[<prev] [next>] [day] [month] [year] [list]
Message-Id: <1333137905-13809-7-git-send-email-u.kleine-koenig@pengutronix.de>
Date: Fri, 30 Mar 2012 22:04:57 +0200
From: Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>
To: linux-kernel@...r.kernel.org,
Andrew Morton <akpm@...ux-foundation.org>
Cc: kernel@...gutronix.de, Ralf Baechle <ralf@...ux-mips.org>,
linux-mips@...ux-mips.org
Subject: [PATCH v2 07/15] mips: mark const init data with __initconst instead of __initdata
As long as there is no other non-const variable marked __initdata in the
same compilation unit it doesn't hurt. If there were one however
compilation would fail with
error: $variablename causes a section type conflict
because a section containing const variables is marked read only and so
cannot contain non-const variables.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
Cc: Ralf Baechle <ralf@...ux-mips.org>
Cc: linux-mips@...ux-mips.org
---
changes since (implicit) v1:
- drop wrong changes to arch/mips/bcm63xx/boards/board_bcm963xx.c
arch/mips/bcm63xx/dev-pcmcia.c | 4 ++--
arch/mips/mti-malta/malta-setup.c | 2 +-
arch/mips/pci/fixup-mpc30x.c | 4 ++--
arch/mips/powertv/asic/asic-calliope.c | 2 +-
arch/mips/powertv/asic/asic-cronus.c | 2 +-
arch/mips/powertv/asic/asic-gaia.c | 2 +-
arch/mips/powertv/asic/asic-zeus.c | 2 +-
7 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/mips/bcm63xx/dev-pcmcia.c b/arch/mips/bcm63xx/dev-pcmcia.c
index de4d917..a551bab 100644
--- a/arch/mips/bcm63xx/dev-pcmcia.c
+++ b/arch/mips/bcm63xx/dev-pcmcia.c
@@ -79,11 +79,11 @@ static int __init config_pcmcia_cs(unsigned int cs,
return ret;
}
-static const __initdata struct {
+static const struct {
unsigned int cs;
unsigned int base;
unsigned int size;
-} pcmcia_cs[3] = {
+} pcmcia_cs[3] __initconst = {
{
.cs = MPI_CS_PCMCIA_COMMON,
.base = BCM_PCMCIA_COMMON_BASE_PA,
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index b7f37d4..2e28f65 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -111,7 +111,7 @@ static void __init pci_clock_check(void)
unsigned int __iomem *jmpr_p =
(unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int));
int jmpr = (__raw_readl(jmpr_p) >> 2) & 0x07;
- static const int pciclocks[] __initdata = {
+ static const int pciclocks[] __initconst = {
33, 20, 25, 30, 12, 16, 37, 10
};
int pciclock = pciclocks[jmpr];
diff --git a/arch/mips/pci/fixup-mpc30x.c b/arch/mips/pci/fixup-mpc30x.c
index e08f49c..8e4f828 100644
--- a/arch/mips/pci/fixup-mpc30x.c
+++ b/arch/mips/pci/fixup-mpc30x.c
@@ -22,13 +22,13 @@
#include <asm/vr41xx/mpc30x.h>
-static const int internal_func_irqs[] __initdata = {
+static const int internal_func_irqs[] __initconst = {
VRC4173_CASCADE_IRQ,
VRC4173_AC97_IRQ,
VRC4173_USB_IRQ,
};
-static const int irq_tab_mpc30x[] __initdata = {
+static const int irq_tab_mpc30x[] __initconst = {
[12] = VRC4173_PCMCIA1_IRQ,
[13] = VRC4173_PCMCIA2_IRQ,
[29] = MQ200_IRQ,
diff --git a/arch/mips/powertv/asic/asic-calliope.c b/arch/mips/powertv/asic/asic-calliope.c
index 0a170e0..7773f3d 100644
--- a/arch/mips/powertv/asic/asic-calliope.c
+++ b/arch/mips/powertv/asic/asic-calliope.c
@@ -28,7 +28,7 @@
#define CALLIOPE_ADDR(x) (CALLIOPE_IO_BASE + (x))
-const struct register_map calliope_register_map __initdata = {
+const struct register_map calliope_register_map __initconst = {
.eic_slow0_strt_add = {.phys = CALLIOPE_ADDR(0x800000)},
.eic_cfg_bits = {.phys = CALLIOPE_ADDR(0x800038)},
.eic_ready_status = {.phys = CALLIOPE_ADDR(0x80004c)},
diff --git a/arch/mips/powertv/asic/asic-cronus.c b/arch/mips/powertv/asic/asic-cronus.c
index bbc0c12..da076db 100644
--- a/arch/mips/powertv/asic/asic-cronus.c
+++ b/arch/mips/powertv/asic/asic-cronus.c
@@ -28,7 +28,7 @@
#define CRONUS_ADDR(x) (CRONUS_IO_BASE + (x))
-const struct register_map cronus_register_map __initdata = {
+const struct register_map cronus_register_map __initconst = {
.eic_slow0_strt_add = {.phys = CRONUS_ADDR(0x000000)},
.eic_cfg_bits = {.phys = CRONUS_ADDR(0x000038)},
.eic_ready_status = {.phys = CRONUS_ADDR(0x00004C)},
diff --git a/arch/mips/powertv/asic/asic-gaia.c b/arch/mips/powertv/asic/asic-gaia.c
index 91dda68..47683b3 100644
--- a/arch/mips/powertv/asic/asic-gaia.c
+++ b/arch/mips/powertv/asic/asic-gaia.c
@@ -23,7 +23,7 @@
#include <linux/init.h>
#include <asm/mach-powertv/asic.h>
-const struct register_map gaia_register_map __initdata = {
+const struct register_map gaia_register_map __initconst = {
.eic_slow0_strt_add = {.phys = GAIA_IO_BASE + 0x000000},
.eic_cfg_bits = {.phys = GAIA_IO_BASE + 0x000038},
.eic_ready_status = {.phys = GAIA_IO_BASE + 0x00004C},
diff --git a/arch/mips/powertv/asic/asic-zeus.c b/arch/mips/powertv/asic/asic-zeus.c
index 4a05bb0..6ff4b10 100644
--- a/arch/mips/powertv/asic/asic-zeus.c
+++ b/arch/mips/powertv/asic/asic-zeus.c
@@ -28,7 +28,7 @@
#define ZEUS_ADDR(x) (ZEUS_IO_BASE + (x))
-const struct register_map zeus_register_map __initdata = {
+const struct register_map zeus_register_map __initconst = {
.eic_slow0_strt_add = {.phys = ZEUS_ADDR(0x000000)},
.eic_cfg_bits = {.phys = ZEUS_ADDR(0x000038)},
.eic_ready_status = {.phys = ZEUS_ADDR(0x00004c)},
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists