linux-kernel - Re: IPv6 flapping with kernel 3.3 (regression from 3.2.9)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <201203250843.45055.maciej.rutecki@gmail.com>
Date:	Sun, 25 Mar 2012 08:43:44 +0200
From:	Maciej Rutecki <maciej.rutecki@...il.com>
To:	Marc Haber <mh+linux-kernel@...schlus.de>
Cc:	linux-kernel@...r.kernel.org, netdev@...r.kernel.org
Subject: Re: IPv6 flapping with kernel 3.3 (regression from 3.2.9)

On czwartek, 22 marca 2012 o 08:34:28 Marc Haber wrote:
> Hi,
> 
> I have a host which has IPv6 misbehaving when running with Linux 3.3.
> It is flawlessly working with Linux 3.2.9.
> 
> The host
> - is running Debian stable (x64_64) with a few locally built and/or
>   backported packages, including the kernel.
> - has native IPv6 connectivity on eth0
> - is not doing SLAAC on eth0, both IP address (from 2a01/16) and
>   default gateway (fe80::1) are statically configured
> - is running a handful of VMs using KVM/libvirt
> - has IPv6 forwarding enabled
> - does IPv4 NAT
> - has a handful of iptables rules, both for v4 and v6. ICMP and ICMPv6
>   are fully open
> 
> - the gateway is not under my control
> - the VMs are either bridged to br0 or to br1
> - both br0 and br1 have an IPv6 /64 and radvd running to provide IPv6
>   to the VMs
> 
> This setup is unique in my machine list, my other machines either are
> no KVM hosts or do only have IPv6 tunneled.
> 
> When I run the box with kernel 3.3, it drops off the IPv6 network
> every few minutes and is not responding to pings any more. This state
> stays like 30 seconds to a minute and then IPv6 resumes. It looks to
> me that the box does not lose its default route though. Once in a
> while, I see "fe80::1 dev eth0  router FAILED" in the ip neigh output.
> 
> Running a continuous ping in either direction doesn't seem to help.
> 
> Booting the box back to 3.2.9 immediately fixes the issue.
> 
> I have not yet re-tried going back to 3.3 since a few of the VMs are
> too important to reboot again today. I tried running tcpdump on eth0
> over night but hit br1 instead, so I don't have any packet dumps to
> show.
> 
> I guess that something goes wrong with neighbor detection regarding
> the IPv6 gateway.
> 
> Was there a relevant change between 3.2.9 and 3.3? Where do I look for
> the issue?
> 
> Greetings
> Marc

I created a Bugzilla entry at 
https://bugzilla.kernel.org/show_bug.cgi?id=42991
for your bug/regression report, please add your address to the CC list in 
there, thanks!

-- 
Maciej Rutecki
http://www.mrutecki.pl
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/