| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1332626568-17812-11-git-send-email-arnd@arndb.de>
Date: Sat, 24 Mar 2012 22:02:47 +0000
From: Arnd Bergmann <arnd@...db.de>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
arm@...nel.org, Arnd Bergmann <arnd@...db.de>
Subject: [GIT PULL 08/09] ARM: driver specific updates
These are all specific to some driver. They are typically the platform
side of a change in the drivers directory, such as adding a new driver
or extending the interface to the platform. In cases where there is no
maintainer for the driver, or the maintainer prefers to have the
platform changes in the same branch as the driver changes, the patches
to the drivers are included as well.
A much smaller set of driver updates that depend on other branches
getting merged first will be sent later.
The new export of tegra_chip_uid conflicts with other changes in fuse.c.
In rtc-sa1100.c, the global removal of IRQF_DISABLED conflicts with
the cleanup of the interrupt handling of that driver.
Signed-off-by: Arnd Bergmann <arnd@...db.de>
The following changes since commit "b740514 Merge branch 'next/drivers'
into for-next", leading up to commit " 511f1cb Merge tag 'regulator-3.4'
of git://git.kernel.org/pu", are available in
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git tags/drivers
Arnd Bergmann (13):
Merge branch 'v3.4-next/devel-samsung-rtc' of git://git.kernel.org/.../kgene/linux-samsung into next/drivers
Merge branch 'lpc32xx/drivers' into next/drivers
Merge branch 'features/cs89x0' of git://git.pengutronix.de/git/imx/linux-2.6 into next/drivers
Merge branch 'imx-drivers' of git://git.pengutronix.de/git/imx/linux-2.6 into next/drivers
Merge branch 'mxs/gpmi' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/drivers
Merge branch 'imx/driver' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/drivers
Merge branch 'rtc-sa1100' of git://github.com/hzhuang1/linux into next/drivers
Merge tag 'tegra-soc-drivers' of git://git.kernel.org/.../olof/tegra into tegra/soc-drivers
Merge branch 'depends/irqdomain' into next/drivers
Merge branch 'imx/defconfig' into next/drivers
Merge branch 'next/fixes-non-critical' into next/drivers
Merge tag 'regulator-3.4' of git://git.kernel.org/.../broonie/regulator into next/drivers
Merge branch 'next/drivers' into for-next
Boojin Kim (2):
ARM: EXYNOS: Enable MDMA driver
ARM: EXYNOS: add support DMA for EXYNOS4X12 SoC
Dirk Behme (1):
ARM: imx6: Rename DEBUG_IMX6Q_UART to UART4
Doug Anderson (2):
ARM: tegra: Introduce define DEBUG_UART_SHIFT
ARM: tegra: uncompress.h: Store UART address in a variable
Fabio Estevam (3):
ARM: imx_v6_v7_defconfig: Add support for framebuffer and camera on mx31
ARM: mx27_3ds: Add camera support
ARM: imx_v4_v5_defconfig: Update defconfig
Felipe Balbi (4):
ARM: OMAP3+: SmartReflex: add missing platform_set_drvdata()
ARM: OMAP3+: SmartReflex: move late_initcall() closer to its argument
ARM: OMAP3+: SmartReflex: misc cleanups
ARM: OMAP3+: SmartReflex: micro-optimization for sanity check
Haojian Zhuang (5):
rtc: sa1100: declare irq in resource
ARM: pxa: add rtc dummy clock
rtc: sa1100: enable clk support
ARM: mmp: enable rtc in pxa910
rtc: sa1100: add OF support
Heiko Stuebner (4):
ARM: SAMSUNG: cleanup of rtc register definitions
rtc-s3c: make room for more variants in devicetree block
rtc-s3c: add variants for S3C2443 and S3C2416
ARM: S3C2443/S3C2416: add s3c_rtc_setname and rename rtc devices
Heiko Stübner (2):
pxa: magician/hx4700: Convert to gpio-regulator from bq24022
regulator: Remove bq24022 regulator driver
Hong Xu (1):
ARM: at91: Update struct atmel_nand_data to support PMECC
Huang Shijie (1):
ARM: mxs: add GPMI-NAND support for imx23/imx28
Jaccon Bastiaansen (4):
CS89x0 : add platform driver support
CS89x0 : add CS89x0 platform device to the iMX21ADS board
CS89x0 : remove QQ2440 board support from the CS89x0 driver
CS89x0 : add CS89x0 platform device to the iMX31ADS board
Jaehoon Chung (3):
ARM: SAMSUNG: support the second capability for samsung-soc
mmc: sdhci-s3c: add platform data for the second capability
ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhci
Jean Pihet (2):
ARM: OMAP3+: SmartReflex: fix the use of debugfs_create_* API
ARM: OMAP3+: SmartReflex: fix error handling
Jett.Zhou (1):
ARM: sa1100: clean up clock support
Josh Wu (2):
ARM: at91: add clock selection parameter for at91_add_device_isi()
ARM: at91: add Atmel ISI and ov2640 support on sam9m10g45 board
Laxman Dewangan (2):
ARM: tegra: Pause DMA when reading transfer count
ARM: tegra: dma: not required to move requestor when stopping.
Leon Romanovsky (2):
ARM: dt: tegra: Enable device tree audio codec on PAZ00 board.
ARM: dt: tegra: Enable headset autodetection on PAZ00 board.
Maxim Osipov (1):
ARM: at91: Add external RTC for Flexibity board
Nicolas Ferre (2):
ARM: at91/dma: remove platform data from DMA controller
ARM: at91/dma: DMA controller registering with DT support
Nishanth Menon (6):
ARM: OMAP3+: SmartReflex: fix err interrupt disable sequence
ARM: OMAP3+: SmartReflex Class3: disable errorgen before disable VP
ARM: OMAP3+: SmartReflex: Add a shutdown hook
ARM: OMAP3+: SmartReflex: Fix status masking in ERRCONFIG register
ARM: OMAP3+: SmartReflex: clear ERRCONFIG_VPBOUNDINTST only on a need
ARM: OMAP3+: hwmod: add SmartReflex IRQs
Olof Johansson (16):
ARM: tegra: emc: device tree bindings
ARM: tegra: seaboard: add EMC table to device tree
ARM: tegra: Don't WARN_ON() for too early dma channel allocations
ARM: tegra: use APB DMA for accessing APB devices
ARM: tegra: fuse: use apbio dma for register access
ARM: tegra: fuse: add functions to access chip revision
ARM: tegra: fuse: add bct strapping reading
ARM: tegra: emc: convert tegra2_emc to a platform driver
ARM: tegra: emc: device tree support
Merge branch 'at91-3.4-base+device_board' of git://github.com/at91linux/linux-at91 into next/drivers
Merge branch 'features/imx-clk-prepare' of git://git.pengutronix.de/git/imx/linux-2.6 into next/drivers
Merge branch 'regulator' of git://github.com/hzhuang1/linux into next/drivers
Merge branch 'rtc' of git://github.com/hzhuang1/linux into next/drivers
Merge branch 'sr' of git://git.kernel.org/.../tmlind/linux-omap into next/drivers
Merge branch 'next/devel-samsung-mmc' of git://git.kernel.org/.../kgene/linux-samsung into next/drivers
Merge branch 'next/devel-samsung-dma' of git://git.kernel.org/.../kgene/linux-samsung into next/drivers
Richard Zhao (13):
ARM: mxc: time: add clk_prepare/clk_unprepare
ARM: mxc: ahci: add clk_prepare/clk_unprepare
ARM: mxc: pwm: add clk_prepare/clk_unprepare
ARM: mxc: epit: add clk_prepare/clk_unprepare
ARM: mxc: arch_reset: add clk_prepare/clk_unprepare
ARM: mxc: audmux-v2: add clk_prepare/clk_unprepare
ARM: pm-imx5: add clk_prepare/clk_unprepare
ARM: mx31moboard: add clk_prepare/clk_unprepare
serial: imx: add clk_prepare/clk_unprepare
i2c: imx: add clk_prepare/clk_unprepare
mmc: sdhci-esdhc-imx: add clk_prepare/clk_unprepare
ARM: mxc: make imx_dma_is_general_purpose more generic for sdma
ARM: imx6q: add cko1 clock
Roland Stigge (1):
ARM: LPC32xx: ADC support for mach-lpc32xx
Shweta Gulati (1):
ARM: OMAP3+: SmartReflex: use voltage domain name in device attributes
Stephen Warren (19):
dt: tegra gpio: Flesh out binding documentation
ARM: dt: tegra30.dtsi: Reformat gpio's interrupts property
ARM: dt: tegra30.dtsi: Add extra GPIO interrupt
ARM: dt: tegra: Add Tegra APB DMA device tree binding
ARM: dt: tegra: Modify I2S nodes to match binding
ARM: dt: tegra: Add labels for I2S controllers
ARM: dt: tegra: Enable audio on WM8903 boards, disable others
ARM: dt: Add binding for Tegra PMC
ARM: tegra: Support Tegra30 in decompressor UART setup
ARM: tegra: uncompress.h: Choose a UART at runtime
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL
ARM: tegra: Remove use of TEGRA_GPIO_TO_IRQ
gpio: tegra: Dynamically allocate IRQ base, and support DT
gpio: tegra: Parameterize the number of banks
ARM: tegra: Fix EMC pdata initialization from registers
ARM: tegra: Add a simple PMC driver
ARM: tegra: Remove duplicate PMU interrupt inversion code
gpio: tegra: Fix build issue due to irq_domain rework.
ARM: tegra: uncompress.h: Don't depend on kernel headers
Tony Lindgren (1):
Merge branch 'for_3.4/cleanup/sr' of git://git.kernel.org/.../khilman/linux-omap-pm into sr
Tushar Behera (1):
ARM: EXYNOS: Add apb_pclk clkdev entry for mdma1
.../devicetree/bindings/arm/tegra/emc.txt | 100 +++++++++
.../bindings/arm/tegra/nvidia,tegra20-pmc.txt | 19 ++
.../devicetree/bindings/dma/tegra20-apbdma.txt | 30 +++
.../devicetree/bindings/gpio/gpio_nvidia.txt | 36 +++-
arch/arm/Kconfig | 2 +-
arch/arm/Kconfig.debug | 6 +-
arch/arm/boot/dts/tegra-harmony.dts | 45 +++-
arch/arm/boot/dts/tegra-paz00.dts | 30 +++
arch/arm/boot/dts/tegra-seaboard.dts | 78 +++++++
arch/arm/boot/dts/tegra-trimslice.dts | 12 +
arch/arm/boot/dts/tegra-ventana.dts | 42 ++++
arch/arm/boot/dts/tegra20.dtsi | 43 ++++-
arch/arm/boot/dts/tegra30.dtsi | 53 +++++-
arch/arm/configs/imx_v4_v5_defconfig | 18 ++
arch/arm/configs/imx_v6_v7_defconfig | 34 +++
arch/arm/configs/magician_defconfig | 2 +-
arch/arm/mach-at91/at91sam9263_devices.c | 13 +-
arch/arm/mach-at91/at91sam9g45_devices.c | 94 ++++++++
arch/arm/mach-at91/board-flexibity.c | 12 +-
arch/arm/mach-at91/board-sam9m10g45ek.c | 80 +++++++-
arch/arm/mach-at91/include/mach/board.h | 6 +-
arch/arm/mach-exynos/Kconfig | 3 +
arch/arm/mach-exynos/clock-exynos4.c | 9 +
arch/arm/mach-exynos/dma.c | 117 ++++++++++-
arch/arm/mach-exynos/include/mach/irqs.h | 2 +
arch/arm/mach-exynos/include/mach/map.h | 3 +-
arch/arm/mach-exynos/mach-nuri.c | 4 +-
arch/arm/mach-exynos/mach-universal_c210.c | 2 +-
arch/arm/mach-imx/Kconfig | 1 +
arch/arm/mach-imx/clock-imx6q.c | 74 +++++++-
arch/arm/mach-imx/lluart.c | 2 +-
arch/arm/mach-imx/mach-mx21ads.c | 16 ++-
arch/arm/mach-imx/mach-mx27_3ds.c | 108 +++++++++
arch/arm/mach-imx/mach-mx31ads.c | 35 +++-
arch/arm/mach-imx/mach-mx31moboard.c | 2 +-
arch/arm/mach-imx/pm-imx5.c | 4 +-
arch/arm/mach-lpc32xx/clock.c | 36 +++
arch/arm/mach-lpc32xx/common.c | 22 ++
arch/arm/mach-lpc32xx/common.h | 1 +
arch/arm/mach-lpc32xx/phy3250.c | 1 +
arch/arm/mach-mmp/include/mach/pxa910.h | 1 +
arch/arm/mach-mmp/include/mach/regs-apbc.h | 1 +
arch/arm/mach-mmp/include/mach/regs-rtc.h | 23 ++
arch/arm/mach-mmp/pxa910.c | 27 +++
arch/arm/mach-mmp/ttc_dkb.c | 1 +
arch/arm/mach-mxs/clock-mx23.c | 1 +
arch/arm/mach-mxs/clock-mx28.c | 1 +
arch/arm/mach-mxs/devices-mx23.h | 4 +
arch/arm/mach-mxs/devices-mx28.h | 4 +
arch/arm/mach-mxs/devices/Kconfig | 3 +
arch/arm/mach-mxs/devices/Makefile | 1 +
arch/arm/mach-mxs/devices/platform-gpmi-nand.c | 81 +++++++
arch/arm/mach-mxs/include/mach/devices-common.h | 10 +
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 31 +++-
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 19 ++-
arch/arm/mach-omap2/smartreflex-class3.c | 1 +
arch/arm/mach-omap2/smartreflex.c | 227 +++++++++++++++-----
arch/arm/mach-omap2/smartreflex.h | 10 +
arch/arm/mach-omap2/sr_device.c | 11 +-
arch/arm/mach-pxa/devices.c | 28 ++-
arch/arm/mach-pxa/hx4700.c | 33 +++-
arch/arm/mach-pxa/magician.c | 33 +++-
arch/arm/mach-pxa/pxa3xx.c | 1 +
arch/arm/mach-pxa/pxa95x.c | 1 +
arch/arm/mach-s3c24xx/s3c2416.c | 2 +
arch/arm/mach-s3c24xx/s3c2443.c | 2 +
arch/arm/mach-sa1100/clock.c | 82 ++++---
arch/arm/mach-sa1100/generic.c | 8 +
arch/arm/mach-tegra/Makefile | 3 +-
arch/arm/mach-tegra/apbio.c | 145 +++++++++++++
arch/arm/mach-tegra/apbio.h | 39 ++++
arch/arm/mach-tegra/board-harmony-power.c | 15 --
arch/arm/mach-tegra/board-harmony.c | 2 +-
arch/arm/mach-tegra/board-seaboard.c | 5 +-
arch/arm/mach-tegra/common.c | 20 ++
arch/arm/mach-tegra/dma.c | 128 +++++++-----
arch/arm/mach-tegra/fuse.c | 107 +++++++---
arch/arm/mach-tegra/fuse.h | 34 +++-
arch/arm/mach-tegra/include/mach/debug-macro.S | 88 +++++++-
arch/arm/mach-tegra/include/mach/gpio-tegra.h | 2 -
arch/arm/mach-tegra/include/mach/irammap.h | 35 +++
arch/arm/mach-tegra/include/mach/uncompress.h | 120 ++++++++++-
arch/arm/mach-tegra/pmc.c | 76 +++++++
arch/arm/mach-tegra/pmc.h | 23 ++
arch/arm/mach-tegra/tegra2_clocks.c | 2 +-
arch/arm/mach-tegra/tegra2_emc.c | 224 +++++++++++++++++--
arch/arm/mach-tegra/tegra2_emc.h | 11 +-
arch/arm/plat-mxc/devices/platform-ahci-imx.c | 16 +-
arch/arm/plat-mxc/epit.c | 2 +-
arch/arm/plat-mxc/include/mach/board-mx31ads.h | 33 ---
arch/arm/plat-mxc/include/mach/debug-macro.S | 2 +-
arch/arm/plat-mxc/include/mach/dma.h | 3 +-
arch/arm/plat-mxc/pwm.c | 4 +-
arch/arm/plat-mxc/system.c | 2 +-
arch/arm/plat-mxc/time.c | 2 +-
arch/arm/plat-omap/include/plat/omap_hwmod.h | 2 -
arch/arm/plat-samsung/include/plat/dma-pl330.h | 16 ++
arch/arm/plat-samsung/include/plat/regs-rtc.h | 81 ++++----
arch/arm/plat-samsung/include/plat/rtc-core.h | 27 +++
arch/arm/plat-samsung/include/plat/sdhci.h | 2 +
arch/arm/plat-samsung/platformdata.c | 2 +
drivers/gpio/gpio-tegra.c | 59 ++++--
drivers/i2c/busses/i2c-imx.c | 4 +-
drivers/mmc/host/sdhci-esdhc-imx.c | 6 +-
drivers/mmc/host/sdhci-s3c.c | 6 +-
drivers/net/Space.c | 2 +
drivers/net/ethernet/cirrus/Kconfig | 19 +-
drivers/net/ethernet/cirrus/cs89x0.c | 148 +++++++++++---
drivers/regulator/Kconfig | 8 -
drivers/regulator/Makefile | 1 -
drivers/regulator/bq24022.c | 162 --------------
drivers/rtc/Kconfig | 4 +-
drivers/rtc/rtc-s3c.c | 71 +++++--
drivers/rtc/rtc-sa1100.c | 128 ++++++++---
drivers/tty/serial/imx.c | 7 +-
include/linux/platform_data/tegra_emc.h | 34 +++
include/linux/regulator/bq24022.h | 24 --
sound/soc/imx/imx-audmux.c | 8 +-
118 files changed, 3077 insertions(+), 731 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists