| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20120330194841.226970637@linuxfoundation.org>
Date: Fri, 30 Mar 2012 12:49:09 -0700
From: Greg KH <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: torvalds@...ux-foundation.org, akpm@...ux-foundation.org,
alan@...rguk.ukuu.org.uk, Donald Lee <donald@...x.com.tw>
Subject: [ 036/149] USB: serial: mos7840: Fixed MCS7820 device attach problem
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Donald Lee <donald@...x.com.tw>
commit 093ea2d3a766cb8a4c4de57efec6c0a127a58792 upstream.
A MCS7820 device supports two serial ports and a MCS7840 device supports
four serial ports. Both devices use the same driver, but the attach function
in driver was unable to correctly handle the port numbers for MCS7820
device. This problem has been fixed in this patch and this fix has been
verified on x86 Linux kernel 3.2.9 with both MCS7820 and MCS7840 devices.
Signed-off-by: Donald Lee <donald@...x.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/usb/serial/mos7840.c | 81 +++++++++++++++++++++++++++++--------------
1 file changed, 56 insertions(+), 25 deletions(-)
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -174,6 +174,7 @@
#define CLK_MULTI_REGISTER ((__u16)(0x02))
#define CLK_START_VALUE_REGISTER ((__u16)(0x03))
+#define GPIO_REGISTER ((__u16)(0x07))
#define SERIAL_LCR_DLAB ((__u16)(0x0080))
@@ -1103,14 +1104,25 @@ static int mos7840_open(struct tty_struc
mos7840_port->read_urb = port->read_urb;
/* set up our bulk in urb */
-
- usb_fill_bulk_urb(mos7840_port->read_urb,
- serial->dev,
- usb_rcvbulkpipe(serial->dev,
- port->bulk_in_endpointAddress),
- port->bulk_in_buffer,
- mos7840_port->read_urb->transfer_buffer_length,
- mos7840_bulk_in_callback, mos7840_port);
+ if ((serial->num_ports == 2)
+ && ((((__u16)port->number -
+ (__u16)(port->serial->minor)) % 2) != 0)) {
+ usb_fill_bulk_urb(mos7840_port->read_urb,
+ serial->dev,
+ usb_rcvbulkpipe(serial->dev,
+ (port->bulk_in_endpointAddress) + 2),
+ port->bulk_in_buffer,
+ mos7840_port->read_urb->transfer_buffer_length,
+ mos7840_bulk_in_callback, mos7840_port);
+ } else {
+ usb_fill_bulk_urb(mos7840_port->read_urb,
+ serial->dev,
+ usb_rcvbulkpipe(serial->dev,
+ port->bulk_in_endpointAddress),
+ port->bulk_in_buffer,
+ mos7840_port->read_urb->transfer_buffer_length,
+ mos7840_bulk_in_callback, mos7840_port);
+ }
dbg("mos7840_open: bulkin endpoint is %d",
port->bulk_in_endpointAddress);
@@ -1521,13 +1533,25 @@ static int mos7840_write(struct tty_stru
memcpy(urb->transfer_buffer, current_position, transfer_size);
/* fill urb with data and submit */
- usb_fill_bulk_urb(urb,
- serial->dev,
- usb_sndbulkpipe(serial->dev,
- port->bulk_out_endpointAddress),
- urb->transfer_buffer,
- transfer_size,
- mos7840_bulk_out_data_callback, mos7840_port);
+ if ((serial->num_ports == 2)
+ && ((((__u16)port->number -
+ (__u16)(port->serial->minor)) % 2) != 0)) {
+ usb_fill_bulk_urb(urb,
+ serial->dev,
+ usb_sndbulkpipe(serial->dev,
+ (port->bulk_out_endpointAddress) + 2),
+ urb->transfer_buffer,
+ transfer_size,
+ mos7840_bulk_out_data_callback, mos7840_port);
+ } else {
+ usb_fill_bulk_urb(urb,
+ serial->dev,
+ usb_sndbulkpipe(serial->dev,
+ port->bulk_out_endpointAddress),
+ urb->transfer_buffer,
+ transfer_size,
+ mos7840_bulk_out_data_callback, mos7840_port);
+ }
data1 = urb->transfer_buffer;
dbg("bulkout endpoint is %d", port->bulk_out_endpointAddress);
@@ -1840,7 +1864,7 @@ static int mos7840_send_cmd_write_baud_r
} else {
#ifdef HW_flow_control
- / *setting h/w flow control bit to 0 */
+ /* setting h/w flow control bit to 0 */
Data = 0xb;
mos7840_port->shadowMCR = Data;
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
@@ -2309,19 +2333,26 @@ static int mos7840_ioctl(struct tty_stru
static int mos7840_calc_num_ports(struct usb_serial *serial)
{
- int mos7840_num_ports = 0;
+ __u16 Data = 0x00;
+ int ret = 0;
+ int mos7840_num_ports;
- dbg("numberofendpoints: cur %d, alt %d",
- (int)serial->interface->cur_altsetting->desc.bNumEndpoints,
- (int)serial->interface->altsetting->desc.bNumEndpoints);
- if (serial->interface->cur_altsetting->desc.bNumEndpoints == 5) {
- mos7840_num_ports = serial->num_ports = 2;
- } else if (serial->interface->cur_altsetting->desc.bNumEndpoints == 9) {
+ ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &Data,
+ VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+
+ if ((Data & 0x01) == 0) {
+ mos7840_num_ports = 2;
+ serial->num_bulk_in = 2;
+ serial->num_bulk_out = 2;
+ serial->num_ports = 2;
+ } else {
+ mos7840_num_ports = 4;
serial->num_bulk_in = 4;
serial->num_bulk_out = 4;
- mos7840_num_ports = serial->num_ports = 4;
+ serial->num_ports = 4;
}
- dbg ("mos7840_num_ports = %d", mos7840_num_ports);
+
return mos7840_num_ports;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists