| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1334660025-20442-1-git-send-email-bryan.wu@canonical.com>
Date: Tue, 17 Apr 2012 18:53:27 +0800
From: Bryan Wu <bryan.wu@...onical.com>
To: linux@....linux.org.uk, rpurdie@...ys.net,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linus.walleij@...aro.org, akpm@...ux-foundation.org,
arnd.bergmann@...aro.org, nicolas.pitre@...aro.org,
tim.gardner@...onical.com
Subject: [PATCH v7 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM
Based on Linus Walleij's ARM LED consolidation work, this patchset introduce a
new generic led trigger for CPU not only for ARM but also for others.
For enabling CPU idle event, CPU arch code should call ledtrig_cpu() stub to
trigger idle start or idle end event.
These patches convert old style LED driver in arch/arm to gpio_led or new led
driver interface. Against linux-next 20120416 and build successfully for all the machines.
Test ledtrig-cpu driver on OMAP4 Panda board.
--
root@...daBoard:~# uname -a
Linux PandaBoard 3.4.0-rc2-next-20120412-00018-g48d39b4 #12 SMP Fri Apr 13 09:35:01 CST 2012 armv7l armv7l armv7l GNU/Linux
root@...daBoard:~# dmesg | grep LED
[ 2.104919] LED trigger cpu0 indicate activity on CPU 0
[ 2.110473] LED trigger cpu1 indicate activity on CPU 1
root@...daBoard:~# cat /sys/class/leds/pandaboard\:\:status1/trigger
none nand-disk mmc0 mmc1 [heartbeat] cpu0 cpu1
root@...daBoard:~# cat /sys/class/leds/pandaboard\:\:status2/trigger
none nand-disk [mmc0] mmc1 heartbeat cpu0 cpu1
root@...daBoard:~# echo cpu0 > /sys/class/leds/pandaboard\:\:status1/trigger
root@...daBoard:~# cat /sys/class/leds/pandaboard\:\:status1/trigger
none nand-disk mmc0 mmc1 heartbeat [cpu0] cpu1
root@...daBoard:~# echo cpu1 > /sys/class/leds/pandaboard\:\:status2/trigger
root@...daBoard:~# cat /sys/class/leds/pandaboard\:\:status2/trigger
none nand-disk mmc0 mmc1 heartbeat cpu0 [cpu1]
Then try some heavy task like dd and use taskset to assign the task to a specific CPU,
LED will turn on or off as expect
root@...daBoard:~# dd if=/dev/zero of=/dev/null &
[1] 1211
root@...daBoard:~# taskset -pc 0 1211
pid 1211's current affinity list: 0,1
pid 1211's new affinity list: 0
root@...daBoard:~# taskset -pc 1 1211
pid 1211's current affinity list: 0
pid 1211's new affinity list: 1
Try to hotplug on CPU 1
root@...daBoard:~# echo 0 > /sys/devices/system/cpu/cpu1/online
root@...daBoard:~# dmesg | tail
[ 6.361541] EXT4-fs (mmcblk0p2): recovery complete
[ 6.376495] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.436614] init: ureadahead main process (763) terminated with status 5
[ 8.114776] udevd[816]: starting version 175
[ 8.507934] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[ 9.777526] init: udev-fallback-graphics main process (1018) terminated with status 1
[ 11.773651] Adding 524232k swap on /SWAP.swap. Priority:-1 extents:13 across:593912k SS
[ 129.723419] init: failsafe main process (1008) killed by TERM signal
[ 6636.388580] [sched_delayed] process 1211 (dd) no longer affine to cpu1
[ 6636.388854] CPU1: shutdown
root@...daBoard:~# echo 1 > /sys/devices/system/cpu/cpu1/online
[ 6656.075897] CPU1: Unknown IPI message 0x1
root@...daBoard:~#
--
Please find these patches here:
git://kernel.ubuntu.com/roc/linux-2.6/.git leds
v6 --> v7:
* add BUILD_BUG_ON() to detect NR_CPUS > 9999
* move out pr_info from the loop as one line message
* add percpu rw_semaphore to protect critical region in ledtrig_cpu_init()
* fix error in English comments
v5 --> v6:
* replace __get_cpu_var() to per_cpu()
* remove smp_processor_id() which is wrong with for_each_possible_cpu()
* test on real OMAP4 Panda board
* add comments about CPU hotplug in the CPU LED trigger driver
v4 --> v5:
* rebase all the patches on top of latest linux-next
* replace on_each_cpu() with for_each_possible_cpu()
* add some description of ledtrig_cpu() API
* remove old leds code from driver nwflash.c, which should use a new led trigger then
* this trigger driver can be built as module now
v3 --> v4:
* fix a typo pointed by Jochen Friedrich
* fix some building errors
* add Reviewed-by and Tested-by into patch log
v2 --> v3:
* almost rewrote the whole ledtrig-cpu driver, which is more simple
* every CPU will have a per-CPU trigger
* cpu trigger can be assigned to any leds
* fix a lockdep issue in led-trigger common code
* other fix according to review
v1 --> v2:
* remove select operations in Kconfig of every machines
* add back supporting of led in core module of mach-integrator
* solidate name scheme in ledtrig-cpu.c
* add comments of CPU_LED_* cpu led events
* fold patches of RealView and Versatile together
* add machine_is_ check during assabet led driver init
* add some Acked-by in patch logs
* remove code for simpad machine in machine-sa11000, since Jochen Friedrich
introduced gpiolib and gpio-led driver for simpad
* on Assabet and Netwinder machine, LED operations is reversed like:
setting bit means turn off leds
clearing bit means turn on leds
* add a new function to read CM_CTRL register for led driver
Bryan Wu (18):
led-triggers: create a trigger for CPU activity
ARM: at91: convert old leds drivers to gpio_led and led_trigger
drivers
ARM: mach-realview and mach-versatile: retire custom LED code
ARM: mach-ks8695: remove leds driver, since nobody use it
ARM: mach-shark: retire custom LED code
ARM: mach-orion5x: convert custom LED code to gpio_led and LED CPU
trigger
ARM: mach-integrator: move CM_CTRL to header file for accessing by
other functions
ARM: mach-integrator: retire custom LED code
ARM: mach-clps711x: retire custom LED code of P720T machine
ARM: mach-ebsa110: retire custom LED code
ARM: mach-footbridge: retire custom LED code
char: nwflash: remove old led event code
ARM: mach-pxa: retire custom LED code
ARM: plat-samsung: remove including old leds event API header file
ARM: mach-pnx4008: remove including old leds event API header file
ARM: mach-omap1: retire custom LED code
ARM: mach-sa1100: retire custom LED code
ARM: use new LEDS CPU trigger stub to replace old one
arch/arm/Kconfig | 53 -----
arch/arm/include/asm/leds.h | 50 -----
arch/arm/kernel/Makefile | 1 -
arch/arm/kernel/leds.c | 121 -----------
arch/arm/kernel/process.c | 6 +-
arch/arm/kernel/time.c | 17 --
arch/arm/mach-at91/board-csb337.c | 3 -
arch/arm/mach-at91/board-ecbat91.c | 18 +-
arch/arm/mach-at91/board-eco920.c | 23 +-
arch/arm/mach-at91/board-kafa.c | 17 +-
arch/arm/mach-at91/board-kb9202.c | 23 +-
arch/arm/mach-at91/board-rm9200dk.c | 3 -
arch/arm/mach-at91/board-rm9200ek.c | 3 -
arch/arm/mach-at91/board-sam9-l9260.c | 23 +-
arch/arm/mach-at91/board-sam9261ek.c | 3 -
arch/arm/mach-at91/board-yl-9200.c | 3 -
arch/arm/mach-at91/include/mach/board.h | 1 -
arch/arm/mach-at91/leds.c | 105 ---------
arch/arm/mach-clps711x/Makefile | 2 -
arch/arm/mach-clps711x/common.c | 1 -
arch/arm/mach-clps711x/include/mach/time.h | 2 -
arch/arm/mach-clps711x/p720t-leds.c | 66 ------
arch/arm/mach-clps711x/p720t.c | 59 ++++++
arch/arm/mach-ebsa110/Makefile | 4 +-
arch/arm/mach-ebsa110/leds.c | 79 ++++---
arch/arm/mach-footbridge/Makefile | 4 -
arch/arm/mach-footbridge/ebsa285-leds.c | 138 ------------
arch/arm/mach-footbridge/ebsa285.c | 79 +++++++
arch/arm/mach-footbridge/netwinder-hw.c | 110 ++++++++--
arch/arm/mach-footbridge/netwinder-leds.c | 138 ------------
arch/arm/mach-integrator/Makefile | 3 +-
arch/arm/mach-integrator/core.c | 3 -
arch/arm/mach-integrator/include/mach/cm.h | 2 +
arch/arm/mach-integrator/leds.c | 158 ++++++++------
arch/arm/mach-ks8695/Makefile | 3 -
arch/arm/mach-ks8695/devices.c | 21 --
arch/arm/mach-ks8695/include/mach/devices.h | 5 -
arch/arm/mach-ks8695/leds.c | 92 --------
arch/arm/mach-omap1/Makefile | 8 -
arch/arm/mach-omap1/board-h2.c | 32 +++
arch/arm/mach-omap1/board-h3.c | 32 +++
arch/arm/mach-omap1/board-osk.c | 33 +++
arch/arm/mach-omap1/leds-h2p2-debug.c | 166 ---------------
arch/arm/mach-omap1/leds-innovator.c | 98 ---------
arch/arm/mach-omap1/leds-osk.c | 113 ----------
arch/arm/mach-omap1/leds.c | 69 ------
arch/arm/mach-omap1/leds.h | 3 -
arch/arm/mach-omap1/time.c | 1 -
arch/arm/mach-omap1/timer32k.c | 1 -
arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c | 1 -
arch/arm/mach-orion5x/rd88f5181l-ge-setup.c | 1 -
arch/arm/mach-orion5x/rd88f5182-setup.c | 72 ++-----
arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c | 1 -
arch/arm/mach-pnx4008/time.c | 1 -
arch/arm/mach-pxa/Makefile | 8 -
arch/arm/mach-pxa/idp.c | 79 +++++++
arch/arm/mach-pxa/leds-idp.c | 115 ----------
arch/arm/mach-pxa/leds-lubbock.c | 124 -----------
arch/arm/mach-pxa/leds-mainstone.c | 119 -----------
arch/arm/mach-pxa/leds.c | 32 ---
arch/arm/mach-pxa/leds.h | 13 --
arch/arm/mach-pxa/lubbock.c | 93 ++++++++
arch/arm/mach-pxa/mainstone.c | 92 ++++++++
arch/arm/mach-realview/core.c | 39 ----
arch/arm/mach-realview/core.h | 2 -
arch/arm/mach-realview/realview_eb.c | 5 -
arch/arm/mach-realview/realview_pb1176.c | 5 -
arch/arm/mach-realview/realview_pb11mp.c | 5 -
arch/arm/mach-realview/realview_pba8.c | 5 -
arch/arm/mach-realview/realview_pbx.c | 5 -
arch/arm/mach-sa1100/Makefile | 9 -
arch/arm/mach-sa1100/assabet.c | 83 ++++++++
arch/arm/mach-sa1100/badge4.c | 30 +++
arch/arm/mach-sa1100/cerf.c | 42 ++++
arch/arm/mach-sa1100/hackkit.c | 32 +++
arch/arm/mach-sa1100/lart.c | 26 +++
arch/arm/mach-sa1100/leds-assabet.c | 113 ----------
arch/arm/mach-sa1100/leds-badge4.c | 110 ----------
arch/arm/mach-sa1100/leds-cerf.c | 109 ----------
arch/arm/mach-sa1100/leds-hackkit.c | 111 ----------
arch/arm/mach-sa1100/leds-lart.c | 100 ---------
arch/arm/mach-sa1100/leds.c | 50 -----
arch/arm/mach-sa1100/leds.h | 13 --
arch/arm/mach-shark/Makefile | 4 +-
arch/arm/mach-shark/core.c | 1 -
arch/arm/mach-shark/leds.c | 226 ++++++++------------
arch/arm/mach-versatile/core.c | 5 -
arch/arm/plat-omap/Kconfig | 3 +-
arch/arm/plat-omap/debug-leds.c | 293 ++++++--------------------
arch/arm/plat-samsung/time.c | 1 -
arch/arm/plat-versatile/Kconfig | 4 +-
arch/arm/plat-versatile/leds.c | 13 +-
drivers/char/nwflash.c | 34 ---
drivers/leds/Kconfig | 10 +
drivers/leds/Makefile | 1 +
drivers/leds/ledtrig-cpu.c | 143 +++++++++++++
include/linux/leds.h | 23 ++
97 files changed, 1415 insertions(+), 2989 deletions(-)
delete mode 100644 arch/arm/include/asm/leds.h
delete mode 100644 arch/arm/kernel/leds.c
delete mode 100644 arch/arm/mach-clps711x/p720t-leds.c
delete mode 100644 arch/arm/mach-footbridge/ebsa285-leds.c
delete mode 100644 arch/arm/mach-footbridge/netwinder-leds.c
delete mode 100644 arch/arm/mach-ks8695/leds.c
delete mode 100644 arch/arm/mach-omap1/leds-h2p2-debug.c
delete mode 100644 arch/arm/mach-omap1/leds-innovator.c
delete mode 100644 arch/arm/mach-omap1/leds-osk.c
delete mode 100644 arch/arm/mach-omap1/leds.c
delete mode 100644 arch/arm/mach-omap1/leds.h
delete mode 100644 arch/arm/mach-pxa/leds-idp.c
delete mode 100644 arch/arm/mach-pxa/leds-lubbock.c
delete mode 100644 arch/arm/mach-pxa/leds-mainstone.c
delete mode 100644 arch/arm/mach-pxa/leds.c
delete mode 100644 arch/arm/mach-pxa/leds.h
delete mode 100644 arch/arm/mach-sa1100/leds-assabet.c
delete mode 100644 arch/arm/mach-sa1100/leds-badge4.c
delete mode 100644 arch/arm/mach-sa1100/leds-cerf.c
delete mode 100644 arch/arm/mach-sa1100/leds-hackkit.c
delete mode 100644 arch/arm/mach-sa1100/leds-lart.c
delete mode 100644 arch/arm/mach-sa1100/leds.c
delete mode 100644 arch/arm/mach-sa1100/leds.h
create mode 100644 drivers/leds/ledtrig-cpu.c
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists