[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1333099923.26252.0.camel@dhruva>
Date: Fri, 30 Mar 2012 15:02:03 +0530
From: Ashish Jangam <ashish.jangam@...tcummins.com>
To: Wim Van Sebroeck <wim@...ana.be>
CC: <linux-kernel@...r.kernel.org>, <linux-watchdog@...r.kernel.org>,
David Dajun Chen <dajun.chen@...semi.com>,
<linaro-dev@...ts.linaro.org>, <sameo@...ux.intel.com>
Subject: Re: [PATCH 05/07] Watchdog: DA9052/53 watchdog support v1
Any update on this patch?
On Tue, 2012-03-13 at 17:57 +0530, Ashish Jangam wrote:
> Any update on below patch?
> On Mon, 2012-02-06 at 18:18 +0530, Ashish Jangam wrote:
> > This driver adds support for the watchdog functionality provided by the
> > Dialog Semiconductor DA9052/53 PMIC chip.
> >
> > This patch is functionally tested on Samsung SMDKV6410.
> >
> > Signed-off-by: David Dajun Chen <dchen@...semi.com>
> > Signed-off-by: Ashish Jangam <ashish.jangam@...tcummins.com>
> > ---
> > Documentation/watchdog/watchdog-parameters.txt | 5 +
> > drivers/watchdog/Kconfig | 6 +
> > drivers/watchdog/Makefile | 1 +
> > drivers/watchdog/da9052_wdt.c | 333 ++++++++++++++++++++++++
> > 4 files changed, 345 insertions(+), 0 deletions(-)
> > create mode 100644 drivers/watchdog/da9052_wdt.c
> > diff --git a/Documentation/watchdog/watchdog-parameters.txt b/Documentation/watchdog/watchdog-parameters.txt
> > index 17ddd82..04fddba 100644
> > --- a/Documentation/watchdog/watchdog-parameters.txt
> > +++ b/Documentation/watchdog/watchdog-parameters.txt
> > @@ -78,6 +78,11 @@ wd0_timeout: Default watchdog0 timeout in 1/10secs
> > wd1_timeout: Default watchdog1 timeout in 1/10secs
> > wd2_timeout: Default watchdog2 timeout in 1/10secs
> > -------------------------------------------------
> > +da9052wdt:
> > +timeout: Watchdog timeout in seconds. 2<= timeout <=131, default=2.048s
> > +nowayout: Watchdog cannot be stopped once started
> > + (default=kernel config parameter)
> > +-------------------------------------------------
> > davinci_wdt:
> > heartbeat: Watchdog heartbeat period in seconds from 1 to 600, default 60
> > -------------------------------------------------
> > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> > index 877b107..3fb9633 100644
> > --- a/drivers/watchdog/Kconfig
> > +++ b/drivers/watchdog/Kconfig
> > @@ -63,6 +63,12 @@ config SOFT_WATCHDOG
> > To compile this driver as a module, choose M here: the
> > module will be called softdog.
> >
> > +config DA9052_WATCHDOG
> > + tristate "Dialog DA9052/DA9053 Watchdog"
> > + depends on PMIC_DA9052
> > + help
> > + Support for the watchdog in the DA9052-BC and DA9053-AA/Bx PMICs.
> > +
> > config WM831X_WATCHDOG
> > tristate "WM831x watchdog"
> > depends on MFD_WM831X
> > diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> > index e8f479a..0ecbe5a 100644
> > --- a/drivers/watchdog/Makefile
> > +++ b/drivers/watchdog/Makefile
> > @@ -166,4 +166,5 @@ obj-$(CONFIG_XEN_WDT) += xen_wdt.o
> > obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
> > obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
> > obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
> > +obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
> > obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
> > diff --git a/drivers/watchdog/da9052_wdt.c b/drivers/watchdog/da9052_wdt.c
> > new file mode 100644
> > index 0000000..b08091e
> > --- /dev/null
> > +++ b/drivers/watchdog/da9052_wdt.c
> > @@ -0,0 +1,333 @@
> > +/*
> > + * System monitoring driver for DA9052 PMICs.
> > + *
> > + * Copyright(c) 2012 Dialog Semiconductor Ltd.
> > + *
> > + * Author: Dajun Chen <dchen@...semi.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + */
> > +
> > +#include <linux/miscdevice.h>
> > +#include <linux/module.h>
> > +#include <linux/delay.h>
> > +#include <linux/fs.h>
> > +#include <linux/uaccess.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/time.h>
> > +#include <linux/watchdog.h>
> > +#include <linux/types.h>
> > +#include <linux/kernel.h>
> > +
> > +#include <linux/mfd/da9052/reg.h>
> > +#include <linux/mfd/da9052/da9052.h>
> > +
> > +static int nowayout = WATCHDOG_NOWAYOUT;
> > +static int wdt_state = WDIOS_DISABLECARD;
> > +static struct miscdevice da9052_wdt_miscdev;
> > +static unsigned long da9052_wdt_users;
> > +static int da9052_wdt_expect_close;
> > +struct da9052 *da9052;
> > +static DEFINE_MUTEX(wdt_mutex);
> > +
> > +static struct {
> > + u8 reg_val;
> > + int time; /* Seconds */
> > +} da9052_wdt_maps[] = {
> > + { 1, 2 },
> > + { 2, 4 },
> > + { 3, 8 },
> > + { 4, 16 },
> > + { 5, 32 },
> > + { 5, 33 }, /* Actual time 32.768s so included both 32s and 33s */
> > + { 6, 65 },
> > + { 6, 66 }, /* Actual time 65.536s so include both, 65s and 66s */
> > + { 7, 131 },
> > +};
> > +
> > +static int da9052_wdt_set_timeout(struct da9052 *da9052, unsigned char timeout)
> > +{
> > + int ret;
> > +
> > + /* Disable the Watchdog timer for 150us before changing the
> > + * time out value
> > + */
> > + ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG,
> > + DA9052_CONTROLD_TWDSCALE, 0);
> > + if (ret < 0) {
> > + dev_err(da9052->dev, "Failed to disable watchdog bit, %d\n",
> > + ret);
> > + return ret;
> > + }
> > +
> > + mutex_lock(&wdt_mutex);
> > + wdt_state = (timeout == 0) ? WDIOS_DISABLECARD : WDIOS_ENABLECARD;
> > + mutex_unlock(&wdt_mutex);
> > +
> > + if (timeout) {
> > + udelay(150);
> > +
> > + /* Set the desired timeout */
> > + ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG,
> > + DA9052_CONTROLD_TWDSCALE, timeout);
> > + if (ret < 0) {
> > + dev_err(da9052->dev,
> > + "Failed to update timescale bit, %d\n", ret);
> > + return ret;
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int da9052_wdt_start(struct da9052 *da9052)
> > +{
> > + int ret = 0;
> > +
> > +
> > + if (wdt_state == WDIOS_DISABLECARD) {
> > + /* Default 2.048s */
> > + ret = da9052_wdt_set_timeout(da9052, 1);
> > + if (ret <= 0)
> > + goto err;
> > +
> > + mutex_lock(&wdt_mutex);
> > + wdt_state = WDIOS_ENABLECARD;
> > + mutex_unlock(&wdt_mutex);
> > + }
> > +
> > +err:
> > + return ret;
> > +}
> > +
> > +static int da9052_wdt_stop(struct da9052 *da9052)
> > +{
> > + int ret = 0;
> > +
> > + mutex_lock(&wdt_mutex);
> > +
> > + if (wdt_state == WDIOS_ENABLECARD) {
> > + ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG,
> > + DA9052_CONTROLD_TWDSCALE, 0);
> > + if (ret < 0) {
> > + dev_err(da9052->dev,
> > + "Failed to disable watchdog bit strobe bit, %d\n",
> > + ret);
> > + goto err;
> > + }
> > +
> > + wdt_state = WDIOS_DISABLECARD;
> > + }
> > +
> > +err:
> > + mutex_unlock(&wdt_mutex);
> > + return ret;
> > +}
> > +
> > +static void da9052_wdt_strobe(struct da9052 *da9052)
> > +{
> > + int ret;
> > +
> > + if (wdt_state == WDIOS_ENABLECARD) {
> > + ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG,
> > + DA9052_CONTROLD_WATCHDOG, 1 << 7);
> > + if (ret < 0) {
> > + dev_err(da9052->dev,
> > + "Failed to update watchdog strobe bit, %d\n",
> > + ret);
> > + return;
> > + }
> > + }
> > +}
> > +
> > +static int da9052_wdt_open(struct inode *inode, struct file *file)
> > +{
> > + int ret;
> > +
> > + if (test_and_set_bit(0, &da9052_wdt_users))
> > + return -EBUSY;
> > +
> > + ret = da9052_wdt_start(da9052);
> > + if (ret < 0)
> > + return ret;
> > +
> > + return nonseekable_open(inode, file);
> > +}
> > +
> > +static int da9052_wdt_release(struct inode *inode, struct file *file)
> > +{
> > + int ret = 0;
> > +
> > + if (da9052_wdt_expect_close == 42)
> > + ret = da9052_wdt_stop(da9052);
> > + else
> > + da9052_wdt_strobe(da9052);
> > +
> > + da9052_wdt_expect_close = 0;
> > + clear_bit(0, &da9052_wdt_users);
> > +
> > + return ret;
> > +}
> > +
> > +static struct watchdog_info da9052_wdt_info = {
> > + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
> > + .identity = "DA9052 Watchdog",
> > +};
> > +
> > +static long da9052_wdt_ioctl(struct file *file, uint cmd, unsigned long arg)
> > +{
> > + void __user *argp = (void __user *)arg;
> > + int ret = 0, timeout, i, __user *p = argp;
> > +
> > + switch (cmd) {
> > + case WDIOC_GETSUPPORT:
> > + ret = copy_to_user(argp, &da9052_wdt_info,
> > + sizeof(da9052_wdt_info)) ? -EFAULT : 0;
> > + break;
> > + case WDIOC_GETSTATUS:
> > + case WDIOC_GETBOOTSTATUS:
> > + ret = put_user(0, p);
> > + break;
> > + case WDIOC_SETOPTIONS:
> > + {
> > + int options;
> > + ret = get_user(options, p);
> > + if (ret)
> > + break;
> > +
> > + if (options == WDIOS_ENABLECARD)
> > + ret = da9052_wdt_start(da9052);
> > +
> > + if (options == WDIOS_DISABLECARD)
> > + ret = da9052_wdt_stop(da9052);
> > +
> > + break;
> > + }
> > + case WDIOC_KEEPALIVE:
> > + da9052_wdt_strobe(da9052);
> > + break;
> > + case WDIOC_SETTIMEOUT:
> > + ret = get_user(timeout, p);
> > + if (ret)
> > + break;
> > +
> > + for (i = 0; i < ARRAY_SIZE(da9052_wdt_maps); i++)
> > + if (da9052_wdt_maps[i].time == timeout)
> > + break;
> > + if (i == ARRAY_SIZE(da9052_wdt_maps))
> > + ret = -EINVAL;
> > + else
> > + ret = da9052_wdt_set_timeout(da9052,
> > + da9052_wdt_maps[i].reg_val);
> > +
> > + break;
> > + case WDIOC_GETTIMEOUT:
> > + ret = da9052_reg_read(da9052, DA9052_CONTROL_D_REG);
> > + if (ret < 0)
> > + break;
> > +
> > + ret &= DA9052_CONTROLD_TWDSCALE;
> > + for (i = 0; i < ARRAY_SIZE(da9052_wdt_maps); i++)
> > + if (da9052_wdt_maps[i].reg_val == ret)
> > + break;
> > + if (i == ARRAY_SIZE(da9052_wdt_maps))
> > + ret = -EINVAL;
> > + else
> > + ret = put_user(da9052_wdt_maps[i].time, p);
> > +
> > + break;
> > + default:
> > + return -ENOTTY;
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static ssize_t da9052_wdt_write(struct file *file,
> > + const char __user *data, size_t count,
> > + loff_t *ppos)
> > +{
> > + size_t i;
> > +
> > + /* Check the magic character 'V' and reload the timer */
> > + if (count) {
> > + if (!nowayout) {
> > + da9052_wdt_expect_close = 0;
> > +
> > + /* scan for magic character */
> > + for (i = 0; i != count; i++) {
> > + char c;
> > + if (get_user(c, data + i))
> > + return -EFAULT;
> > + if (c == 'V')
> > + da9052_wdt_expect_close = 42;
> > + }
> > + /* someone wrote to us, we should reload the timer */
> > + da9052_wdt_strobe(da9052);
> > + }
> > + }
> > + return count;
> > +}
> > +
> > +static const struct file_operations da9052_wdt_fops = {
> > + .owner = THIS_MODULE,
> > + .llseek = no_llseek,
> > + .unlocked_ioctl = da9052_wdt_ioctl,
> > + .write = da9052_wdt_write,
> > + .open = da9052_wdt_open,
> > + .release = da9052_wdt_release,
> > +};
> > +
> > +static struct miscdevice da9052_wdt_miscdev = {
> > + .minor = WATCHDOG_MINOR,
> > + .name = "da9052-wdt",
> > + .fops = &da9052_wdt_fops,
> > +};
> > +
> > +static int __devinit da9052_wdt_probe(struct platform_device *pdev)
> > +{
> > + int ret;
> > +
> > + da9052 = dev_get_drvdata(pdev->dev.parent);
> > +
> > + ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG,
> > + DA9052_CONTROLD_TWDSCALE, 0);
> > + if (ret < 0) {
> > + dev_err(&pdev->dev, "Failed to disable watchdog bits, %d\n",
> > + ret);
> > + return ret;
> > + }
> > +
> > + da9052_wdt_miscdev.parent = &pdev->dev;
> > +
> > + ret = misc_register(&da9052_wdt_miscdev);
> > +
> > + return ret;
> > +}
> > +
> > +static int __devexit da9052_wdt_remove(struct platform_device *dev)
> > +{
> > + misc_deregister(&da9052_wdt_miscdev);
> > +
> > + return 0;
> > +}
> > +
> > +static struct platform_driver da9052_wdt_driver = {
> > + .probe = da9052_wdt_probe,
> > + .remove = __devexit_p(da9052_wdt_remove),
> > + .driver = {
> > + .name = "da9052-watchdog",
> > + .owner = THIS_MODULE,
> > + },
> > +};
> > +
> > +module_platform_driver(da9052_wdt_driver);
> > +
> > +MODULE_AUTHOR("David Dajun Chen <dchen@...semi.com>");
> > +MODULE_DESCRIPTION("DA9052 SM Device Driver");
> > +MODULE_LICENSE("GPL");
> > +MODULE_ALIAS("platform:da9052-wdt");
> >
> >
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists