| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1334203443-30011-1-git-send-email-dwalker@fifo99.com>
Date: Wed, 11 Apr 2012 21:04:01 -0700
From: Daniel Walker <dwalker@...o99.com>
To: David Brown <davidb@...eaurora.org>
Cc: Bryan Huntsman <bryanh@...eaurora.org>,
Russell King <linux@....linux.org.uk>,
linux-kernel@...r.kernel.org, Daniel Walker <dwalker@...o99.com>
Subject: [PATCH 1/2] arm: msm: fix up very basic HTC Sapphire support
Adds sapphire into the make file, and fixes all the code problems that
prevented it from building (including adding board-sapphire.h)
Signed-off-by: Daniel Walker <dwalker@...o99.com>
---
arch/arm/mach-msm/Kconfig | 10 +-
arch/arm/mach-msm/Makefile | 1 +
arch/arm/mach-msm/board-sapphire.c | 18 +--
arch/arm/mach-msm/board-sapphire.h | 224 ++++++++++++++++++++++++++++++++++++
4 files changed, 235 insertions(+), 18 deletions(-)
create mode 100644 arch/arm/mach-msm/board-sapphire.h
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 1cd40ad..04f3b8e 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -6,7 +6,6 @@ choice
config ARCH_MSM7X00A
bool "MSM7x00A / MSM7x01A"
- select MACH_TROUT if !MACH_HALIBUT
select ARCH_MSM_ARM11
select MSM_SMD
select MSM_SMD_PKG3
@@ -80,6 +79,7 @@ config MSM_VIC
menu "Qualcomm MSM Board Type"
config MACH_HALIBUT
+ select MACH_TROUT if !MACH_SAPPHIRE && !MACH_HALIBUT
depends on ARCH_MSM
depends on ARCH_MSM7X00A
bool "Halibut Board (QCT SURF7201A)"
@@ -93,6 +93,14 @@ config MACH_TROUT
help
Support for the HTC Dream, T-Mobile G1, Android ADP1 devices.
+config MACH_SAPPHIRE
+ select MACH_TROUT if !MACH_HALIBUT && !MACH_SAPPHIRE
+ depends on ARCH_MSM
+ depends on ARCH_MSM7X00A
+ bool "HTC Sapphire"
+ help
+ Support for the HTC Sapphire.
+
config MACH_MSM7X30_SURF
depends on ARCH_MSM7X30
bool "MSM7x30 SURF"
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 4ad3969..aff4e5c 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -20,6 +20,7 @@ CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_SMP) += headsmp.o platsmp.o
+obj-$(CONFIG_MACH_SAPPHIRE) += board-sapphire.o devices-msm7x00.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index 4a8ea0d..e9e7969 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -38,7 +38,6 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
-#include "gpio_chip.h"
#include "board-sapphire.h"
#include "proc_comm.h"
#include "devices.h"
@@ -48,7 +47,6 @@ void msm_init_gpio(void);
static struct platform_device *devices[] __initdata = {
&msm_device_smd,
- &msm_device_dmov,
&msm_device_nand,
&msm_device_uart1,
&msm_device_uart3,
@@ -78,27 +76,13 @@ static struct map_desc sapphire_io_desc[] __initdata = {
static void __init sapphire_fixup(struct tag *tags, char **cmdline,
struct meminfo *mi)
{
- int smi_sz = parse_tag_smi((const struct tag *)tags);
-
- mi->nr_banks = 1;
- mi->bank[0].start = PHYS_OFFSET;
- mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
- if (smi_sz == 32) {
- mi->bank[0].size = (84*1024*1024);
- } else if (smi_sz == 64) {
- mi->bank[0].size = (101*1024*1024);
- } else {
- /* Give a default value when not get smi size */
- smi_sz = 64;
- mi->bank[0].size = (101*1024*1024);
- }
}
static void __init sapphire_map_io(void)
{
msm_map_common_io();
iotable_init(sapphire_io_desc, ARRAY_SIZE(sapphire_io_desc));
- msm_clock_init();
+ msm_clock_init(msm_clocks_7x01a, msm_num_clocks_7x01a);
}
MACHINE_START(SAPPHIRE, "sapphire")
diff --git a/arch/arm/mach-msm/board-sapphire.h b/arch/arm/mach-msm/board-sapphire.h
new file mode 100644
index 0000000..70f925e
--- /dev/null
+++ b/arch/arm/mach-msm/board-sapphire.h
@@ -0,0 +1,224 @@
+/* linux/arch/arm/mach-msm/board-sapphire.h
+ * Copyright (C) 2007-2009 HTC Corporation.
+ * Author: Thomas Tsai <thomas_tsai@....com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+*/
+#ifndef __ARCH_ARM_MACH_MSM_BOARD_SAPPHIRE_H
+#define __ARCH_ARM_MACH_MSM_BOARD_SAPPHIRE_H
+
+#include <mach/board.h>
+
+#define MSM_SMI_BASE 0x00000000
+#define MSM_SMI_SIZE 0x00800000
+
+#define MSM_EBI_BASE 0x10000000
+#define MSM_EBI_SIZE 0x07100000
+
+#define MSM_PMEM_GPU0_BASE 0x00000000
+#define MSM_PMEM_GPU0_SIZE 0x00700000
+
+#define SMI64_MSM_PMEM_MDP_BASE 0x15900000
+#define SMI64_MSM_PMEM_MDP_SIZE 0x00800000
+
+#define SMI64_MSM_PMEM_ADSP_BASE 0x16100000
+#define SMI64_MSM_PMEM_ADSP_SIZE 0x00800000
+
+#define SMI64_MSM_PMEM_CAMERA_BASE 0x15400000
+#define SMI64_MSM_PMEM_CAMERA_SIZE 0x00500000
+
+#define SMI64_MSM_FB_BASE 0x00700000
+#define SMI64_MSM_FB_SIZE 0x00100000
+
+#define SMI64_MSM_LINUX_BASE MSM_EBI_BASE
+#define SMI64_MSM_LINUX_SIZE 0x068e0000
+
+#define SMI64_MSM_LINUX_BASE_1 0x02000000
+#define SMI64_MSM_LINUX_SIZE_1 0x02000000
+
+#define SMI64_MSM_LINUX_BASE_2 MSM_EBI_BASE
+#define SMI64_MSM_LINUX_SIZE_2 0x05400000
+
+#define SMI32_MSM_LINUX_BASE MSM_EBI_BASE
+#define SMI32_MSM_LINUX_SIZE 0x5400000
+
+#define SMI32_MSM_PMEM_MDP_BASE (SMI32_MSM_LINUX_BASE + SMI32_MSM_LINUX_SIZE)
+#define SMI32_MSM_PMEM_MDP_SIZE 0x800000
+
+#define SMI32_MSM_PMEM_ADSP_BASE (SMI32_MSM_PMEM_MDP_BASE + SMI32_MSM_PMEM_MDP_SIZE)
+#define SMI32_MSM_PMEM_ADSP_SIZE 0x800000
+
+#define SMI32_MSM_FB_BASE (SMI32_MSM_PMEM_ADSP_BASE + SMI32_MSM_PMEM_ADSP_SIZE)
+#define SMI32_MSM_FB_SIZE 0x9b000
+
+
+#define MSM_PMEM_GPU1_SIZE 0x800000
+#define MSM_PMEM_GPU1_BASE (MSM_RAM_CONSOLE_BASE + MSM_RAM_CONSOLE_SIZE)
+
+#define MSM_RAM_CONSOLE_BASE 0x169E0000
+#define MSM_RAM_CONSOLE_SIZE (128 * SZ_1K)
+
+#if (SMI32_MSM_FB_BASE + SMI32_MSM_FB_SIZE) >= (MSM_PMEM_GPU1_BASE)
+#error invalid memory map
+#endif
+
+#if (SMI64_MSM_FB_BASE + SMI64_MSM_FB_SIZE) >= (MSM_PMEM_GPU1_BASE)
+#error invalid memory map
+#endif
+
+#define DECLARE_MSM_IOMAP
+#include <mach/msm_iomap.h>
+
+/*
+** SOC GPIO
+*/
+#define SAPPHIRE_BALL_UP_0 94
+#define SAPPHIRE_BALL_LEFT_0 18
+#define SAPPHIRE_BALL_DOWN_0 49
+#define SAPPHIRE_BALL_RIGHT_0 19
+
+#define SAPPHIRE_POWER_KEY 20
+#define SAPPHIRE_VOLUME_UP 36
+#define SAPPHIRE_VOLUME_DOWN 39
+
+#define SAPPHIRE_GPIO_PS_HOLD (25)
+#define SAPPHIRE_MDDI_1V5_EN (28)
+#define SAPPHIRE_BL_PWM (27)
+#define SAPPHIRE_TP_LS_E (1)
+#define SAPPHIRE20_TP_LS_EN (88)
+
+/* H2W */
+#define SAPPHIRE_GPIO_CABLE_IN1 (83)
+#define SAPPHIRE_GPIO_CABLE_IN2 (37)
+#define SAPPHIRE_GPIO_UART3_RX (86)
+#define SAPPHIRE_GPIO_UART3_TX (87)
+#define SAPPHIRE_GPIO_H2W_DATA (86)
+#define SAPPHIRE_GPIO_H2W_CLK (87)
+
+#define SAPPHIRE_GPIO_UART1_RTS (43)
+#define SAPPHIRE_GPIO_UART1_CTS (44)
+
+/*
+** CPLD GPIO
+**
+** Sapphire Altera CPLD can keep the registers value and
+** doesn't need a shadow to backup.
+**/
+#define SAPPHIRE_CPLD_BASE 0xFA000000 /* VA */
+#define SAPPHIRE_CPLD_START 0x98000000 /* PA */
+#define SAPPHIRE_CPLD_SIZE SZ_4K
+
+#define SAPPHIRE_GPIO_START (128) /* Pseudo GPIO number */
+
+/* Sapphire has one INT BANK only. */
+#define SAPPHIRE_GPIO_INT_B0_MASK_REG (0x0c) /*INT3 MASK*/
+#define SAPPHIRE_GPIO_INT_B0_STAT_REG (0x0e) /*INT1 STATUS*/
+
+/* LED control register */
+#define SAPPHIRE_CPLD_LED_BASE (SAPPHIRE_CPLD_BASE + 0x10) /* VA */
+#define SAPPHIRE_CPLD_LED_START (SAPPHIRE_CPLD_START + 0x10) /* PA */
+#define SAPPHIRE_CPLD_LED_SIZE 0x08
+
+/* MISCn: GPO pin to Enable/Disable some functions. */
+#define SAPPHIRE_GPIO_MISC1_BASE (SAPPHIRE_GPIO_START + 0x00)
+#define SAPPHIRE_GPIO_MISC2_BASE (SAPPHIRE_GPIO_START + 0x08)
+#define SAPPHIRE_GPIO_MISC3_BASE (SAPPHIRE_GPIO_START + 0x10)
+#define SAPPHIRE_GPIO_MISC4_BASE (SAPPHIRE_GPIO_START + 0x18)
+#define SAPPHIRE_GPIO_MISC5_BASE (SAPPHIRE_GPIO_START + 0x20)
+
+/* INT BANK0: INT1: int status, INT2: int level, INT3: int Mask */
+#define SAPPHIRE_GPIO_INT_B0_BASE (SAPPHIRE_GPIO_START + 0x28)
+
+/* MISCn GPIO: */
+#define SAPPHIRE_GPIO_CPLD128_VER_0 (SAPPHIRE_GPIO_MISC1_BASE + 4)
+#define SAPPHIRE_GPIO_CPLD128_VER_1 (SAPPHIRE_GPIO_MISC1_BASE + 5)
+#define SAPPHIRE_GPIO_CPLD128_VER_2 (SAPPHIRE_GPIO_MISC1_BASE + 6)
+#define SAPPHIRE_GPIO_CPLD128_VER_3 (SAPPHIRE_GPIO_MISC1_BASE + 7)
+
+#define SAPPHIRE_GPIO_H2W_DAT_DIR (SAPPHIRE_GPIO_MISC2_BASE + 2)
+#define SAPPHIRE_GPIO_H2W_CLK_DIR (SAPPHIRE_GPIO_MISC2_BASE + 3)
+#define SAPPHIRE_GPIO_H2W_SEL0 (SAPPHIRE_GPIO_MISC2_BASE + 6)
+#define SAPPHIRE_GPIO_H2W_SEL1 (SAPPHIRE_GPIO_MISC2_BASE + 7)
+
+#define SAPPHIRE_GPIO_I2C_PULL (SAPPHIRE_GPIO_MISC3_BASE + 2)
+#define SAPPHIRE_GPIO_TP_EN (SAPPHIRE_GPIO_MISC3_BASE + 4)
+#define SAPPHIRE_GPIO_JOG_EN (SAPPHIRE_GPIO_MISC3_BASE + 5)
+#define SAPPHIRE_GPIO_JOG_LED_EN (SAPPHIRE_GPIO_MISC3_BASE + 6)
+#define SAPPHIRE_GPIO_APKEY_LED_EN (SAPPHIRE_GPIO_MISC3_BASE + 7)
+
+#define SAPPHIRE_GPIO_VCM_PWDN (SAPPHIRE_GPIO_MISC4_BASE + 0)
+#define SAPPHIRE_GPIO_USB_H2W_SW (SAPPHIRE_GPIO_MISC4_BASE + 1)
+#define SAPPHIRE_GPIO_COMPASS_RST_N (SAPPHIRE_GPIO_MISC4_BASE + 2)
+#define SAPPHIRE_GPIO_USB_PHY_RST_N (SAPPHIRE_GPIO_MISC4_BASE + 5)
+#define SAPPHIRE_GPIO_WIFI_PA_RESETX (SAPPHIRE_GPIO_MISC4_BASE + 6)
+#define SAPPHIRE_GPIO_WIFI_EN (SAPPHIRE_GPIO_MISC4_BASE + 7)
+
+#define SAPPHIRE_GPIO_BT_32K_EN (SAPPHIRE_GPIO_MISC5_BASE + 0)
+#define SAPPHIRE_GPIO_MAC_32K_EN (SAPPHIRE_GPIO_MISC5_BASE + 1)
+#define SAPPHIRE_GPIO_MDDI_32K_EN (SAPPHIRE_GPIO_MISC5_BASE + 2)
+#define SAPPHIRE_GPIO_COMPASS_32K_EN (SAPPHIRE_GPIO_MISC5_BASE + 3)
+
+/* INT STATUS/LEVEL/MASK : INT GPIO should be the last. */
+#define SAPPHIRE_GPIO_NAVI_ACT_N (SAPPHIRE_GPIO_INT_B0_BASE + 0)
+#define SAPPHIRE_GPIO_COMPASS_IRQ (SAPPHIRE_GPIO_INT_B0_BASE + 1)
+#define SAPPHIRE_GPIO_SEARCH_ACT_N (SAPPHIRE_GPIO_INT_B0_BASE + 2)
+#define SAPPHIRE_GPIO_AUD_HSMIC_DET_N (SAPPHIRE_GPIO_INT_B0_BASE + 3)
+#define SAPPHIRE_GPIO_SDMC_CD_N (SAPPHIRE_GPIO_INT_B0_BASE + 4)
+#define SAPPHIRE_GPIO_CAM_BTN_STEP1_N (SAPPHIRE_GPIO_INT_B0_BASE + 5)
+#define SAPPHIRE_GPIO_CAM_BTN_STEP2_N (SAPPHIRE_GPIO_INT_B0_BASE + 6)
+#define SAPPHIRE_GPIO_TP_ATT_N (SAPPHIRE_GPIO_INT_B0_BASE + 7)
+
+#define SAPPHIRE_GPIO_END SAPPHIRE_GPIO_TP_ATT_N
+#define SAPPHIRE_GPIO_LAST_INT (SAPPHIRE_GPIO_TP_ATT_N)
+
+/* Bit position in the CPLD MISCn by the CPLD GPIOn: only bit0-7 is used. */
+#define CPLD_GPIO_BIT_POS_MASK(n) (1U << ((n) & 7))
+#define CPLD_GPIO_REG_OFFSET(n) _g_CPLD_MISCn_Offset[((n)-SAPPHIRE_GPIO_START) >> 3]
+#define CPLD_GPIO_REG(n) (CPLD_GPIO_REG_OFFSET(n) + SAPPHIRE_CPLD_BASE)
+
+/*
+** CPLD INT Start
+*/
+#define SAPPHIRE_INT_START (NR_MSM_IRQS + NR_GPIO_IRQS) /* pseudo number for CPLD INT */
+/* Using INT status/Bank0 for GPIO to INT */
+#define SAPPHIRE_GPIO_TO_INT(n) ((n-SAPPHIRE_GPIO_INT_B0_BASE) + SAPPHIRE_INT_START)
+#define SAPPHIRE_INT_END (SAPPHIRE_GPIO_TO_INT(SAPPHIRE_GPIO_END))
+
+/* get the INT reg by GPIO number */
+#define CPLD_INT_GPIO_TO_BANK(n) (((n)-SAPPHIRE_GPIO_INT_B0_BASE) >> 3)
+#define CPLD_INT_STATUS_REG_OFFSET_G(n) _g_INT_BANK_Offset[CPLD_INT_GPIO_TO_BANK(n)][0]
+#define CPLD_INT_LEVEL_REG_OFFSET_G(n) _g_INT_BANK_Offset[CPLD_INT_GPIO_TO_BANK(n)][1]
+#define CPLD_INT_MASK_REG_OFFSET_G(n) _g_INT_BANK_Offset[CPLD_INT_GPIO_TO_BANK(n)][2]
+#define CPLD_INT_STATUS_REG_G(n) (SAPPHIRE_CPLD_BASE + CPLD_INT_STATUS_REG_OFFSET_G(n))
+#define CPLD_INT_LEVEL_REG_G(n) (SAPPHIRE_CPLD_BASE + CPLD_INT_LEVEL_REG_OFFSET_G(n))
+#define CPLD_INT_MASK_REG_G(n) (SAPPHIRE_CPLD_BASE + CPLD_INT_MASK_REG_OFFSET_G(n))
+
+/* get the INT reg by INT number */
+#define CPLD_INT_TO_BANK(i) ((i-SAPPHIRE_INT_START) >> 3)
+#define CPLD_INT_STATUS_REG_OFFSET(i) _g_INT_BANK_Offset[CPLD_INT_TO_BANK(i)][0]
+#define CPLD_INT_LEVEL_REG_OFFSET(i) _g_INT_BANK_Offset[CPLD_INT_TO_BANK(i)][1]
+#define CPLD_INT_MASK_REG_OFFSET(i) _g_INT_BANK_Offset[CPLD_INT_TO_BANK(i)][2]
+#define CPLD_INT_STATUS_REG(i) (SAPPHIRE_CPLD_BASE + CPLD_INT_STATUS_REG_OFFSET(i))
+#define CPLD_INT_LEVEL_REG(i) (SAPPHIRE_CPLD_BASE + CPLD_INT_LEVEL_REG_OFFSET(i))
+#define CPLD_INT_MASK_REG(i) (SAPPHIRE_CPLD_BASE + CPLD_INT_MASK_REG_OFFSET(i))
+
+/* return the bit mask by INT number */
+#define SAPPHIRE_INT_BIT_MASK(i) (1U << ((i - SAPPHIRE_INT_START) & 7))
+
+void config_sapphire_camera_on_gpios(void);
+void config_sapphire_camera_off_gpios(void);
+int sapphire_get_smi_size(void);
+unsigned int sapphire_get_hwid(void);
+unsigned int sapphire_get_skuid(void);
+unsigned int is_12pin_camera(void);
+int sapphire_is_5M_camera(void);
+int sapphire_gpio_write(struct gpio_chip *chip, unsigned n, unsigned on);
+
+#endif /* GUARD */
--
1.7.10.130.g36e6c
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists