| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1334037944.15859.8.camel@phoenix>
Date: Tue, 10 Apr 2012 14:05:44 +0800
From: Axel Lin <axel.lin@...il.com>
To: linux-kernel@...r.kernel.org
Cc: Sangbeom Kim <sbkim73@...sung.com>, Liam Girdwood <lrg@...com>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>
Subject: [PATCH RESEND 1/3] regulator: Rework s5m8767_set_voltage to support
both LDOs and BUCKs
s5m8767_set_voltage not only implement set_voltage callbacks for LDOs,
but also for BUCKs when s5m8767->buck_gpioindex is not set.
s5m8767_set_voltage_buck actually only for buck[2|3|4] when
s5m8767->buck_gpioindex is set.
Conditionally calling s5m8767_set_voltage in s5m8767_set_voltage_buck makes
the code hard to read.
I think merging s5m8767_set_voltage_buck and s5m8767_set_voltage actually
simplifies things. It's easy to use buck234_vol pointer to differentiate if
we need to control voltage for buck[2|3|4] by DVS GPIOs.
This patch reworks s5m8767_set_voltage to support both LDOx and BUCKx in all
cases.
Signed-off-by: Axel Lin <axel.lin@...il.com>
Acked-by: Sangbeom Kim <sbkim73@...sung.com>
---
drivers/regulator/s5m8767.c | 145 +++++++++++++++----------------------------
1 files changed, 50 insertions(+), 95 deletions(-)
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 4ca2db0..7576134 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -305,14 +305,33 @@ static int s5m8767_convert_voltage_to_sel(
return selector;
}
+static inline void s5m8767_set_high(struct s5m8767_info *s5m8767)
+{
+ int temp_index = s5m8767->buck_gpioindex;
+
+ gpio_set_value(s5m8767->buck_gpios[0], (temp_index >> 2) & 0x1);
+ gpio_set_value(s5m8767->buck_gpios[1], (temp_index >> 1) & 0x1);
+ gpio_set_value(s5m8767->buck_gpios[2], temp_index & 0x1);
+}
+
+static inline void s5m8767_set_low(struct s5m8767_info *s5m8767)
+{
+ int temp_index = s5m8767->buck_gpioindex;
+
+ gpio_set_value(s5m8767->buck_gpios[2], temp_index & 0x1);
+ gpio_set_value(s5m8767->buck_gpios[1], (temp_index >> 1) & 0x1);
+ gpio_set_value(s5m8767->buck_gpios[0], (temp_index >> 2) & 0x1);
+}
+
static int s5m8767_set_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV, unsigned *selector)
{
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
const struct s5m_voltage_desc *desc;
int reg_id = rdev_get_id(rdev);
- int sel, reg, mask, ret;
+ int sel, reg, mask, ret = 0, old_index, index = 0;
u8 val;
+ u8 *buck234_vol = NULL;
switch (reg_id) {
case S5M8767_LDO1 ... S5M8767_LDO28:
@@ -320,6 +339,12 @@ static int s5m8767_set_voltage(struct regulator_dev *rdev,
break;
case S5M8767_BUCK1 ... S5M8767_BUCK6:
mask = 0xff;
+ if (reg_id == S5M8767_BUCK2 && s5m8767->buck2_gpiodvs)
+ buck234_vol = &s5m8767->buck2_vol[0];
+ else if (reg_id == S5M8767_BUCK3 && s5m8767->buck3_gpiodvs)
+ buck234_vol = &s5m8767->buck3_vol[0];
+ else if (reg_id == S5M8767_BUCK4 && s5m8767->buck4_gpiodvs)
+ buck234_vol = &s5m8767->buck4_vol[0];
break;
case S5M8767_BUCK7 ... S5M8767_BUCK8:
return -EINVAL;
@@ -336,102 +361,32 @@ static int s5m8767_set_voltage(struct regulator_dev *rdev,
if (sel < 0)
return sel;
- ret = s5m8767_get_voltage_register(rdev, ®);
- if (ret)
- return ret;
-
- s5m_reg_read(s5m8767->iodev, reg, &val);
- val &= ~mask;
- val |= sel;
-
- ret = s5m_reg_write(s5m8767->iodev, reg, val);
- *selector = sel;
-
- return ret;
-}
-
-static inline void s5m8767_set_high(struct s5m8767_info *s5m8767)
-{
- int temp_index = s5m8767->buck_gpioindex;
-
- gpio_set_value(s5m8767->buck_gpios[0], (temp_index >> 2) & 0x1);
- gpio_set_value(s5m8767->buck_gpios[1], (temp_index >> 1) & 0x1);
- gpio_set_value(s5m8767->buck_gpios[2], temp_index & 0x1);
-}
-
-static inline void s5m8767_set_low(struct s5m8767_info *s5m8767)
-{
- int temp_index = s5m8767->buck_gpioindex;
-
- gpio_set_value(s5m8767->buck_gpios[2], temp_index & 0x1);
- gpio_set_value(s5m8767->buck_gpios[1], (temp_index >> 1) & 0x1);
- gpio_set_value(s5m8767->buck_gpios[0], (temp_index >> 2) & 0x1);
-}
-
-static int s5m8767_set_voltage_buck(struct regulator_dev *rdev,
- int min_uV, int max_uV, unsigned *selector)
-{
- struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
- int reg_id = rdev_get_id(rdev);
- const struct s5m_voltage_desc *desc;
- int new_val, old_val, i = 0;
-
- if (reg_id < S5M8767_BUCK1 || reg_id > S5M8767_BUCK6)
- return -EINVAL;
-
- switch (reg_id) {
- case S5M8767_BUCK1:
- return s5m8767_set_voltage(rdev, min_uV, max_uV, selector);
- case S5M8767_BUCK2 ... S5M8767_BUCK4:
- break;
- case S5M8767_BUCK5 ... S5M8767_BUCK6:
- return s5m8767_set_voltage(rdev, min_uV, max_uV, selector);
- case S5M8767_BUCK9:
- return s5m8767_set_voltage(rdev, min_uV, max_uV, selector);
- }
+ /* buck234_vol != NULL means to control buck234 voltage via DVS GPIO */
+ if (buck234_vol) {
+ while (*buck234_vol != sel) {
+ buck234_vol++;
+ index++;
+ }
+ old_index = s5m8767->buck_gpioindex;
+ s5m8767->buck_gpioindex = index;
+
+ if (index > old_index)
+ s5m8767_set_high(s5m8767);
+ else
+ s5m8767_set_low(s5m8767);
+ } else {
+ ret = s5m8767_get_voltage_register(rdev, ®);
+ if (ret)
+ return ret;
- desc = reg_voltage_map[reg_id];
- new_val = s5m8767_convert_voltage_to_sel(desc, min_uV, max_uV);
- if (new_val < 0)
- return new_val;
+ s5m_reg_read(s5m8767->iodev, reg, &val);
+ val = (val & ~mask) | sel;
- switch (reg_id) {
- case S5M8767_BUCK2:
- if (s5m8767->buck2_gpiodvs) {
- while (s5m8767->buck2_vol[i] != new_val)
- i++;
- } else
- return s5m8767_set_voltage(rdev, min_uV,
- max_uV, selector);
- break;
- case S5M8767_BUCK3:
- if (s5m8767->buck3_gpiodvs) {
- while (s5m8767->buck3_vol[i] != new_val)
- i++;
- } else
- return s5m8767_set_voltage(rdev, min_uV,
- max_uV, selector);
- break;
- case S5M8767_BUCK4:
- if (s5m8767->buck3_gpiodvs) {
- while (s5m8767->buck4_vol[i] != new_val)
- i++;
- } else
- return s5m8767_set_voltage(rdev, min_uV,
- max_uV, selector);
- break;
+ ret = s5m_reg_write(s5m8767->iodev, reg, val);
}
- old_val = s5m8767->buck_gpioindex;
- s5m8767->buck_gpioindex = i;
-
- if (i > old_val)
- s5m8767_set_high(s5m8767);
- else
- s5m8767_set_low(s5m8767);
-
- *selector = new_val;
- return 0;
+ *selector = sel;
+ return ret;
}
static int s5m8767_set_voltage_time_sel(struct regulator_dev *rdev,
@@ -466,7 +421,7 @@ static struct regulator_ops s5m8767_buck_ops = {
.enable = s5m8767_reg_enable,
.disable = s5m8767_reg_disable,
.get_voltage_sel = s5m8767_get_voltage_sel,
- .set_voltage = s5m8767_set_voltage_buck,
+ .set_voltage = s5m8767_set_voltage,
.set_voltage_time_sel = s5m8767_set_voltage_time_sel,
};
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists