| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1332808075-8333-6-git-send-email-ddaney.cavm@gmail.com>
Date: Mon, 26 Mar 2012 17:27:55 -0700
From: David Daney <ddaney.cavm@...il.com>
To: linux-mips@...ux-mips.org, ralf@...ux-mips.org,
devicetree-discuss@...ts.ozlabs.org,
Grant Likely <grant.likely@...retlab.ca>,
Rob Herring <rob.herring@...xeda.com>
Cc: linux-kernel@...r.kernel.org, David Daney <david.daney@...ium.com>
Subject: [PATCH 5/5] MIPS: Octeon: Use device tree to register serial ports.
From: David Daney <david.daney@...ium.com>
Switch to using the device tree to register serial ports.
Add all the ports with compatible = "cavium,octeon-3860-uart". Octeon serial
ports have their own device type, required port flags, and I/O
functions, so using of_serial.c is not indicated.
We need to do this as late_initcall, as the 8250 driver must be
initialized before we add any ports. 8250 initialization is done at
device_initcall time.
The OCTEON_IRQ_UART{0,1,2} symbols are removed as they are now unused
and interfere with irq_domain used by the device tree code.
Signed-off-by: David Daney <david.daney@...ium.com>
---
Should probably go via Ralf's linux-mips.org tree.
arch/mips/cavium-octeon/octeon-irq.c | 4 -
arch/mips/cavium-octeon/serial.c | 134 +++++++++++++--------------------
2 files changed, 53 insertions(+), 85 deletions(-)
diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c
index 76f1364..c7eaa23 100644
--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -1168,9 +1168,6 @@ static void __init octeon_irq_init_ciu(void)
octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX0, 0, 32, chip_mbox, handle_percpu_irq);
octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX1, 0, 33, chip_mbox, handle_percpu_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_UART0, 0, 34, chip, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_UART1, 0, 35, chip, handle_level_irq);
-
for (i = 0; i < 4; i++)
octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_PCI_INT0, 0, i + 36, chip, handle_level_irq);
for (i = 0; i < 4; i++)
@@ -1187,7 +1184,6 @@ static void __init octeon_irq_init_ciu(void)
for (i = 0; i < 16; i++)
octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WDOG0, 1, i + 0, chip_wd, handle_level_irq);
- octeon_irq_set_ciu_mapping(OCTEON_IRQ_UART2, 1, 16, chip, handle_level_irq);
octeon_irq_set_ciu_mapping(OCTEON_IRQ_USB1, 1, 17, chip, handle_level_irq);
gpio_node = of_find_compatible_node(NULL, NULL, "cavium,octeon-3860-gpio");
diff --git a/arch/mips/cavium-octeon/serial.c b/arch/mips/cavium-octeon/serial.c
index 057f0ae..138b221 100644
--- a/arch/mips/cavium-octeon/serial.c
+++ b/arch/mips/cavium-octeon/serial.c
@@ -43,95 +43,67 @@ void octeon_serial_out(struct uart_port *up, int offset, int value)
cvmx_write_csr((uint64_t)(up->membase + (offset << 3)), (u8)value);
}
-/*
- * Allocated in .bss, so it is all zeroed.
- */
-#define OCTEON_MAX_UARTS 3
-static struct plat_serial8250_port octeon_uart8250_data[OCTEON_MAX_UARTS + 1];
-static struct platform_device octeon_uart8250_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = octeon_uart8250_data,
- },
-};
-
-static void __init octeon_uart_set_common(struct plat_serial8250_port *p)
+static int __devinit octeon_serial_probe(struct platform_device *pdev)
{
- p->flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
- p->type = PORT_OCTEON;
- p->iotype = UPIO_MEM;
- p->regshift = 3; /* I/O addresses are every 8 bytes */
+ int irq, res;
+ struct resource *res_mem;
+ struct uart_port port;
+
+ /* All adaptors have an irq. */
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ memset(&port, 0, sizeof(port));
+
+ port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
+ port.type = PORT_OCTEON;
+ port.iotype = UPIO_MEM;
+ port.regshift = 3;
+ port.dev = &pdev->dev;
+
if (octeon_is_simulation())
/* Make simulator output fast*/
- p->uartclk = 115200 * 16;
+ port.uartclk = 115200 * 16;
else
- p->uartclk = octeon_get_io_clock_rate();
- p->serial_in = octeon_serial_in;
- p->serial_out = octeon_serial_out;
-}
+ port.uartclk = octeon_get_io_clock_rate();
-static int __init octeon_serial_init(void)
-{
- int enable_uart0;
- int enable_uart1;
- int enable_uart2;
- struct plat_serial8250_port *p;
-
-#ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
- /*
- * If we are configured to run as the second of two kernels,
- * disable uart0 and enable uart1. Uart0 is owned by the first
- * kernel
- */
- enable_uart0 = 0;
- enable_uart1 = 1;
-#else
- /*
- * We are configured for the first kernel. We'll enable uart0
- * if the bootloader told us to use 0, otherwise will enable
- * uart 1.
- */
- enable_uart0 = (octeon_get_boot_uart() == 0);
- enable_uart1 = (octeon_get_boot_uart() == 1);
-#ifdef CONFIG_KGDB
- enable_uart1 = 1;
-#endif
-#endif
-
- /* Right now CN52XX is the only chip with a third uart */
- enable_uart2 = OCTEON_IS_MODEL(OCTEON_CN52XX);
-
- p = octeon_uart8250_data;
- if (enable_uart0) {
- /* Add a ttyS device for hardware uart 0 */
- octeon_uart_set_common(p);
- p->membase = (void *) CVMX_MIO_UARTX_RBR(0);
- p->mapbase = CVMX_MIO_UARTX_RBR(0) & ((1ull << 49) - 1);
- p->irq = OCTEON_IRQ_UART0;
- p++;
- }
+ port.serial_in = octeon_serial_in;
+ port.serial_out = octeon_serial_out;
+ port.irq = irq;
- if (enable_uart1) {
- /* Add a ttyS device for hardware uart 1 */
- octeon_uart_set_common(p);
- p->membase = (void *) CVMX_MIO_UARTX_RBR(1);
- p->mapbase = CVMX_MIO_UARTX_RBR(1) & ((1ull << 49) - 1);
- p->irq = OCTEON_IRQ_UART1;
- p++;
- }
- if (enable_uart2) {
- /* Add a ttyS device for hardware uart 2 */
- octeon_uart_set_common(p);
- p->membase = (void *) CVMX_MIO_UART2_RBR;
- p->mapbase = CVMX_MIO_UART2_RBR & ((1ull << 49) - 1);
- p->irq = OCTEON_IRQ_UART2;
- p++;
+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res_mem == NULL) {
+ dev_err(&pdev->dev, "found no memory resource\n");
+ return -ENXIO;
}
+ port.mapbase = res_mem->start;
+ port.membase = ioremap(res_mem->start, resource_size(res_mem));
- BUG_ON(p > &octeon_uart8250_data[OCTEON_MAX_UARTS]);
+ res = serial8250_register_port(&port);
- return platform_device_register(&octeon_uart8250_device);
+ return res >= 0 ? 0 : res;
}
-device_initcall(octeon_serial_init);
+static struct of_device_id octeon_serial_match[] = {
+ {
+ .compatible = "cavium,octeon-3860-uart",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, octeon_serial_match);
+
+static struct platform_driver octeon_serial_driver = {
+ .probe = octeon_serial_probe,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "octeon_serial",
+ .of_match_table = octeon_serial_match,
+ },
+};
+
+static int __init octeon_serial_init(void)
+{
+ return platform_driver_register(&octeon_serial_driver);
+}
+late_initcall(octeon_serial_init);
--
1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists