lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:	Tue, 01 May 2012 11:42:03 -0500
From:	"Stephen M. Cameron" <scameron@...rdog.cce.hp.com>
To:	james.bottomley@...senpartnership.com
Cc:	linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org,
	stephenmcameron@...il.com, thenzl@...hat.com,
	akpm@...ux-foundation.org, mikem@...rdog.cce.hp.com
Subject: [PATCH 00/17] hpsa: resend updates for April, 2012 

The two big changes here are adding an abort handler, and using multiple
reply queues for command completions.  Updated the patch set since last
time to address comments:

	* Use pci_set_master(h->pdev) to enable bus mastering instead of 
	  doing it manually.

	* Retry driver initiated commands on SAM_STAT_TASK_SET_FULL
	  as well as SAM_STAT_BUSY and retry more than just 3 times,
	  backing off the retry rate.

	* Dropped the changes that used the new IS_ENABLED macro.

Matt Bondurant (1):
      hpsa: retry driver initiated commands on busy status

Matt Gates (2):
      hpsa: use multiple reply queues
      hpsa: refine interrupt handler locking for greater concurrency

Mike Miller (1):
      hpsa: add new RAID level "1(ADM)"

Stephen M. Cameron (13):
      hpsa: call pci_disable_device on driver unload
      hpsa: do not skip disabled devices
      hpsa: enable bus master bit after pci_enable_device
      hpsa: suppress excessively chatty error messages
      hpsa: do not read from controller unnecessarily in completion code
      hpsa: do not give up retry of driver cmds after only 3 retries
      hpsa: remove unused parameter from finish_cmd
      hpsa: add abort error handler function
      hpsa: do aborts two ways
      hpsa: factor out tail calls to next_command() in process_(non)indexed_cmd()
      hpsa: factor out hpsa_free_irqs_and_disable_msix
      hpsa: removed unused member maxQsinceinit
      hpsa: dial down lockup detection during firmware flash


 drivers/block/cciss.c   |    2 
 drivers/scsi/hpsa.c     |  682 ++++++++++++++++++++++++++++++++++++++---------
 drivers/scsi/hpsa.h     |   85 ++++--
 drivers/scsi/hpsa_cmd.h |   37 ++-
 4 files changed, 642 insertions(+), 164 deletions(-)

-- 
-- steve

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ