| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1334200154.10759.1.camel@phoenix>
Date: Thu, 12 Apr 2012 11:09:14 +0800
From: Axel Lin <axel.lin@...il.com>
To: linux-kernel@...r.kernel.org
Cc: Samuel Ortiz <sameo@...ux.intel.com>,
Linus Walleij <linus.walleij@...aro.org>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>
Subject: [PATCH v2] mfd: Sort Kconfig entries for mfd drivers
Sort Kconfig entries by chip vendor name first, then driver name.
Having the Kconfig entries sorted makes it easier for users to find the
driver they want to enable.
This change also encourages new coming drivers to be put in proper location
rather than to be added at random location.
Signed-off-by: Axel Lin <axel.lin@...il.com>
---
v2: Remove the leading "Support " word in each entry.
This change makes it possible to jump to deserted entry quickly
when using make menuconfig.
Hi Samuel,
I generate this patch against linux-next 20120411.
If you think this patch is ok, pls apply this one and
ignore my previous patch "mfd: Move MFD_TPS65090 and
TPS65911_COMPARATOR Kconfig entries to proper location".
Regards,
Axel
drivers/mfd/Kconfig | 1256 +++++++++++++++++++++++++-------------------------
1 files changed, 628 insertions(+), 628 deletions(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 29f463c..31321b4 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -9,400 +9,171 @@ config MFD_CORE
tristate
default n
-config MFD_88PM860X
- bool "Support Marvell 88PM8606/88PM8607"
- depends on I2C=y && GENERIC_HARDIRQS
- select REGMAP_I2C
- select MFD_CORE
+config PMIC_ADP5520
+ bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
+ depends on I2C=y
help
- This supports for Marvell 88PM8606/88PM8607 Power Management IC.
- This includes the I2C driver and the core APIs _only_, you have to
- select individual components like voltage regulators, RTC and
- battery-charger under the corresponding menus.
-
-config MFD_SM501
- tristate "Support for Silicon Motion SM501"
- ---help---
- This is the core driver for the Silicon Motion SM501 multimedia
- companion chip. This device is a multifunction device which may
- provide numerous interfaces including USB host controller, USB gadget,
- asynchronous serial ports, audio functions, and a dual display video
- interface. The device may be connected by PCI or local bus with
- varying functions enabled.
+ Say yes here to add support for Analog Devices AD5520 and ADP5501,
+ Multifunction Power Management IC. This includes
+ the I2C driver and the core APIs _only_, you have to select
+ individual components like LCD backlight, LEDs, GPIOs and Kepad
+ under the corresponding menus.
-config MFD_SM501_GPIO
- bool "Export GPIO via GPIO layer"
- depends on MFD_SM501 && GPIOLIB
- ---help---
- This option uses the gpio library layer to export the 64 GPIO
- lines on the SM501. The platform data is used to supply the
- base number for the first GPIO line to register.
+config MFD_AAT2870_CORE
+ bool "AnalogicTech AAT2870"
+ select MFD_CORE
+ depends on I2C=y && GPIOLIB
+ help
+ If you say yes here you get support for the AAT2870.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
config MFD_ASIC3
- bool "Support for Compaq ASIC3"
+ bool "Compaq ASIC3"
depends on GENERIC_HARDIRQS && GPIOLIB && ARM
select MFD_CORE
---help---
This driver supports the ASIC3 multifunction chip found on many
PDAs (mainly iPAQ and HTC based ones)
-config MFD_DAVINCI_VOICECODEC
- tristate
- select MFD_CORE
-
-config MFD_DM355EVM_MSP
- bool "DaVinci DM355 EVM microcontroller"
- depends on I2C=y && MACH_DAVINCI_DM355_EVM
- help
- This driver supports the MSP430 microcontroller used on these
- boards. MSP430 firmware manages resets and power sequencing,
- inputs from buttons and the IR remote, LEDs, an RTC, and more.
-
-config MFD_TI_SSP
- tristate "TI Sequencer Serial Port support"
- depends on ARCH_DAVINCI_TNETV107X
- select MFD_CORE
- ---help---
- Say Y here if you want support for the Sequencer Serial Port
- in a Texas Instruments TNETV107X SoC.
-
- To compile this driver as a module, choose M here: the
- module will be called ti-ssp.
-
-config HTC_EGPIO
- bool "HTC EGPIO support"
- depends on GENERIC_HARDIRQS && GPIOLIB && ARM
- help
- This driver supports the CPLD egpio chip present on
- several HTC phones. It provides basic support for input
- pins, output pins, and irqs.
-
-config HTC_PASIC3
- tristate "HTC PASIC3 LED/DS1WM chip support"
- select MFD_CORE
- help
- This core driver provides register access for the LED/DS1WM
- chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
- HTC Magician devices, respectively. Actual functionality is
- handled by the leds-pasic3 and ds1wm drivers.
-
-config HTC_I2CPLD
- bool "HTC I2C PLD chip support"
- depends on I2C=y && GPIOLIB
- help
- If you say yes here you get support for the supposed CPLD
- found on omap850 HTC devices like the HTC Wizard and HTC Herald.
- This device provides input and output GPIOs through an I2C
- interface to one or more sub-chips.
-
-config UCB1400_CORE
- tristate "Philips UCB1400 Core driver"
- depends on AC97_BUS
- depends on GPIOLIB
+config PMIC_DA903X
+ bool "Dialog Semiconductor DA9030/DA9034 PMIC"
+ depends on I2C=y
help
- This enables support for the Philips UCB1400 core functions.
- The UCB1400 is an AC97 audio codec.
-
- To compile this driver as a module, choose M here: the
- module will be called ucb1400_core.
+ Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
+ ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
+ usually found on PXA processors-based platforms. This includes
+ the I2C driver and the core APIs _only_, you have to select
+ individual components like LCD backlight, voltage regulators,
+ LEDs and battery-charger under the corresponding menus.
-config TPS6105X
- tristate "TPS61050/61052 Boost Converters"
- depends on I2C
- select REGULATOR
+config PMIC_DA9052
+ bool
select MFD_CORE
- select REGULATOR_FIXED_VOLTAGE
- help
- This option enables a driver for the TP61050/TPS61052
- high-power "white LED driver". This boost converter is
- sometimes used for other things than white LEDs, and
- also contains a GPIO pin.
-config TPS65010
- tristate "TPS6501x Power Management chips"
- depends on I2C && GPIOLIB
- default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
+config MFD_DA9052_SPI
+ bool "Dialog Semiconductor DA9052/53 PMIC variants with SPI"
+ select REGMAP_SPI
+ select REGMAP_IRQ
+ select PMIC_DA9052
+ depends on SPI_MASTER=y
help
- If you say yes here you get support for the TPS6501x series of
- Power Management chips. These include voltage regulators,
- lithium ion/polymer battery charging, and other features that
- are often used in portable devices like cell phones and cameras.
-
- This driver can also be built as a module. If so, the module
- will be called tps65010.
+ Support for the Dialog Semiconductor DA9052 PMIC
+ when controlled using SPI. This driver provides common support
+ for accessing the device, additional drivers must be enabled in
+ order to use the functionality of the device.
-config TPS6507X
- tristate "TPS6507x Power Management / Touch Screen chips"
- select MFD_CORE
- depends on I2C
+config MFD_DA9052_I2C
+ bool "Dialog Semiconductor DA9052/53 PMIC variants with I2C"
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ select PMIC_DA9052
+ depends on I2C=y
help
- If you say yes here you get support for the TPS6507x series of
- Power Management / Touch Screen chips. These include voltage
- regulators, lithium ion/polymer battery charging, touch screen
- and other features that are often used in portable devices.
- This driver can also be built as a module. If so, the module
- will be called tps6507x.
+ Support for the Dialog Semiconductor DA9052 PMIC
+ when controlled using I2C. This driver provides common support
+ for accessing the device, additional drivers must be enabled in
+ order to use the functionality of the device.
-config MFD_TPS65217
- tristate "TPS65217 Power Management / White LED chips"
- depends on I2C
- select MFD_CORE
- select REGMAP_I2C
+config MFD_ANATOP
+ bool "Freescale i.MX on-chip ANATOP controller"
+ depends on SOC_IMX6Q
help
- If you say yes here you get support for the TPS65217 series of
- Power Management / White LED chips.
- These include voltage regulators, lithium ion/polymer battery
- charger, wled and other features that are often used in portable
- devices.
+ Select this option to enable Freescale i.MX on-chip ANATOP
+ MFD controller. This controller embeds regulator and
+ thermal devices for Freescale i.MX platforms.
- This driver can also be built as a module. If so, the module
- will be called tps65217.
+config MFD_MC13783
+ tristate
-config MFD_TPS6586X
- bool "TPS6586x Power Management chips"
- depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
+config MFD_MC13XXX
+ tristate "Freescale MC13783 and MC13892"
+ depends on SPI_MASTER
select MFD_CORE
+ select MFD_MC13783
help
- If you say yes here you get support for the TPS6586X series of
- Power Management chips.
- This driver provides common support for accessing the device,
+ Support for the Freescale (Atlas) PMIC and audio CODECs
+ MC13783 and MC13892.
+ This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the
functionality of the device.
- This driver can also be built as a module. If so, the module
- will be called tps6586x.
-
-config MFD_TPS65910
- bool "TPS65910 Power Management chip"
- depends on I2C=y && GPIOLIB
- select MFD_CORE
- select GPIO_TPS65910
- select REGMAP_I2C
+config HTC_EGPIO
+ bool "HTC EGPIO"
+ depends on GENERIC_HARDIRQS && GPIOLIB && ARM
help
- if you say yes here you get support for the TPS65910 series of
- Power Management chips.
-
-config MFD_TPS65912
- bool
- depends on GPIOLIB
+ This driver supports the CPLD egpio chip present on
+ several HTC phones. It provides basic support for input
+ pins, output pins, and irqs.
-config MFD_TPS65912_I2C
- bool "TPS65912 Power Management chip with I2C"
- select MFD_CORE
- select MFD_TPS65912
+config HTC_I2CPLD
+ bool "HTC I2C PLD chip"
depends on I2C=y && GPIOLIB
help
- If you say yes here you get support for the TPS65912 series of
- PM chips with I2C interface.
-
-config MFD_TPS65912_SPI
- bool "TPS65912 Power Management chip with SPI"
- select MFD_CORE
- select MFD_TPS65912
- depends on SPI_MASTER && GPIOLIB
- help
- If you say yes here you get support for the TPS65912 series of
- PM chips with SPI interface.
-
-config MENELAUS
- bool "Texas Instruments TWL92330/Menelaus PM chip"
- depends on I2C=y && ARCH_OMAP2
- help
- If you say yes here you get support for the Texas Instruments
- TWL92330/Menelaus Power Management chip. This include voltage
- regulators, Dual slot memory card transceivers, real-time clock
- and other features that are often used in portable devices like
- cell phones and PDAs.
-
-config TWL4030_CORE
- bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
- depends on I2C=y && GENERIC_HARDIRQS
- select IRQ_DOMAIN
- help
- Say yes here if you have TWL4030 / TWL6030 family chip on your board.
- This core driver provides register access and IRQ handling
- facilities, and registers devices for the various functions
- so that function-specific drivers can bind to them.
-
- These multi-function chips are found on many OMAP2 and OMAP3
- boards, providing power management, RTC, GPIO, keypad, a
- high speed USB OTG transceiver, an audio codec (on most
- versions) and many other features.
-
-config TWL4030_MADC
- tristate "Texas Instruments TWL4030 MADC"
- depends on TWL4030_CORE
- help
- This driver provides support for triton TWL4030-MADC. The
- driver supports both RT and SW conversion methods.
-
- This driver can be built as a module. If so it will be
- named twl4030-madc
-
-config TWL4030_POWER
- bool "Support power resources on TWL4030 family chips"
- depends on TWL4030_CORE && ARM
- help
- Say yes here if you want to use the power resources on the
- TWL4030 family chips. Most of these resources are regulators,
- which have a separate driver; some are control signals, such
- as clock request handshaking.
-
- This driver uses board-specific data to initialize the resources
- and load scripts controlling which resources are switched off/on
- or reset when a sleep, wakeup or warm reset event occurs.
-
-config MFD_TWL4030_AUDIO
- bool
- depends on TWL4030_CORE
- select MFD_CORE
- default n
-
-config TWL6030_PWM
- tristate "TWL6030 PWM (Pulse Width Modulator) Support"
- depends on TWL4030_CORE
- select HAVE_PWM
- default n
- help
- Say yes here if you want support for TWL6030 PWM.
- This is used to control charging LED brightness.
-
-config TWL6040_CORE
- bool
- depends on TWL4030_CORE && GENERIC_HARDIRQS
- select MFD_CORE
- default n
-
-config MFD_STMPE
- bool "Support STMicroelectronics STMPE"
- depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS
- select MFD_CORE
- help
- Support for the STMPE family of I/O Expanders from
- STMicroelectronics.
-
- Currently supported devices are:
-
- STMPE811: GPIO, Touchscreen
- STMPE1601: GPIO, Keypad
- STMPE2401: GPIO, Keypad
- STMPE2403: GPIO, Keypad
-
- This driver provides common support for accessing the device,
- additional drivers must be enabled in order to use the functionality
- of the device. Currently available sub drivers are:
-
- GPIO: stmpe-gpio
- Keypad: stmpe-keypad
- Touchscreen: stmpe-ts
-
-menu "STMPE Interface Drivers"
-depends on MFD_STMPE
-
-config STMPE_I2C
- bool "STMPE I2C Inteface"
- depends on I2C=y
- default y
- help
- This is used to enable I2C interface of STMPE
-
-config STMPE_SPI
- bool "STMPE SPI Inteface"
- depends on SPI_MASTER
- help
- This is used to enable SPI interface of STMPE
-endmenu
-
-config MFD_TC3589X
- bool "Support Toshiba TC35892 and variants"
- depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
- help
- Support for the Toshiba TC35892 and variants I/O Expander.
-
- This driver provides common support for accessing the device,
- additional drivers must be enabled in order to use the
- functionality of the device.
-
-config MFD_TMIO
- bool
- default n
+ If you say yes here you get support for the supposed CPLD
+ found on omap850 HTC devices like the HTC Wizard and HTC Herald.
+ This device provides input and output GPIOs through an I2C
+ interface to one or more sub-chips.
-config MFD_T7L66XB
- bool "Support Toshiba T7L66XB"
- depends on ARM && HAVE_CLK
+config HTC_PASIC3
+ tristate "HTC PASIC3 LED/DS1WM chip"
select MFD_CORE
- select MFD_TMIO
help
- Support for Toshiba Mobile IO Controller T7L66XB
+ This core driver provides register access for the LED/DS1WM
+ chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
+ HTC Magician devices, respectively. Actual functionality is
+ handled by the leds-pasic3 and ds1wm drivers.
-config MFD_TC6387XB
- bool "Support Toshiba TC6387XB"
- depends on ARM && HAVE_CLK
+config MFD_JZ4740_ADC
+ bool "Ingenic Semiconductor JZ4740 SoC ADC core"
select MFD_CORE
- select MFD_TMIO
+ select GENERIC_IRQ_CHIP
+ depends on MACH_JZ4740
help
- Support for Toshiba Mobile IO Controller TC6387XB
+ Say yes here if you want support for the ADC unit in the JZ4740 SoC.
+ This driver is necessary for jz4740-battery and jz4740-hwmon driver.
-config MFD_TC6393XB
- bool "Support Toshiba TC6393XB"
- depends on GPIOLIB && ARM && HAVE_CLK
+config MFD_INTEL_MSIC
+ bool "Intel MSIC"
+ depends on INTEL_SCU_IPC
select MFD_CORE
- select MFD_TMIO
- help
- Support for Toshiba Mobile IO Controller TC6393XB
-
-config PMIC_DA903X
- bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
- depends on I2C=y
help
- Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
- ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
- usually found on PXA processors-based platforms. This includes
- the I2C driver and the core APIs _only_, you have to select
- individual components like LCD backlight, voltage regulators,
- LEDs and battery-charger under the corresponding menus.
+ Select this option to enable access to Intel MSIC (Avatele
+ Passage) chip. This chip embeds audio, battery, GPIO, etc.
+ devices used in Intel Medfield platforms.
-config PMIC_DA9052
- bool
+config LPC_SCH
+ tristate "Intel SCH LPC"
+ depends on PCI
select MFD_CORE
-
-config MFD_DA9052_SPI
- bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI"
- select REGMAP_SPI
- select REGMAP_IRQ
- select PMIC_DA9052
- depends on SPI_MASTER=y
help
- Support for the Dialog Semiconductor DA9052 PMIC
- when controlled using SPI. This driver provides common support
- for accessing the device, additional drivers must be enabled in
- order to use the functionality of the device.
+ LPC bridge function of the Intel SCH provides support for
+ System Management Bus and General Purpose I/O.
-config MFD_DA9052_I2C
- bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C"
- select REGMAP_I2C
- select REGMAP_IRQ
- select PMIC_DA9052
- depends on I2C=y
+config MFD_JANZ_CMODIO
+ tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
+ select MFD_CORE
+ depends on PCI
help
- Support for the Dialog Semiconductor DA9052 PMIC
- when controlled using I2C. This driver provides common support
- for accessing the device, additional drivers must be enabled in
- order to use the functionality of the device.
+ This is the core driver for the Janz CMOD-IO PCI MODULbus
+ carrier board. This device is a PCI to MODULbus bridge which may
+ host many different types of MODULbus daughterboards, including
+ CAN and GPIO controllers.
-config PMIC_ADP5520
- bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
- depends on I2C=y
+config MFD_88PM860X
+ bool "Marvell 88PM8606/88PM8607"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select REGMAP_I2C
+ select MFD_CORE
help
- Say yes here to add support for Analog Devices AD5520 and ADP5501,
- Multifunction Power Management IC. This includes
- the I2C driver and the core APIs _only_, you have to select
- individual components like LCD backlight, LEDs, GPIOs and Kepad
- under the corresponding menus.
+ This supports for Marvell 88PM8606/88PM8607 Power Management IC.
+ This includes the I2C driver and the core APIs _only_, you have to
+ select individual components like voltage regulators, RTC and
+ battery-charger under the corresponding menus.
config MFD_MAX8925
- bool "Maxim Semiconductor MAX8925 PMIC Support"
+ bool "Maxim Semiconductor MAX8925 PMIC"
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
help
@@ -412,7 +183,7 @@ config MFD_MAX8925
to use the functionality of the device.
config MFD_MAX8997
- bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
+ bool "Maxim Semiconductor MAX8997/8966 PMIC"
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
help
@@ -424,7 +195,7 @@ config MFD_MAX8997
of the device.
config MFD_MAX8998
- bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
+ bool "Maxim Semiconductor MAX8998/National LP3974 PMIC"
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
help
@@ -434,135 +205,23 @@ config MFD_MAX8998
additional drivers must be enabled in order to use the functionality
of the device.
-config MFD_S5M_CORE
- bool "SAMSUNG S5M Series Support"
- depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
- select REGMAP_I2C
- help
- Support for the Samsung Electronics S5M MFD series.
- This driver provies common support for accessing the device,
- additional drivers must be enabled in order to use the functionality
- of the device
-
-config MFD_WM8400
- tristate "Support Wolfson Microelectronics WM8400"
- select MFD_CORE
- depends on I2C
- select REGMAP_I2C
- help
- Support for the Wolfson Microelecronics WM8400 PMIC and audio
- CODEC. This driver provides common support for accessing
- the device, additional drivers must be enabled in order to use
- the functionality of the device.
-
-config MFD_WM831X
- bool
- depends on GENERIC_HARDIRQS
-
-config MFD_WM831X_I2C
- bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C"
- select MFD_CORE
- select MFD_WM831X
- select REGMAP_I2C
- depends on I2C=y && GENERIC_HARDIRQS
- help
- Support for the Wolfson Microelecronics WM831x and WM832x PMICs
- when controlled using I2C. This driver provides common support
- for accessing the device, additional drivers must be enabled in
- order to use the functionality of the device.
-
-config MFD_WM831X_SPI
- bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI"
- select MFD_CORE
- select MFD_WM831X
- select REGMAP_SPI
- depends on SPI_MASTER && GENERIC_HARDIRQS
- help
- Support for the Wolfson Microelecronics WM831x and WM832x PMICs
- when controlled using SPI. This driver provides common support
- for accessing the device, additional drivers must be enabled in
- order to use the functionality of the device.
-
-config MFD_WM8350
- bool
- depends on GENERIC_HARDIRQS
-
-config MFD_WM8350_CONFIG_MODE_0
- bool
- depends on MFD_WM8350
-
-config MFD_WM8350_CONFIG_MODE_1
- bool
- depends on MFD_WM8350
-
-config MFD_WM8350_CONFIG_MODE_2
- bool
- depends on MFD_WM8350
-
-config MFD_WM8350_CONFIG_MODE_3
- bool
- depends on MFD_WM8350
-
-config MFD_WM8351_CONFIG_MODE_0
- bool
- depends on MFD_WM8350
-
-config MFD_WM8351_CONFIG_MODE_1
- bool
- depends on MFD_WM8350
-
-config MFD_WM8351_CONFIG_MODE_2
- bool
- depends on MFD_WM8350
-
-config MFD_WM8351_CONFIG_MODE_3
- bool
- depends on MFD_WM8350
-
-config MFD_WM8352_CONFIG_MODE_0
- bool
- depends on MFD_WM8350
-
-config MFD_WM8352_CONFIG_MODE_1
- bool
- depends on MFD_WM8350
-
-config MFD_WM8352_CONFIG_MODE_2
- bool
- depends on MFD_WM8350
-
-config MFD_WM8352_CONFIG_MODE_3
- bool
- depends on MFD_WM8350
-
-config MFD_WM8350_I2C
- bool "Support Wolfson Microelectronics WM8350 with I2C"
- select MFD_WM8350
- depends on I2C=y && GENERIC_HARDIRQS
+config EZX_PCAP
+ bool "Motorola PCAP"
+ depends on GENERIC_HARDIRQS && SPI_MASTER
help
- The WM8350 is an integrated audio and power management
- subsystem with watchdog and RTC functionality for embedded
- systems. This option enables core support for the WM8350 with
- I2C as the control interface. Additional options must be
- selected to enable support for the functionality of the chip.
+ This enables the PCAP ASIC present on EZX Phones. This is
+ needed for MMC, TouchScreen, Sound, USB, etc..
-config MFD_WM8994
- bool "Support Wolfson Microelectronics WM8994"
+config MFD_CS5535
+ tristate "NS CS5535 and AMD CS5536 southbridge core functions"
select MFD_CORE
- select REGMAP_I2C
- select REGMAP_IRQ
- depends on I2C=y && GENERIC_HARDIRQS
- help
- The WM8994 is a highly integrated hi-fi CODEC designed for
- smartphone applicatiosn. As well as audio functionality it
- has on board GPIO and regulator functionality which is
- supported via the relevant subsystems. This driver provides
- core support for the WM8994, in order to use the actual
- functionaltiy of the device other drivers must be enabled.
+ depends on PCI && X86
+ ---help---
+ This is the core driver for CS5535/CS5536 MFD functions. This is
+ necessary for using the board's GPIO and MFGPT functionality.
config MFD_PCF50633
- tristate "Support for NXP PCF50633"
+ tristate "NXP PCF50633"
depends on I2C
select REGMAP_I2C
help
@@ -572,43 +231,109 @@ config MFD_PCF50633
so that function-specific drivers can bind to them.
config PCF50633_ADC
- tristate "Support for NXP PCF50633 ADC"
+ tristate "NXP PCF50633 ADC"
depends on MFD_PCF50633
help
Say yes here if you want to include support for ADC in the
NXP PCF50633 chip.
config PCF50633_GPIO
- tristate "Support for NXP PCF50633 GPIO"
+ tristate "NXP PCF50633 GPIO"
depends on MFD_PCF50633
help
Say yes here if you want to include support GPIO for pins on
the PCF50633 chip.
-config MFD_MC13783
+config UCB1400_CORE
+ tristate "Philips UCB1400 Core driver"
+ depends on AC97_BUS
+ depends on GPIOLIB
+ help
+ This enables support for the Philips UCB1400 core functions.
+ The UCB1400 is an AC97 audio codec.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ucb1400_core.
+
+config MFD_PM8XXX
tristate
-config MFD_MC13XXX
- tristate "Support Freescale MC13783 and MC13892"
- depends on SPI_MASTER
+config MFD_PM8921_CORE
+ tristate "Qualcomm PM8921 PMIC chip"
+ depends on MSM_SSBI
select MFD_CORE
- select MFD_MC13783
+ select MFD_PM8XXX
help
- Support for the Freescale (Atlas) PMIC and audio CODECs
- MC13783 and MC13892.
- This driver provides common support for accessing the device,
- additional drivers must be enabled in order to use the
- functionality of the device.
+ If you say yes to this option, support will be included for the
+ built-in PM8921 PMIC chip.
-config ABX500_CORE
- bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
- default y if ARCH_U300 || ARCH_U8500
+ This is required if your board has a PM8921 and uses its features,
+ such as: MPPs, GPIOs, regulators, interrupts, and PWM.
+
+ Say M here if you want to include support for PM8921 chip as a module.
+ This will build a module called "pm8921-core".
+
+config MFD_PM8XXX_IRQ
+ bool "Qualcomm PM8xxx IRQ features"
+ depends on MFD_PM8XXX
+ default y if MFD_PM8XXX
help
- Say yes here if you have the ABX500 Mixed Signal IC family
- chips. This core driver expose register access functions.
- Functionality specific drivers using these functions can
- remain unchanged when IC changes. Binding of the functions to
- actual register access is done by the IC core driver.
+ This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
+
+ This is required to use certain other PM 8xxx features, such as GPIO
+ and MPP.
+
+config MFD_RDC321X
+ tristate "RDC R321x southbridge"
+ select MFD_CORE
+ depends on PCI
+ help
+ Say yes here if you want to have support for the RDC R-321x SoC
+ southbridge which provides access to GPIOs and Watchdog using the
+ southbridge PCI device configuration space.
+
+config MFD_RC5T583
+ bool "Ricoh RC5T583 Power Management system device"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ Select this option to get support for the RICOH583 Power
+ Management system device.
+ This driver provides common support for accessing the device
+ through i2c interface. The device supports multiple sub-devices
+ like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
+ Additional drivers must be enabled in order to use the
+ different functionality of the device.
+
+config MFD_S5M_CORE
+ bool "SAMSUNG S5M Series Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ Support for the Samsung Electronics S5M MFD series.
+ This driver provies common support for accessing the device,
+ additional drivers must be enabled in order to use the functionality
+ of the device
+
+config MFD_SM501
+ tristate "Silicon Motion SM501"
+ ---help---
+ This is the core driver for the Silicon Motion SM501 multimedia
+ companion chip. This device is a multifunction device which may
+ provide numerous interfaces including USB host controller, USB gadget,
+ asynchronous serial ports, audio functions, and a dual display video
+ interface. The device may be connected by PCI or local bus with
+ varying functions enabled.
+
+config MFD_SM501_GPIO
+ bool "Export GPIO via GPIO layer"
+ depends on MFD_SM501 && GPIOLIB
+ ---help---
+ This option uses the gpio library layer to export the 64 GPIO
+ lines on the SM501. The platform data is used to supply the
+ base number for the first GPIO line to register.
config AB3100_CORE
bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
@@ -634,13 +359,6 @@ config AB3100_OTP
programmable memory) support. This exposes a sysfs file to read
out OTP values.
-config EZX_PCAP
- bool "PCAP Support"
- depends on GENERIC_HARDIRQS && SPI_MASTER
- help
- This enables the PCAP ASIC present on EZX Phones. This is
- needed for MMC, TouchScreen, Sound, USB, etc..
-
config AB5500_CORE
bool "ST-Ericsson AB5500 Mixed Signal Power Management chip"
depends on ABX500_CORE && MFD_DB5500_PRCMU
@@ -670,7 +388,7 @@ config AB8500_CORE
This chip embeds various other multimedia funtionalities as well.
config AB8500_I2C_CORE
- bool "AB8500 register access via PRCMU I2C"
+ bool "ST-Ericsson AB8500 register access via PRCMU I2C"
depends on AB8500_CORE && MFD_DB8500_PRCMU
default y
help
@@ -688,42 +406,308 @@ config AB8500_DEBUG
filesystem, debugfs.
config AB8500_GPADC
- bool "AB8500 GPADC driver"
+ bool "ST-Ericsson AB8500 GPADC driver"
depends on AB8500_CORE && REGULATOR_AB8500
default y
help
AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
-config MFD_DB8500_PRCMU
- bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
- depends on UX500_SOC_DB8500
+config ABX500_CORE
+ bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
+ default y if ARCH_U300 || ARCH_U8500
+ help
+ Say yes here if you have the ABX500 Mixed Signal IC family
+ chips. This core driver expose register access functions.
+ Functionality specific drivers using these functions can
+ remain unchanged when IC changes. Binding of the functions to
+ actual register access is done by the IC core driver.
+
+config MFD_DB5500_PRCMU
+ bool "ST-Ericsson DB5500 Power Reset Control Management Unit"
+ depends on UX500_SOC_DB5500
+ select MFD_CORE
+ help
+ Select this option to enable support for the DB5500 Power Reset
+ and Control Management Unit. This is basically an autonomous
+ system controller running an XP70 microprocessor, which is accessed
+ through a register map.
+
+config MFD_DB8500_PRCMU
+ bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
+ depends on UX500_SOC_DB8500
+ select MFD_CORE
+ help
+ Select this option to enable support for the DB8500 Power Reset
+ and Control Management Unit. This is basically an autonomous
+ system controller running an XP70 microprocessor, which is accessed
+ through a register map.
+
+config MFD_STMPE
+ bool "STMicroelectronics STMPE"
+ depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS
+ select MFD_CORE
+ help
+ Support for the STMPE family of I/O Expanders from
+ STMicroelectronics.
+
+ Currently supported devices are:
+
+ STMPE811: GPIO, Touchscreen
+ STMPE1601: GPIO, Keypad
+ STMPE2401: GPIO, Keypad
+ STMPE2403: GPIO, Keypad
+
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the functionality
+ of the device. Currently available sub drivers are:
+
+ GPIO: stmpe-gpio
+ Keypad: stmpe-keypad
+ Touchscreen: stmpe-ts
+
+menu "STMPE Interface Drivers"
+depends on MFD_STMPE
+
+config STMPE_I2C
+ bool "STMPE I2C Inteface"
+ depends on I2C=y
+ default y
+ help
+ This is used to enable I2C interface of STMPE
+
+config STMPE_SPI
+ bool "STMPE SPI Inteface"
+ depends on SPI_MASTER
+ help
+ This is used to enable SPI interface of STMPE
+endmenu
+
+config MFD_DAVINCI_VOICECODEC
+ tristate
+ select MFD_CORE
+
+config MFD_DM355EVM_MSP
+ bool "TI DaVinci DM355 EVM microcontroller"
+ depends on I2C=y && MACH_DAVINCI_DM355_EVM
+ help
+ This driver supports the MSP430 microcontroller used on these
+ boards. MSP430 firmware manages resets and power sequencing,
+ inputs from buttons and the IR remote, LEDs, an RTC, and more.
+
+config MFD_TI_SSP
+ tristate "TI Sequencer Serial Port"
+ depends on ARCH_DAVINCI_TNETV107X
+ select MFD_CORE
+ ---help---
+ Say Y here if you want support for the Sequencer Serial Port
+ in a Texas Instruments TNETV107X SoC.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ti-ssp.
+
+config MFD_OMAP_USB_HOST
+ bool "TI OMAP USBHS core driver"
+ depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
+ default y
+ help
+ This is the core driver for the OAMP EHCI and OHCI drivers.
+ This MFD driver does the required setup functionalities for
+ OMAP USB Host drivers.
+
+config TPS6105X
+ tristate "TI TPS61050/61052 Boost Converters"
+ depends on I2C
+ select REGULATOR
+ select MFD_CORE
+ select REGULATOR_FIXED_VOLTAGE
+ help
+ This option enables a driver for the TP61050/TPS61052
+ high-power "white LED driver". This boost converter is
+ sometimes used for other things than white LEDs, and
+ also contains a GPIO pin.
+
+config TPS65010
+ tristate "TI TPS6501x Power Management chips"
+ depends on I2C && GPIOLIB
+ default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
+ help
+ If you say yes here you get support for the TPS6501x series of
+ Power Management chips. These include voltage regulators,
+ lithium ion/polymer battery charging, and other features that
+ are often used in portable devices like cell phones and cameras.
+
+ This driver can also be built as a module. If so, the module
+ will be called tps65010.
+
+config TPS6507X
+ tristate "TI TPS6507x Power Management / Touch Screen chips"
+ select MFD_CORE
+ depends on I2C
+ help
+ If you say yes here you get support for the TPS6507x series of
+ Power Management / Touch Screen chips. These include voltage
+ regulators, lithium ion/polymer battery charging, touch screen
+ and other features that are often used in portable devices.
+ This driver can also be built as a module. If so, the module
+ will be called tps6507x.
+
+config MFD_TPS65090
+ bool "TI TPS65090 Power Management chips"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ If you say yes here you get support for the TPS65090 series of
+ Power Management chips.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
+
+config MFD_TPS65217
+ tristate "TI TPS65217 Power Management / White LED chips"
+ depends on I2C
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ If you say yes here you get support for the TPS65217 series of
+ Power Management / White LED chips.
+ These include voltage regulators, lithium ion/polymer battery
+ charger, wled and other features that are often used in portable
+ devices.
+
+ This driver can also be built as a module. If so, the module
+ will be called tps65217.
+
+config MFD_TPS6586X
+ bool "TI TPS6586x Power Management chips"
+ depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
+ select MFD_CORE
+ help
+ If you say yes here you get support for the TPS6586X series of
+ Power Management chips.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
+
+ This driver can also be built as a module. If so, the module
+ will be called tps6586x.
+
+config MFD_TPS65910
+ bool "TI TPS65910 Power Management chip"
+ depends on I2C=y && GPIOLIB
+ select MFD_CORE
+ select GPIO_TPS65910
+ select REGMAP_I2C
+ help
+ if you say yes here you get support for the TPS65910 series of
+ Power Management chips.
+
+config TPS65911_COMPARATOR
+ tristate
+
+config MFD_TPS65912
+ bool
+ depends on GPIOLIB
+
+config MFD_TPS65912_I2C
+ bool "TI TPS65912 Power Management chip with I2C"
+ select MFD_CORE
+ select MFD_TPS65912
+ depends on I2C=y && GPIOLIB
+ help
+ If you say yes here you get support for the TPS65912 series of
+ PM chips with I2C interface.
+
+config MFD_TPS65912_SPI
+ bool "TI TPS65912 Power Management chip with SPI"
+ select MFD_CORE
+ select MFD_TPS65912
+ depends on SPI_MASTER && GPIOLIB
+ help
+ If you say yes here you get support for the TPS65912 series of
+ PM chips with SPI interface.
+
+config TWL4030_CORE
+ bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select IRQ_DOMAIN
+ help
+ Say yes here if you have TWL4030 / TWL6030 family chip on your board.
+ This core driver provides register access and IRQ handling
+ facilities, and registers devices for the various functions
+ so that function-specific drivers can bind to them.
+
+ These multi-function chips are found on many OMAP2 and OMAP3
+ boards, providing power management, RTC, GPIO, keypad, a
+ high speed USB OTG transceiver, an audio codec (on most
+ versions) and many other features.
+
+config TWL4030_MADC
+ tristate "TI TWL4030 MADC"
+ depends on TWL4030_CORE
+ help
+ This driver provides support for triton TWL4030-MADC. The
+ driver supports both RT and SW conversion methods.
+
+ This driver can be built as a module. If so it will be
+ named twl4030-madc
+
+config TWL4030_POWER
+ bool "TI TWL4030 family chips power resources feature"
+ depends on TWL4030_CORE && ARM
+ help
+ Say yes here if you want to use the power resources on the
+ TWL4030 family chips. Most of these resources are regulators,
+ which have a separate driver; some are control signals, such
+ as clock request handshaking.
+
+ This driver uses board-specific data to initialize the resources
+ and load scripts controlling which resources are switched off/on
+ or reset when a sleep, wakeup or warm reset event occurs.
+
+config MFD_TWL4030_AUDIO
+ bool
+ depends on TWL4030_CORE
select MFD_CORE
+ default n
+
+config TWL6030_PWM
+ tristate "TI TWL6030 PWM (Pulse Width Modulator)"
+ depends on TWL4030_CORE
+ select HAVE_PWM
+ default n
help
- Select this option to enable support for the DB8500 Power Reset
- and Control Management Unit. This is basically an autonomous
- system controller running an XP70 microprocessor, which is accessed
- through a register map.
+ Say yes here if you want support for TWL6030 PWM.
+ This is used to control charging LED brightness.
-config MFD_DB5500_PRCMU
- bool "ST-Ericsson DB5500 Power Reset Control Management Unit"
- depends on UX500_SOC_DB5500
+config TWL6040_CORE
+ bool
+ depends on TWL4030_CORE && GENERIC_HARDIRQS
select MFD_CORE
+ default n
+
+config MENELAUS
+ bool "TI TWL92330/Menelaus PM chip"
+ depends on I2C=y && ARCH_OMAP2
help
- Select this option to enable support for the DB5500 Power Reset
- and Control Management Unit. This is basically an autonomous
- system controller running an XP70 microprocessor, which is accessed
- through a register map.
+ If you say yes here you get support for the Texas Instruments
+ TWL92330/Menelaus Power Management chip. This include voltage
+ regulators, Dual slot memory card transceivers, real-time clock
+ and other features that are often used in portable devices like
+ cell phones and PDAs.
-config MFD_CS5535
- tristate "Support for CS5535 and CS5536 southbridge core functions"
+config MFD_WL1273_CORE
+ tristate "TI WL1273 FM radio."
+ depends on I2C
select MFD_CORE
- depends on PCI && X86
- ---help---
- This is the core driver for CS5535/CS5536 MFD functions. This is
- necessary for using the board's GPIO and MFGPT functionality.
+ default n
+ help
+ This is the core driver for the TI WL1273 FM radio. This MFD
+ driver connects the radio-wl1273 V4L2 module and the wl1273
+ audio codec.
config MFD_TIMBERDALE
- tristate "Support for the Timberdale FPGA"
+ tristate "Timberdale FPGA"
select MFD_CORE
depends on PCI && GPIOLIB
---help---
@@ -733,44 +717,47 @@ config MFD_TIMBERDALE
The timberdale FPGA can be found on the Intel Atom development board
for in-vehicle infontainment, called Russellville.
-config LPC_SCH
- tristate "Intel SCH LPC"
- depends on PCI
+config MFD_TMIO
+ bool
+ default n
+
+config MFD_T7L66XB
+ bool "Toshiba T7L66XB"
+ depends on ARM && HAVE_CLK
select MFD_CORE
+ select MFD_TMIO
help
- LPC bridge function of the Intel SCH provides support for
- System Management Bus and General Purpose I/O.
+ Support for Toshiba Mobile IO Controller T7L66XB
-config MFD_RDC321X
- tristate "Support for RDC-R321x southbridge"
+config MFD_TC3589X
+ bool "Toshiba TC35892 and variants"
+ depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
- depends on PCI
help
- Say yes here if you want to have support for the RDC R-321x SoC
- southbridge which provides access to GPIOs and Watchdog using the
- southbridge PCI device configuration space.
+ Support for the Toshiba TC35892 and variants I/O Expander.
-config MFD_JANZ_CMODIO
- tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
+
+config MFD_TC6387XB
+ bool "Toshiba TC6387XB"
+ depends on ARM && HAVE_CLK
select MFD_CORE
- depends on PCI
+ select MFD_TMIO
help
- This is the core driver for the Janz CMOD-IO PCI MODULbus
- carrier board. This device is a PCI to MODULbus bridge which may
- host many different types of MODULbus daughterboards, including
- CAN and GPIO controllers.
+ Support for Toshiba Mobile IO Controller TC6387XB
-config MFD_JZ4740_ADC
- bool "Support for the JZ4740 SoC ADC core"
+config MFD_TC6393XB
+ bool "Toshiba TC6393XB"
+ depends on GPIOLIB && ARM && HAVE_CLK
select MFD_CORE
- select GENERIC_IRQ_CHIP
- depends on MACH_JZ4740
+ select MFD_TMIO
help
- Say yes here if you want support for the ADC unit in the JZ4740 SoC.
- This driver is necessary for jz4740-battery and jz4740-hwmon driver.
+ Support for Toshiba Mobile IO Controller TC6393XB
config MFD_VX855
- tristate "Support for VIA VX855/VX875 integrated south bridge"
+ tristate "VIA VX855/VX875 integrated south bridge"
depends on PCI
select MFD_CORE
help
@@ -778,108 +765,121 @@ config MFD_VX855
VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
and/or vx855_gpio drivers for this to do anything useful.
-config MFD_WL1273_CORE
- tristate "Support for TI WL1273 FM radio."
- depends on I2C
+config MFD_WM831X
+ bool
+ depends on GENERIC_HARDIRQS
+
+config MFD_WM831X_I2C
+ bool "Wolfson Microelectronics WM831x/2x PMICs with I2C"
select MFD_CORE
- default n
+ select MFD_WM831X
+ select REGMAP_I2C
+ depends on I2C=y && GENERIC_HARDIRQS
help
- This is the core driver for the TI WL1273 FM radio. This MFD
- driver connects the radio-wl1273 V4L2 module and the wl1273
- audio codec.
+ Support for the Wolfson Microelecronics WM831x and WM832x PMICs
+ when controlled using I2C. This driver provides common support
+ for accessing the device, additional drivers must be enabled in
+ order to use the functionality of the device.
-config MFD_OMAP_USB_HOST
- bool "Support OMAP USBHS core driver"
- depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
- default y
+config MFD_WM831X_SPI
+ bool "Wolfson Microelectronics WM831x/2x PMICs with SPI"
+ select MFD_CORE
+ select MFD_WM831X
+ select REGMAP_SPI
+ depends on SPI_MASTER && GENERIC_HARDIRQS
help
- This is the core driver for the OAMP EHCI and OHCI drivers.
- This MFD driver does the required setup functionalities for
- OMAP USB Host drivers.
+ Support for the Wolfson Microelecronics WM831x and WM832x PMICs
+ when controlled using SPI. This driver provides common support
+ for accessing the device, additional drivers must be enabled in
+ order to use the functionality of the device.
-config MFD_PM8XXX
- tristate
+config MFD_WM8350
+ bool
+ depends on GENERIC_HARDIRQS
-config MFD_PM8921_CORE
- tristate "Qualcomm PM8921 PMIC chip"
- depends on MSM_SSBI
- select MFD_CORE
- select MFD_PM8XXX
- help
- If you say yes to this option, support will be included for the
- built-in PM8921 PMIC chip.
+config MFD_WM8350_CONFIG_MODE_0
+ bool
+ depends on MFD_WM8350
- This is required if your board has a PM8921 and uses its features,
- such as: MPPs, GPIOs, regulators, interrupts, and PWM.
+config MFD_WM8350_CONFIG_MODE_1
+ bool
+ depends on MFD_WM8350
- Say M here if you want to include support for PM8921 chip as a module.
- This will build a module called "pm8921-core".
+config MFD_WM8350_CONFIG_MODE_2
+ bool
+ depends on MFD_WM8350
-config MFD_PM8XXX_IRQ
- bool "Support for Qualcomm PM8xxx IRQ features"
- depends on MFD_PM8XXX
- default y if MFD_PM8XXX
- help
- This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
+config MFD_WM8350_CONFIG_MODE_3
+ bool
+ depends on MFD_WM8350
- This is required to use certain other PM 8xxx features, such as GPIO
- and MPP.
+config MFD_WM8351_CONFIG_MODE_0
+ bool
+ depends on MFD_WM8350
-config TPS65911_COMPARATOR
- tristate
+config MFD_WM8351_CONFIG_MODE_1
+ bool
+ depends on MFD_WM8350
-config MFD_TPS65090
- bool "TPS65090 Power Management chips"
- depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
- select REGMAP_I2C
- help
- If you say yes here you get support for the TPS65090 series of
- Power Management chips.
- This driver provides common support for accessing the device,
- additional drivers must be enabled in order to use the
- functionality of the device.
+config MFD_WM8351_CONFIG_MODE_2
+ bool
+ depends on MFD_WM8350
-config MFD_AAT2870_CORE
- bool "Support for the AnalogicTech AAT2870"
- select MFD_CORE
- depends on I2C=y && GPIOLIB
- help
- If you say yes here you get support for the AAT2870.
- This driver provides common support for accessing the device,
- additional drivers must be enabled in order to use the
- functionality of the device.
+config MFD_WM8351_CONFIG_MODE_3
+ bool
+ depends on MFD_WM8350
-config MFD_INTEL_MSIC
- bool "Support for Intel MSIC"
- depends on INTEL_SCU_IPC
- select MFD_CORE
- help
- Select this option to enable access to Intel MSIC (Avatele
- Passage) chip. This chip embeds audio, battery, GPIO, etc.
- devices used in Intel Medfield platforms.
+config MFD_WM8352_CONFIG_MODE_0
+ bool
+ depends on MFD_WM8350
-config MFD_RC5T583
- bool "Ricoh RC5T583 Power Management system device"
+config MFD_WM8352_CONFIG_MODE_1
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_2
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_3
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8350_I2C
+ bool "Wolfson Microelectronics WM8350 with I2C"
+ select MFD_WM8350
depends on I2C=y && GENERIC_HARDIRQS
+ help
+ The WM8350 is an integrated audio and power management
+ subsystem with watchdog and RTC functionality for embedded
+ systems. This option enables core support for the WM8350 with
+ I2C as the control interface. Additional options must be
+ selected to enable support for the functionality of the chip.
+
+config MFD_WM8400
+ tristate "Wolfson Microelectronics WM8400"
select MFD_CORE
+ depends on I2C
select REGMAP_I2C
help
- Select this option to get support for the RICOH583 Power
- Management system device.
- This driver provides common support for accessing the device
- through i2c interface. The device supports multiple sub-devices
- like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
- Additional drivers must be enabled in order to use the
- different functionality of the device.
+ Support for the Wolfson Microelecronics WM8400 PMIC and audio
+ CODEC. This driver provides common support for accessing
+ the device, additional drivers must be enabled in order to use
+ the functionality of the device.
-config MFD_ANATOP
- bool "Support for Freescale i.MX on-chip ANATOP controller"
- depends on SOC_IMX6Q
+config MFD_WM8994
+ bool "Wolfson Microelectronics WM8994"
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ depends on I2C=y && GENERIC_HARDIRQS
help
- Select this option to enable Freescale i.MX on-chip ANATOP
- MFD controller. This controller embeds regulator and
- thermal devices for Freescale i.MX platforms.
+ The WM8994 is a highly integrated hi-fi CODEC designed for
+ smartphone applicatiosn. As well as audio functionality it
+ has on board GPIO and regulator functionality which is
+ supported via the relevant subsystems. This driver provides
+ core support for the WM8994, in order to use the actual
+ functionaltiy of the device other drivers must be enabled.
endmenu
endif
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists