[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1334276102-15866-7-git-send-email-xiong@qca.qualcomm.com>
Date: Fri, 13 Apr 2012 08:14:31 +0800
From: xiong <xiong@....qualcomm.com>
To: <davem@...emloft.net>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: <qca-linux-team@...lcomm.com>, <nic-devel@...lcomm.com>,
xiong <xiong@....qualcomm.com>
Subject: [PATCH 06/37] atl1c: split 2 32bit registers of TPD to 4 16bit registers
TPD producer/consumer index is 16bit wide.
16bit read/write reduce the dependency of the 2 tpd rings (hi and lo)
rename reg(157C/1580) to keep name coninsistency.
Signed-off-by: xiong <xiong@....qualcomm.com>
Tested-by: Liu David <dwliu@....qualcomm.com>
---
drivers/net/ethernet/atheros/atl1c/atl1c.h | 10 +++++-
drivers/net/ethernet/atheros/atl1c/atl1c_hw.h | 17 ++++-------
drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 34 +++++-----------------
3 files changed, 22 insertions(+), 39 deletions(-)
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c.h b/drivers/net/ethernet/atheros/atl1c/atl1c.h
index f8628bc..16a5c7a 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c.h
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c.h
@@ -583,8 +583,14 @@ struct atl1c_adapter {
#define AT_WRITE_REGW(a, reg, value) (\
writew((value), ((a)->hw_addr + reg)))
-#define AT_READ_REGW(a, reg) (\
- readw((a)->hw_addr + reg))
+#define AT_READ_REGW(a, reg, pdata) do { \
+ if (unlikely((a)->hibernate)) { \
+ readw((a)->hw_addr + reg); \
+ *(u16 *)pdata = readw((a)->hw_addr + reg); \
+ } else { \
+ *(u16 *)pdata = readw((a)->hw_addr + reg); \
+ } \
+ } while (0)
#define AT_WRITE_REG_ARRAY(a, reg, offset, value) ( \
writel((value), (((a)->hw_addr + reg) + ((offset) << 2))))
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
index caff2ae..ca45fad 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
@@ -455,8 +455,8 @@ int atl1c_phy_power_saving(struct atl1c_hw *hw);
#define REG_RRD0_HEAD_ADDR_LO 0x1568
#define REG_RRD_RING_SIZE 0x1578
#define RRD_RING_SIZE_MASK 0x0FFF
-#define REG_HTPD_HEAD_ADDR_LO 0x157C
-#define REG_NTPD_HEAD_ADDR_LO 0x1580
+#define REG_TPD_PRI1_ADDR_LO 0x157C
+#define REG_TPD_PRI0_ADDR_LO 0x1580
#define REG_TPD_RING_SIZE 0x1584
#define TPD_RING_SIZE_MASK 0xFFFF
@@ -562,15 +562,10 @@ int atl1c_phy_power_saving(struct atl1c_hw *hw);
#define MB_RFDX_PROD_IDX_MASK 0xFFFF
#define REG_MB_RFD0_PROD_IDX 0x15E0
-#define MB_PRIO_PROD_IDX_MASK 0xFFFF
-#define REG_MB_PRIO_PROD_IDX 0x15F0
-#define MB_HTPD_PROD_IDX_SHIFT 0
-#define MB_NTPD_PROD_IDX_SHIFT 16
-
-#define MB_PRIO_CONS_IDX_MASK 0xFFFF
-#define REG_MB_PRIO_CONS_IDX 0x15F4
-#define MB_HTPD_CONS_IDX_SHIFT 0
-#define MB_NTPD_CONS_IDX_SHIFT 16
+#define REG_TPD_PRI1_PIDX 0x15F0 /* 16bit,hi-tpd producer idx */
+#define REG_TPD_PRI0_PIDX 0x15F2 /* 16bit,lo-tpd producer idx */
+#define REG_TPD_PRI1_CIDX 0x15F4 /* 16bit,hi-tpd consumer idx */
+#define REG_TPD_PRI0_CIDX 0x15F6 /* 16bit,lo-tpd consumer idx */
#define REG_MB_RFD01_CONS_IDX 0x15F8
#define MB_RFD0_CONS_IDX_MASK 0x0000FFFF
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index ceb9df5..c7d7640 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -995,10 +995,10 @@ static void atl1c_configure_des_ring(struct atl1c_adapter *adapter)
(u32)((tpd_ring[atl1c_trans_normal].dma &
AT_DMA_HI_ADDR_MASK) >> 32));
/* just enable normal priority TX queue */
- AT_WRITE_REG(hw, REG_NTPD_HEAD_ADDR_LO,
+ AT_WRITE_REG(hw, REG_TPD_PRI0_ADDR_LO,
(u32)(tpd_ring[atl1c_trans_normal].dma &
AT_DMA_LO_ADDR_MASK));
- AT_WRITE_REG(hw, REG_HTPD_HEAD_ADDR_LO,
+ AT_WRITE_REG(hw, REG_TPD_PRI1_ADDR_LO,
(u32)(tpd_ring[atl1c_trans_high].dma &
AT_DMA_LO_ADDR_MASK));
AT_WRITE_REG(hw, REG_TPD_RING_SIZE,
@@ -1519,16 +1519,11 @@ static bool atl1c_clean_tx_irq(struct atl1c_adapter *adapter,
struct pci_dev *pdev = adapter->pdev;
u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean);
u16 hw_next_to_clean;
- u16 shift;
- u32 data;
+ u16 reg;
- if (type == atl1c_trans_high)
- shift = MB_HTPD_CONS_IDX_SHIFT;
- else
- shift = MB_NTPD_CONS_IDX_SHIFT;
+ reg = type == atl1c_trans_high ? REG_TPD_PRI1_CIDX : REG_TPD_PRI0_CIDX;
- AT_READ_REG(&adapter->hw, REG_MB_PRIO_CONS_IDX, &data);
- hw_next_to_clean = (data >> shift) & MB_PRIO_PROD_IDX_MASK;
+ AT_READ_REGW(&adapter->hw, reg, &hw_next_to_clean);
while (next_to_clean != hw_next_to_clean) {
buffer_info = &tpd_ring->buffer_info[next_to_clean];
@@ -2090,23 +2085,10 @@ static void atl1c_tx_queue(struct atl1c_adapter *adapter, struct sk_buff *skb,
struct atl1c_tpd_desc *tpd, enum atl1c_trans_queue type)
{
struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type];
- u32 prod_data;
+ u16 reg;
- AT_READ_REG(&adapter->hw, REG_MB_PRIO_PROD_IDX, &prod_data);
- switch (type) {
- case atl1c_trans_high:
- prod_data &= 0xFFFF0000;
- prod_data |= tpd_ring->next_to_use & 0xFFFF;
- break;
- case atl1c_trans_normal:
- prod_data &= 0x0000FFFF;
- prod_data |= (tpd_ring->next_to_use & 0xFFFF) << 16;
- break;
- default:
- break;
- }
- wmb();
- AT_WRITE_REG(&adapter->hw, REG_MB_PRIO_PROD_IDX, prod_data);
+ reg = type == atl1c_trans_high ? REG_TPD_PRI1_PIDX : REG_TPD_PRI0_PIDX;
+ AT_WRITE_REGW(&adapter->hw, reg, tpd_ring->next_to_use);
}
static netdev_tx_t atl1c_xmit_frame(struct sk_buff *skb,
--
1.7.7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists