &vpll_init },
+ { .id = MC13892_VDIG, .init_data = &vdig_init },
+ { .id = MC13892_VSD, .init_data = &vsd_init },
+ { .id = MC13892_VUSB2, .init_data = &vusb2_init },
+ { .id = MC13892_VVIDEO, .init_data = &vvideo_init },
+ { .id = MC13892_VAUDIO, .init_data = &vaudio_init },
+ { .id = MC13892_VCAM, .init_data = &vcam_init },
+ { .id = MC13892_VGEN1, .init_data = &vgen1_init },
+ { .id = MC13892_VGEN2, .init_data = &vgen2_init },
+ { .id = MC13892_VGEN3, .init_data = &vgen3_init },
+ { .id = MC13892_VUSB, .init_data = &vusb_init },
+};
+
+static struct mc13xxx_platform_data mx35_3ds_mc13892_data = {
+ .flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN,
+ .regulators = {
+ .num_regulators = ARRAY_SIZE(mx35_3ds_regulators),
+ .regulators = mx35_3ds_regulators,
+ },
+};
+
+static struct i2c_board_info mx35_3ds_i2c_mc13892 = {
+
+ I2C_BOARD_INFO("mc13892", 0x08),
+ .platform_data = &mx35_3ds_mc13892_data,
+ .irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT),
+};
+
+static void __init imx35_3ds_init_mc13892(void)
+{
+ int ret = gpio_request_one(GPIO_PMIC_INT, GPIOF_DIR_IN, "pmic irq");
+
+ if (ret) {
+ pr_err("failed to get pmic irq: %d\n", ret);
+ return;
+ }
+
+ i2c_register_board_info(0, &mx35_3ds_i2c_mc13892, 1);
+}
+
static int mx35_3ds_otg_init(struct platform_device *pdev)
{
return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
@@ -204,6 +413,7 @@ static void __init mx35_3ds_init(void)
pr_warn("Init of the debugboard failed, all "
"devices on the debugboard are unusable.\n");
imx35_add_imx_i2c0(&mx35_3ds_i2c0_data);
+ imx35_3ds_init_mc13892();
}
static void __init mx35pdk_timer_init(void)
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists