| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 28 Apr 2012 19:24:20 +0200
From: Florian Fainelli <florian@...nwrt.org>
To: xiong <xiong@....qualcomm.com>
Cc: davem@...emloft.net, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, qca-linux-team@...lcomm.com,
nic-devel@...lcomm.com
Subject: Re: [PATCH 02/10] atl1c: add PHY link event(up/down) patch
Hi Xiong,
Le samedi 28 avril 2012 03:58:37, xiong a écrit :
> On some platforms the PHY settings need to change depending on the
> cable link status to get better stability.
>
> Signed-off-by: xiong <xiong@....qualcomm.com>
> Tested-by: Liu David <dwliu@....qualcomm.com>
> ---
> drivers/net/ethernet/atheros/atl1c/atl1c.h | 1 +
> drivers/net/ethernet/atheros/atl1c/atl1c_hw.c | 37 +++++++++++++++
> drivers/net/ethernet/atheros/atl1c/atl1c_hw.h | 1 +
> drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 55
> +++++++++++++++++++++++ 4 files changed, 94 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c.h
> b/drivers/net/ethernet/atheros/atl1c/atl1c.h index acc2956..b2bf324 100644
> --- a/drivers/net/ethernet/atheros/atl1c/atl1c.h
> +++ b/drivers/net/ethernet/atheros/atl1c/atl1c.h
> @@ -436,6 +436,7 @@ struct atl1c_hw {
> bool phy_configured;
> bool re_autoneg;
> bool emi_ca;
> + bool msi_lnkpatch; /* link patch for specific platforms */
> };
>
> /*
> diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
> b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c index 07f017f..209c179
> 100644
> --- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
> +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
> @@ -848,3 +848,40 @@ int atl1c_power_saving(struct atl1c_hw *hw, u32 wufc)
>
> return 0;
> }
> +
> +
> +/* configure phy after Link change Event */
> +void atl1c_post_phy_linkchg(struct atl1c_hw *hw, u16 link_speed)
> +{
> + u16 phy_val;
> + bool adj_thresh = false;
> +
> + if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l2c_b2 ||
> + hw->nic_type == athr_l1d || hw->nic_type == athr_l1d_2)
> + adj_thresh = true;
> +
> + if (link_speed != SPEED_0) { /* link up */
> + /* az with brcm, half-amp */
> + if (hw->nic_type == athr_l1d_2) {
> + atl1c_read_phy_ext(hw, MIIEXT_PCS, MIIEXT_CLDCTRL6,
> + &phy_val);
> + phy_val = FIELD_GETX(phy_val, CLDCTRL6_CAB_LEN);
> + phy_val = phy_val > CLDCTRL6_CAB_LEN_SHORT ?
> + AZ_ANADECT_LONG : AZ_ANADECT_DEF;
> + atl1c_write_phy_dbg(hw, MIIDBG_AZ_ANADECT, phy_val);
> + }
> + /* threshold adjust */
> + if (adj_thresh && link_speed == SPEED_100 && hw->msi_lnkpatch) {
> + atl1c_write_phy_dbg(hw, MIIDBG_MSE16DB, L1D_MSE16DB_UP);
> + atl1c_write_phy_dbg(hw, MIIDBG_SYSMODCTRL,
> + L1D_SYSMODCTRL_IECHOADJ_DEF);
> + }
> + } else { /* link down */
> + if (adj_thresh && hw->msi_lnkpatch) {
> + atl1c_write_phy_dbg(hw, MIIDBG_SYSMODCTRL,
> + SYSMODCTRL_IECHOADJ_DEF);
> + atl1c_write_phy_dbg(hw, MIIDBG_MSE16DB,
> + L1D_MSE16DB_DOWN);
> + }
> + }
> +}
> diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
> b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h index 0adb341..ea3f520
> 100644
> --- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
> +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h
> @@ -63,6 +63,7 @@ int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr,
> u16 reg_addr, u16 phy_data);
> int atl1c_read_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data);
> int atl1c_write_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 phy_data);
> +void atl1c_post_phy_linkchg(struct atl1c_hw *hw, u16 link_speed);
>
> /* hw-ids */
> #define PCI_DEVICE_ID_ATTANSIC_L2C 0x1062
> diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
> b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index 25b7b00..50df437
> 100644
> --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
> +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
> @@ -258,6 +258,7 @@ static void atl1c_check_link_status(struct
> atl1c_adapter *adapter) if (netif_msg_hw(adapter))
> dev_warn(&pdev->dev, "stop mac failed\n");
> atl1c_set_aspm(hw, SPEED_0);
> + atl1c_post_phy_linkchg(hw, SPEED_0);
> netif_carrier_off(netdev);
> netif_stop_queue(netdev);
> } else {
> @@ -274,6 +275,7 @@ static void atl1c_check_link_status(struct
> atl1c_adapter *adapter) adapter->link_speed = speed;
> adapter->link_duplex = duplex;
> atl1c_set_aspm(hw, speed);
> + atl1c_post_phy_linkchg(hw, speed);
> atl1c_start_mac(adapter);
> if (netif_msg_link(adapter))
> dev_info(&pdev->dev,
> @@ -697,6 +699,57 @@ static int atl1c_setup_mac_funcs(struct atl1c_hw *hw)
> hw->link_cap_flags |= ATL1C_LINK_CAP_1000M;
> return 0;
> }
> +
> +struct atl1c_platform_patch {
> + u16 pci_vid;
> + u16 pci_did;
> + u8 pci_revid;
> + u16 subsystem_vid;
> + u16 subsystem_did;
> + u32 patch_flag;
> +#define ATL1C_LINK_PATCH 0x1
> +};
> +static struct atl1c_platform_patch plats[] = {
This should be static const.
> +{0x1969, 0x2060, 0xC1, 0x1019, 0x8152, 0x1},
> +{0x1969, 0x2060, 0xC1, 0x1019, 0x2060, 0x1},
> +{0x1969, 0x2060, 0xC1, 0x1019, 0xE000, 0x1},
> +{0x1969, 0x2062, 0xC0, 0x1019, 0x8152, 0x1},
> +{0x1969, 0x2062, 0xC0, 0x1019, 0x2062, 0x1},
> +{0x1969, 0x2062, 0xC0, 0x1458, 0xE000, 0x1},
> +{0x1969, 0x2062, 0xC1, 0x1019, 0x8152, 0x1},
> +{0x1969, 0x2062, 0xC1, 0x1019, 0x2062, 0x1},
> +{0x1969, 0x2062, 0xC1, 0x1458, 0xE000, 0x1},
> +{0x1969, 0x2062, 0xC1, 0x1565, 0x2802, 0x1},
> +{0x1969, 0x2062, 0xC1, 0x1565, 0x2801, 0x1},
> +{0x1969, 0x1073, 0xC0, 0x1019, 0x8151, 0x1},
> +{0x1969, 0x1073, 0xC0, 0x1019, 0x1073, 0x1},
> +{0x1969, 0x1073, 0xC0, 0x1458, 0xE000, 0x1},
> +{0x1969, 0x1083, 0xC0, 0x1458, 0xE000, 0x1},
> +{0x1969, 0x1083, 0xC0, 0x1019, 0x8151, 0x1},
> +{0x1969, 0x1083, 0xC0, 0x1019, 0x1083, 0x1},
> +{0x1969, 0x1083, 0xC0, 0x1462, 0x7680, 0x1},
> +{0x1969, 0x1083, 0xC0, 0x1565, 0x2803, 0x1},
> +{0},
Since patch_flag is always set to 0x1, just remove it, if you find a matching
entry, apply the patch. Vendor ID is always the same, remove it as well.
Looking at the supported PCI devices table, this patching table is applicable
to all Atheros PCI device id and none of the Attansic PCI device id, this
suggests that your table should be reversed, and you should only list the
devices *not* needing the patch, this should make the lookup code smaller.
> +};
> +
> +static void __devinit atl1c_patch_assign(struct atl1c_hw *hw)
> +{
> + int i = 0;
> +
> + hw->msi_lnkpatch = false;
> +
> + while (plats[i].pci_vid != 0) {
> + if (plats[i].pci_vid == hw->vendor_id &&
> + plats[i].pci_did == hw->device_id &&
> + plats[i].pci_revid == hw->revision_id &&
> + plats[i].subsystem_vid == hw->subsystem_vendor_id &&
> + plats[i].subsystem_did == hw->subsystem_id) {
> + if (plats[i].patch_flag & ATL1C_LINK_PATCH)
> + hw->msi_lnkpatch = true;
> + }
> + i++;
> + }
> +}
> /*
> * atl1c_sw_init - Initialize general software structures (struct
> atl1c_adapter) * @adapter: board private structure to initialize
> @@ -732,6 +785,8 @@ static int __devinit atl1c_sw_init(struct atl1c_adapter
> *adapter) dev_err(&pdev->dev, "set mac function pointers failed\n");
> return -1;
> }
> + atl1c_patch_assign(hw);
> +
> hw->intr_mask = IMR_NORMAL_MASK;
> hw->phy_configured = false;
> hw->preamble_len = 7;
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists