[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1332959199-32161-7-git-send-email-djkurtz@chromium.org>
Date: Thu, 29 Mar 2012 02:26:38 +0800
From: Daniel Kurtz <djkurtz@...omium.org>
To: Daniel Vetter <daniel@...ll.ch>, Keith Packard <keithp@...thp.com>,
David Airlie <airlied@...ux.ie>,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org
Cc: Benson Leung <bleung@...omium.org>,
Yufeng Shen <miletus@...omium.org>,
Daniel Kurtz <djkurtz@...omium.org>
Subject: [PATCH 6/7 v6] drm/i915/intel_i2c: reuse GMBUS2 value read in polling loop
Save the GMBUS2 value read while polling for state changes, and then
reuse this value when determining for which reason the loops were exited.
This is a small optimization which saves a couple of bus accesses for
memory mapped IO registers.
To avoid "assigning in if clause" checkpatch errors", use a ret variable
to store the wait_for macro return value.
Signed-off-by: Daniel Kurtz <djkurtz@...omium.org>
---
drivers/gpu/drm/i915/intel_i2c.c | 34 ++++++++++++++++++++++------------
1 files changed, 22 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index 9c07ff2..60f90cb 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -219,13 +219,16 @@ gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
GMBUS_SLAVE_READ | GMBUS_SW_RDY);
POSTING_READ(GMBUS2 + reg_offset);
do {
+ int ret;
u32 val, loop = 0;
+ u32 gmbus2;
- if (wait_for(I915_READ(GMBUS2 + reg_offset) &
- (GMBUS_SATOER | GMBUS_HW_RDY),
- 50))
+ ret = wait_for((gmbus2 = I915_READ(GMBUS2 + reg_offset)) &
+ (GMBUS_SATOER | GMBUS_HW_RDY),
+ 50);
+ if (ret)
return -ETIMEDOUT;
- if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
+ if (gmbus2 & GMBUS_SATOER)
return -ENXIO;
val = I915_READ(GMBUS3 + reg_offset);
@@ -260,6 +263,9 @@ gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);
POSTING_READ(GMBUS2 + reg_offset);
while (len) {
+ int ret;
+ u32 gmbus2;
+
val = loop = 0;
do {
val |= *buf++ << (8 * loop);
@@ -268,11 +274,12 @@ gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
I915_WRITE(GMBUS3 + reg_offset, val);
POSTING_READ(GMBUS2 + reg_offset);
- if (wait_for(I915_READ(GMBUS2 + reg_offset) &
- (GMBUS_SATOER | GMBUS_HW_RDY),
- 50))
+ ret = wait_for((gmbus2 = I915_READ(GMBUS2 + reg_offset)) &
+ (GMBUS_SATOER | GMBUS_HW_RDY),
+ 50);
+ if (ret)
return -ETIMEDOUT;
- if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
+ if (gmbus2 & GMBUS_SATOER)
return -ENXIO;
}
return 0;
@@ -342,6 +349,8 @@ gmbus_xfer(struct i2c_adapter *adapter,
I915_WRITE(GMBUS0 + reg_offset, bus->reg0);
for (i = 0; i < num; i++) {
+ u32 gmbus2;
+
if (gmbus_is_index_read(msgs, i, num)) {
ret = gmbus_xfer_index_read(dev_priv, &msgs[i]);
i += 1; /* set i to the index of the read xfer */
@@ -356,11 +365,12 @@ gmbus_xfer(struct i2c_adapter *adapter,
if (ret == -ENXIO)
goto clear_err;
- if (wait_for(I915_READ(GMBUS2 + reg_offset) &
- (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE),
- 50))
+ ret = wait_for((gmbus2 = I915_READ(GMBUS2 + reg_offset)) &
+ (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE),
+ 50);
+ if (ret)
goto timeout;
- if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
+ if (gmbus2 & GMBUS_SATOER)
goto clear_err;
}
--
1.7.7.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists