| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1332626568-17812-1-git-send-email-arnd@arndb.de>
Date: Sat, 24 Mar 2012 22:02:37 +0000
From: Arnd Bergmann <arnd@...db.de>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
arm@...nel.org, Arnd Bergmann <arnd@...db.de>
Subject: [GIT PULL 0/9] arm-soc updates, first batch
Hi Linus,
These are the first nine pull requests for arm-soc in the v3.4 merge
window. We have queued up a total of 683 non-merge changesets this
time, and today you get 576 of those. This is more than for v3.3,
where we had lots of ugly merge conflicts and ended up not sending
everything. Despite the larger number of changes, I have a better
feeling this time, mostly because of the new way we handle conflicts
between the Russell's ARM tree and the arm-soc tree and resolve
them much earlier in the cycle.
There are a few conflicts left for you to clean up, but I resolved
most of the ones between the branches I'm sending and some particularly
annoying ones with stuff you already pulled from other branches.
I've provided an extra branch "test-merge" in the same git tree
for you with all of these merged. If you compare that with your
resolutions, you can point out afterwards what I merged wrong. ;-)
The remaining pull requests are either for stuff that is based on
branches you have not pulled yet, or that has not spent enough time
in linux-next because it was sent in the last week before the merge
window, and I plan to send them early next week. Since you've said
that you're away till Tuesday, you might get them at the same time
though.
Arnd
=== Tags included in this series ===
1. fixes-non-critical ARM: Non-critical bug fixes
2. maintainers ARM: subarch maintainer updates
3. cleanup ARM: global cleanups
4. timer ARM: timer cleanup work
5. soc ARM: SoC specific updates
6. boards ARM: board specific updates
7. rpmsg remoteproc/rpmsg: new subsystem
8. drivers ARM: driver specific updates
9. dt ARM: device tree work
=== Dirstat ===
1.2% Documentation/devicetree/bindings/arm/
3.4% Documentation/
5.0% arch/arm/boot/dts/
5.7% arch/arm/mach-at91/include/mach/
11.8% arch/arm/mach-at91/
1.5% arch/arm/mach-davinci/
1.7% arch/arm/mach-ep93xx/
1.9% arch/arm/mach-exynos/include/mach/
9.9% arch/arm/mach-exynos/
2.9% arch/arm/mach-imx/
1.6% arch/arm/mach-mxs/
1.2% arch/arm/mach-omap1/
4.6% arch/arm/mach-omap2/
1.8% arch/arm/mach-s3c24xx/
1.5% arch/arm/mach-shmobile/
12.4% arch/arm/mach-tegra/
1.7% arch/arm/mach-vexpress/
10.7% arch/arm/
1.0% arch/
6.3% drivers/remoteproc/
2.8% drivers/rpmsg/
4.9% drivers/
2.8% include/linux/
=== Shortlog ===
Aaro Koskinen (1):
ARM: OMAP: add minimal support for Nokia RM-696
Afzal Mohammed (1):
ARM: OMAP2+: id: Add am33xx SoC type detection
Alex (1):
ARM: OMAP: Add omap_reserve functionality
Alex Gershgorin (1):
i.MX35-PDK: Add Camera support
Amit Daniel Kachhap (5):
ARM: EXYNOS: Add support AFTR mode on EXYNOS4210
ARM: S5P: add L2 early resume code
ARM: EXYNOS: save L2 settings during bootup
ARM: EXYNOS: remove useless code to save/restore L2
ARM: EXYNOS: Enable l2 configuration through device tree
Andrzej Pietrasiewicz (3):
ARM: EXYNOS: add support JPEG
ARM: EXYNOS: Register JPEG on universal_c210
ARM: EXYNOS: Register JPEG on nuri
Arnd Bergmann (108):
Merge branch 'v3.4-next/devel-samsung-rtc' of git://git.kernel.org/.../kgene/linux-samsung into next/drivers
Merge branch 'depends/driver-core' into next/soc2
Merge branch 'ux500/soc' into next/soc2
Merge branch 'lpc32xx/drivers' into next/drivers
Merge tag 'rpmsg-for-3.4' of git://git.kernel.org/.../ohad/remoteproc into next/rpmsg
Merge branch 'vexpress-dt-v3.3-rc4' of git://git.linaro.org/people/pawelmoll/linux into next/dt
Merge branch 'features/cs89x0' of git://git.pengutronix.de/git/imx/linux-2.6 into next/drivers
Merge branch 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 into next/fixes-non-critical
Merge branch 'imx-cleanup' of git://git.pengutronix.de/git/imx/linux-2.6 into next/cleanup
Merge branch 'imx-drivers' of git://git.pengutronix.de/git/imx/linux-2.6 into next/drivers
Merge branch 'v3.4/fixes' of git://gitorious.org/linux-davinci/linux-davinci into next/fixes-non-critical
ARM: davinci: add back dummy header files
Merge branch 'davinci/cleanups' into next/cleanup
Merge branch 'kirkwood/board' into next/boards
Merge branch 'lpc32xx/fixes-non-critical' of git://git.antcom.de/linux-2.6 into next/fixes-non-critical
Merge branch 'mxs/gpmi' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/drivers
Merge branch 'imx/driver' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/drivers
Merge branch 'imx/dt' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt
Merge branch 'imx/defconfig' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc
Merge branch 'rtc-sa1100' of git://github.com/hzhuang1/linux into next/drivers
Merge branch 'cleanup-3.4' of git://github.com/hzhuang1/linux into next/cleanup
Merge branch 'board-specific' of git://github.com/hzhuang1/linux into next/boards
Merge branch 'at91-3.4-base2+cleanup' of git://github.com/at91linux/linux-at91 into at91/staging/base2+cleanup
ARM: ux500: U8500 depends on MMU
ARM: ux500: add board autoselection
ARM: ux500: select L2X0 cache on ux500
ARM: ux500: select CPU_FREQ_TABLE where needed
Merge branch 'fixes-non-critical' of git://git.kernel.org/.../tmlind/linux-omap into next/fixes-non-critical
Merge branch 'soc' of git://git.kernel.org/.../tmlind/linux-omap into next/soc
Merge branch 'omap1' of git://git.kernel.org/.../tmlind/linux-omap into next/boards
Merge branch 'dt' of git://git.kernel.org/.../tmlind/linux-omap into next/dt
Merge branch 'cleanup' of git://git.kernel.org/.../tmlind/linux-omap into omap/cleanup
Merge branch 'cleanup' of git://git.kernel.org/.../tmlind/linux-omap into next/cleanup
Merge branch 'depends/omap/gpio/runtime-pm-cleanup' into next/cleanup
Merge branches 'depends/irqdomain' and 'at91/base2+cleanup' into next/dt
Merge branch 'at91-3.4-cleanup2+DT' of git://github.com/at91linux/linux-at91 into next/dt
Merge branch 'features/imx27-visstrim' of git://git.pengutronix.de/git/imx/linux-2.6 into next/boards
Merge branch 'features/imx27-dt' of git://git.pengutronix.de/git/imx/linux-2.6 into next/dt
Merge branch 'features/imx31-moboard' of git://git.pengutronix.de/git/imx/linux-2.6 into next/boards
Merge branch 'features/imx3' of git://git.pengutronix.de/git/imx/linux-2.6 into next/soc
ARM: tegra: select CPU_FREQ_TABLE
ARM: tegra: build localtimer support only when needed
ARM: tegra: export usb phy symbols
Merge tag 'tegra-cleanups' of git://git.kernel.org/.../olof/tegra into tegra/cleanups
Merge tag 'tegra-cleanups' of git://git.kernel.org/.../olof/tegra into tegra/cleanups
Merge tag 'tegra-dt' of git://git.kernel.org/.../olof/tegra into tegra/dt
Merge tag 'tegra-soc' of git://git.kernel.org/.../olof/tegra into tegra/soc
Merge tag 'tegra-soc-drivers' of git://git.kernel.org/.../olof/tegra into tegra/soc-drivers
Merge tag 'tegra-soc2' of git://git.kernel.org/.../olof/tegra into tegra/soc2
Merge tag 'tegra-boards' of git://git.kernel.org/.../olof/tegra into tegra/boards
Merge branch 'depends/irqdomain' into next/drivers
Merge branch 'ux500-fixes-20120301' of git://git.kernel.org/.../linusw/linux-stericsson into next/fixes-non-critical
Merge branch 'ux500/timers' into next/timer
Merge branch 'vexpress/timer' into next/timer
Merge branch 'local_timers-for-arm-soc' of git://git.kernel.org/.../maz/arm-platforms into next/timer
ARM: shmobile: remove additional __io() macro use
Merge branch 'local_timers-for-arm-soc' of git://git.kernel.org/.../maz/arm-platforms into next/timer
Merge tag 'imx25-iomux-ds' of git://git.pengutronix.de/git/imx/linux-2.6 into next/fixes-non-critical
Merge branches 'lpc32xx/mach-lpc32xx-eth' and 'lpc32xx/mach-lpc32xx-usb' of git://git.antcom.de/linux-2.6 into lpc32xx/drivers
Merge branch 'lpc32xx/drivers' into next/drivers
Merge branch 'ep93xx-for-arm-soc' of git://github.com/RyanMallon/linux-2.6 into next/cleanup
Merge branch 'fixes' of git://gitorious.org/linux-davinci/linux-davinci into next/fixes-non-critical
Merge branch 'board-specific' of git://github.com/hzhuang1/linux into next/boards
Merge branch 'fixes-non-critical' of git://github.com/hzhuang1/linux into next/maintainers
Merge tag 'imx35-cam-fb' of git://git.pengutronix.de/git/imx/linux-2.6 into next/boards
Merge branch 'renesas/fixes' into renesas/soc
Merge branch 'renesas/soc' into next/soc
Merge branch 'v3.4/features' of git://gitorious.org/linux-davinci/linux-davinci into next/drivers
Merge branch 'next/soc-exynos5250-gpio' of git://git.kernel.org/.../kgene/linux-samsung into next/drivers
Merge branch 'next/soc-exynos5250-arch' of git://git.kernel.org/.../kgene/linux-samsung into samsung/exynos5
Merge branch 'for-armsoc' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm into next/soc2
Merge branch 'samsung/exynos5' into next/soc2
Merge branch 'samsung/soc' into next/soc2
Merge branch 'at91-3.4-cleanup2-DT2' of git://github.com/at91linux/linux-at91 into next/dt
Merge branch 'at91-3.4-cleanup2-DT2+USB' of git://github.com/at91linux/linux-at91 into next/dt
Merge branch 'ux500/soc' into ux500/dt
Merge branch 'depends/driver-core' into ux500/dt
ARM: ux500: Initial Device Tree support for Snowball
ARM: ux500: combine the board init functions for DT boot
ARM: ux500: split dts file for snowball into generic part
Merge branch 'ux500/dt' into next/dt2
Merge branch 'spear/dt' into next/dt2
ARM: tegra: select USB_ULPI if USB is selected
clk: make CONFIG_COMMON_CLK invisible
Merge branch 'for-3.4/dt' of git://git.kernel.org/.../olof/tegra into next/dt2
Merge branch 'for-3.4/cleanup-and-fixes' of git://git.kernel.org/.../olof/tegra into tegra/cleanups
Merge branch 'tegra/cleanups' into next/cleanup2
Merge branch 'for-3.4/boards' of git://git.kernel.org/.../olof/tegra into next/boards
Merge branch 'fixes' into next/fixes-non-critical
Merge branch 'renesas/timer' into next/timer
Merge branch 'samsung/cleanup-exynos-clock' into next/soc
Merge branch 'imx/defconfig' into next/drivers
Merge branch 'next/fixes-non-critical' into next/drivers
Merge branch 'tegra/cleanups' into next/timer
Merge branch 'next/fixes-non-critical' into for-next
Merge branch 'next/maintainers' into for-next
Merge branch 'next/cleanup' into for-next
Merge branch 'next/timer' into for-next
Merge branch 'next/soc' into for-next
Merge branch 'next/boards' into for-next
Merge branch 'next/rpmsg' into for-next
Merge branch 'next/drivers' into for-next
Merge branch 'next/dt' into for-next
Merge branch 'next/cleanup2' into for-next
Merge branch 'next/drivers2' into for-next
Merge branch 'next/clk' into for-next
Merge branch 'next/soc2' into for-next
Merge branch 'next/dt2' into for-next
Axel Lin (1):
rpmsg: rename virtqueue_add_buf_gfp to virtqueue_add_buf
Benoit Cousson (14):
arm/dts: OMAP: Remove bootargs node from board files
ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems
ARM: OMAP2+: board-generic: Remove un-needed .atag_offset for DT_MACHINE
ARM: OMAP2+: omap_device: Replace dev_warn by dev_dbg in omap_device_build_from_dt
ARM: OMAP2+: pm: Do not init statically the SR and voltage layer with DT
ARM: OMAP1: kconfig: Enable IRQ_DOMAIN by default for OMAP1 platforms
arm/dts: OMAP3&4: Remove the '0x' prefix for serial nodes
arm/dts: OMAP4: Add i2c controller nodes
arm/dts: OMAP3: Add i2c controller nodes
arm/dts: OMAP4: Update DTS file with new GIC bindings
Merge branch 'irqdomain/next' of git://git.secretlab.ca/git/linux-2.6 into for_3.4/dt_irq_domain2
ARM: OMAP2/3: intc: Add DT support for TI interrupt controller
arm/dts: OMAP3: Add interrupt-controller bindings for INTC
ARM: OMAP2+: board-generic: Use of_irq_init API
Bernhard Walle (1):
ARM: OMAP2+: GPMC: Export gpmc_enable_hwecc and gpmc_calculate_ecc
Boojin Kim (2):
ARM: EXYNOS: Enable MDMA driver
ARM: EXYNOS: add support DMA for EXYNOS4X12 SoC
Changhwan Youn (1):
ARM: EXYNOS: fix cycle count for periodic mode of clock event timers
Dan Liang (2):
ARM: at91/at91sam9x5: overall definition
ARM: at91/at91sam9x5: SoC basic support
Daniel Lezcano (4):
ARM: at91: coding style fixes
ARM: at91: declare header name
ARM: at91: remove wait_for_interrupt definition
ARM: at91: implement the standby function for pm/cpuidle
Danny Kukawka (3):
ARM: ux500: included linux/gpio.h twice
ARM: OMAP: clock.c: included linux/debugfs.h twice
ARM: OMAP2+: included some headers twice
Dirk Behme (1):
ARM: imx6: Rename DEBUG_IMX6Q_UART to UART4
Dmitry Artamonow (3):
arm/tegra: fix harmony pinmux for PCIe
arm/tegra: add timeout to PCIe PLL lock detection loop
arm/tegra: pcie: fix return value of function
Doug Anderson (2):
ARM: tegra: Introduce define DEBUG_UART_SHIFT
ARM: tegra: uncompress.h: Store UART address in a variable
Eunki Kim (1):
ARM: EXYNOS: support EINT for EXYNOS4 and EXYNOS5
Fabio Estevam (16):
ARM: mx28: Let audio support be built by default
ARM: mx28: Remove duplicate OCOTP error message
ARM: mx28evk: Simplify GPIO requests
ARM: mxs: Use a proper timeout mechanism
ARM: mach-pcm038: Fix field name of regulator_consumer_supply struct
ARM: imx_v4_v5_defconfig: Fix the selection of 32 bit flash support for iMX21ADS board
ARM: imx_v6_v7_defconfig: Add support for framebuffer and camera on mx31
ARM: mx27_3ds: Add camera support
ARM: imx_v4_v5_defconfig: Update defconfig
ARM: plat-mxc: audmux-v1: Remove unneeded ifdef's
ARM: mx3: Let mx31 and mx35 share the same CCM header file
ARM: mach-imx: mx3: Fix section mismatch in imx3_init_l2x0()
ARM: mx3: Let mx31 and mx35 enter in LPM mode in WFI
ARM: mx3: Setup AIPS registers
ARM: mx5: Use common function for configuring AIPS
ARM: mx35: Setup the AIPS registers
Felipe Balbi (4):
ARM: OMAP3+: SmartReflex: add missing platform_set_drvdata()
ARM: OMAP3+: SmartReflex: move late_initcall() closer to its argument
ARM: OMAP3+: SmartReflex: misc cleanups
ARM: OMAP3+: SmartReflex: micro-optimization for sanity check
Felipe Contreras (1):
ARM: OMAP: mailbox: trivial whitespace fix
Grazvydas Ignotas (2):
ARM: OMAP: pandora: add support for backlight and poweroff
ARM: omap: pandora: fix usbhs platform data
H Hartley Sweeten (1):
ep93xx: Convert the watchdog driver into a platform device.
Haojian Zhuang (16):
rtc: sa1100: remove periodic code
rtc: sa1100: remove verification code of alarm
rtc: sa1100: declare irq in resource
ARM: pxa: add rtc dummy clock
rtc: sa1100: enable clk support
ARM: mmp: append irq name of gpio device
ARM: pxa: add dummy clock for pxa25x and pxa27x
ARM: mmp: enable rtc in pxa910
rtc: sa1100: add OF support
serial: pxa: add OF support
i2c: pxa: add OF support
ARM: mmp: enable rtc clk in pxa168
ARM: mmp: append OF support on pxa168
ARM: dts: append DTS file of pxa168
Document: devicetree: add OF documents for arch-mmp
MAINTAINERS: update MAINTAINERS email entry
Heiko Schocher (1):
ARM: davinci: map default_queue to edma channels
Heiko Stuebner (21):
ARM: S3C24XX: remove unused spi gpio setup functions
ARM: S3C24XX: move spi-s3c24xx platdata out of mach
ARM: S3C24XX: Remove extern declaration of clk_msysclk
ARM: S3C24XX: move common S3C2443 clock definitions to clock.h
ARM: S3C2410: move s3c2410_baseclk_add to clock.h
ARM: SAMSUNG: cleanup of rtc register definitions
rtc-s3c: make room for more variants in devicetree block
rtc-s3c: add variants for S3C2443 and S3C2416
ARM: S3C2443/S3C2416: add s3c_rtc_setname and rename rtc devices
ARM: S3C24XX: Move s3c2443-clock.c to mach-s3c24xx
ARM: S3C24XX: Move common-smdk code to mach directory
ARM: S3C24XX: move simtec-specific code to mach directory
ARM: S3C24XX: Consolidate Simtec extensions
ARM: S3C24XX: Move device setup files to mach directory
ARM: S3C24XX: Fix indentation of dma-s3c2443
ARM: S3C24XX: Reuse S3C2443 dma for S3C2416
ARM: S3C24XX: remove obsolete S3C2416_DMA option
ARM: S3C24XX: remove XXX_setup_clocks method from S3C2443
ARM: S3C24XX: add get_rate for clk_h on S3C2416/2443
ARM: S3C24XX: add get_rate for clk_p on S3C2416/2443
ARM: S3C24XX: remove call to s3c24xx_setup_clocks
Heiko Stübner (2):
pxa: magician/hx4700: Convert to gpio-regulator from bq24022
regulator: Remove bq24022 regulator driver
Hong Xu (1):
ARM: at91: Update struct atmel_nand_data to support PMECC
Huang Shijie (1):
ARM: mxs: add GPMI-NAND support for imx23/imx28
Igor Grinberg (1):
ARM: OMAP3: cm-t3517: add EMAC support
Ilya Yanok (3):
ARM: OMAP: move generic EMAC init to separate file
arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board
ARM: OMAP2+: ads7846_init: put gpio_pendown into pdata if it's provided
Jaccon Bastiaansen (4):
CS89x0 : add platform driver support
CS89x0 : add CS89x0 platform device to the iMX21ADS board
CS89x0 : remove QQ2440 board support from the CS89x0 driver
CS89x0 : add CS89x0 platform device to the iMX31ADS board
Jaecheol Lee (1):
ARM: EXYNOS: add clock registers for exynos4x12-cpufreq
Jaehoon Chung (3):
ARM: SAMSUNG: support the second capability for samsung-soc
mmc: sdhci-s3c: add platform data for the second capability
ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhci
Janusz Krzysztofik (12):
ARM: OMAP1: ams-delta: register latch dependent devices later
ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio
ARM: OMAP1: ams-delta: supersede custom led device by leds-gpio
LED: drop leds-ams-delta driver
MTD: NAND: ams-delta: use GPIO instead of custom I/O
omapfb: lcd_ams_delta: drive control lines over GPIO
input: serio: ams-delta: toggle keyboard power over GPIO
ARM: OMAP1: ams-delta: fix incorrect section tags
ARM: OMAP1: ams-delta: clean up init data section assignments
ARM: OMAP1: ams-delta: set up regulator over modem reset GPIO pin
ARM: OMAP1: ams-delta: update the modem to use regulator API
ASoC: OMAP: ams-delta: drop .set_bias_level callback
Jarkko Nikula (1):
ARM: OMAP: McSPI: Remove unused flag from struct omap2_mcspi_device_config
Jason Cooper (2):
ARM: kirkwood: add dreamplug (fdt) support.
ARM: kirkwood: convert uart0 to devicetree.
Javier Martin (5):
i.MX27: visstrim_m10: Add m41t00 RTC support.
i.MX27: visstrim_m10: Sort IMX_HAVE_PLATFORM_MXC_MMC properly.
i.MX27: visstrim_m10: Register I2C devices after I2C busses have been added.
i.MX27: visstrim_m10: Add video support.
i.MX27: visstrim_m10: Add led support.
Jean Pihet (3):
ARM: OMAP3+: SmartReflex: fix the use of debugfs_create_* API
ARM: OMAP3+: SmartReflex: fix error handling
ARM: OMAP2+: PM debug: fix the use of debugfs_create_* API
Jean-Christophe PLAGNIOL-VILLARD (50):
ARM: at91: code removal of CAP9 SoC
ARM: at91: factorise duplicated at91sam9 idle
ARM: at91/at91x40: remove use of at91_sys_read/write
ARM: at91: make matrix register base soc independent
ARM: at91: make ST (System Timer) soc independent
ARM: at91/pm_slowclock: rename register to named define
ARM: at91/pm_slowclock: function slow_clock() accepts parameters
ARM: at91: move at91rm9200 sdramc defines to at91rm9200_sdramc.h
ARM: at91: make sdram/ddr register base soc independent
ARM: at91/pm_slowclock: add runtime detection of memory contoller
ARM: at91/PMC: make register base soc independent
ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use
ARM: at91:rtc/rtc-at91sam9: ioremap register bank
ARM: at91/rtc-at91sam9: pass the GPBR to use via resources
ARM: at91: finally drop at91_sys_read/write
ARM: at91: merge SRAM Memory banks thanks to mirroring
Atmel: move console default platform_device to serial driver
ARM: at91/board-dt: drop default console
ARM: at91: properly sort dtb files in Makefile.boot
ARM: at91: pit add DT support
ARM: at91: usb_a9g20/dt: add leds support
ARM: at91: at91sam9m10g45ek/dt: add leds support
ARM: at91: at91sam9m10g45ek/dt: add gpio-keys support
ARM: at91: usb_a9g20/dt: add gpio-keys support
ARM: at91: at91sam9x5cm/dt: add leds support
ATMEL: fix nand ecc support
mtd/atmel_nand: add on_flash_bbt to enable the use of On Flash BBT
ARM: at91: enable on flash bbt for Atmel Reference and DT boards
of: introduce helper to manage boolean
of/mtd/nand: add generic bindings and helpers
atmel/nand: add DT support
ARM: at91: sam9x5 add nand support
i2c/gpio: add DT support
ARM: at91: sam9g20 add i2c DT support
ARM: at91: usb_a9g20 add DT i2c support
ARM: at91: sam9g45 add i2c DT support
ARM: at91: sam9x5 add i2c DT support
ARM: at91/dt: add Calao DAB-MMX daugther board support for USB-A9G20
ARM: at91/dt: add specific DT soc init
ARM: at91: add pmc DT support
ARM: at91: always enable sam9 restart
ARM: at91: add RSTC (Reset Controller) dt support
ARM: at91: add ram controller DT support
ARM: at91: add Shutdown Controller (SHDWC) DT support
ARM: at91: usb ohci add dt support
ARM: at91: dt: enable usb ohci for sam9g20, sam9g45 amd sam9x5
ARM: at91: usb ehci add dt support
ARM: at91: dt: enable usb ehci for sam9g45 and sam9x5
USB: at91: Device udc add dt support
ARM: at91: sam9g20 udc add dt support
Jesper Juhl (1):
ARM: Remove redundant ';' from avic_irq_set_priority()
Jett.Zhou (1):
ARM: sa1100: clean up clock support
Jingoo Han (1):
ARM: SAMSUNG: Add a callback 'notify_after' for PWM backlight control
Jon Hunter (1):
ARM: OMAP: Remove definition cpu_is_omap4430()
Joonyoung Shim (2):
ARM: S3C64XX: Add usb otg phy control
ARM: S5PV210: Add usb otg phy control
Josh Wu (2):
ARM: at91: add clock selection parameter for at91_add_device_isi()
ARM: at91: add Atmel ISI and ov2640 support on sam9m10g45 board
Kamil Debski (3):
ARM: EXYNOS: add G2D to mach-nuri
ARM: EXYNOS: add G2D to mach-universal
ARM: SAMSUNG: add G2D to plat-s5p and mach-exynos
Kevin Hilman (6):
ARM: OMAP: convert omap_device_build() and callers to __init
Merge remote-tracking branch 'omap/hsmmc' into for_3.4/cleanup/pm-base
ARM: OMAP: omap_device: remove omap_device_parent
ARM: OMAP2+: PM: fix section mismatch with omap2_init_processor_devices()
ARM: OMAP2+: PM: fix wakeupgen warning when hotplug disabled
ARM: OMAP2+: gpmc-smsc911x: only register regulator for first instance
Kukjin Kim (32):
ARM: EXYNOS: use static declaration when it is not used in other files
ARM: S3C24XX: use static declaration when it is not used in other files
ARM: S3C64XX: use static declaration when it is not used in other files
ARM: S5P64X0: use static declaration when it is not used in other files
ARM: S5PC100: use static declaration when it is not used in other files
ARM: S5PV210: use static declaration when it is not used in other files
ARM: SAMSUNG: use static declaration when it is not used in other files
ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX
ARM: S3C2410: move mach-s3c2410/* into mach-s3c24xx/
ARM: S3C2412: move mach-s3c2412/* into mach-s3c24xx/
ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/
ARM: S3C2440: move mach-s3c2440/* into mach-s3c24xx/
ARM: S3C2443: move mach-s3c2443/* into mach-s3c24xx/
ARM: s3c2410_defconfig: update s3c2410_defconfig
Merge branch 'topic/cleanup-s3c24xx' into next/cleanup-s3c24xx
Merge branch 'topic/cleanup-use-static' into next/cleanup-use-static
Merge branch 'next/cleanup-use-static' into next/cleanup-exynos-clock
ARM: EXYNOS: replace clock.c for other new EXYNOS SoCs
ARM: EXYNOS: use static declaration on regarding clock
ARM: EXYNOS: change the prefix S5P_ to EXYNOS4_ for clock
PM / devfreq: update the name of EXYNOS clock register
ARM: EXYNOS: to declare static for mach-exynos/common.c
ARM: EXYNOS: use exynos_init_uarts() instead of exynos4_init_uarts()
ARM: EXYNOS: add clock part for EXYNOS5250 SoC
ARM: EXYNOS: add initial setup-i2c0 for EXYNOS5
ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5
ARM: EXYNOS: add support for EXYNOS5250 SoC
ARM: EXYNOS: add interrupt definitions for EXYNOS5250
ARM: EXYNOS: add support get_core_count() for EXYNOS5250
ARM: EXYNOS: add support ARCH_EXYNOS5 for EXYNOS5 SoCs
ARM: EXYNOS: add support device tree enabled board file for EXYNOS5
ARM: dts: add initial dts file for EXYNOS5250, SMDK5250
Lauri Hintsala (1):
ARM: mxs: Add initial support for Bluegiga APX4 Development Kit
Laxman Dewangan (2):
ARM: tegra: Pause DMA when reading transfer count
ARM: tegra: dma: not required to move requestor when stopping.
Lee Jones (11):
ARM: ux500: pass parent pointer to each platform device
ARM: ux500: export System-on-Chip information ux500 via sysfs
ARM: ux500: move top level platform devices in sysfs to /sys/devices/socX
ARM: ux500: remove intermediary add_platform_device* functions
ARM: ux500: CONFIG: Enable Device Tree support for future endeavours
ARM: ux500: db8500: list most devices in the snowball device tree
ARM: ux500: Enable Cortex-A9 GIC (Generic Interrupt Controller) in Device Tree
ARM: ux500: Enable PL011 AMBA UART Controller for Device Tree
ARM: ux500: Enable PL310 Level 2 Cache Controller in Device Tree
ARM: ux500: Enable PL022 SSP Controller in Device Tree
ARM: ux500: Provide local timer support for Device Tree
Leon Romanovsky (3):
ARM: dt: tegra: Enable device tree audio codec on PAZ00 board.
ARM: dt: tegra: Enable headset autodetection on PAZ00 board.
ASoC: DT: Add digital microphone binding to PAZ00 board.
Linus Walleij (5):
ARM: plat-nomadik: get rid of global mtu base pointer
ARM: plat-nomadik: handle clocking properly
ARM: plat-nomadik: modernize MTU timer
ARM: ux500: delete TPS6105X selection
ARM: ux500: solve some Kconfig mess
Lothar Waßmann (1):
arm/mxs: Add support for SSP/MMC ports 2 & 3
Magnus Damm (35):
sh: introduce sh_clk_ops in parallel with clk_ops
sh: convert cpg code to sh_clk_ops
ARM: mach-shmobile: sh7367 sh_clk_ops rename
ARM: mach-shmobile: sh7377 sh_clk_ops rename
ARM: mach-shmobile: sh7372 sh_clk_ops rename
ARM: mach-shmobile: sh73a0 sh_clk_ops rename
ARM: mach-shmobile: r8a7740 sh_clk_ops rename
ARM: mach-shmobile: r8a7779 sh_clk_ops rename
sh: sh header sh_clk_ops rename
sh: sh2 sh_clk_ops rename
sh: sh2a sh_clk_ops rename
sh: sh3 sh_clk_ops rename
sh: sh4 sh_clk_ops rename
sh: sh4a sh_clk_ops rename
sh: sh5 sh_clk_ops rename
sh: board sh_clk_ops rename
sh: remove clk_ops
ARM: mach-shmobile: sh7367 map_io and init_early update
ARM: mach-shmobile: sh7377 map_io and init_early update
ARM: mach-shmobile: sh7372 map_io and init_early update
ARM: mach-shmobile: sh73a0 map_io and init_early update
ARM: mach-shmobile: r8a7740 map_io and init_early update
ARM: mach-shmobile: r8a7779 map_io and init_early update
ARM: mach-shmobile: r8a7779 L2 cache support
ARM: mach-shmobile: rename clk_init() to shmobile_clk_init()
ARM: mach-shmobile: Move sh7372 Mackerel external clk setup
ARM: mach-shmobile: Move sh7372 AP4EVB external clk setup
ARM: mach-shmobile: add shmobile_earlytimer_init()
ARM: mach-shmobile: sh7367 and G3EVM timer rework
ARM: mach-shmobile: sh7377 and G4EVM timer rework
ARM: mach-shmobile: sh7372, AP4EVB and Mackerel timer rework
ARM: mach-shmobile: sh73a0, AG5EVM and Kota2 timer rework
ARM: mach-shmobile: r8a7740 and Bonito timer rework
ARM: mach-shmobile: r8a7779 and Marzen timer rework
ARM: mach-shmobile: default to no earlytimer
Manjunath Hadli (10):
ARM: davinci: dm644x: move private definitions to C file
ARM: davinci: dm365: move private definitions to C file
ARM: davinci: dm646x: move private definitions to C file
ARM: davinci: create new common platform header for davinci
ARM: davinci: streamline sysmod access
ARM: davinci: dm644x: improve readability using macro
ARM: davinci: dm644x: fix inconsistent variable naming
ARM: davinci: dm644x: don't force vpfe registeration on all boards
ARM: davinci: dm644x: add support for v4l2 video display
ARM: davinci: dm644x evm: add support for VPBE display
Marc Dietrich (5):
ARM: tegra: paz00: fix wrong SD1 power gpio
ARM: tegra: paz00: fix wrong UART port on mini-pcie plug
ARM: dt: tegra: add ADT7461 temperature sensor to paz00 device tree
ARM: dt: tegra: add the power gpio key to paz00 device tree
ARM: dt: tegra: add the wifi led to paz00 device tree
Marc Zyngier (16):
ARM: smp_twd: make local_timer_stop a symbol instead of a #define
ARM: local timers: introduce a new registration interface
ARM: smp_twd: add runtime registration support
ARM: smp_twd: add device tree support
ARM: OMAP4: convert to twd_local_timer_register() interface
ARM: plat-versatile: convert to twd_local_timer_register() interface
ARM: tegra: convert to twd_local_timer_register() interface
ARM: shmobile: convert to twd_local_timer_register() interface
ARM: ux500: convert to twd_local_timer_register() interface
ARM: highbank: convert to twd_local_timer_register() interface
ARM: imx6q: convert to twd_local_timer_register() interface
ARM: smp_twd: remove old local timer interface
ARM: local timers: convert exynos to runtime registration interface
ARM: local timers: convert MSM to runtime registration interface
ARM: local timers: make the runtime registration interface mandatory
ARM: ux500: fix compilation after local timer rework
Mark Asselstine (1):
rpmsg: fix build warning when dma_addr_t is 64-bit
Mark Brown (12):
ARM: S3C64XX: Support GPIO LEDs on Cragganmore
ARM: S3C64XX: Fix build of Cragganmore after SPI changes
ARM: S3C64XX: Enable power management for disk on Cragganmore
ARM: S3C64XX: Enable power management for WiFi on Cragganmore
ARM: S3C64XX: Add hookup for Tomatin module on Cragganmore
ARM: S3C64XX: Add basic cpuidle driver
ARM: S3C64XX: Add a SPKVDD supply for CODECs on Cragganmore
ARM: S3C64XX: Gate some more clocks by default
ARM: S3C64XX: Reduce residency requirement for cpuidle WFI mode
ARM: S3C64XX: Define some additional always off clocks
ARM: S3C64XX: Add some more Cragganmore module IDs to the table
ARM: S3C64XX: Supply platform data for SPI on Cragganmore
Mark Grosen (2):
remoteproc: do not require an iommu
remoteproc: avoid registering a virtio device if not supported
Masanari Iida (1):
ARM: OMAP1: Fix typo in lcd_dma.c
Maxim Osipov (1):
ARM: at91: Add external RTC for Flexibity board
Mehnert (1):
iomux-mx25.h slew rate adjusted for LCD __LD pins
Mike Turquette (3):
Documentation: common clk API
clk: introduce the common clock framework
clk: basic clock hardware types
Minho Ban (1):
ARM: SAMSUNG: use spin_lock_irqsave() in clk_{enable,disable}
Mircea Gherzan (1):
ARM: OMAP: enable Bluetooth on the PandaBoard
MyungJoo Ham (4):
ARM: EXYNOS: Add DMC1, allow PPMU access for DMC
PM / devfreq: update the name of EXYNOS clock registers that were omitted
ARM: EXYNOS: Add clock register addresses for EXYNOS4X12 bus devfreq driver
ARM: EXYNOS: support Exynos4210-bus Devfreq driver on Nuri board
NeilBrown (2):
ARM: OMAP2+: UART: remove unused fields in omap_uart_state.
ARM: OMAP2+: remove some orphan function declarations.
Nicolas Ferre (29):
Merge remote-tracking branch 'armsoc/depends/rmk/for-armsoc' into at91-3.4-base
ARM: at91/dma: remove platform data from DMA controller
ARM: at91/dma: DMA controller registering with DT support
ARM: at91/at91sam9x5: PMC header file
ARM: at91/at91sam9x5: clock management for at91sam9x5 chip family
ARM: at91/at91sam9x5: Configuration and Makefile
ARM: at91/at91sam9x5: Device tree definition files
Merge remote-tracking branch 'armsoc/at91/device-board' into at91-3.4-base2
Merge remote-tracking branch 'armsoc/at91/9x5' into at91-3.4-base2
ARM: at91/ST: remove not needed casts
ARM: at91/PMC: move assignment out of printf
ARM: at91: add at91sam9g25ek.dts in Makefile.boot
Merge branch 'irqdomain/next' of git://git.secretlab.ca/git/linux-2.6
ARM: at91/aic: add irq domain and device tree support
ARM: at91/snapper9260: move gpio_to_irq out of structure initialization
ARM/USB: at91/ohci-at91: remove the use of irq_to_gpio
ARM: at91/gpio: change comments and one variable name
ARM: at91/gpio: add irqdomain and DT support
ARM: at91/gpio: non-DT builds do not have gpio_chip.of_node field
ARM: at91/gpio: add .to_irq gpio_chip handler
ARM: at91/gpio: remove the static specification of gpio_chip.base
ARM: at91/board-dt: remove AIC irq domain from board file
ARM: at91: AIC and GPIO IRQ device tree initialization
ARM: at91/pit: add traces in case of error
ARM: at91/tclib: take iomem size from resource
ARM: at91/tc: add device tree support to atmel_tclib
ARM: at91/tc/clocksource: Add 32 bit variant to Timer Counter
ARM: at91: add sam9_smc.o to at91sam9x5 build
ARM: at91/pio: add new PIO3 features
Nishanth Menon (6):
ARM: OMAP3+: SmartReflex: fix err interrupt disable sequence
ARM: OMAP3+: SmartReflex Class3: disable errorgen before disable VP
ARM: OMAP3+: SmartReflex: Add a shutdown hook
ARM: OMAP3+: SmartReflex: Fix status masking in ERRCONFIG register
ARM: OMAP3+: SmartReflex: clear ERRCONFIG_VPBOUNDINTST only on a need
ARM: OMAP3+: hwmod: add SmartReflex IRQs
Ohad Ben-Cohen (30):
remoteproc: add framework for controlling remote processors
remoteproc: add debugfs entries
remoteproc: create rpmsg virtio device
remoteproc/omap: add a remoteproc driver for OMAP4
rpmsg: add virtio-based remote processor messaging bus
samples/rpmsg: add an rpmsg driver sample
remoteproc: remove unused resource type
remoteproc/omap: utilize module_platform_driver
remoteproc: look for truncated firmware images
remoteproc: add Kconfig menu
rpmsg: add Kconfig menu
ARM: OMAP: omap_device: Expose omap_device_{alloc, delete, register}
remoteproc: depend on EXPERIMENTAL
rpmsg: depend on EXPERIMENTAL
remoteproc: don't use virtio's weak barriers
remoteproc: bail out if firmware has different endianess
remoteproc: s/big switch/lookup table/
remoteproc: make sure we're parsing a 32bit firmware
remoteproc/omap: two Kconfig fixes
rpmsg: fix name service endpoint leak
rpmsg: validate incoming message length before propagating
rpmsg: fix published buffer length in rpmsg_recv_done
ARM: OMAP: don't build hwspinlock in vain
remoteproc: resource table overhaul
remoteproc: remoteproc_rpmsg -> remoteproc_virtio
remoteproc: safer boot/shutdown order
remoteproc: remove the single rpmsg vdev limitation
remoteproc/omap: remove the mbox_callback limitation
remoteproc: remove the hardcoded vring alignment
remoteproc: cleanup resource table parsing paths
Ola Lilja (3):
ARM: ux500: Add placeholder for clk_set_parent
ARM: ux500: Add DMA-channels for MSP
ARM: ux500: Add audio-regulators
Olof Johansson (56):
ARM: tegra: emc: device tree bindings
ARM: tegra: seaboard: add EMC table to device tree
ARM: tegra: Don't WARN_ON() for too early dma channel allocations
ARM: tegra: use APB DMA for accessing APB devices
ARM: tegra: fuse: use apbio dma for register access
ARM: tegra: fuse: add functions to access chip revision
ARM: tegra: fuse: add bct strapping reading
ARM: tegra: emc: convert tegra2_emc to a platform driver
ARM: tegra: emc: device tree support
Merge branch 'ux500-timers' of git://git.kernel.org/.../linusw/linux-stericsson into ux500/timers
Merge branch 'at91-3.4-base' of git://github.com/at91linux/linux-at91 into next/cleanup
Merge branch 'at91-3.4-base+pm_cleanup' of git://github.com/at91linux/linux-at91 into next/cleanup
Merge branch 'at91-3.4-base' of git://github.com/at91linux/linux-at91 into at91/base
Merge branch 'at91-3.4-base+device_board' of git://github.com/at91linux/linux-at91 into at91/device-board
Merge branch 'at91-3.4-base+pm_cleanup' of git://github.com/at91linux/linux-at91 into at91/pm_cleanup
Merge branch 'at91-3.4-base+9x5' of git://github.com/at91linux/linux-at91 into at91/9x5
Merge branch 'ux500-timers' of git://git.kernel.org/.../linusw/linux-stericsson into next/soc
Merge branch 'mxs/clk' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc
Merge branch 'mxs/defconfig' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc
Merge branch 'at91-3.4-base+9x5' of git://github.com/at91linux/linux-at91 into next/soc
Merge branch 'at91-3.4-base+device_board' of git://github.com/at91linux/linux-at91 into next/drivers
Merge branch 'mxs/boards' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/boards
Merge branch 'features/imx-clk-prepare' of git://git.pengutronix.de/git/imx/linux-2.6 into next/drivers
Merge branch 'for-arm-soc' of git://sources.calxeda.com/kernel/linux into next/soc
Merge branch 'for-3.4/soc' into for-3.4/t30-smp
Merge branch 'for-3.4/soc-drivers' into for-3.4/t30-smp
Merge branch 'depends/rmk/for-armsoc' into for-3.4/cleanup-and-fixes
Merge branch 'fixes-non-critical' of git://git.kernel.org/.../tmlind/linux-omap into next/fixes-non-critical
Merge branch 'cleanup' of git://git.kernel.org/.../tmlind/linux-omap into next/cleanup
Merge branch 'next/cleanup-use-static' of git://git.kernel.org/.../kgene/linux-samsung into next/cleanup
Merge branch 'maintainers' of git://gitorious.org/linux-davinci/linux-davinci into next/maintainers
Merge branch 'fixes-non-critical-part2' of git://git.kernel.org/.../tmlind/linux-omap into next/fixes-non-critical
Merge tag 'rpmsg-fixes-and-more-for-3.4' of git://git.kernel.org/.../ohad/remoteproc into next/rpmsg
Merge branch 'next/cleanup-s3c24xx' of git://git.kernel.org/.../kgene/linux-samsung into next/cleanup
Merge tag 'imx35-imx5-aips-setup' of git://git.pengutronix.de/git/imx/linux-2.6 into next/soc
Merge branch 'dt' of git://github.com/hzhuang1/linux into next/dt
Merge branch 'regulator' of git://github.com/hzhuang1/linux into next/drivers
Merge branch 'rtc' of git://github.com/hzhuang1/linux into next/drivers
Merge branch 'io-cleanup-for-3.4' of git://sources.calxeda.com/kernel/linux into next/cleanup2
Merge branch 'fixes-non-critical-part3' of git://git.kernel.org/.../tmlind/linux-omap into next/fixes-non-critical
Merge branch 'ams-delta' of git://git.kernel.org/.../tmlind/linux-omap into next/boards
Merge branch 'cleanup-pm' of git://git.kernel.org/.../tmlind/linux-omap into next/cleanup
Merge branch 'uart' of git://git.kernel.org/.../tmlind/linux-omap into next/cleanup
Merge branch 'dt-part2' of git://git.kernel.org/.../tmlind/linux-omap into next/dt
Merge branch 'sr' of git://git.kernel.org/.../tmlind/linux-omap into next/drivers
Merge branch 'board' of git://git.kernel.org/.../tmlind/linux-omap into next/boards
Merge branch 'next/devel-samsung' of git://git.kernel.org/.../kgene/linux-samsung into next/soc
Merge branch 'fix-smsc911x-regulator' of git://git.kernel.org/.../tmlind/linux-omap into fixes
Merge branch 'next/cleanup-exynos-clock' of git://git.kernel.org/.../kgene/linux-samsung into next/cleanup
Merge branch 'next/board-samsung' of git://git.kernel.org/.../kgene/linux-samsung into next/boards
Merge branch 'next/devel-samsung-mmc' of git://git.kernel.org/.../kgene/linux-samsung into next/drivers
Merge branch 'next/devel-samsung-dma' of git://git.kernel.org/.../kgene/linux-samsung into next/drivers
Merge branch 'next/devel-samsung-pd' of git://git.kernel.org/.../kgene/linux-samsung into next/drivers
Merge branch 'soc' of git://git.kernel.org/.../rafael/renesas into next/soc
Merge branch 'io-cleanup-for-3.4' of git://sources.calxeda.com/kernel/linux into next/cleanup2
ARM: tegra: update main repo and add patchwork
Paul Parsons (6):
pxa/hx4700: Correct StrataFlash block size discovery
pxa/hx4700: Add ASIC3 LED support
pxa/hx4700: Fix PXA_GPIO_IRQ_BASE/IRQ_NUM values
ARM: pxa/hx4700: Remove unwanted request for GPIO105
ARM: pxa/hx4700: Reduce sleep mode battery discharge by 35%
pxa/hx4700: Remove pcmcia platform_device structure
Paul Walmsley (7):
ARM: OMAP2+: I2C: always compile I2C reset code, even if I2C driver is not built
ARM: OMAP2xxx: PM: remove obsolete timer disable code in the suspend path
ARM: OMAP3: PM: remove superfluous calls to pwrdm_clear_all_prev_pwrst()
ARM: OMAP2+: PM: clean up omap_set_pwrdm_state()
ARM: OMAP2+: PM: share clkdms_setup() across OMAP2, 3, 4
ARM: OMAP2+: omap_device: call all suspend, resume callbacks when OMAP_DEVICE_NO_IDLE_ON_SUSPEND is set
ARM: OMAP2+: PM: share some suspend-related functions across OMAP2, 3, 4
Pawel Moll (8):
ARM: vexpress: Get rid of MMIO_P2V
ARM: versatile: Map local timers using Device Tree when possible
ARM: vexpress: Use FDT data in platform SMP calls
ARM: vexpress: Add Device Tree support
ARM: vexpress: Motherboard RS1 memory map support
ARM: vexpress: Add Device Tree for V2P-CA5s core tile
ARM: vexpress: Add Device Tree for V2P-CA9 core tile
ARM: vexpress: Add Device Tree for V2P-CA15 core tile (TC1 variant)
Peter De Schrijver (20):
ARM: tegra: add support for tegra30 interrupts
ARM: tegra: add support for new clock framework features
ARM: tegra: implement basic tegra30 clock framework
ARM: tegra: enable tegra30 clock framework
ARM: tegra: initialize basic system clocks
ARM: tegra: definitions for flow controller
ARM: tegra: assembler code for LP3
ARM: tegra: cpuidle driver for tegra
ARM: tegra: Avoid compiling cpuidle code when not configured
ARM: tegra: cleanup use of chipid register
ARM: tegra: export Tegra chipid
ARM: tegra: initialize Tegra chipid early
ARM: tegra: functions to access the flowcontroller
ARM: tegra: rework Tegra secondary CPU core bringup
ARM: tegra: prepare powergate.c for multiple variants
ARM: tegra: export tegra_powergate_is_powered()
ARM: tegra: add support for Tegra30 powerdomains
ARM: tegra: support for Tegra30 CPU powerdomains
ARM: tegra: support for secondary cores on Tegra30
ARM: tegra: Enable CPUIdle on Tegra20
Peter Ujfalusi (1):
OMAP4: dma: Correct CPU version check for dma_common_ch_end
Philipp Zabel (1):
MAINTAINERS: update maintainer entry for pxa/hx4700
Philippe Langlais (2):
ARM: ux500: set ARCH_NR_GPIO to 355 on U8500 platforms
ARM: ux500: fix around AB8500 GPIO macro name
Philippe Rétornaz (2):
mx31moboard: update maintainer
mx31moboard: Add watchdog support
Richard Zhao (15):
ARM: mxc: time: add clk_prepare/clk_unprepare
ARM: mxc: ahci: add clk_prepare/clk_unprepare
ARM: mxc: pwm: add clk_prepare/clk_unprepare
ARM: mxc: epit: add clk_prepare/clk_unprepare
ARM: mxc: arch_reset: add clk_prepare/clk_unprepare
ARM: mxc: audmux-v2: add clk_prepare/clk_unprepare
ARM: pm-imx5: add clk_prepare/clk_unprepare
ARM: mx31moboard: add clk_prepare/clk_unprepare
serial: imx: add clk_prepare/clk_unprepare
i2c: imx: add clk_prepare/clk_unprepare
mmc: sdhci-esdhc-imx: add clk_prepare/clk_unprepare
ARM: dts: imx6q-sabrelite: add 2p5v and 3p3v regulators
ARM: dts: imx6q-sabrelite: add sgtl5000 audio codec
ARM: mxc: make imx_dma_is_general_purpose more generic for sdma
ARM: imx6q: add cko1 clock
Rob Herring (29):
ARM: timer-sp: add sched_clock support
ARM: highbank: enable sp804 based sched_clock
ARM: highbank: remove unused memory.h
Merge remote-tracking branch 'arm-soc/at91/base2+cleanup' into cleanup-base
usb: ohci-pxa27x: add explicit include of hardware.h
ARM: provide runtime hook for ioremap/iounmap
ARM: imx: convert to common runtime ioremap hook
ARM: msm: use runtime ioremap hook
ARM: iop13xx: use runtime ioremap hook
ARM: ixp4xx: use runtime ioremap hook
ARM: ebsa110: use runtime ioremap hook
ARM: remove compile time __arch_ioremap/__arch_iounmap
ARM: iop13xx: move io.h externs to pci.h
ARM: msm: clean-up mach/io.h
[media] davinci: remove includes of mach/io.h
ARM: davinci: remove unneeded mach/io.h include
ARM: orion5x: clean-up mach/io.h
ARM: tegra: clean-up mach/io.h
ARM: ep93xx: clean-up mach/io.h
ARM: at91: add explicit include of hardware.h to uncompressor
ARM: dove: add explicit include of dove.h to addr-map.c
ARM: clps711x: remove unneeded include of mach/io.h
ARM: make mach/io.h include optional
ARM: remove bunch of now unused mach/io.h files
ARM: kill off __mem_pci
ARM: fix ioremap/iounmap for !CONFIG_MMU
ARM: iop13xx: fix missing declaration of iop13xx_init_early
ARM: create a common IOMEM definition
ARM: __io abuse cleanup
Roland Stigge (21):
ARM: LPC32xx: Added lpc32xx_defconfig
ARM: LPC32xx: clock.c: warning fix
ARM: LPC32xx: clock.c: Fix mutex lock issues
ARM: LPC32XX: Remove broken non-static declaration
ARM: LPC32xx: clock.c: Missing header file
ARM: LPC32xx: clock.c: jiffies wrapping
ARM: LPC32xx: clock.c: Clock registration fixes
ARM: LPC32xx: Added lpc32xx_defconfig
ARM: LPC32xx: clock.c: warning fix
ARM: LPC32xx: clock.c: Fix mutex lock issues
ARM: LPC32XX: Remove broken non-static declaration
ARM: LPC32xx: clock.c: Missing header file
ARM: LPC32xx: clock.c: jiffies wrapping
ARM: LPC32xx: clock.c: Clock registration fixes
ARM: LPC32xx: ADC support for mach-lpc32xx
ARM: LPC32xx: Fix missing and bad LPC32XX macros
Merge branch 'lpc32xx/fixup' of git://git.kernel.org/.../arm/arm-soc into lpc32xx/tmp
Merge branch 'lpc32xx/fixup2' of git://git.kernel.org/.../arm/arm-soc into lpc32xx/tmp
Merge branch 'lpc32xx/drivers' of git://git.kernel.org/.../arm/arm-soc into lpc32xx/tmp
ARM: LPC32xx: USB Support
ARM: LPC32xx: Ethernet support
Ryan Mallon (10):
ep93xx: Move PHYS_BASE defines to local SoC header file
ep93xx: Don't use system controller defines in audio drivers
ep93xx: Move GPIO defines to gpio-ep93xx.h
ep93xx: Use ioremap for backlight driver
ep93xx: Move peripheral defines to local SoC header
ep93xx: Configure GPIO ports in core code
ep93xx: Make syscon access functions private to SoC
ep93xx: Move crunch code to mach-ep93xx directory
ep93xx: Move EP93XX_SYSCON defines to SoC private header
ep93xx: Remove unnecessary includes of ep93xx-regs.h
Sachin Kamat (15):
ARM: EXYNOS: Enable G2D on ORIGEN
ARM: S5PV210: Add missing FIMC media device to Aquila
ARM: EXYNOS: Add missing FIMC media device to SMDKV310
ARM: EXYNOS: Add missing FIMC media device to Origen
ARM: EXYNOS: Hook up G2D PD to generic PD infrastructure
ARM: EXYNOS: Hook up JPEG PD to generic PD infrastructure
ARM: EXYNOS: Enable G2D on SMDKV310
ARM: S5PV210: Enable MFC on SMDKV210
ARM: S5PV210: Enable MFC on SMDKC110
ARM: S5PV210: Enable FIMC on SMDKV210
ARM: S5PV210: Enable FIMC on SMDKC110
ARM: EXYNOS: Enable JPEG on SMDKV310
ARM: EXYNOS: Enable JPEG on Origen
ARM: S5PV210: Add JPEG board definition
ARM: S5PV210: Enable JPEG on SMDKV210
Sangsu Park (3):
ARM: EXYNOS: add support GPIO for EXYNOS5250
gpio/samsung: add support GPIOlib for EXYNOS5250
gpio/samsung: use ioremap() for EXYNOS4 GPIOlib
Sangwook Lee (1):
ARM: EXYNOS: Enable Bluetooth on ORIGEN
Santosh Shilimkar (2):
ARM: OMAP: fix section mismatch warning for omap4_hotplug_cpu()
ARM: OMAP: Fix section mismatch warning for platform_cpu_die()
Sascha Hauer (4):
ARM i.MX5/6: Add dt support for generic boards
ARM i.MX27: Add devicetree support
ARM i.MX: Add phytec phycore-i.MX27 (aka pcm038) devicetree support
devicetree-bindings: Add documentation for i.MX generic boards
Sekhar Nori (2):
MAINTAINERS: mark TI DaVinci list as "moderated"
MAINTAINERS: add TI DaVinci git tree information
Shawn Guo (8):
ARM: mxs: detect SoC by checking CHIPID register
ARM: imx5: generate dtbs for imx5 boards
ARM: dts: imx51-babbage: update mc13892 device
ARM: dts: imx6q-arm2: add vmmc-supply for usdhc
ARM: dts: imx6q-sabrelite: add vmmc-supply for usdhc
MAINTAINERS: remove arch/arm/mach-mx*/ from IMX entry
ARM: imx: update imx_v6_v7_defconfig
ARM: defconfig: imx_v6_v7: build in REGULATOR_FIXED_VOLTAGE
Shweta Gulati (1):
ARM: OMAP3+: SmartReflex: use voltage domain name in device attributes
Simon Glass (3):
arm: tegra: dts: Support host/device selection and legacy mode
arm: tegra: dts: Add legacy mode support to Tegra2x USB1 port
arm: tegra: dts: Mark USB1 as an OTG port on Seaboard
Stefan Roese (1):
ARM: SPEAr600: Add device-tree support to SPEAr600 boards
Stephen Warren (27):
dt: tegra gpio: Flesh out binding documentation
ARM: dt: tegra30.dtsi: Reformat gpio's interrupts property
ARM: dt: tegra30.dtsi: Add extra GPIO interrupt
ARM: dt: tegra: Add Tegra APB DMA device tree binding
ARM: dt: tegra: Modify I2S nodes to match binding
ARM: dt: tegra: Add labels for I2S controllers
ARM: dt: tegra: Enable audio on WM8903 boards, disable others
ARM: dt: Add binding for Tegra PMC
ARM: tegra: Support Tegra30 in decompressor UART setup
ARM: tegra: uncompress.h: Choose a UART at runtime
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL
ARM: tegra: Remove use of TEGRA_GPIO_TO_IRQ
gpio: tegra: Dynamically allocate IRQ base, and support DT
gpio: tegra: Parameterize the number of banks
ARM: tegra: Fix EMC pdata initialization from registers
ARM: tegra: Add a simple PMC driver
ARM: tegra: Remove duplicate PMU interrupt inversion code
gpio: tegra: Fix build issue due to irq_domain rework.
ARM: dt: Add SD controller configuration to Tegra Cardhu
ARM: tegra: Demote EMC clock inconsistency BUG to WARN
ARM: tegra: select required CPU and L2 errata options
ARM: tegra: uncompress.h: Don't depend on kernel headers
ARM: tegra: match SoC name not board name in DT board files
ARM: dt: Add ARM PMU to tegra*.dtsi
ARM: dt: Explicitly configure all serial ports on Tegra Cardhu
ARM: tegra: update defconfig
MAINTAINERS: ARM: tegra: update Stephen's email address
Sylwester Nawrocki (4):
ARM: EXYNOS: Increase virtual framebuffer size on Universal C210 board
ARM: EXYNOS: Add support for S5K6AAFX image sensor on Universal C210 board
ARM: SAMSUNG: Add support for S5K6AAFX camera on Nuri board
ARM: SAMSUNG: Correct MIPI-CSIS io memory resource definition
Tarun Kanti DebBarma (1):
ARM: OMAP: dmtimer: fix missing content/correction in low-power mode support
Thierry Reding (1):
ARM: tegra: PCIe: Provide 3.3V supply voltage
Tony Lindgren (42):
Merge branch 'omap1-part2' into omap1
Merge branch 'soc-part2' into soc
Merge branch 'for_3.4/dt_base' of git://git.kernel.org/.../bcousson/linux-omap-dt into dt
ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins
ARM: OMAP2+: Set Kconfig dependencies for PROC_DEVICETREE
ARM: OMAP2+: Fix Kconfig dependencies for USB_ARCH_HAS_EHCI
ARM: OMAP2+: Fix OMAP_HDQ_BASE build error
ARM: OMAP2+: Fix board_mux section type conflict when OMAP_MUX is not set
ARM: OMAP2+: Fix zoom LCD backlight if TWL_CORE is not selected
ARM: OMAP: Fix devexit for dma when CONFIG_HOTPLUG is not set
ARM: OMAP2+: Fix multiple randconfig errors with SOC_OMAP and SOC_OMAP_NOOP
ARM: OMAP2+: Fix devexit for smartreflex when CONFIG_HOTPLUG is not set
ARM: OMAP2+: Drop DISPC L3 firewall code
ARM: OMAP2+: Move SDRC related functions from io.h into local common.h
ARM: OMAP: Move omap_init_consistent_dma_size() to local common.h
ARM: OMAP1: Move 16xx GPIO system clock to platform init code
ARM: OMAP1: Move most of plat/io.h into local iomap.h
ARM: OMAP2+: Move most of plat/io.h into local iomap.h
ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and mach/hardware.h
ARM: OMAP2+: Limit omap_read/write usage to legacy USB drivers
ARM: OMAP2+: Mark omap_hsmmc_init and omap_mux related functions as __init
Merge branch 'for_3.4/dts_updates' of git://git.kernel.org/.../bcousson/linux-omap-dt into dt
Merge branch 'iomap' into cleanup
Merge branch 'randconfig' into fixes-non-critical
Merge branch 'hsmmc' into fixes-non-critical
ARM: OMAP2+: Fix L4_EMU_34XX_BASE error after iomap changes
Merge branch 'for_3.4/dt_irq_domain' of git://git.kernel.org/.../bcousson/linux-omap-dt into dt-part2
Merge branch 'omap1' into ams-delta
ARM: OMAP2+: Fix build error when only ARCH_OMAP2/3 or 4 is selected
ARM: OMAP2+: Remove extra ifdefs for board-generic
Merge branch 'for_3.4/cleanup/sr' of git://git.kernel.org/.../khilman/linux-omap-pm into sr
Revert "ARM: OMAP2+: Fix multiple randconfig errors with SOC_OMAP and SOC_OMAP_NOOP"
ARM: OMAP1: Fix section mismatch for omap1_init_early()
ARM: OMAP2+: Fix omap24xx_io_desc warning if SoC subtypes are not selected
ARM: OMAP2: Fix section warning for n8x0 when CONFIG_MMC_OMAP is not set
Merge branch 'for_3.4/cleanup/pm' of git://git.kernel.org/.../khilman/linux-omap-pm into cleanup-pm
Merge branch 'for_3.4/cleanup/uart' of git://git.kernel.org/.../khilman/linux-omap-pm into uart
ARM: OMAP: Remove remaining includes for mach/io.h
ARM: OMAP2+: Fix build error after merge
ARM: OMAP2+: Fix build issues with missing include of linux/bug.h
ARM: OMAP2+: Fix section warnings for hsmmc_init_one
ARM: OMAP2+: Fix build for omap4 only builds with missing include of linux/bug.h
Tushar Behera (7):
ARM: SAMSUNG: Add __init attribute to samsung_bl_set()
ARM: SAMSUNG: fix __init attribute on regarding s3c_set_platdata()
ARM: EXYNOS: Add __init attribute to nuri_camera_init()
ARM: EXYNOS: Add __init attribute to universal_camera_init()
ARM: EXYNOS: Add apb_pclk clkdev entry for mdma1
ARM: EXYNOS: Add clkdev lookup entry for lcd clock
ARM: EXYNOS: Fix compilation error with mach-exynos4-dt board
Uwe Kleine-König (3):
ARM: OMAP4: board-4430sdp: don't initialize value that is never used
ARM: davinci: cpufreq: fix compiler warning
ARM: davinci: DA850: move da850_register_pm to .init.text
Vaibhav Bedia (1):
ARM: OMAP: sram: Add am33xx SRAM support (minimal)
Vaibhav Hiremath (3):
ARM: OMAP2+: Make cpu_rev static global variable
ARM: OMAP2+: split omap2/3/4_check_revision function
arm/dts: Add support for TI OMAP3 EVM board
Vladimir Zapolskiy (1):
ARM: OMAP3: RX-51: add explicit mux configuration of tsc2005 control gpios
Wolfram Sang (4):
ARM: mx28: check for gated clocks when setting saif divider
ARM: mxs: read correct values when setting up MAC
arm: lpc32xx: phy3250: add rtc & touch device
arm: lpc32xx: phy3250: add rtc & touch device
Yuan Jiangli (1):
ARM: OMAP3+: PM: VP: fix integer truncation error
wu guoxing (1):
ARM : mx35: 3ds-board: add framebuffer device
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists