| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 02 May 2012 21:47:27 +0900
From: Magnus Damm <magnus.damm@...il.com>
To: linux-serial@...r.kernel.org
Cc: arnd@...db.de, swarren@...dotorg.org, lethal@...ux-sh.org,
gregkh@...uxfoundation.org, linux-sh@...r.kernel.org,
linux-kernel@...r.kernel.org, rjw@...k.pl,
paul.gortmaker@...driver.com, horms@...ge.net.au, olof@...om.net,
Magnus Damm <magnus.damm@...il.com>, dan.j.williams@...el.com,
alan@...ux.intel.com
Subject: [PATCH 05/06] serial8250: Introduce serial8250_register_8250_port()
From: Magnus Damm <damm@...nsource.se>
Introduce yet another 8250 registration function.
This time it is serial8250_register_8250_port() and it
allows us to register 8250 hardware instances using struct
uart_8250_port. The new function makes it possible to
register 8250 hardware that makes use of 8250 specific
callbacks such as ->dl_read() and ->dl_write().
Signed-off-by: Magnus Damm <damm@...nsource.se>
---
drivers/tty/serial/8250/8250.c | 89 ++++++++++++++++++++++++++--------------
include/linux/serial_8250.h | 1
--- 0005/drivers/tty/serial/8250/8250.c
+++ work/drivers/tty/serial/8250/8250.c 2012-05-02 20:51:44.000000000 +0900
@@ -3111,7 +3111,7 @@ static struct uart_8250_port *serial8250
}
/**
- * serial8250_register_port - register a serial port
+ * serial8250_register_8250_port - register a serial port
* @port: serial port template
*
* Configure the serial port specified by the request. If the
@@ -3123,52 +3123,56 @@ static struct uart_8250_port *serial8250
*
* On success the port is ready to use and the line number is returned.
*/
-int serial8250_register_port(struct uart_port *port)
+int serial8250_register_8250_port(struct uart_8250_port *up)
{
struct uart_8250_port *uart;
int ret = -ENOSPC;
- if (port->uartclk == 0)
+ if (up->port.uartclk == 0)
return -EINVAL;
mutex_lock(&serial_mutex);
- uart = serial8250_find_match_or_unused(port);
+ uart = serial8250_find_match_or_unused(&up->port);
if (uart) {
uart_remove_one_port(&serial8250_reg, &uart->port);
- uart->port.iobase = port->iobase;
- uart->port.membase = port->membase;
- uart->port.irq = port->irq;
- uart->port.irqflags = port->irqflags;
- uart->port.uartclk = port->uartclk;
- uart->port.fifosize = port->fifosize;
- uart->port.regshift = port->regshift;
- uart->port.iotype = port->iotype;
- uart->port.flags = port->flags | UPF_BOOT_AUTOCONF;
- uart->port.mapbase = port->mapbase;
- uart->port.private_data = port->private_data;
- if (port->dev)
- uart->port.dev = port->dev;
+ uart->port.iobase = up->port.iobase;
+ uart->port.membase = up->port.membase;
+ uart->port.irq = up->port.irq;
+ uart->port.irqflags = up->port.irqflags;
+ uart->port.uartclk = up->port.uartclk;
+ uart->port.fifosize = up->port.fifosize;
+ uart->port.regshift = up->port.regshift;
+ uart->port.iotype = up->port.iotype;
+ uart->port.flags = up->port.flags | UPF_BOOT_AUTOCONF;
+ uart->port.mapbase = up->port.mapbase;
+ uart->port.private_data = up->port.private_data;
+ if (up->port.dev)
+ uart->port.dev = up->port.dev;
- if (port->flags & UPF_FIXED_TYPE)
- serial8250_init_fixed_type_port(uart, port->type);
+ if (up->port.flags & UPF_FIXED_TYPE)
+ serial8250_init_fixed_type_port(uart, up->port.type);
set_io_from_upio(&uart->port);
/* Possibly override default I/O functions. */
- if (port->serial_in)
- uart->port.serial_in = port->serial_in;
- if (port->serial_out)
- uart->port.serial_out = port->serial_out;
- if (port->handle_irq)
- uart->port.handle_irq = port->handle_irq;
+ if (up->port.serial_in)
+ uart->port.serial_in = up->port.serial_in;
+ if (up->port.serial_out)
+ uart->port.serial_out = up->port.serial_out;
+ if (up->port.handle_irq)
+ uart->port.handle_irq = up->port.handle_irq;
/* Possibly override set_termios call */
- if (port->set_termios)
- uart->port.set_termios = port->set_termios;
- if (port->pm)
- uart->port.pm = port->pm;
- if (port->handle_break)
- uart->port.handle_break = port->handle_break;
+ if (up->port.set_termios)
+ uart->port.set_termios = up->port.set_termios;
+ if (up->port.pm)
+ uart->port.pm = up->port.pm;
+ if (up->port.handle_break)
+ uart->port.handle_break = up->port.handle_break;
+ if (up->dl_read)
+ uart->dl_read = up->dl_read;
+ if (up->dl_write)
+ uart->dl_write = up->dl_write;
if (serial8250_isa_config != NULL)
serial8250_isa_config(0, &uart->port,
@@ -3182,6 +3186,29 @@ int serial8250_register_port(struct uart
return ret;
}
+EXPORT_SYMBOL(serial8250_register_8250_port);
+
+/**
+ * serial8250_register_port - register a serial port
+ * @port: serial port template
+ *
+ * Configure the serial port specified by the request. If the
+ * port exists and is in use, it is hung up and unregistered
+ * first.
+ *
+ * The port is then probed and if necessary the IRQ is autodetected
+ * If this fails an error is returned.
+ *
+ * On success the port is ready to use and the line number is returned.
+ */
+int serial8250_register_port(struct uart_port *port)
+{
+ struct uart_8250_port up;
+
+ memset(&up, 0, sizeof(up));
+ memcpy(&up.port, port, sizeof(*port));
+ return serial8250_register_8250_port(&up);
+}
EXPORT_SYMBOL(serial8250_register_port);
/**
--- 0001/include/linux/serial_8250.h
+++ work/include/linux/serial_8250.h 2012-05-02 20:47:21.000000000 +0900
@@ -69,6 +69,7 @@ enum {
struct uart_port;
struct uart_8250_port;
+int serial8250_register_8250_port(struct uart_8250_port *);
int serial8250_register_port(struct uart_port *);
void serial8250_unregister_port(int line);
void serial8250_suspend_port(int line);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists