| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 3 May 2012 08:35:47 -0700 From: Greg KH <gregkh@...uxfoundation.org> To: Francois Rigaut <frigaut@...il.com> Cc: Nico Schottelius <nico-linux-20120419@...ottelius.org>, LKML <linux-kernel@...r.kernel.org> Subject: Re: Linux Support for Thunderbolt using Apple Monitor On Thu, May 03, 2012 at 09:45:00PM +1000, Francois Rigaut wrote: > After Greg pointed to the PCIE, I realized that modules related to PCIE > hotpluging were not loaded in my config. I then did a whole bunch of test > modprobing a couple of modules: pciehp (with and without pciehp_force and/or > pciehp_poll_mode) and acpiphp (not together obviously). No change:connecting > the thunderbolt does not lead to any kernel activity. No message whatsoever in > /var/log/everything.log. > Checked /sys/bus/pci/slots, nothing appeared. No change in lspci. Added a "echo > 1 > /sys/bus/pci/rescan" for good measure to no avail. Does anything show up in there at all? How about if you load the acpiphp module instead? Some BIOSes use that instead of pciehp. You need one of those drivers in order for this to work properly. Also, speaking of BIOS, make sure you have the latest updates, there were a lot of initial problems with Thunderbolt hotplug issues that were fixed in newer BIOS versions, so that will be required to be updated. thanks, greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists