| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1332492784-10526-7-git-send-email-myungjoo.ham@samsung.com>
Date: Fri, 23 Mar 2012 17:53:03 +0900
From: MyungJoo Ham <myungjoo.ham@...sung.com>
To: Arnd Bergmann <arnd@...db.de>, LKML <linux-kernel@...r.kernel.org>
Cc: NeilBrown <neilb@...e.de>, Randy Dunlap <rdunlap@...otime.net>,
Mike Lockwood <lockwood@...roid.com>,
Arve Hjønnevag <arve@...roid.com>,
Kyungmin Park <kyungmin.park@...sung.com>,
gregkh@...uxfoundation.org,
Linus Walleij <linus.walleij@...aro.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Morten CHRISTIANSEN <morten.christiansen@...ricsson.com>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
John Stultz <john.stultz@...aro.org>,
Joerg Roedel <joerg.roedel@....com>, myungjoo.ham@...il.com,
cw00.choi@...sung.com
Subject: [PATCH v7 6/6] Documentation/extcon: porting guide for Android kernel
switch driver.
Signed-off-by: MyungJoo Ham <myungjoo.ham@...sung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@...sung.com>
---
Documentation/extcon/porting-android-switch-class | 124 +++++++++++++++++++++
1 files changed, 124 insertions(+), 0 deletions(-)
create mode 100644 Documentation/extcon/porting-android-switch-class
diff --git a/Documentation/extcon/porting-android-switch-class b/Documentation/extcon/porting-android-switch-class
new file mode 100644
index 0000000..eb0fa5f
--- /dev/null
+++ b/Documentation/extcon/porting-android-switch-class
@@ -0,0 +1,124 @@
+
+ Staging/Android Switch Class Porting Guide
+ (linux/drivers/staging/android/switch)
+ (c) Copyright 2012 Samsung Electronics
+
+AUTHORS
+MyungJoo Ham <myungjoo.ham@...sung.com>
+
+/*****************************************************************
+ * CHAPTER 1. *
+ * PORTING SWITCH CLASS DEVICE DRIVERS *
+ *****************************************************************/
+
+****** STEP 1. Basic Functionality
+ No extcon extended feature, but switch features only.
+
+- struct switch_dev (fed to switch_dev_register/unregister)
+ @name: no change
+ @dev: no change
+ @index: drop (not used in switch device driver side anyway)
+ @state: no change
+ If you have used @state with magic numbers, keep it
+ at this step.
+ @print_name: no change but type change (switch_dev->extcon_dev)
+ @print_state: no change but type change (switch_dev->extcon_dev)
+
+- switch_dev_register(sdev, dev)
+ => extcon_dev_register(edev, dev)
+ : no change but type change (sdev->edev)
+- switch_dev_unregister(sdev)
+ => extcon_dev_unregister(edev)
+ : no change but type change (sdev->edev)
+- switch_get_state(sdev)
+ => extcon_get_state(edev)
+ : no change but type change (sdev->edev) and (return: int->u32)
+- switch_set_state(sdev, state)
+ => extcon_set_state(edev, state)
+ : no change but type change (sdev->edev) and (state: int->u32)
+
+With this changes, the ex-switch extcon class device works as it once
+worked as switch class device. However, it will now have additional
+interfaces (both ABI and in-kernel API) and different ABI locations.
+However, if CONFIG_ANDROID is enabled without CONFIG_ANDROID_SWITCH,
+/sys/class/switch/* will be symbolically linked to /sys/class/extcon/
+so that they are still compatible with legacy userspace processes.
+
+****** STEP 2. Multistate (no more magic numbers in state value)
+ Extcon's extended features for switch device drivers with
+ complex features usually required magic numbers in state
+ value of switch_dev. With extcon, such magic numbers that
+ support multiple cables (
+
+ 1. Define cable names at edev->supported_cable.
+ 2. (Recommended) remove print_state callback.
+ 3. Use extcon_get_cable_state_(edev, index) or
+ extcon_get_cable_state(edev, cable_name) instead of
+ extcon_get_state(edev) if you intend to get a state of a specific
+ cable. Same for set_state. This way, you can remove the usage of
+ magic numbers in state value.
+ 4. Use extcon_update_state() if you are updating specific bits of
+ the state value.
+
+Example: a switch device driver w/ magic numbers for two cables.
+ "0x00": no cables connected.
+ "0x01": cable 1 connected
+ "0x02": cable 2 connected
+ "0x03": cable 1 and 2 connected
+ 1. edev->supported_cable = {"1", "2", NULL};
+ 2. edev->print_state = NULL;
+ 3. extcon_get_cable_state_(edev, 0) shows cable 1's state.
+ extcon_get_cable_state(edev, "1") shows cable 1's state.
+ extcon_set_cable_state_(edev, 1) sets cable 2's state.
+ extcon_set_cable_state(edev, "2") sets cable 2's state
+ 4. extcon_update_state(edev, 0x01, 0) sets the least bit's 0.
+
+****** STEP 3. Notify other device drivers
+
+ You can notify others of the cable attach/detach events with
+notifier chains.
+
+ At the side of other device drivers (the extcon device itself
+does not need to get notified of its own events), there are two
+methods to register notifier_block for cable events:
+(a) for a specific cable or (b) for every cable.
+
+ (a) extcon_register_interest(obj, extcon_name, cable_name, nb)
+ Example: want to get news of "MAX8997_MUIC"'s "USB" cable
+
+ obj = kzalloc(sizeof(struct extcon_specific_cable_nb),
+ GFP_KERNEL);
+ nb->notifier_call = the_callback_to_handle_usb;
+
+ extcon_register_intereset(obj, "MAX8997_MUIC", "USB", nb);
+
+ (b) extcon_register_notifier(edev, nb)
+ Call nb for any changes in edev.
+
+ Please note that in order to properly behave with method (a),
+the extcon device driver should support multistate feature (STEP 2).
+
+****** STEP 4. Inter-cable relation (mutually exclusive)
+
+ You can provide inter-cable mutually exclusiveness information
+for an extcon device. When cables A and B are declared to be mutually
+exclusive, the two cables cannot be in ATTACHED state simulteneously.
+
+
+/*****************************************************************
+ * CHAPTER 2. *
+ * PORTING USERSPACE w/ SWITCH CLASS DEVICE SUPPORT *
+ *****************************************************************/
+
+****** ABI Location
+
+ If "CONFIG_ANDROID" is enabled and "CONFIG_ANDROID_SWITCH" is
+disabled, /sys/class/switch/* are created as symbolic links to
+/sys/class/extcon/*. Because CONFIG_ANDROID_SWITCH creates
+/sys/class/switch directory, we disable symboling linking if
+CONFIG_ANDROID_SWITCH is enabled.
+
+ The two files of switch class, name and state, are provided with
+extcon, too. When the multistate support (STEP 2 of CHAPTER 1.) is
+not enabled or print_state callback is supplied, the output of
+state ABI is same with switch class.
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists