lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Date:	Mon, 16 Apr 2012 10:27:47 +0200
From:	Linus Walleij <linus.walleij@...ricsson.com>
To:	Samuel Ortiz <sameo@...ux.intel.com>,
	<linux-kernel@...r.kernel.org>
Cc:	Linus Walleij <linus.walleij@...aro.org>,
	Srinidhi Kasagar <srinidhi.kasagar@...ricsson.com>,
	Rabin Vincent <rabin.vincent@...ricsson.com>,
	Jonas Aberg <jonas.aberg@...ricsson.com>,
	Per Forlin <per.forlin@...ricsson.com>,
	Ulf Hansson <ulf.hansson@...ricsson.com>
Subject: [PATCH 2/2] mfd/ab5500: delete AB5500 support

From: Linus Walleij <linus.walleij@...aro.org>

This platform has been obsoleted and was only available inside of
ST-Ericsson, no users of this code are left in the world. This
deletes the core U5500 support entirely in the same manner as the
obsoleted U8500 silicon was previously deleted.

Cc: Srinidhi Kasagar <srinidhi.kasagar@...ricsson.com>
Cc: Rabin Vincent <rabin.vincent@...ricsson.com>
Cc: Jonas Aberg <jonas.aberg@...ricsson.com>
Cc: Per Forlin <per.forlin@...ricsson.com>
Cc: Ulf Hansson <ulf.hansson@...ricsson.com>
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
---
 drivers/mfd/Kconfig               |   17 -
 drivers/mfd/Makefile              |    2 -
 drivers/mfd/ab5500-core.c         | 1439 -------------------------------------
 drivers/mfd/ab5500-debugfs.c      |  807 ---------------------
 drivers/mfd/ab5500-debugfs.h      |   22 -
 include/linux/mfd/abx500.h        |    5 +-
 include/linux/mfd/abx500/ab5500.h |  140 ----
 7 files changed, 1 insertion(+), 2431 deletions(-)
 delete mode 100644 drivers/mfd/ab5500-core.c
 delete mode 100644 drivers/mfd/ab5500-debugfs.c
 delete mode 100644 drivers/mfd/ab5500-debugfs.h
 delete mode 100644 include/linux/mfd/abx500/ab5500.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index d339a1f..02b042c 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -641,23 +641,6 @@ config EZX_PCAP
 	  This enables the PCAP ASIC present on EZX Phones. This is
 	  needed for MMC, TouchScreen, Sound, USB, etc..
 
-config AB5500_CORE
-	bool "ST-Ericsson AB5500 Mixed Signal Power Management chip"
-	depends on ABX500_CORE && MFD_DB5500_PRCMU
-	select MFD_CORE
-	help
-	  Select this option to enable access to AB5500 power management
-	  chip. This connects to the db5500 chip via the I2C bus via PRCMU.
-	  This chip embeds various other multimedia funtionalities as well.
-
-config AB5500_DEBUG
-	bool "Enable debug info via debugfs"
-	depends on AB5500_CORE && DEBUG_FS
-	default y if DEBUG_FS
-	help
-	  Select this option if you want debug information from the AB5500
-	  using the debug filesystem, debugfs.
-
 config AB8500_CORE
 	bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
 	depends on GENERIC_HARDIRQS && ABX500_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 2f53081..669ba7d 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -87,8 +87,6 @@ obj-$(CONFIG_PCF50633_GPIO)	+= pcf50633-gpio.o
 obj-$(CONFIG_ABX500_CORE)	+= abx500-core.o
 obj-$(CONFIG_AB3100_CORE)	+= ab3100-core.o
 obj-$(CONFIG_AB3100_OTP)	+= ab3100-otp.o
-obj-$(CONFIG_AB5500_CORE)	+= ab5500-core.o
-obj-$(CONFIG_AB5500_DEBUG)	+= ab5500-debugfs.o
 obj-$(CONFIG_AB8500_CORE)	+= ab8500-core.o ab8500-sysctrl.o
 obj-$(CONFIG_AB8500_DEBUG)	+= ab8500-debugfs.o
 obj-$(CONFIG_AB8500_GPADC)	+= ab8500-gpadc.o
diff --git a/drivers/mfd/ab5500-core.c b/drivers/mfd/ab5500-core.c
deleted file mode 100644
index 54d0fe4..0000000
--- a/drivers/mfd/ab5500-core.c
+++ /dev/null
@@ -1,1439 +0,0 @@
-/*
- * Copyright (C) 2007-2011 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * Low-level core for exclusive access to the AB5500 IC on the I2C bus
- * and some basic chip-configuration.
- * Author: Bengt Jonsson <bengt.g.jonsson@...ricsson.com>
- * Author: Mattias Nilsson <mattias.i.nilsson@...ricsson.com>
- * Author: Mattias Wallin <mattias.wallin@...ricsson.com>
- * Author: Rickard Andersson <rickard.andersson@...ricsson.com>
- * Author: Karl Komierowski  <karl.komierowski@...ricsson.com>
- * Author: Bibek Basu <bibek.basu@...ricsson.com>
- *
- * TODO: Event handling with irq_chip. Waiting for PRCMU fw support.
- */
-
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/device.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/random.h>
-#include <linux/mfd/abx500.h>
-#include <linux/mfd/abx500/ab5500.h>
-#include <linux/list.h>
-#include <linux/bitops.h>
-#include <linux/spinlock.h>
-#include <linux/mfd/core.h>
-#include <linux/mfd/db5500-prcmu.h>
-
-#include "ab5500-core.h"
-#include "ab5500-debugfs.h"
-
-#define AB5500_NUM_EVENT_REG 23
-#define AB5500_IT_LATCH0_REG 0x40
-#define AB5500_IT_MASK0_REG 0x60
-
-/*
- * Permissible register ranges for reading and writing per device and bank.
- *
- * The ranges must be listed in increasing address order, and no overlaps are
- * allowed. It is assumed that write permission implies read permission
- * (i.e. only RO and RW permissions should be used).  Ranges with write
- * permission must not be split up.
- */
-
-#define NO_RANGE {.count = 0, .range = NULL,}
-static struct ab5500_i2c_banks ab5500_bank_ranges[AB5500_NUM_DEVICES] = {
-	[AB5500_DEVID_USB] =  {
-		.nbanks = 1,
-		.bank = (struct ab5500_i2c_ranges []) {
-			{
-				.bankid = AB5500_BANK_USB,
-				.nranges = 12,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x01,
-						.last = 0x01,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x80,
-						.last = 0x83,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x87,
-						.last = 0x8A,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x8B,
-						.last = 0x8B,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0x91,
-						.last = 0x92,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0x93,
-						.last = 0x93,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x94,
-						.last = 0x94,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0xA8,
-						.last = 0xB0,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0xB2,
-						.last = 0xB2,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0xB4,
-						.last = 0xBC,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0xBF,
-						.last = 0xBF,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0xC1,
-						.last = 0xC5,
-						.perm = AB5500_PERM_RO,
-					},
-				},
-			},
-		},
-	},
-	[AB5500_DEVID_ADC] =  {
-		.nbanks = 1,
-		.bank = (struct ab5500_i2c_ranges []) {
-			{
-				.bankid = AB5500_BANK_ADC,
-				.nranges = 6,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x1F,
-						.last = 0x22,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0x23,
-						.last = 0x24,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x26,
-						.last = 0x2D,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0x2F,
-						.last = 0x34,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x37,
-						.last = 0x57,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x58,
-						.last = 0x58,
-						.perm = AB5500_PERM_RO,
-					},
-				},
-			},
-		},
-	},
-	[AB5500_DEVID_LEDS] =  {
-		.nbanks = 1,
-		.bank = (struct ab5500_i2c_ranges []) {
-			{
-				.bankid = AB5500_BANK_LED,
-				.nranges = 1,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x00,
-						.last = 0x0C,
-						.perm = AB5500_PERM_RW,
-					},
-				},
-			},
-		},
-	},
-	[AB5500_DEVID_VIDEO] =   {
-		.nbanks = 1,
-		.bank = (struct ab5500_i2c_ranges []) {
-			{
-				.bankid = AB5500_BANK_VDENC,
-				.nranges = 12,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x00,
-						.last = 0x08,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x09,
-						.last = 0x09,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0x0A,
-						.last = 0x12,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x15,
-						.last = 0x19,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x1B,
-						.last = 0x21,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x27,
-						.last = 0x2C,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x41,
-						.last = 0x41,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x45,
-						.last = 0x5B,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x5D,
-						.last = 0x5D,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x69,
-						.last = 0x69,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x6C,
-						.last = 0x6D,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x80,
-						.last = 0x81,
-						.perm = AB5500_PERM_RW,
-					},
-				},
-			},
-		},
-	},
-	[AB5500_DEVID_REGULATORS] =   {
-		.nbanks = 2,
-		.bank =  (struct ab5500_i2c_ranges []) {
-			{
-				.bankid = AB5500_BANK_STARTUP,
-				.nranges = 12,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x00,
-						.last = 0x01,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x1F,
-						.last = 0x1F,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x2E,
-						.last = 0x2E,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0x2F,
-						.last = 0x30,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x50,
-						.last = 0x51,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x60,
-						.last = 0x61,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x66,
-						.last = 0x8A,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x8C,
-						.last = 0x96,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0xAA,
-						.last = 0xB4,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0xB7,
-						.last = 0xBF,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0xC1,
-						.last = 0xCA,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0xD3,
-						.last = 0xE0,
-						.perm = AB5500_PERM_RW,
-					},
-				},
-			},
-			{
-				.bankid = AB5500_BANK_SIM_USBSIM,
-				.nranges = 1,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x13,
-						.last = 0x19,
-						.perm = AB5500_PERM_RW,
-					},
-				},
-			},
-		},
-	},
-	[AB5500_DEVID_SIM] =   {
-		.nbanks = 1,
-		.bank = (struct ab5500_i2c_ranges []) {
-			{
-				.bankid = AB5500_BANK_SIM_USBSIM,
-				.nranges = 1,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x13,
-						.last = 0x19,
-						.perm = AB5500_PERM_RW,
-					},
-				},
-			},
-		},
-	},
-	[AB5500_DEVID_RTC] =   {
-		.nbanks = 1,
-		.bank = (struct ab5500_i2c_ranges []) {
-			{
-				.bankid = AB5500_BANK_RTC,
-				.nranges = 2,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x00,
-						.last = 0x04,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0x06,
-						.last = 0x0C,
-						.perm = AB5500_PERM_RW,
-					},
-				},
-			},
-		},
-	},
-	[AB5500_DEVID_CHARGER] =   {
-		.nbanks = 1,
-		.bank = (struct ab5500_i2c_ranges []) {
-			{
-				.bankid = AB5500_BANK_CHG,
-				.nranges = 2,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x11,
-						.last = 0x11,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0x12,
-						.last = 0x1B,
-						.perm = AB5500_PERM_RW,
-					},
-				},
-			},
-		},
-	},
-	[AB5500_DEVID_FUELGAUGE] =   {
-		.nbanks = 1,
-		.bank = (struct ab5500_i2c_ranges []) {
-			{
-				.bankid = AB5500_BANK_FG_BATTCOM_ACC,
-				.nranges = 2,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x00,
-						.last = 0x0B,
-						.perm = AB5500_PERM_RO,
-					},
-					{
-						.first = 0x0C,
-						.last = 0x10,
-						.perm = AB5500_PERM_RW,
-					},
-				},
-			},
-		},
-	},
-	[AB5500_DEVID_VIBRATOR] =   {
-		.nbanks = 1,
-		.bank = (struct ab5500_i2c_ranges []) {
-			{
-				.bankid = AB5500_BANK_VIBRA,
-				.nranges = 2,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x10,
-						.last = 0x13,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0xFE,
-						.last = 0xFE,
-						.perm = AB5500_PERM_RW,
-					},
-				},
-			},
-		},
-	},
-	[AB5500_DEVID_CODEC] =   {
-		.nbanks = 1,
-		.bank = (struct ab5500_i2c_ranges []) {
-			{
-				.bankid = AB5500_BANK_AUDIO_HEADSETUSB,
-				.nranges = 2,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x00,
-						.last = 0x48,
-						.perm = AB5500_PERM_RW,
-					},
-					{
-						.first = 0xEB,
-						.last = 0xFB,
-						.perm = AB5500_PERM_RW,
-					},
-				},
-			},
-		},
-	},
-	[AB5500_DEVID_POWER] = {
-		.nbanks	= 2,
-		.bank	= (struct ab5500_i2c_ranges []) {
-			{
-				.bankid = AB5500_BANK_STARTUP,
-				.nranges = 1,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x30,
-						.last = 0x30,
-						.perm = AB5500_PERM_RW,
-					},
-				},
-			},
-			{
-				.bankid = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP,
-				.nranges = 1,
-				.range = (struct ab5500_reg_range[]) {
-					{
-						.first = 0x01,
-						.last = 0x01,
-						.perm = AB5500_PERM_RW,
-					},
-				},
-			},
-		},
-	},
-};
-
-#define AB5500_IRQ(bank, bit)	((bank) * 8 + (bit))
-
-/* I appologize for the resource names beeing a mix of upper case
- * and lower case but I want them to be exact as the documentation */
-static struct mfd_cell ab5500_devs[AB5500_NUM_DEVICES] = {
-	[AB5500_DEVID_LEDS] = {
-		.name = "ab5500-leds",
-		.id = AB5500_DEVID_LEDS,
-	},
-	[AB5500_DEVID_POWER] = {
-		.name = "ab5500-power",
-		.id = AB5500_DEVID_POWER,
-	},
-	[AB5500_DEVID_REGULATORS] = {
-		.name = "ab5500-regulator",
-		.id = AB5500_DEVID_REGULATORS,
-	},
-	[AB5500_DEVID_SIM] = {
-		.name = "ab5500-sim",
-		.id = AB5500_DEVID_SIM,
-		.num_resources = 1,
-		.resources = (struct resource[]) {
-			{
-				.name = "SIMOFF",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(2, 0), /*rising*/
-				.end = AB5500_IRQ(2, 1), /*falling*/
-			},
-		},
-	},
-	[AB5500_DEVID_RTC] = {
-		.name = "ab5500-rtc",
-		.id = AB5500_DEVID_RTC,
-		.num_resources = 1,
-		.resources = (struct resource[]) {
-			{
-				.name	= "RTC_Alarm",
-				.flags	= IORESOURCE_IRQ,
-				.start	= AB5500_IRQ(1, 7),
-				.end	= AB5500_IRQ(1, 7),
-			}
-		},
-	},
-	[AB5500_DEVID_CHARGER] = {
-		.name = "ab5500-charger",
-		.id = AB5500_DEVID_CHARGER,
-	},
-	[AB5500_DEVID_ADC] = {
-		.name = "ab5500-adc",
-		.id = AB5500_DEVID_ADC,
-		.num_resources = 10,
-		.resources = (struct resource[]) {
-			{
-				.name = "TRIGGER-0",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(0, 0),
-				.end = AB5500_IRQ(0, 0),
-			},
-			{
-				.name = "TRIGGER-1",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(0, 1),
-				.end = AB5500_IRQ(0, 1),
-			},
-			{
-				.name = "TRIGGER-2",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(0, 2),
-				.end = AB5500_IRQ(0, 2),
-			},
-			{
-				.name = "TRIGGER-3",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(0, 3),
-				.end = AB5500_IRQ(0, 3),
-			},
-			{
-				.name = "TRIGGER-4",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(0, 4),
-				.end = AB5500_IRQ(0, 4),
-			},
-			{
-				.name = "TRIGGER-5",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(0, 5),
-				.end = AB5500_IRQ(0, 5),
-			},
-			{
-				.name = "TRIGGER-6",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(0, 6),
-				.end = AB5500_IRQ(0, 6),
-			},
-			{
-				.name = "TRIGGER-7",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(0, 7),
-				.end = AB5500_IRQ(0, 7),
-			},
-			{
-				.name = "TRIGGER-VBAT",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(0, 8),
-				.end = AB5500_IRQ(0, 8),
-			},
-			{
-				.name = "TRIGGER-VBAT-TXON",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(0, 9),
-				.end = AB5500_IRQ(0, 9),
-			},
-		},
-	},
-	[AB5500_DEVID_FUELGAUGE] = {
-		.name = "ab5500-fuelgauge",
-		.id = AB5500_DEVID_FUELGAUGE,
-		.num_resources = 6,
-		.resources = (struct resource[]) {
-			{
-				.name = "Batt_attach",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(7, 5),
-				.end = AB5500_IRQ(7, 5),
-			},
-			{
-				.name = "Batt_removal",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(7, 6),
-				.end = AB5500_IRQ(7, 6),
-			},
-			{
-				.name = "UART_framing",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(7, 7),
-				.end = AB5500_IRQ(7, 7),
-			},
-			{
-				.name = "UART_overrun",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(8, 0),
-				.end = AB5500_IRQ(8, 0),
-			},
-			{
-				.name = "UART_Rdy_RX",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(8, 1),
-				.end = AB5500_IRQ(8, 1),
-			},
-			{
-				.name = "UART_Rdy_TX",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(8, 2),
-				.end = AB5500_IRQ(8, 2),
-			},
-		},
-	},
-	[AB5500_DEVID_VIBRATOR] = {
-		.name = "ab5500-vibrator",
-		.id = AB5500_DEVID_VIBRATOR,
-	},
-	[AB5500_DEVID_CODEC] = {
-		.name = "ab5500-codec",
-		.id = AB5500_DEVID_CODEC,
-		.num_resources = 3,
-		.resources = (struct resource[]) {
-			{
-				.name = "audio_spkr1_ovc",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(9, 5),
-				.end = AB5500_IRQ(9, 5),
-			},
-			{
-				.name = "audio_plllocked",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(9, 6),
-				.end = AB5500_IRQ(9, 6),
-			},
-			{
-				.name = "audio_spkr2_ovc",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(17, 4),
-				.end = AB5500_IRQ(17, 4),
-			},
-		},
-	},
-	[AB5500_DEVID_USB] = {
-		.name = "ab5500-usb",
-		.id = AB5500_DEVID_USB,
-		.num_resources = 36,
-		.resources = (struct resource[]) {
-			{
-				.name = "Link_Update",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(22, 1),
-				.end = AB5500_IRQ(22, 1),
-			},
-			{
-				.name = "DCIO",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(8, 3),
-				.end = AB5500_IRQ(8, 4),
-			},
-			{
-				.name = "VBUS_R",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(8, 5),
-				.end = AB5500_IRQ(8, 5),
-			},
-			{
-				.name = "VBUS_F",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(8, 6),
-				.end = AB5500_IRQ(8, 6),
-			},
-			{
-				.name = "CHGstate_10_PCVBUSchg",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(8, 7),
-				.end = AB5500_IRQ(8, 7),
-			},
-			{
-				.name = "DCIOreverse_ovc",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(9, 0),
-				.end = AB5500_IRQ(9, 0),
-			},
-			{
-				.name = "USBCharDetDone",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(9, 1),
-				.end = AB5500_IRQ(9, 1),
-			},
-			{
-				.name = "DCIO_no_limit",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(9, 2),
-				.end = AB5500_IRQ(9, 2),
-			},
-			{
-				.name = "USB_suspend",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(9, 3),
-				.end = AB5500_IRQ(9, 3),
-			},
-			{
-				.name = "DCIOreverse_fwdcurrent",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(9, 4),
-				.end = AB5500_IRQ(9, 4),
-			},
-			{
-				.name = "Vbus_Imeasmax_change",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(9, 5),
-				.end = AB5500_IRQ(9, 6),
-			},
-			{
-				.name = "OVV",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(14, 5),
-				.end = AB5500_IRQ(14, 5),
-			},
-			{
-				.name = "USBcharging_NOTok",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(15, 3),
-				.end = AB5500_IRQ(15, 3),
-			},
-			{
-				.name = "usb_adp_sensoroff",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(15, 6),
-				.end = AB5500_IRQ(15, 6),
-			},
-			{
-				.name = "usb_adp_probeplug",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(15, 7),
-				.end = AB5500_IRQ(15, 7),
-			},
-			{
-				.name = "usb_adp_sinkerror",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(16, 0),
-				.end = AB5500_IRQ(16, 6),
-			},
-			{
-				.name = "usb_adp_sourceerror",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(16, 1),
-				.end = AB5500_IRQ(16, 1),
-			},
-			{
-				.name = "usb_idgnd_r",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(16, 2),
-				.end = AB5500_IRQ(16, 2),
-			},
-			{
-				.name = "usb_idgnd_f",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(16, 3),
-				.end = AB5500_IRQ(16, 3),
-			},
-			{
-				.name = "usb_iddetR1",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(16, 4),
-				.end = AB5500_IRQ(16, 5),
-			},
-			{
-				.name = "usb_iddetR2",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(16, 6),
-				.end = AB5500_IRQ(16, 7),
-			},
-			{
-				.name = "usb_iddetR3",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(17, 0),
-				.end = AB5500_IRQ(17, 1),
-			},
-			{
-				.name = "usb_iddetR4",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(17, 2),
-				.end = AB5500_IRQ(17, 3),
-			},
-			{
-				.name = "CharTempWindowOk",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(17, 7),
-				.end = AB5500_IRQ(18, 0),
-			},
-			{
-				.name = "USB_SprDetect",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(18, 1),
-				.end = AB5500_IRQ(18, 1),
-			},
-			{
-				.name = "usb_adp_probe_unplug",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(18, 2),
-				.end = AB5500_IRQ(18, 2),
-			},
-			{
-				.name = "VBUSChDrop",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(18, 3),
-				.end = AB5500_IRQ(18, 4),
-			},
-			{
-				.name = "dcio_char_rec_done",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(18, 5),
-				.end = AB5500_IRQ(18, 5),
-			},
-			{
-				.name = "Charging_stopped_by_temp",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(18, 6),
-				.end = AB5500_IRQ(18, 6),
-			},
-			{
-				.name = "CHGstate_11_SafeModeVBUS",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(21, 1),
-				.end = AB5500_IRQ(21, 2),
-			},
-			{
-				.name = "CHGstate_12_comletedVBUS",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(21, 2),
-				.end = AB5500_IRQ(21, 2),
-			},
-			{
-				.name = "CHGstate_13_completedVBUS",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(21, 3),
-				.end = AB5500_IRQ(21, 3),
-			},
-			{
-				.name = "CHGstate_14_FullChgDCIO",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(21, 4),
-				.end = AB5500_IRQ(21, 4),
-			},
-			{
-				.name = "CHGstate_15_SafeModeDCIO",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(21, 5),
-				.end = AB5500_IRQ(21, 5),
-			},
-			{
-				.name = "CHGstate_16_OFFsuspendDCIO",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(21, 6),
-				.end = AB5500_IRQ(21, 6),
-			},
-			{
-				.name = "CHGstate_17_completedDCIO",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(21, 7),
-				.end = AB5500_IRQ(21, 7),
-			},
-		},
-	},
-	[AB5500_DEVID_OTP] = {
-		.name = "ab5500-otp",
-		.id = AB5500_DEVID_OTP,
-	},
-	[AB5500_DEVID_VIDEO] = {
-		.name = "ab5500-video",
-		.id = AB5500_DEVID_VIDEO,
-		.num_resources = 1,
-		.resources = (struct resource[]) {
-			{
-				.name = "plugTVdet",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(22, 2),
-				.end = AB5500_IRQ(22, 2),
-			},
-		},
-	},
-	[AB5500_DEVID_DBIECI] = {
-		.name = "ab5500-dbieci",
-		.id = AB5500_DEVID_DBIECI,
-		.num_resources = 10,
-		.resources = (struct resource[]) {
-			{
-				.name = "COLL",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(14, 0),
-				.end = AB5500_IRQ(14, 0),
-			},
-			{
-				.name = "RESERR",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(14, 1),
-				.end = AB5500_IRQ(14, 1),
-			},
-			{
-				.name = "FRAERR",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(14, 2),
-				.end = AB5500_IRQ(14, 2),
-			},
-			{
-				.name = "COMERR",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(14, 3),
-				.end = AB5500_IRQ(14, 3),
-			},
-			{
-				.name = "BSI_indicator",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(14, 4),
-				.end = AB5500_IRQ(14, 4),
-			},
-			{
-				.name = "SPDSET",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(14, 6),
-				.end = AB5500_IRQ(14, 6),
-			},
-			{
-				.name = "DSENT",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(14, 7),
-				.end = AB5500_IRQ(14, 7),
-			},
-			{
-				.name = "DREC",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(15, 0),
-				.end = AB5500_IRQ(15, 0),
-			},
-			{
-				.name = "ACCINT",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(15, 1),
-				.end = AB5500_IRQ(15, 1),
-			},
-			{
-				.name = "NOPINT",
-				.flags = IORESOURCE_IRQ,
-				.start = AB5500_IRQ(15, 2),
-				.end = AB5500_IRQ(15, 2),
-			},
-		},
-	},
-	[AB5500_DEVID_ONSWA] = {
-		.name = "ab5500-onswa",
-		.id = AB5500_DEVID_ONSWA,
-		.num_resources = 2,
-		.resources = (struct resource[]) {
-			{
-				.name	= "ONSWAn_rising",
-				.flags	= IORESOURCE_IRQ,
-				.start	= AB5500_IRQ(1, 3),
-				.end	= AB5500_IRQ(1, 3),
-			},
-			{
-				.name	= "ONSWAn_falling",
-				.flags	= IORESOURCE_IRQ,
-				.start	= AB5500_IRQ(1, 4),
-				.end	= AB5500_IRQ(1, 4),
-			},
-		},
-	},
-};
-
-/*
- * Functionality for getting/setting register values.
- */
-int ab5500_get_register_interruptible_raw(struct ab5500 *ab,
-					  u8 bank, u8 reg,
-					  u8 *value)
-{
-	int err;
-
-	if (bank >= AB5500_NUM_BANKS)
-		return -EINVAL;
-
-	err = mutex_lock_interruptible(&ab->access_mutex);
-	if (err)
-		return err;
-	err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr, reg, value, 1);
-
-	mutex_unlock(&ab->access_mutex);
-	return err;
-}
-
-static int get_register_page_interruptible(struct ab5500 *ab, u8 bank,
-	u8 first_reg, u8 *regvals, u8 numregs)
-{
-	int err;
-
-	if (bank >= AB5500_NUM_BANKS)
-		return -EINVAL;
-
-	err = mutex_lock_interruptible(&ab->access_mutex);
-	if (err)
-		return err;
-
-	while (numregs) {
-		/* The hardware limit for get page is 4 */
-		u8 curnum = min_t(u8, numregs, 4u);
-
-		err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr,
-					    first_reg, regvals, curnum);
-		if (err)
-			goto out;
-
-		numregs -= curnum;
-		first_reg += curnum;
-		regvals += curnum;
-	}
-
-out:
-	mutex_unlock(&ab->access_mutex);
-	return err;
-}
-
-int ab5500_mask_and_set_register_interruptible_raw(struct ab5500 *ab, u8 bank,
-	u8 reg, u8 bitmask, u8 bitvalues)
-{
-	int err = 0;
-
-	if (bank >= AB5500_NUM_BANKS)
-		return -EINVAL;
-
-	if (bitmask) {
-		u8 buf;
-
-		err = mutex_lock_interruptible(&ab->access_mutex);
-		if (err)
-			return err;
-
-		if (bitmask == 0xFF) /* No need to read in this case. */
-			buf = bitvalues;
-		else { /* Read and modify the register value. */
-			err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr,
-				reg, &buf, 1);
-			if (err)
-				return err;
-
-			buf = ((~bitmask & buf) | (bitmask & bitvalues));
-		}
-		/* Write the new value. */
-		err = db5500_prcmu_abb_write(bankinfo[bank].slave_addr, reg,
-					     &buf, 1);
-
-		mutex_unlock(&ab->access_mutex);
-	}
-	return err;
-}
-
-static int
-set_register_interruptible(struct ab5500 *ab, u8 bank, u8 reg, u8 value)
-{
-	return ab5500_mask_and_set_register_interruptible_raw(ab, bank, reg,
-							      0xff, value);
-}
-
-/*
- * Read/write permission checking functions.
- */
-static const struct ab5500_i2c_ranges *get_bankref(u8 devid, u8 bank)
-{
-	u8 i;
-
-	if (devid < AB5500_NUM_DEVICES) {
-		for (i = 0; i < ab5500_bank_ranges[devid].nbanks; i++) {
-			if (ab5500_bank_ranges[devid].bank[i].bankid == bank)
-				return &ab5500_bank_ranges[devid].bank[i];
-		}
-	}
-	return NULL;
-}
-
-static bool page_write_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg)
-{
-	u8 i; /* range loop index */
-	const struct ab5500_i2c_ranges *bankref;
-
-	bankref = get_bankref(devid, bank);
-	if (bankref == NULL || last_reg < first_reg)
-		return false;
-
-	for (i = 0; i < bankref->nranges; i++) {
-		if (first_reg < bankref->range[i].first)
-			break;
-		if ((last_reg <= bankref->range[i].last) &&
-			(bankref->range[i].perm & AB5500_PERM_WR))
-			return true;
-	}
-	return false;
-}
-
-static bool reg_write_allowed(u8 devid, u8 bank, u8 reg)
-{
-	return page_write_allowed(devid, bank, reg, reg);
-}
-
-static bool page_read_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg)
-{
-	u8 i;
-	const struct ab5500_i2c_ranges *bankref;
-
-	bankref = get_bankref(devid, bank);
-	if (bankref == NULL || last_reg < first_reg)
-		return false;
-
-
-	/* Find the range (if it exists in the list) that includes first_reg. */
-	for (i = 0; i < bankref->nranges; i++) {
-		if (first_reg < bankref->range[i].first)
-			return false;
-		if (first_reg <= bankref->range[i].last)
-			break;
-	}
-	/* Make sure that the entire range up to and including last_reg is
-	 * readable. This may span several of the ranges in the list.
-	 */
-	while ((i < bankref->nranges) &&
-		(bankref->range[i].perm & AB5500_PERM_RD)) {
-		if (last_reg <= bankref->range[i].last)
-			return true;
-		if ((++i >= bankref->nranges) ||
-			(bankref->range[i].first !=
-				(bankref->range[i - 1].last + 1))) {
-			break;
-		}
-	}
-	return false;
-}
-
-static bool reg_read_allowed(u8 devid, u8 bank, u8 reg)
-{
-	return page_read_allowed(devid, bank, reg, reg);
-}
-
-
-/*
- * The exported register access functionality.
- */
-static int ab5500_get_chip_id(struct device *dev)
-{
-	struct ab5500 *ab = dev_get_drvdata(dev->parent);
-
-	return (int)ab->chip_id;
-}
-
-static int ab5500_mask_and_set_register_interruptible(struct device *dev,
-		u8 bank, u8 reg, u8 bitmask, u8 bitvalues)
-{
-	struct ab5500 *ab;
-	struct platform_device *pdev = to_platform_device(dev);
-
-	if ((AB5500_NUM_BANKS <= bank) ||
-		!reg_write_allowed(pdev->id, bank, reg))
-		return -EINVAL;
-
-	ab = dev_get_drvdata(dev->parent);
-	return ab5500_mask_and_set_register_interruptible_raw(ab, bank, reg,
-		bitmask, bitvalues);
-}
-
-static int ab5500_set_register_interruptible(struct device *dev, u8 bank,
-	u8 reg, u8 value)
-{
-	return ab5500_mask_and_set_register_interruptible(dev, bank, reg, 0xFF,
-		value);
-}
-
-static int ab5500_get_register_interruptible(struct device *dev, u8 bank,
-		u8 reg, u8 *value)
-{
-	struct ab5500 *ab;
-	struct platform_device *pdev = to_platform_device(dev);
-
-	if ((AB5500_NUM_BANKS <= bank) ||
-		!reg_read_allowed(pdev->id, bank, reg))
-		return -EINVAL;
-
-	ab = dev_get_drvdata(dev->parent);
-	return ab5500_get_register_interruptible_raw(ab, bank, reg, value);
-}
-
-static int ab5500_get_register_page_interruptible(struct device *dev, u8 bank,
-		u8 first_reg, u8 *regvals, u8 numregs)
-{
-	struct ab5500 *ab;
-	struct platform_device *pdev = to_platform_device(dev);
-
-	if ((AB5500_NUM_BANKS <= bank) ||
-		!page_read_allowed(pdev->id, bank,
-			first_reg, (first_reg + numregs - 1)))
-		return -EINVAL;
-
-	ab = dev_get_drvdata(dev->parent);
-	return get_register_page_interruptible(ab, bank, first_reg, regvals,
-		numregs);
-}
-
-static int
-ab5500_event_registers_startup_state_get(struct device *dev, u8 *event)
-{
-	struct ab5500 *ab;
-
-	ab = dev_get_drvdata(dev->parent);
-	if (!ab->startup_events_read)
-		return -EAGAIN; /* Try again later */
-
-	memcpy(event, ab->startup_events, AB5500_NUM_EVENT_REG);
-	return 0;
-}
-
-static struct abx500_ops ab5500_ops = {
-	.get_chip_id = ab5500_get_chip_id,
-	.get_register = ab5500_get_register_interruptible,
-	.set_register = ab5500_set_register_interruptible,
-	.get_register_page = ab5500_get_register_page_interruptible,
-	.set_register_page = NULL,
-	.mask_and_set_register = ab5500_mask_and_set_register_interruptible,
-	.event_registers_startup_state_get =
-		ab5500_event_registers_startup_state_get,
-	.startup_irq_enabled = NULL,
-};
-
-/*
- * ab5500_setup : Basic set-up, datastructure creation/destruction
- *		  and I2C interface.This sets up a default config
- *		  in the AB5500 chip so that it will work as expected.
- * @ab :	  Pointer to ab5500 structure
- * @settings :    Pointer to struct abx500_init_settings
- * @size :        Size of init data
- */
-static int __init ab5500_setup(struct ab5500 *ab,
-	struct abx500_init_settings *settings, unsigned int size)
-{
-	int err = 0;
-	int i;
-
-	for (i = 0; i < size; i++) {
-		err = ab5500_mask_and_set_register_interruptible_raw(ab,
-			settings[i].bank,
-			settings[i].reg,
-			0xFF, settings[i].setting);
-		if (err)
-			goto exit_no_setup;
-
-		/* If event mask register update the event mask in ab5500 */
-		if ((settings[i].bank == AB5500_BANK_IT) &&
-			(AB5500_MASK_BASE <= settings[i].reg) &&
-			(settings[i].reg <= AB5500_MASK_END)) {
-			ab->mask[settings[i].reg - AB5500_MASK_BASE] =
-				settings[i].setting;
-		}
-	}
-exit_no_setup:
-	return err;
-}
-
-struct ab_family_id {
-	u8	id;
-	char	*name;
-};
-
-static const struct ab_family_id ids[] __initdata = {
-	/* AB5500 */
-	{
-		.id = AB5500_1_0,
-		.name = "1.0"
-	},
-	{
-		.id = AB5500_1_1,
-		.name = "1.1"
-	},
-	/* Terminator */
-	{
-		.id = 0x00,
-	}
-};
-
-static int __init ab5500_probe(struct platform_device *pdev)
-{
-	struct ab5500 *ab;
-	struct ab5500_platform_data *ab5500_plf_data =
-		pdev->dev.platform_data;
-	int err;
-	int i;
-
-	ab = kzalloc(sizeof(struct ab5500), GFP_KERNEL);
-	if (!ab) {
-		dev_err(&pdev->dev,
-			"could not allocate ab5500 device\n");
-		return -ENOMEM;
-	}
-
-	/* Initialize data structure */
-	mutex_init(&ab->access_mutex);
-	mutex_init(&ab->irq_lock);
-	ab->dev = &pdev->dev;
-
-	platform_set_drvdata(pdev, ab);
-
-	/* Read chip ID register */
-	err = ab5500_get_register_interruptible_raw(ab,
-					AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP,
-					AB5500_CHIP_ID, &ab->chip_id);
-	if (err) {
-		dev_err(&pdev->dev, "could not communicate with the analog "
-			"baseband chip\n");
-		goto exit_no_detect;
-	}
-
-	for (i = 0; ids[i].id != 0x0; i++) {
-		if (ids[i].id == ab->chip_id) {
-			snprintf(&ab->chip_name[0], sizeof(ab->chip_name) - 1,
-				"AB5500 %s", ids[i].name);
-			break;
-		}
-	}
-	if (ids[i].id == 0x0) {
-		dev_err(&pdev->dev, "unknown analog baseband chip id: 0x%x\n",
-			ab->chip_id);
-		dev_err(&pdev->dev, "driver not started!\n");
-		goto exit_no_detect;
-	}
-
-	/* Clear and mask all interrupts */
-	for (i = 0; i < AB5500_NUM_IRQ_REGS; i++) {
-		u8 latchreg = AB5500_IT_LATCH0_REG + i;
-		u8 maskreg = AB5500_IT_MASK0_REG + i;
-		u8 val;
-
-		ab5500_get_register_interruptible_raw(ab, AB5500_BANK_IT,
-						      latchreg, &val);
-		set_register_interruptible(ab, AB5500_BANK_IT, maskreg, 0xff);
-		ab->mask[i] = ab->oldmask[i] = 0xff;
-	}
-
-	err = abx500_register_ops(&pdev->dev, &ab5500_ops);
-	if (err) {
-		dev_err(&pdev->dev, "ab5500_register ops error\n");
-		goto exit_no_detect;
-	}
-
-	/* Set up and register the platform devices. */
-	for (i = 0; i < AB5500_NUM_DEVICES; i++) {
-		ab5500_devs[i].platform_data = ab5500_plf_data->dev_data[i];
-		ab5500_devs[i].pdata_size =
-			sizeof(ab5500_plf_data->dev_data[i]);
-	}
-
-	err = mfd_add_devices(&pdev->dev, 0, ab5500_devs,
-		ARRAY_SIZE(ab5500_devs), NULL,
-		ab5500_plf_data->irq.base);
-	if (err) {
-		dev_err(&pdev->dev, "ab5500_mfd_add_device error\n");
-		goto exit_no_detect;
-	}
-
-	err = ab5500_setup(ab, ab5500_plf_data->init_settings,
-		ab5500_plf_data->init_settings_sz);
-	if (err) {
-		dev_err(&pdev->dev, "ab5500_setup error\n");
-		goto exit_no_detect;
-	}
-
-	ab5500_setup_debugfs(ab);
-
-	dev_info(&pdev->dev, "detected AB chip: %s\n", &ab->chip_name[0]);
-	return 0;
-
-exit_no_detect:
-	kfree(ab);
-	return err;
-}
-
-static int __exit ab5500_remove(struct platform_device *pdev)
-{
-	struct ab5500 *ab = platform_get_drvdata(pdev);
-
-	ab5500_remove_debugfs();
-	mfd_remove_devices(&pdev->dev);
-	kfree(ab);
-	return 0;
-}
-
-static struct platform_driver ab5500_driver = {
-	.driver = {
-		.name = "ab5500-core",
-		.owner = THIS_MODULE,
-	},
-	.remove  = __exit_p(ab5500_remove),
-};
-
-static int __init ab5500_core_init(void)
-{
-	return platform_driver_probe(&ab5500_driver, ab5500_probe);
-}
-
-static void __exit ab5500_core_exit(void)
-{
-	platform_driver_unregister(&ab5500_driver);
-}
-
-subsys_initcall(ab5500_core_init);
-module_exit(ab5500_core_exit);
-
-MODULE_AUTHOR("Mattias Wallin <mattias.wallin@...ricsson.com>");
-MODULE_DESCRIPTION("AB5500 core driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/ab5500-debugfs.c b/drivers/mfd/ab5500-debugfs.c
deleted file mode 100644
index 7200694..0000000
--- a/drivers/mfd/ab5500-debugfs.c
+++ /dev/null
@@ -1,807 +0,0 @@
-/*
- * Copyright (C) 2011 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * Debugfs support for the AB5500 MFD driver
- */
-
-#include <linux/module.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/mfd/abx500.h>
-#include <linux/mfd/abx500/ab5500.h>
-#include <linux/uaccess.h>
-
-#include "ab5500-core.h"
-#include "ab5500-debugfs.h"
-
-static struct ab5500_i2c_ranges ab5500_reg_ranges[AB5500_NUM_BANKS] = {
-	[AB5500_BANK_LED] = {
-		.bankid = AB5500_BANK_LED,
-		.nranges = 1,
-		.range = (struct ab5500_reg_range[]) {
-			{
-				.first = 0x00,
-				.last = 0x0C,
-				.perm = AB5500_PERM_RW,
-			},
-		},
-	},
-	[AB5500_BANK_ADC] = {
-		.bankid = AB5500_BANK_ADC,
-		.nranges = 6,
-		.range = (struct ab5500_reg_range[]) {
-			{
-				.first = 0x1F,
-				.last = 0x22,
-				.perm = AB5500_PERM_RO,
-			},
-			{
-				.first = 0x23,
-				.last = 0x24,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x26,
-				.last = 0x2D,
-				.perm = AB5500_PERM_RO,
-			},
-			{
-				.first = 0x2F,
-				.last = 0x34,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x37,
-				.last = 0x57,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x58,
-				.last = 0x58,
-				.perm = AB5500_PERM_RO,
-			},
-		},
-	},
-	[AB5500_BANK_RTC] = {
-		.bankid = AB5500_BANK_RTC,
-		.nranges = 2,
-		.range = (struct ab5500_reg_range[]) {
-			{
-				.first = 0x00,
-				.last = 0x04,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x06,
-				.last = 0x0C,
-				.perm = AB5500_PERM_RW,
-			},
-		},
-	},
-	[AB5500_BANK_STARTUP] = {
-		.bankid = AB5500_BANK_STARTUP,
-		.nranges = 12,
-		.range = (struct ab5500_reg_range[]) {
-			{
-				.first = 0x00,
-				.last = 0x01,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x1F,
-				.last = 0x1F,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x2E,
-				.last = 0x2E,
-				.perm = AB5500_PERM_RO,
-			},
-			{
-				.first = 0x2F,
-				.last = 0x30,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x50,
-				.last = 0x51,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x60,
-				.last = 0x61,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x66,
-				.last = 0x8A,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x8C,
-				.last = 0x96,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0xAA,
-				.last = 0xB4,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0xB7,
-				.last = 0xBF,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0xC1,
-				.last = 0xCA,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0xD3,
-				.last = 0xE0,
-				.perm = AB5500_PERM_RW,
-			},
-		},
-	},
-	[AB5500_BANK_DBI_ECI] = {
-		.bankid = AB5500_BANK_DBI_ECI,
-		.nranges = 3,
-		.range = (struct ab5500_reg_range[]) {
-			{
-				.first = 0x00,
-				.last = 0x07,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x10,
-				.last = 0x10,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x13,
-				.last = 0x13,
-				.perm = AB5500_PERM_RW,
-			},
-		},
-	},
-	[AB5500_BANK_CHG] = {
-		.bankid = AB5500_BANK_CHG,
-		.nranges = 2,
-		.range = (struct ab5500_reg_range[]) {
-			{
-				.first = 0x11,
-				.last = 0x11,
-				.perm = AB5500_PERM_RO,
-			},
-			{
-				.first = 0x12,
-				.last = 0x1B,
-				.perm = AB5500_PERM_RW,
-			},
-		},
-	},
-	[AB5500_BANK_FG_BATTCOM_ACC] = {
-		.bankid = AB5500_BANK_FG_BATTCOM_ACC,
-		.nranges = 2,
-		.range = (struct ab5500_reg_range[]) {
-			{
-				.first = 0x00,
-				.last = 0x0B,
-				.perm = AB5500_PERM_RO,
-			},
-			{
-				.first = 0x0C,
-				.last = 0x10,
-				.perm = AB5500_PERM_RW,
-			},
-		},
-	},
-	[AB5500_BANK_USB] = {
-		.bankid = AB5500_BANK_USB,
-		.nranges = 12,
-		.range = (struct ab5500_reg_range[]) {
-			{
-				.first = 0x01,
-				.last = 0x01,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x80,
-				.last = 0x83,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x87,
-				.last = 0x8A,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x8B,
-				.last = 0x8B,
-				.perm = AB5500_PERM_RO,
-			},
-			{
-				.first = 0x91,
-				.last = 0x92,
-				.perm = AB5500_PERM_RO,
-			},
-			{
-				.first = 0x93,
-				.last = 0x93,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x94,
-				.last = 0x94,
-				.perm = AB5500_PERM_RO,
-			},
-			{
-				.first = 0xA8,
-				.last = 0xB0,
-				.perm = AB5500_PERM_RO,
-			},
-			{
-				.first = 0xB2,
-				.last = 0xB2,
-				.perm = AB5500_PERM_RO,
-			},
-			{
-				.first = 0xB4,
-				.last = 0xBC,
-				.perm = AB5500_PERM_RO,
-			},
-			{
-				.first = 0xBF,
-				.last = 0xBF,
-				.perm = AB5500_PERM_RO,
-			},
-			{
-				.first = 0xC1,
-				.last = 0xC5,
-				.perm = AB5500_PERM_RO,
-			},
-		},
-	},
-	[AB5500_BANK_IT] = {
-		.bankid = AB5500_BANK_IT,
-		.nranges = 4,
-		.range = (struct ab5500_reg_range[]) {
-			{
-				.first = 0x00,
-				.last = 0x02,
-				.perm = AB5500_PERM_RO,
-			},
-			{
-				.first = 0x20,
-				.last = 0x36,
-				.perm = AB5500_PERM_RO,
-			},
-			{
-				.first = 0x40,
-				.last = 0x56,
-				.perm = AB5500_PERM_RO,
-			},
-			{
-				.first = 0x60,
-				.last = 0x76,
-				.perm = AB5500_PERM_RO,
-			},
-		},
-	},
-	[AB5500_BANK_VDDDIG_IO_I2C_CLK_TST] = {
-		.bankid = AB5500_BANK_VDDDIG_IO_I2C_CLK_TST,
-		.nranges = 7,
-		.range = (struct ab5500_reg_range[]) {
-			{
-				.first = 0x02,
-				.last = 0x02,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x12,
-				.last = 0x12,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x30,
-				.last = 0x34,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x40,
-				.last = 0x44,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x50,
-				.last = 0x54,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x60,
-				.last = 0x64,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x70,
-				.last = 0x74,
-				.perm = AB5500_PERM_RW,
-			},
-		},
-	},
-	[AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP] = {
-		.bankid = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP,
-		.nranges = 13,
-		.range = (struct ab5500_reg_range[]) {
-			{
-				.first = 0x01,
-				.last = 0x01,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x02,
-				.last = 0x02,
-				.perm = AB5500_PERM_RO,
-			},
-			{
-				.first = 0x0D,
-				.last = 0x0F,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x1C,
-				.last = 0x1C,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x1E,
-				.last = 0x1E,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x20,
-				.last = 0x21,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x25,
-				.last = 0x25,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x28,
-				.last = 0x2A,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x30,
-				.last = 0x33,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x40,
-				.last = 0x43,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x50,
-				.last = 0x53,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x60,
-				.last = 0x63,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x70,
-				.last = 0x73,
-				.perm = AB5500_PERM_RW,
-			},
-		},
-	},
-	[AB5500_BANK_VIBRA] = {
-		.bankid = AB5500_BANK_VIBRA,
-		.nranges = 2,
-		.range = (struct ab5500_reg_range[]) {
-			{
-				.first = 0x10,
-				.last = 0x13,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0xFE,
-				.last = 0xFE,
-				.perm = AB5500_PERM_RW,
-			},
-		},
-	},
-	[AB5500_BANK_AUDIO_HEADSETUSB] = {
-		.bankid = AB5500_BANK_AUDIO_HEADSETUSB,
-		.nranges = 2,
-		.range = (struct ab5500_reg_range[]) {
-			{
-				.first = 0x00,
-				.last = 0x48,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0xEB,
-				.last = 0xFB,
-				.perm = AB5500_PERM_RW,
-			},
-		},
-	},
-	[AB5500_BANK_SIM_USBSIM] = {
-		.bankid = AB5500_BANK_SIM_USBSIM,
-		.nranges = 1,
-		.range = (struct ab5500_reg_range[]) {
-			{
-				.first = 0x13,
-				.last = 0x19,
-				.perm = AB5500_PERM_RW,
-			},
-		},
-	},
-	[AB5500_BANK_VDENC] = {
-		.bankid = AB5500_BANK_VDENC,
-		.nranges = 12,
-		.range = (struct ab5500_reg_range[]) {
-			{
-				.first = 0x00,
-				.last = 0x08,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x09,
-				.last = 0x09,
-				.perm = AB5500_PERM_RO,
-			},
-			{
-				.first = 0x0A,
-				.last = 0x12,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x15,
-				.last = 0x19,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x1B,
-				.last = 0x21,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x27,
-				.last = 0x2C,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x41,
-				.last = 0x41,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x45,
-				.last = 0x5B,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x5D,
-				.last = 0x5D,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x69,
-				.last = 0x69,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x6C,
-				.last = 0x6D,
-				.perm = AB5500_PERM_RW,
-			},
-			{
-				.first = 0x80,
-				.last = 0x81,
-				.perm = AB5500_PERM_RW,
-			},
-		},
-	},
-};
-
-static int ab5500_registers_print(struct seq_file *s, void *p)
-{
-	struct ab5500 *ab = s->private;
-	unsigned int i;
-	u8 bank = (u8)ab->debug_bank;
-
-	seq_printf(s, "ab5500 register values:\n");
-	for (bank = 0; bank < AB5500_NUM_BANKS; bank++) {
-		seq_printf(s, " bank %u, %s (0x%x):\n", bank,
-				bankinfo[bank].name,
-				bankinfo[bank].slave_addr);
-		for (i = 0; i < ab5500_reg_ranges[bank].nranges; i++) {
-			u8 reg;
-			int err;
-
-			for (reg = ab5500_reg_ranges[bank].range[i].first;
-				reg <= ab5500_reg_ranges[bank].range[i].last;
-				reg++) {
-				u8 value;
-
-				err = ab5500_get_register_interruptible_raw(ab,
-								bank, reg,
-								&value);
-				if (err < 0) {
-					dev_err(ab->dev, "get_reg failed %d"
-						"bank 0x%x reg 0x%x\n",
-						err, bank, reg);
-					return err;
-				}
-
-				err = seq_printf(s, "[%d/0x%02X]: 0x%02X\n",
-						bank, reg, value);
-				if (err < 0) {
-					dev_err(ab->dev,
-						"seq_printf overflow\n");
-					/*
-					 * Error is not returned here since
-					 * the output is wanted in any case
-					 */
-					return 0;
-				}
-			}
-		}
-	}
-	return 0;
-}
-
-static int ab5500_registers_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ab5500_registers_print, inode->i_private);
-}
-
-static const struct file_operations ab5500_registers_fops = {
-	.open = ab5500_registers_open,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
-static int ab5500_bank_print(struct seq_file *s, void *p)
-{
-	struct ab5500 *ab = s->private;
-
-	seq_printf(s, "%d\n", ab->debug_bank);
-	return 0;
-}
-
-static int ab5500_bank_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ab5500_bank_print, inode->i_private);
-}
-
-static ssize_t ab5500_bank_write(struct file *file,
-	const char __user *user_buf,
-	size_t count, loff_t *ppos)
-{
-	struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private;
-	char buf[32];
-	int buf_size;
-	unsigned long user_bank;
-	int err;
-
-	/* Get userspace string and assure termination */
-	buf_size = min(count, (sizeof(buf) - 1));
-	if (copy_from_user(buf, user_buf, buf_size))
-		return -EFAULT;
-	buf[buf_size] = 0;
-
-	err = strict_strtoul(buf, 0, &user_bank);
-	if (err)
-		return -EINVAL;
-
-	if (user_bank >= AB5500_NUM_BANKS) {
-		dev_err(ab->dev,
-			"debugfs error input > number of banks\n");
-		return -EINVAL;
-	}
-
-	ab->debug_bank = user_bank;
-
-	return buf_size;
-}
-
-static int ab5500_address_print(struct seq_file *s, void *p)
-{
-	struct ab5500 *ab = s->private;
-
-	seq_printf(s, "0x%02X\n", ab->debug_address);
-	return 0;
-}
-
-static int ab5500_address_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ab5500_address_print, inode->i_private);
-}
-
-static ssize_t ab5500_address_write(struct file *file,
-	const char __user *user_buf,
-	size_t count, loff_t *ppos)
-{
-	struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private;
-	char buf[32];
-	int buf_size;
-	unsigned long user_address;
-	int err;
-
-	/* Get userspace string and assure termination */
-	buf_size = min(count, (sizeof(buf) - 1));
-	if (copy_from_user(buf, user_buf, buf_size))
-		return -EFAULT;
-	buf[buf_size] = 0;
-
-	err = strict_strtoul(buf, 0, &user_address);
-	if (err)
-		return -EINVAL;
-	if (user_address > 0xff) {
-		dev_err(ab->dev,
-			"debugfs error input > 0xff\n");
-		return -EINVAL;
-	}
-	ab->debug_address = user_address;
-	return buf_size;
-}
-
-static int ab5500_val_print(struct seq_file *s, void *p)
-{
-	struct ab5500 *ab = s->private;
-	int err;
-	u8 regvalue;
-
-	err = ab5500_get_register_interruptible_raw(ab, (u8)ab->debug_bank,
-		(u8)ab->debug_address, &regvalue);
-	if (err) {
-		dev_err(ab->dev, "get_reg failed %d, bank 0x%x"
-			", reg 0x%x\n", err, ab->debug_bank,
-			ab->debug_address);
-		return -EINVAL;
-	}
-	seq_printf(s, "0x%02X\n", regvalue);
-
-	return 0;
-}
-
-static int ab5500_val_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ab5500_val_print, inode->i_private);
-}
-
-static ssize_t ab5500_val_write(struct file *file,
-	const char __user *user_buf,
-	size_t count, loff_t *ppos)
-{
-	struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private;
-	char buf[32];
-	int buf_size;
-	unsigned long user_val;
-	int err;
-	u8 regvalue;
-
-	/* Get userspace string and assure termination */
-	buf_size = min(count, (sizeof(buf)-1));
-	if (copy_from_user(buf, user_buf, buf_size))
-		return -EFAULT;
-	buf[buf_size] = 0;
-
-	err = strict_strtoul(buf, 0, &user_val);
-	if (err)
-		return -EINVAL;
-	if (user_val > 0xff) {
-		dev_err(ab->dev,
-			"debugfs error input > 0xff\n");
-		return -EINVAL;
-	}
-	err = ab5500_mask_and_set_register_interruptible_raw(
-		ab, (u8)ab->debug_bank,
-		(u8)ab->debug_address, 0xFF, (u8)user_val);
-	if (err)
-		return -EINVAL;
-
-	ab5500_get_register_interruptible_raw(ab, (u8)ab->debug_bank,
-		(u8)ab->debug_address, &regvalue);
-	if (err)
-		return -EINVAL;
-
-	return buf_size;
-}
-
-static const struct file_operations ab5500_bank_fops = {
-	.open = ab5500_bank_open,
-	.write = ab5500_bank_write,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
-static const struct file_operations ab5500_address_fops = {
-	.open = ab5500_address_open,
-	.write = ab5500_address_write,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
-static const struct file_operations ab5500_val_fops = {
-	.open = ab5500_val_open,
-	.write = ab5500_val_write,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
-static struct dentry *ab5500_dir;
-static struct dentry *ab5500_reg_file;
-static struct dentry *ab5500_bank_file;
-static struct dentry *ab5500_address_file;
-static struct dentry *ab5500_val_file;
-
-void __init ab5500_setup_debugfs(struct ab5500 *ab)
-{
-	ab->debug_bank = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP;
-	ab->debug_address = AB5500_CHIP_ID;
-
-	ab5500_dir = debugfs_create_dir("ab5500", NULL);
-	if (!ab5500_dir)
-		goto exit_no_debugfs;
-
-	ab5500_reg_file = debugfs_create_file("all-bank-registers",
-		S_IRUGO, ab5500_dir, ab, &ab5500_registers_fops);
-	if (!ab5500_reg_file)
-		goto exit_destroy_dir;
-
-	ab5500_bank_file = debugfs_create_file("register-bank",
-		(S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_bank_fops);
-	if (!ab5500_bank_file)
-		goto exit_destroy_reg;
-
-	ab5500_address_file = debugfs_create_file("register-address",
-		(S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_address_fops);
-	if (!ab5500_address_file)
-		goto exit_destroy_bank;
-
-	ab5500_val_file = debugfs_create_file("register-value",
-		(S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_val_fops);
-	if (!ab5500_val_file)
-		goto exit_destroy_address;
-
-	return;
-
-exit_destroy_address:
-	debugfs_remove(ab5500_address_file);
-exit_destroy_bank:
-	debugfs_remove(ab5500_bank_file);
-exit_destroy_reg:
-	debugfs_remove(ab5500_reg_file);
-exit_destroy_dir:
-	debugfs_remove(ab5500_dir);
-exit_no_debugfs:
-	dev_err(ab->dev, "failed to create debugfs entries.\n");
-	return;
-}
-
-void __exit ab5500_remove_debugfs(void)
-{
-	debugfs_remove(ab5500_val_file);
-	debugfs_remove(ab5500_address_file);
-	debugfs_remove(ab5500_bank_file);
-	debugfs_remove(ab5500_reg_file);
-	debugfs_remove(ab5500_dir);
-}
diff --git a/drivers/mfd/ab5500-debugfs.h b/drivers/mfd/ab5500-debugfs.h
deleted file mode 100644
index 7330a9b..0000000
--- a/drivers/mfd/ab5500-debugfs.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2011 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * Debugfs interface to the AB5500 core driver
- */
-
-#ifdef CONFIG_DEBUG_FS
-
-void ab5500_setup_debugfs(struct ab5500 *ab);
-void ab5500_remove_debugfs(void);
-
-#else /* !CONFIG_DEBUG_FS */
-
-static inline void ab5500_setup_debugfs(struct ab5500 *ab)
-{
-}
-
-static inline void ab5500_remove_debugfs(void)
-{
-}
-
-#endif
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index ee96cd5..1318ca6 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -6,7 +6,7 @@
  *
  * ABX500 core access functions.
  * The abx500 interface is used for the Analog Baseband chip
- * ab3100, ab5500, and ab8500.
+ * ab3100 and ab8500.
  *
  * Author: Mattias Wallin <mattias.wallin@...ricsson.com>
  * Author: Mattias Nilsson <mattias.i.nilsson@...ricsson.com>
@@ -30,9 +30,6 @@ struct device;
 #define AB3100_P1G	0xc6
 #define AB3100_R2A	0xc7
 #define AB3100_R2B	0xc8
-#define AB5500_1_0	0x20
-#define AB5500_1_1	0x21
-#define AB5500_2_0	0x24
 
 /*
  * AB3100, EVENTA1, A2 and A3 event register flags
diff --git a/include/linux/mfd/abx500/ab5500.h b/include/linux/mfd/abx500/ab5500.h
deleted file mode 100644
index 54f820e..0000000
--- a/include/linux/mfd/abx500/ab5500.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson 2011
- *
- * License Terms: GNU General Public License v2
- */
-#ifndef MFD_AB5500_H
-#define MFD_AB5500_H
-
-struct device;
-
-enum ab5500_devid {
-	AB5500_DEVID_ADC,
-	AB5500_DEVID_LEDS,
-	AB5500_DEVID_POWER,
-	AB5500_DEVID_REGULATORS,
-	AB5500_DEVID_SIM,
-	AB5500_DEVID_RTC,
-	AB5500_DEVID_CHARGER,
-	AB5500_DEVID_FUELGAUGE,
-	AB5500_DEVID_VIBRATOR,
-	AB5500_DEVID_CODEC,
-	AB5500_DEVID_USB,
-	AB5500_DEVID_OTP,
-	AB5500_DEVID_VIDEO,
-	AB5500_DEVID_DBIECI,
-	AB5500_DEVID_ONSWA,
-	AB5500_NUM_DEVICES,
-};
-
-enum ab5500_banks {
-	AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP = 0,
-	AB5500_BANK_VDDDIG_IO_I2C_CLK_TST = 1,
-	AB5500_BANK_VDENC = 2,
-	AB5500_BANK_SIM_USBSIM  = 3,
-	AB5500_BANK_LED = 4,
-	AB5500_BANK_ADC  = 5,
-	AB5500_BANK_RTC  = 6,
-	AB5500_BANK_STARTUP  = 7,
-	AB5500_BANK_DBI_ECI  = 8,
-	AB5500_BANK_CHG  = 9,
-	AB5500_BANK_FG_BATTCOM_ACC = 10,
-	AB5500_BANK_USB = 11,
-	AB5500_BANK_IT = 12,
-	AB5500_BANK_VIBRA = 13,
-	AB5500_BANK_AUDIO_HEADSETUSB = 14,
-	AB5500_NUM_BANKS = 15,
-};
-
-enum ab5500_banks_addr {
-	AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP = 0x4A,
-	AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST = 0x4B,
-	AB5500_ADDR_VDENC = 0x06,
-	AB5500_ADDR_SIM_USBSIM  = 0x04,
-	AB5500_ADDR_LED = 0x10,
-	AB5500_ADDR_ADC  = 0x0A,
-	AB5500_ADDR_RTC  = 0x0F,
-	AB5500_ADDR_STARTUP  = 0x03,
-	AB5500_ADDR_DBI_ECI  = 0x07,
-	AB5500_ADDR_CHG  = 0x0B,
-	AB5500_ADDR_FG_BATTCOM_ACC = 0x0C,
-	AB5500_ADDR_USB = 0x05,
-	AB5500_ADDR_IT = 0x0E,
-	AB5500_ADDR_VIBRA = 0x02,
-	AB5500_ADDR_AUDIO_HEADSETUSB = 0x0D,
-};
-
-/*
- * Interrupt register offsets
- * Bank : 0x0E
- */
-#define AB5500_IT_SOURCE0_REG		0x20
-#define AB5500_IT_SOURCE1_REG		0x21
-#define AB5500_IT_SOURCE2_REG		0x22
-#define AB5500_IT_SOURCE3_REG		0x23
-#define AB5500_IT_SOURCE4_REG		0x24
-#define AB5500_IT_SOURCE5_REG		0x25
-#define AB5500_IT_SOURCE6_REG		0x26
-#define AB5500_IT_SOURCE7_REG		0x27
-#define AB5500_IT_SOURCE8_REG		0x28
-#define AB5500_IT_SOURCE9_REG		0x29
-#define AB5500_IT_SOURCE10_REG		0x2A
-#define AB5500_IT_SOURCE11_REG		0x2B
-#define AB5500_IT_SOURCE12_REG		0x2C
-#define AB5500_IT_SOURCE13_REG		0x2D
-#define AB5500_IT_SOURCE14_REG		0x2E
-#define AB5500_IT_SOURCE15_REG		0x2F
-#define AB5500_IT_SOURCE16_REG		0x30
-#define AB5500_IT_SOURCE17_REG		0x31
-#define AB5500_IT_SOURCE18_REG		0x32
-#define AB5500_IT_SOURCE19_REG		0x33
-#define AB5500_IT_SOURCE20_REG		0x34
-#define AB5500_IT_SOURCE21_REG		0x35
-#define AB5500_IT_SOURCE22_REG		0x36
-#define AB5500_IT_SOURCE23_REG		0x37
-
-#define AB5500_NUM_IRQ_REGS		23
-
-/**
- * struct ab5500
- * @access_mutex: lock out concurrent accesses to the AB registers
- * @dev: a pointer to the device struct for this chip driver
- * @ab5500_irq: the analog baseband irq
- * @irq_base: the platform configuration irq base for subdevices
- * @chip_name: name of this chip variant
- * @chip_id: 8 bit chip ID for this chip variant
- * @irq_lock: a lock to protect the mask
- * @abb_events: a local bit mask of the prcmu wakeup events
- * @event_mask: a local copy of the mask event registers
- * @last_event_mask: a copy of the last event_mask written to hardware
- * @startup_events: a copy of the first reading of the event registers
- * @startup_events_read: whether the first events have been read
- */
-struct ab5500 {
-	struct mutex access_mutex;
-	struct device *dev;
-	unsigned int ab5500_irq;
-	unsigned int irq_base;
-	char chip_name[32];
-	u8 chip_id;
-	struct mutex irq_lock;
-	u32 abb_events;
-	u8 mask[AB5500_NUM_IRQ_REGS];
-	u8 oldmask[AB5500_NUM_IRQ_REGS];
-	u8 startup_events[AB5500_NUM_IRQ_REGS];
-	bool startup_events_read;
-#ifdef CONFIG_DEBUG_FS
-	unsigned int debug_bank;
-	unsigned int debug_address;
-#endif
-};
-
-struct ab5500_platform_data {
-	struct {unsigned int base; unsigned int count; } irq;
-	void *dev_data[AB5500_NUM_DEVICES];
-	struct abx500_init_settings *init_settings;
-	unsigned int init_settings_sz;
-	bool pm_power_off;
-};
-
-#endif /* MFD_AB5500_H */
-- 
1.7.9.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists