| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1335191812-17071-1-git-send-email-justinmattock@gmail.com>
Date: Mon, 23 Apr 2012 07:36:52 -0700
From: "Justin P. Mattock" <justinmattock@...il.com>
To: gregkh@...uxfoundation.org
Cc: seanm@...nm.ca, Larry.Finger@...inger.net,
linux-kernel@...r.kernel.org, devel@...verdev.osuosl.org,
"Justin P. Mattock" <justinmattock@...il.com>
Subject: [PATCH NEXT]staging: rtl8192e: Fix typos.
From: "Justin P. Mattock" <justinmattock@...il.com>
Signed-off-by: Justin P. Mattock <justinmattock@...il.com>
---
The below patch fixes some typos that I found while doing a little bit of reading in the
staging directory.
drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h | 4 +-
drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 2 +-
drivers/staging/rtl8192e/rtl8192e/rtl_dm.c | 2 +-
drivers/staging/rtl8192e/rtllib.h | 18 ++++++------
drivers/staging/rtl8192e/rtllib_rx.c | 4 +-
drivers/staging/rtl8192e/rtllib_softmac.c | 32 ++++++++++----------
drivers/staging/rtl8192e/rtllib_softmac_wx.c | 4 +-
drivers/staging/rtl8192e/rtllib_tx.c | 6 ++--
drivers/staging/rtl8192e/rtllib_wx.c | 2 +-
9 files changed, 37 insertions(+), 37 deletions(-)
diff --git a/drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h b/drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h
index d5de279..970298b 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h
+++ b/drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h
@@ -306,7 +306,7 @@
#define bRFStart 0x0000f000
#define bBBStart 0x000000f0
#define bBBCCKStart 0x0000000f
-/* Reg)x814 */
+/* Reg x814 */
#define bPAEnd 0xf
#define bTREnd 0x0f000000
#define bRFEnd 0x000f0000
@@ -844,7 +844,7 @@
#define bRTL8258_RxLPFBW 0xc00
#define bRTL8258_RSSILPFBW 0xc0
-/* byte endable for sb_write */
+/* byte enable for sb_write */
#define bByte0 0x1
#define bByte1 0x2
#define bByte2 0x4
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
index 7c676c2..97a5f49 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
@@ -1025,7 +1025,7 @@ static int rtl8192_sta_down(struct net_device *dev, bool shutdownrf)
break;
}
RT_TRACE(COMP_DBG, "===>%s():RF is in progress, need to wait "
- "until rf chang is done.\n", __func__);
+ "until rf change is done.\n", __func__);
mdelay(1);
RFInProgressTimeOut++;
spin_lock_irqsave(&priv->rf_ps_lock, flags);
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c b/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
index f026b71..2dfb0f0 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
@@ -493,7 +493,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)
if (priv->bResetInProgress) {
RT_TRACE(COMP_POWER_TRACKING,
- "we are in slient reset progress, so return\n");
+ "we are in silent reset progress, so return\n");
write_nic_byte(dev, Pw_Track_Flag, 0);
write_nic_byte(dev, FW_Busy_Flag, 0);
return;
diff --git a/drivers/staging/rtl8192e/rtllib.h b/drivers/staging/rtl8192e/rtllib.h
index e26aec8..d7460ae 100644
--- a/drivers/staging/rtl8192e/rtllib.h
+++ b/drivers/staging/rtl8192e/rtllib.h
@@ -169,7 +169,7 @@ struct cb_desc {
u8 nStuckCount;
- /* Tx Firmware Relaged flags (10-11)*/
+ /* Tx Firmware Related flags (10-11)*/
u8 bCTSEnable:1;
u8 bRTSEnable:1;
u8 bUseShortGI:1;
@@ -1690,7 +1690,7 @@ enum rtllib_state {
/* the association procedure is sending AUTH request*/
RTLLIB_ASSOCIATING_AUTHENTICATING,
- /* the association procedure has successfully authentcated
+ /* the association procedure has successfully authenticated
* and is sending association request
*/
RTLLIB_ASSOCIATING_AUTHENTICATED,
@@ -2409,7 +2409,7 @@ struct rtllib_device {
/* used instead of hard_start_xmit (not softmac_hard_start_xmit)
* if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
- * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
+ * frames. If the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
* then also management frames are sent via this callback.
* This function can't sleep.
*/
@@ -2422,12 +2422,12 @@ struct rtllib_device {
*/
void (*data_hard_stop)(struct net_device *dev);
- /* OK this is complementar to data_poll_hard_stop */
+ /* OK this is complementing to data_poll_hard_stop */
void (*data_hard_resume)(struct net_device *dev);
/* ask to the driver to retune the radio .
* This function can sleep. the driver should ensure
- * the radio has been swithced before return.
+ * the radio has been switched before return.
*/
void (*set_chan)(struct net_device *dev, short ch);
@@ -2438,7 +2438,7 @@ struct rtllib_device {
* The syncro version is similar to the start_scan but
* does not return until all channels has been scanned.
* this is called in user context and should sleep,
- * it is called in a work_queue when swithcing to ad-hoc mode
+ * it is called in a work_queue when switching to ad-hoc mode
* or in behalf of iwlist scan when the card is associated
* and root user ask for a scan.
* the fucntion stop_scan should stop both the syncro and
@@ -2481,7 +2481,7 @@ struct rtllib_device {
struct rtllib_network *network);
- /* check whether Tx hw resouce available */
+ /* check whether Tx hw resource available */
short (*check_nic_enough_desc)(struct net_device *dev, int queue_index);
short (*get_nic_desc_num)(struct net_device *dev, int queue_index);
void (*SetBWModeHandler)(struct net_device *dev,
@@ -2543,10 +2543,10 @@ struct rtllib_device {
/* Generate probe requests */
#define IEEE_SOFTMAC_PROBERQ (1<<4)
-/* Generate respones to probe requests */
+/* Generate response to probe requests */
#define IEEE_SOFTMAC_PROBERS (1<<5)
-/* The ieee802.11 stack will manages the netif queue
+/* The ieee802.11 stack will manage the netif queue
* wake/stop for the driver, taking care of 802.11
* fragmentation. See softmac.c for details. */
#define IEEE_SOFTMAC_TX_QUEUE (1<<7)
diff --git a/drivers/staging/rtl8192e/rtllib_rx.c b/drivers/staging/rtl8192e/rtllib_rx.c
index 13979b5..40a59c9 100644
--- a/drivers/staging/rtl8192e/rtllib_rx.c
+++ b/drivers/staging/rtl8192e/rtllib_rx.c
@@ -496,7 +496,7 @@ void rtllib_indicate_packets(struct rtllib_device *ieee, struct rtllib_rxb **prx
memcpy(skb_push(sub_skb, ETH_ALEN), prxb->dst, ETH_ALEN);
}
- /* Indicat the packets to upper layer */
+ /* Indicate the packets to upper layer */
if (sub_skb) {
stats->rx_packets++;
stats->rx_bytes += sub_skb->len;
@@ -1233,7 +1233,7 @@ static void rtllib_rx_indicate_pkt_legacy(struct rtllib_device *ieee,
if (is_multicast_ether_addr(dst))
ieee->stats.multicast++;
- /* Indicat the packets to upper layer */
+ /* Indicate the packets to upper layer */
memset(sub_skb->cb, 0, sizeof(sub_skb->cb));
sub_skb->protocol = eth_type_trans(sub_skb, dev);
sub_skb->dev = dev;
diff --git a/drivers/staging/rtl8192e/rtllib_softmac.c b/drivers/staging/rtl8192e/rtllib_softmac.c
index c5a15db..236477d 100644
--- a/drivers/staging/rtl8192e/rtllib_softmac.c
+++ b/drivers/staging/rtl8192e/rtllib_softmac.c
@@ -31,7 +31,7 @@ short rtllib_is_shortslot(const struct rtllib_network *net)
return net->capability & WLAN_CAPABILITY_SHORT_SLOT_TIME;
}
-/* returns the total length needed for pleacing the RATE MFIE
+/* returns the total length needed for placing the RATE MFIE
* tag and the EXTENDED RATE MFIE tag if needed.
* It encludes two bytes per tag for the tag itself and its len
*/
@@ -49,7 +49,7 @@ static unsigned int rtllib_MFIE_rate_len(struct rtllib_device *ieee)
return rate_len;
}
-/* pleace the MFIE rate, tag to the memory (double) poined.
+/* place the MFIE rate, tag to the memory (double) pointed.
* Then it updates the pointer so that
* it points after the new MFIE tag added.
*/
@@ -557,7 +557,7 @@ void rtllib_softmac_scan_syncro(struct rtllib_device *ieee, u8 is_mesh)
* new network events, despite for updating the net list,
* but we are temporarly 'unlinked' as the driver shall
* not filter RX frames and the channel is changing.
- * So the only situation in witch are interested is to check
+ * So the only situation in which are interested is to check
* if the state become LINKED because of the #1 situation
*/
@@ -1681,7 +1681,7 @@ inline void rtllib_softmac_new_net(struct rtllib_device *ieee,
/* if the user set the AP check if match.
* if the network does not broadcast essid we check the
- * user supplyed ANY essid
+ * user supplied ANY essid
* if the network does broadcast and the user does not set
* essid it is OK
* if the network does broadcast and the user did set essid
@@ -2444,16 +2444,16 @@ inline int rtllib_rx_frame_softmac(struct rtllib_device *ieee,
/* following are for a simplier TX queue management.
* Instead of using netif_[stop/wake]_queue the driver
- * will uses these two function (plus a reset one), that
- * will internally uses the kernel netif_* and takes
+ * will use these two functions (plus a reset one), that
+ * will internally use the kernel netif_* and takes
* care of the ieee802.11 fragmentation.
* So the driver receives a fragment per time and might
- * call the stop function when it want without take care
- * to have enought room to TX an entire packet.
- * This might be useful if each fragment need it's own
+ * call the stop function when it wants to not
+ * have enough room to TX an entire packet.
+ * This might be useful if each fragment needs it's own
* descriptor, thus just keep a total free memory > than
- * the max fragmentation treshold is not enought.. If the
- * ieee802.11 stack passed a TXB struct then you needed
+ * the max fragmentation threshold is not enough.. If the
+ * ieee802.11 stack passed a TXB struct then you need
* to keep N free descriptors where
* N = MAX_PACKET_SIZE / MIN_FRAG_TRESHOLD
* In this way you need just one and the 802.11 stack
@@ -2696,15 +2696,15 @@ static void rtllib_start_ibss_wq(void *data)
rtllib_softmac_check_all_nets(ieee);
- /* if not then the state is not linked. Maybe the user swithced to
+ /* if not then the state is not linked. Maybe the user switched to
* ad-hoc mode just after being in monitor mode, or just after
* being very few time in managed mode (so the card have had no
* time to scan all the chans..) or we have just run up the iface
* after setting ad-hoc mode. So we have to give another try..
* Here, in ibss mode, should be safe to do this without extra care
- * (in bss mode we had to make sure no-one tryed to associate when
+ * (in bss mode we had to make sure no-one tried to associate when
* we had just checked the ieee->state and we was going to start the
- * scan) beacause in ibss mode the rtllib_new_net function, when
+ * scan) because in ibss mode the rtllib_new_net function, when
* finds a good net, just set the ieee->state to RTLLIB_LINKED,
* so, at worst, we waste a bit of time to initiate an unneeded syncro
* scan, that will stop at the first round because it sees the state
@@ -2819,7 +2819,7 @@ void rtllib_start_bss(struct rtllib_device *ieee)
/* ensure no-one start an associating process (thus setting
* the ieee->state to rtllib_ASSOCIATING) while we
- * have just cheked it and we are going to enable scan.
+ * have just checked it and we are going to enable scan.
* The rtllib_new_net function is always called with
* lock held (from both rtllib_softmac_check_all_nets and
* the rx path), so we cannot be in the middle of such function
@@ -2872,7 +2872,7 @@ static void rtllib_associate_retry_wq(void *data)
/* until we do not set the state to RTLLIB_NOLINK
* there are no possibility to have someone else trying
- * to start an association procdure (we get here with
+ * to start an association procedure (we get here with
* ieee->state = RTLLIB_ASSOCIATING).
* When we set the state to RTLLIB_NOLINK it is possible
* that the RX path run an attempt to associate, but
diff --git a/drivers/staging/rtl8192e/rtllib_softmac_wx.c b/drivers/staging/rtl8192e/rtllib_softmac_wx.c
index 1523bc7..1bb6b52 100644
--- a/drivers/staging/rtl8192e/rtllib_softmac_wx.c
+++ b/drivers/staging/rtl8192e/rtllib_softmac_wx.c
@@ -479,7 +479,7 @@ int rtllib_wx_set_essid(struct rtllib_device *ieee,
/* this is just to be sure that the GET wx callback
- * has consisten infos. not needed otherwise
+ * has consistent infos. not needed otherwise
*/
spin_lock_irqsave(&ieee->lock, flags);
@@ -575,7 +575,7 @@ int rtllib_wx_set_power(struct rtllib_device *ieee,
if ((!ieee->sta_wake_up) ||
(!ieee->enter_sleep_state) ||
(!ieee->ps_is_queue_empty)) {
- RTLLIB_DEBUG(RTLLIB_DL_ERR, "%s(): PS mode is tryied to be use "
+ RTLLIB_DEBUG(RTLLIB_DL_ERR, "%s(): PS mode is tried to be use "
"but driver missed a callback\n\n", __func__);
return -1;
}
diff --git a/drivers/staging/rtl8192e/rtllib_tx.c b/drivers/staging/rtl8192e/rtllib_tx.c
index f451bfc..f24aa00c 100644
--- a/drivers/staging/rtl8192e/rtllib_tx.c
+++ b/drivers/staging/rtl8192e/rtllib_tx.c
@@ -59,7 +59,7 @@
802.11 Data Frame
-802.11 frame_contorl for data frames - 2 bytes
+802.11 frame_control for data frames - 2 bytes
,-----------------------------------------------------------------------------------------.
bits | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e |
|----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|------|
@@ -576,7 +576,7 @@ int rtllib_xmit_inter(struct sk_buff *skb, struct net_device *dev)
spin_lock_irqsave(&ieee->lock, flags);
- /* If there is no driver handler to take the TXB, dont' bother
+ /* If there is no driver handler to take the TXB, don't bother
* creating it... */
if ((!ieee->hard_start_xmit && !(ieee->softmac_features &
IEEE_SOFTMAC_TX_QUEUE)) ||
@@ -738,7 +738,7 @@ int rtllib_xmit_inter(struct sk_buff *skb, struct net_device *dev)
(CFG_RTLLIB_COMPUTE_FCS | CFG_RTLLIB_RESERVE_FCS))
bytes_per_frag -= RTLLIB_FCS_LEN;
- /* Each fragment may need to have room for encryptiong
+ /* Each fragment may need to have room for encrypting
* pre/postfix */
if (encrypt) {
bytes_per_frag -= crypt->ops->extra_mpdu_prefix_len +
diff --git a/drivers/staging/rtl8192e/rtllib_wx.c b/drivers/staging/rtl8192e/rtllib_wx.c
index e5fe2e8..c7e8d4d8 100644
--- a/drivers/staging/rtl8192e/rtllib_wx.c
+++ b/drivers/staging/rtl8192e/rtllib_wx.c
@@ -408,7 +408,7 @@ int rtllib_wx_set_encode(struct rtllib_device *ieee,
(*crypt)->priv);
sec.flags |= (1 << key);
/* This ensures a key will be activated if no key is
- * explicitely set */
+ * explicitly set */
if (key == sec.active_key)
sec.flags |= SEC_ACTIVE_KEY;
ieee->crypt_info.tx_keyidx = key;
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists