| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4F8790F6.5080408@intel.com>
Date: Fri, 13 Apr 2012 10:35:34 +0800
From: "Yan, Zheng" <zheng.z.yan@...el.com>
To: bhelgaas@...gle.com, rjw@...k.pl, linux-kernel@...r.kernel.org,
linux-pci@...r.kernel.org, linux-pm@...r.kernel.org
Subject: [RFC PATCH] PCIe: Add PCIe runtime D3cold support
Hi all,
This patch adds PCIe runtime D3cold support, namely cut power supply for functions
beneath a PCIe port when they all have entered D3. A device in D3cold can only
generate wake event through the WAKE# pin. Because we can not access to a device's
configure space while it's in D3cold, pme_poll is disabled for devices in D3cold.
Any comment will be appreciated.
Signed-off-by: Zheng Yan <zheng.z.yan@...el.com>
---
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 0f150f2..e210e8cb 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -224,7 +224,7 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
[PCI_D1] = ACPI_STATE_D1,
[PCI_D2] = ACPI_STATE_D2,
[PCI_D3hot] = ACPI_STATE_D3,
- [PCI_D3cold] = ACPI_STATE_D3
+ [PCI_D3cold] = ACPI_STATE_D3_COLD
};
int error = -EINVAL;
@@ -296,7 +296,8 @@ static void acpi_pci_propagate_run_wake(struct pci_bus *bus, bool enable)
static int acpi_pci_run_wake(struct pci_dev *dev, bool enable)
{
- if (dev->pme_interrupt)
+ /* PME interrupt isn't available in the D3cold case */
+ if (dev->pme_interrupt && !dev->runtime_d3cold)
return 0;
if (!acpi_pm_device_run_wake(&dev->dev, enable))
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 8156744..bc16869 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -731,8 +731,8 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
int error;
/* bound the state we're entering */
- if (state > PCI_D3hot)
- state = PCI_D3hot;
+ if (state > PCI_D3cold)
+ state = PCI_D3cold;
else if (state < PCI_D0)
state = PCI_D0;
else if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
@@ -750,7 +750,8 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
return 0;
- error = pci_raw_set_power_state(dev, state);
+ error = pci_raw_set_power_state(dev, state > PCI_D3hot ?
+ PCI_D3hot : state);
if (!__pci_complete_power_transition(dev, state))
error = 0;
@@ -1482,6 +1483,17 @@ bool pci_pme_capable(struct pci_dev *dev, pci_power_t state)
return !!(dev->pme_support & (1 << state));
}
+static void pci_pme_poll_wakeup(struct pci_dev *dev)
+{
+ struct pci_dev *bridge = dev->bus->self;
+
+ /* don't poll the pme bit if parent is in low power state */
+ if (bridge && bridge->current_state != PCI_D0)
+ return;
+
+ pci_pme_wakeup(dev, NULL);
+}
+
static void pci_pme_list_scan(struct work_struct *work)
{
struct pci_pme_device *pme_dev, *n;
@@ -1490,7 +1502,7 @@ static void pci_pme_list_scan(struct work_struct *work)
if (!list_empty(&pci_pme_list)) {
list_for_each_entry_safe(pme_dev, n, &pci_pme_list, list) {
if (pme_dev->dev->pme_poll) {
- pci_pme_wakeup(pme_dev->dev, NULL);
+ pci_pme_poll_wakeup(pme_dev->dev);
} else {
list_del(&pme_dev->list);
kfree(pme_dev);
@@ -1608,6 +1620,10 @@ int __pci_enable_wake(struct pci_dev *dev, pci_power_t state,
if (enable) {
int error;
+ if (runtime && state >= PCI_D3cold)
+ dev->runtime_d3cold = true;
+ else
+ dev->runtime_d3cold = false;
if (pci_pme_capable(dev, state))
pci_pme_active(dev, true);
else
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index e0610bd..d66b7e9 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -11,11 +11,13 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/pm.h>
+#include <linux/pm_runtime.h>
#include <linux/init.h>
#include <linux/pcieport_if.h>
#include <linux/aer.h>
#include <linux/dmi.h>
#include <linux/pci-aspm.h>
+#include <linux/delay.h>
#include "portdrv.h"
#include "aer/aerdrv.h"
@@ -99,6 +101,25 @@ static int pcie_port_resume_noirq(struct device *dev)
return 0;
}
+static int pcie_port_runtime_suspend(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+
+ pci_save_state(pdev);
+ return 0;
+}
+
+static int pcie_port_runtime_resume(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+
+ pci_restore_state(pdev);
+ if (pdev->runtime_d3cold)
+ msleep(100);
+
+ return 0;
+}
+
static const struct dev_pm_ops pcie_portdrv_pm_ops = {
.suspend = pcie_port_device_suspend,
.resume = pcie_port_device_resume,
@@ -107,6 +128,8 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = {
.poweroff = pcie_port_device_suspend,
.restore = pcie_port_device_resume,
.resume_noirq = pcie_port_resume_noirq,
+ .runtime_suspend = pcie_port_runtime_suspend,
+ .runtime_resume = pcie_port_runtime_resume,
};
#define PCIE_PORTDRV_PM_OPS (&pcie_portdrv_pm_ops)
@@ -144,12 +167,14 @@ static int __devinit pcie_portdrv_probe(struct pci_dev *dev,
return status;
pci_save_state(dev);
+ pm_runtime_put_noidle(&dev->dev);
return 0;
}
static void pcie_portdrv_remove(struct pci_dev *dev)
{
+ pm_runtime_get_noresume(&dev->dev);
pcie_port_device_remove(dev);
pci_disable_device(dev);
}
diff --git a/include/linux/pci.h b/include/linux/pci.h
index e444f5b..b41d9a1 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -281,6 +281,7 @@ struct pci_dev {
unsigned int no_d1d2:1; /* Only allow D0 and D3 */
unsigned int mmio_always_on:1; /* disallow turning off io/mem
decoding during bar sizing */
+ unsigned int runtime_d3cold:1;
unsigned int wakeup_prepared:1;
unsigned int d3_delay; /* D3->D0 transition time in ms */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists