| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1335172497-27720-1-git-send-email-linus.walleij@stericsson.com> Date: Mon, 23 Apr 2012 11:14:57 +0200 From: Linus Walleij <linus.walleij@...ricsson.com> To: <linux-kernel@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org> Cc: Grant Likely <grant.likely@...retlab.ca>, Philippe LANGLAIS <philippe.langlais@...ricsson.com>, Rabin Vincent <rabin.vincent@...ricsson.com>, Jonas Aberg <jonas.aberg@...ricsson.com>, Lee Jones <lee.jones@...aro.org>, Linus Walleij <linus.walleij@...aro.org>, Magnus Templing <magnus.templing@...ricsson.com>, Naveen Kumar Gaddipati <naveen.gaddipati@...ricsson.com> Subject: [PATCH 7/9] ARM: ux500: remove a bunch of internal pull-ups From: Linus Walleij <linus.walleij@...aro.org> The default configuration for a number of I2C and keypad pins was to pull-up. However on most reference designs the electronics already contain external pull-ups which means the internal pull-ups will lower the common resistance and increase power consumption on these lines, and in some reference designs the keypad inputs are not used so this will just cause problems. So remove these pull-ups and add them on demand instead if needed. Signed-off-by: Magnus Templing <magnus.templing@...ricsson.com> Signed-off-by: Naveen Kumar Gaddipati <naveen.gaddipati@...ricsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@...ricsson.com> Signed-off-by: Linus Walleij <linus.walleij@...aro.org> --- arch/arm/mach-ux500/pins-db8500.h | 72 ++++++++++++++++++------------------- 1 file changed, 36 insertions(+), 36 deletions(-) diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h index 8b1d1a7..062c7ac 100644 --- a/arch/arm/mach-ux500/pins-db8500.h +++ b/arch/arm/mach-ux500/pins-db8500.h @@ -35,40 +35,40 @@ #define GPIO4_GPIO PIN_CFG(4, GPIO) #define GPIO4_U1_RXD PIN_CFG(4, ALT_A) -#define GPIO4_I2C4_SCL PIN_CFG_INPUT(4, ALT_B, PULLUP) +#define GPIO4_I2C4_SCL PIN_CFG(4, ALT_B) #define GPIO4_IP_TRSTn PIN_CFG(4, ALT_C) #define GPIO5_GPIO PIN_CFG(5, GPIO) #define GPIO5_U1_TXD PIN_CFG(5, ALT_A) -#define GPIO5_I2C4_SDA PIN_CFG_INPUT(5, ALT_B, PULLUP) +#define GPIO5_I2C4_SDA PIN_CFG(5, ALT_B) #define GPIO5_IP_GPIO6 PIN_CFG(5, ALT_C) #define GPIO6_GPIO PIN_CFG(6, GPIO) #define GPIO6_U1_CTSn PIN_CFG(6, ALT_A) -#define GPIO6_I2C1_SCL PIN_CFG_INPUT(6, ALT_B, PULLUP) +#define GPIO6_I2C1_SCL PIN_CFG(6, ALT_B) #define GPIO6_IP_GPIO0 PIN_CFG(6, ALT_C) #define GPIO7_GPIO PIN_CFG(7, GPIO) #define GPIO7_U1_RTSn PIN_CFG(7, ALT_A) -#define GPIO7_I2C1_SDA PIN_CFG_INPUT(7, ALT_B, PULLUP) +#define GPIO7_I2C1_SDA PIN_CFG(7, ALT_B) #define GPIO7_IP_GPIO1 PIN_CFG(7, ALT_C) #define GPIO8_GPIO PIN_CFG(8, GPIO) -#define GPIO8_IPI2C_SDA PIN_CFG_INPUT(8, ALT_A, PULLUP) -#define GPIO8_I2C2_SDA PIN_CFG_INPUT(8, ALT_B, PULLUP) +#define GPIO8_IPI2C_SDA PIN_CFG(8, ALT_A) +#define GPIO8_I2C2_SDA PIN_CFG(8, ALT_B) #define GPIO9_GPIO PIN_CFG(9, GPIO) -#define GPIO9_IPI2C_SCL PIN_CFG_INPUT(9, ALT_A, PULLUP) -#define GPIO9_I2C2_SCL PIN_CFG_INPUT(9, ALT_B, PULLUP) +#define GPIO9_IPI2C_SCL PIN_CFG(9, ALT_A) +#define GPIO9_I2C2_SCL PIN_CFG(9, ALT_B) #define GPIO10_GPIO PIN_CFG(10, GPIO) -#define GPIO10_IPI2C_SDA PIN_CFG_INPUT(10, ALT_A, PULLUP) -#define GPIO10_I2C2_SDA PIN_CFG_INPUT(10, ALT_B, PULLUP) +#define GPIO10_IPI2C_SDA PIN_CFG(10, ALT_A) +#define GPIO10_I2C2_SDA PIN_CFG(10, ALT_B) #define GPIO10_IP_GPIO3 PIN_CFG(10, ALT_C) #define GPIO11_GPIO PIN_CFG(11, GPIO) -#define GPIO11_IPI2C_SCL PIN_CFG_INPUT(11, ALT_A, PULLUP) -#define GPIO11_I2C2_SCL PIN_CFG_INPUT(11, ALT_B, PULLUP) +#define GPIO11_IPI2C_SCL PIN_CFG(11, ALT_A) +#define GPIO11_I2C2_SCL PIN_CFG(11, ALT_B) #define GPIO11_IP_GPIO2 PIN_CFG(11, ALT_C) #define GPIO12_GPIO PIN_CFG(12, GPIO) @@ -87,12 +87,12 @@ #define GPIO16_GPIO PIN_CFG(16, GPIO) #define GPIO16_MSP0_RFS PIN_CFG(16, ALT_A) -#define GPIO16_I2C1_SCL PIN_CFG_INPUT(16, ALT_B, PULLUP) +#define GPIO16_I2C1_SCL PIN_CFG(16, ALT_B) #define GPIO16_SLIM0_DAT PIN_CFG(16, ALT_C) #define GPIO17_GPIO PIN_CFG(17, GPIO) #define GPIO17_MSP0_RCK PIN_CFG(17, ALT_A) -#define GPIO17_I2C1_SDA PIN_CFG_INPUT(17, ALT_B, PULLUP) +#define GPIO17_I2C1_SDA PIN_CFG(17, ALT_B) #define GPIO17_SLIM0_CLK PIN_CFG(17, ALT_C) #define GPIO18_GPIO PIN_CFG(18, GPIO) @@ -434,10 +434,10 @@ #define GPIO146_SSP0_TXD PIN_CFG(146, ALT_A) #define GPIO147_GPIO PIN_CFG(147, GPIO) -#define GPIO147_I2C0_SCL PIN_CFG_INPUT(147, ALT_A, PULLUP) +#define GPIO147_I2C0_SCL PIN_CFG(147, ALT_A) #define GPIO148_GPIO PIN_CFG(148, GPIO) -#define GPIO148_I2C0_SDA PIN_CFG_INPUT(148, ALT_A, PULLUP) +#define GPIO148_I2C0_SDA PIN_CFG(148, ALT_A) #define GPIO149_GPIO PIN_CFG(149, GPIO) #define GPIO149_IP_GPIO0 PIN_CFG(149, ALT_A) @@ -459,82 +459,82 @@ #define GPIO152_KP_O9 PIN_CFG(152, ALT_C) #define GPIO153_GPIO PIN_CFG(153, GPIO) -#define GPIO153_KP_I7 PIN_CFG_INPUT(153, ALT_A, PULLDOWN) +#define GPIO153_KP_I7 PIN_CFG(153, ALT_A) #define GPIO153_LCD_D24 PIN_CFG(153, ALT_B) #define GPIO153_U2_RXD PIN_CFG(153, ALT_C) #define GPIO154_GPIO PIN_CFG(154, GPIO) -#define GPIO154_KP_I6 PIN_CFG_INPUT(154, ALT_A, PULLDOWN) +#define GPIO154_KP_I6 PIN_CFG(154, ALT_A) #define GPIO154_LCD_D25 PIN_CFG(154, ALT_B) #define GPIO154_U2_TXD PIN_CFG(154, ALT_C) #define GPIO155_GPIO PIN_CFG(155, GPIO) -#define GPIO155_KP_I5 PIN_CFG_INPUT(155, ALT_A, PULLDOWN) +#define GPIO155_KP_I5 PIN_CFG(155, ALT_A) #define GPIO155_LCD_D26 PIN_CFG(155, ALT_B) #define GPIO155_STMAPE_CLK PIN_CFG(155, ALT_C) #define GPIO156_GPIO PIN_CFG(156, GPIO) -#define GPIO156_KP_I4 PIN_CFG_INPUT(156, ALT_A, PULLDOWN) +#define GPIO156_KP_I4 PIN_CFG(156, ALT_A) #define GPIO156_LCD_D27 PIN_CFG(156, ALT_B) #define GPIO156_STMAPE_DAT3 PIN_CFG(156, ALT_C) #define GPIO157_GPIO PIN_CFG(157, GPIO) -#define GPIO157_KP_O7 PIN_CFG_INPUT(157, ALT_A, PULLUP) +#define GPIO157_KP_O7 PIN_CFG(157, ALT_A) #define GPIO157_LCD_D28 PIN_CFG(157, ALT_B) #define GPIO157_STMAPE_DAT2 PIN_CFG(157, ALT_C) #define GPIO158_GPIO PIN_CFG(158, GPIO) -#define GPIO158_KP_O6 PIN_CFG_INPUT(158, ALT_A, PULLUP) +#define GPIO158_KP_O6 PIN_CFG(158, ALT_A) #define GPIO158_LCD_D29 PIN_CFG(158, ALT_B) #define GPIO158_STMAPE_DAT1 PIN_CFG(158, ALT_C) #define GPIO159_GPIO PIN_CFG(159, GPIO) -#define GPIO159_KP_O5 PIN_CFG_INPUT(159, ALT_A, PULLUP) +#define GPIO159_KP_O5 PIN_CFG(159, ALT_A) #define GPIO159_LCD_D30 PIN_CFG(159, ALT_B) #define GPIO159_STMAPE_DAT0 PIN_CFG(159, ALT_C) #define GPIO160_GPIO PIN_CFG(160, GPIO) -#define GPIO160_KP_O4 PIN_CFG_INPUT(160, ALT_A, PULLUP) +#define GPIO160_KP_O4 PIN_CFG(160, ALT_A) #define GPIO160_LCD_D31 PIN_CFG(160, ALT_B) #define GPIO160_NONE PIN_CFG(160, ALT_C) #define GPIO161_GPIO PIN_CFG(161, GPIO) -#define GPIO161_KP_I3 PIN_CFG_INPUT(161, ALT_A, PULLDOWN) +#define GPIO161_KP_I3 PIN_CFG(161, ALT_A) #define GPIO161_LCD_D32 PIN_CFG(161, ALT_B) #define GPIO161_UARTMOD_RXD PIN_CFG(161, ALT_C) #define GPIO162_GPIO PIN_CFG(162, GPIO) -#define GPIO162_KP_I2 PIN_CFG_INPUT(162, ALT_A, PULLDOWN) +#define GPIO162_KP_I2 PIN_CFG(162, ALT_A) #define GPIO162_LCD_D33 PIN_CFG(162, ALT_B) #define GPIO162_UARTMOD_TXD PIN_CFG(162, ALT_C) #define GPIO163_GPIO PIN_CFG(163, GPIO) -#define GPIO163_KP_I1 PIN_CFG_INPUT(163, ALT_A, PULLDOWN) +#define GPIO163_KP_I1 PIN_CFG(163, ALT_A) #define GPIO163_LCD_D34 PIN_CFG(163, ALT_B) #define GPIO163_STMMOD_CLK PIN_CFG(163, ALT_C) #define GPIO164_GPIO PIN_CFG(164, GPIO) -#define GPIO164_KP_I0 PIN_CFG_INPUT(164, ALT_A, PULLUP) +#define GPIO164_KP_I0 PIN_CFG(164, ALT_A) #define GPIO164_LCD_D35 PIN_CFG(164, ALT_B) #define GPIO164_STMMOD_DAT3 PIN_CFG(164, ALT_C) #define GPIO165_GPIO PIN_CFG(165, GPIO) -#define GPIO165_KP_O3 PIN_CFG_INPUT(165, ALT_A, PULLUP) +#define GPIO165_KP_O3 PIN_CFG(165, ALT_A) #define GPIO165_LCD_D36 PIN_CFG(165, ALT_B) #define GPIO165_STMMOD_DAT2 PIN_CFG(165, ALT_C) #define GPIO166_GPIO PIN_CFG(166, GPIO) -#define GPIO166_KP_O2 PIN_CFG_INPUT(166, ALT_A, PULLUP) +#define GPIO166_KP_O2 PIN_CFG(166, ALT_A) #define GPIO166_LCD_D37 PIN_CFG(166, ALT_B) #define GPIO166_STMMOD_DAT1 PIN_CFG(166, ALT_C) #define GPIO167_GPIO PIN_CFG(167, GPIO) -#define GPIO167_KP_O1 PIN_CFG_INPUT(167, ALT_A, PULLUP) +#define GPIO167_KP_O1 PIN_CFG(167, ALT_A) #define GPIO167_LCD_D38 PIN_CFG(167, ALT_B) #define GPIO167_STMMOD_DAT0 PIN_CFG(167, ALT_C) #define GPIO168_GPIO PIN_CFG(168, GPIO) -#define GPIO168_KP_O0 PIN_CFG_INPUT(168, ALT_A, PULLUP) +#define GPIO168_KP_O0 PIN_CFG(168, ALT_A) #define GPIO168_LCD_D39 PIN_CFG(168, ALT_B) #define GPIO168_NONE PIN_CFG(168, ALT_C) @@ -637,7 +637,7 @@ #define GPIO216_GPIO PIN_CFG(216, GPIO) #define GPIO216_MC1_DAT2DIR PIN_CFG(216, ALT_A) #define GPIO216_MC3_CMDDIR PIN_CFG(216, ALT_B) -#define GPIO216_I2C3_SDA PIN_CFG_INPUT(216, ALT_C, PULLUP) +#define GPIO216_I2C3_SDA PIN_CFG(216, ALT_C) #define GPIO216_SPI2_FRM PIN_CFG(216, ALT_C) #define GPIO217_GPIO PIN_CFG(217, GPIO) @@ -649,7 +649,7 @@ #define GPIO218_GPIO PIN_CFG(218, GPIO) #define GPIO218_MC1_DAT31DIR PIN_CFG(218, ALT_A) #define GPIO218_MC3_DAT0DIR PIN_CFG(218, ALT_B) -#define GPIO218_I2C3_SCL PIN_CFG_INPUT(218, ALT_C, PULLUP) +#define GPIO218_I2C3_SCL PIN_CFG(218, ALT_C) #define GPIO218_SPI2_RXD PIN_CFG(218, ALT_C) #define GPIO219_GPIO PIN_CFG(219, GPIO) @@ -698,12 +698,12 @@ #define GPIO229_GPIO PIN_CFG(229, GPIO) #define GPIO229_CLKOUT1 PIN_CFG(229, ALT_A) #define GPIO229_PWL PIN_CFG(229, ALT_B) -#define GPIO229_I2C3_SDA PIN_CFG_INPUT(229, ALT_C, PULLUP) +#define GPIO229_I2C3_SDA PIN_CFG(229, ALT_C) #define GPIO230_GPIO PIN_CFG(230, GPIO) #define GPIO230_CLKOUT2 PIN_CFG(230, ALT_A) #define GPIO230_PWL PIN_CFG(230, ALT_B) -#define GPIO230_I2C3_SCL PIN_CFG_INPUT(230, ALT_C, PULLUP) +#define GPIO230_I2C3_SCL PIN_CFG(230, ALT_C) #define GPIO256_GPIO PIN_CFG(256, GPIO) #define GPIO256_USB_NXT PIN_CFG(256, ALT_A) -- 1.7.9.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists