| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 07 May 2012 09:47:59 -0500
From: Larry Finger <Larry.Finger@...inger.net>
To: "Justin P. Mattock" <justinmattock@...il.com>
CC: florian.c.schilhabel@...glemail.com, gregkh@...uxfoundation.org,
linux-kernel@...r.kernel.org, evel@...verdev.osuosl.org
Subject: Re: [PATCH NEXT]"staging" "rtl8712" Fix typos.
On 05/07/2012 09:38 AM, Justin P. Mattock wrote:
> From: "Justin P. Mattock"<justinmattock@...il.com>
>
> Signed-off-by: Justin P. Mattock<justinmattock@...il.com>
>
> ---
>
ACKed-by: Larry Finger <Larry.Finger@...inger.net>
Larry
> The below patch fixes some typos while going through rtl8712.
>
> drivers/staging/rtl8712/drv_types.h | 2 +-
> drivers/staging/rtl8712/ieee80211.h | 2 +-
> drivers/staging/rtl8712/if_ether.h | 2 +-
> drivers/staging/rtl8712/os_intfs.c | 4 ++--
> drivers/staging/rtl8712/rtl8712_cmd.c | 6 +++---
> drivers/staging/rtl8712/rtl8712_cmd.h | 2 +-
> drivers/staging/rtl8712/rtl8712_efuse.c | 2 +-
> drivers/staging/rtl8712/rtl8712_gp_bitdef.h | 2 +-
> drivers/staging/rtl8712/rtl8712_hal.h | 4 ++--
> drivers/staging/rtl8712/rtl8712_led.c | 6 +++---
> drivers/staging/rtl8712/rtl8712_recv.c | 4 ++--
> drivers/staging/rtl8712/rtl871x_cmd.h | 2 +-
> drivers/staging/rtl8712/rtl871x_ioctl_linux.c | 14 +++++++-------
> drivers/staging/rtl8712/rtl871x_ioctl_set.c | 2 +-
> drivers/staging/rtl8712/rtl871x_mlme.c | 8 ++++----
> drivers/staging/rtl8712/rtl871x_mlme.h | 6 +++---
> drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h | 4 ++--
> drivers/staging/rtl8712/rtl871x_xmit.c | 2 +-
> drivers/staging/rtl8712/rtl871x_xmit.h | 2 +-
> drivers/staging/rtl8712/usb_halinit.c | 4 ++--
> drivers/staging/rtl8712/usb_intf.c | 2 +-
> 21 files changed, 41 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/staging/rtl8712/drv_types.h b/drivers/staging/rtl8712/drv_types.h
> index e83665d..62b5566 100644
> --- a/drivers/staging/rtl8712/drv_types.h
> +++ b/drivers/staging/rtl8712/drv_types.h
> @@ -146,7 +146,7 @@ struct dvobj_priv {
> /**
> * struct _adapter - the main adapter structure for this device.
> *
> - * bup: True indicates that the interface is Up.
> + * bup: True indicates that the interface is up.
> */
> struct _adapter {
> struct dvobj_priv dvobjpriv;
> diff --git a/drivers/staging/rtl8712/ieee80211.h b/drivers/staging/rtl8712/ieee80211.h
> index 3c0092b..21515c3 100644
> --- a/drivers/staging/rtl8712/ieee80211.h
> +++ b/drivers/staging/rtl8712/ieee80211.h
> @@ -705,7 +705,7 @@ enum ieee80211_state {
> IEEE80211_ASSOCIATING_RETRY,
> /* the association procedure is sending AUTH request*/
> IEEE80211_ASSOCIATING_AUTHENTICATING,
> - /* the association procedure has successfully authentcated
> + /* the association procedure has successfully authenticated
> * and is sending association request
> */
> IEEE80211_ASSOCIATING_AUTHENTICATED,
> diff --git a/drivers/staging/rtl8712/if_ether.h b/drivers/staging/rtl8712/if_ether.h
> index 2bbe527..9916b6a 100644
> --- a/drivers/staging/rtl8712/if_ether.h
> +++ b/drivers/staging/rtl8712/if_ether.h
> @@ -25,7 +25,7 @@
> ******************************************************************************/
> /*
> * INET An implementation of the TCP/IP protocol suite for the LINUX
> - * operating system. INET is implemented using the BSD Socket
> + * operating system. INET is implemented using the BSD Socket
> * interface as the means of communication with the user level.
> *
> * Global definitions for the Ethernet IEEE 802.3 interface.
> diff --git a/drivers/staging/rtl8712/os_intfs.c b/drivers/staging/rtl8712/os_intfs.c
> index 7bbd53a..448f00d 100644
> --- a/drivers/staging/rtl8712/os_intfs.c
> +++ b/drivers/staging/rtl8712/os_intfs.c
> @@ -52,7 +52,7 @@ static int lbkmode = RTL8712_AIR_TRX;
> static int hci = RTL8712_USB;
> static int ampdu_enable = 1;/*for enable tx_ampdu*/
>
> -/* The video_mode variable is for vedio mode.*/
> +/* The video_mode variable is for video mode.*/
> /* It may be specify when inserting module with video_mode=1 parameter.*/
> static int video_mode = 1; /* enable video mode*/
>
> @@ -248,7 +248,7 @@ static u32 start_drv_threads(struct _adapter *padapter)
>
> void r8712_stop_drv_threads(struct _adapter *padapter)
> {
> - /*Below is to termindate r8712_cmd_thread& event_thread...*/
> + /*Below is to terminate r8712_cmd_thread& event_thread...*/
> up(&padapter->cmdpriv.cmd_queue_sema);
> if (padapter->cmdThread)
> _down_sema(&padapter->cmdpriv.terminate_cmdthread_sema);
> diff --git a/drivers/staging/rtl8712/rtl8712_cmd.c b/drivers/staging/rtl8712/rtl8712_cmd.c
> index 9f6ebc4..6c4a94c 100644
> --- a/drivers/staging/rtl8712/rtl8712_cmd.c
> +++ b/drivers/staging/rtl8712/rtl8712_cmd.c
> @@ -69,7 +69,7 @@ static void check_hw_pbc(struct _adapter *padapter)
> * After trigger PBC, the variable will be set to false */
> DBG_8712("CheckPbcGPIO - PBC is pressed !!!!\n");
> /* 0 is the default value and it means the application monitors
> - * the HW PBC doesn't privde its pid to driver. */
> + * the HW PBC doesn't provide its pid to driver. */
> if (padapter->pid == 0)
> return;
> kill_pid(find_vpid(padapter->pid), SIGUSR1, 1);
> @@ -382,7 +382,7 @@ _next:
> *pcmdbuf = cpu_to_le32((cmdsz& 0x0000ffff) |
> (pcmd->cmdcode<< 16) |
> (pcmdpriv->cmd_seq<< 24));
> - pcmdbuf += 2 ; /* 8 bytes aligment */
> + pcmdbuf += 2 ; /* 8 bytes alignment */
> memcpy((u8 *)pcmdbuf, pcmd->parmbuf, pcmd->cmdsz);
> while (check_cmd_fifo(padapter, wr_sz) == _FAIL) {
> if ((padapter->bDriverStopped == true) ||
> @@ -471,7 +471,7 @@ void r8712_event_handle(struct _adapter *padapter, uint *peventbuf)
> pevt_priv->event_seq++; /* update evt_seq */
> if (pevt_priv->event_seq> 127)
> pevt_priv->event_seq = 0;
> - peventbuf = peventbuf + 2; /* move to event content, 8 bytes aligment */
> + peventbuf = peventbuf + 2; /* move to event content, 8 bytes alignment */
> if (peventbuf) {
> event_callback = wlanevents[evt_code].event_callback;
> if (event_callback)
> diff --git a/drivers/staging/rtl8712/rtl8712_cmd.h b/drivers/staging/rtl8712/rtl8712_cmd.h
> index 766a646..039ab3e 100644
> --- a/drivers/staging/rtl8712/rtl8712_cmd.h
> +++ b/drivers/staging/rtl8712/rtl8712_cmd.h
> @@ -121,7 +121,7 @@ enum rtl8712_h2c_cmd {
> GEN_CMD_CODE(_GetCurDataRate) ,
>
> GEN_CMD_CODE(_GetTxRetrycnt), /* to record times that Tx retry to
> - * transmmit packet after association
> + * transmit packet after association
> */
> GEN_CMD_CODE(_GetRxRetrycnt), /* to record total number of the
> * received frame with ReTry bit set in
> diff --git a/drivers/staging/rtl8712/rtl8712_efuse.c b/drivers/staging/rtl8712/rtl8712_efuse.c
> index b08e9a2..377fca9 100644
> --- a/drivers/staging/rtl8712/rtl8712_efuse.c
> +++ b/drivers/staging/rtl8712/rtl8712_efuse.c
> @@ -417,7 +417,7 @@ u8 r8712_efuse_pg_packet_write(struct _adapter *padapter, const u8 offset,
> } else { /* write header fail */
> bResult = false;
> if (0xFF == efuse_data)
> - return bResult; /* not thing damaged. */
> + return bResult; /* nothing damaged. */
> /* call rescue procedure */
> if (fix_header(padapter, efuse_data, efuse_addr) ==
> false)
> diff --git a/drivers/staging/rtl8712/rtl8712_gp_bitdef.h b/drivers/staging/rtl8712/rtl8712_gp_bitdef.h
> index 884a821..138ea45 100644
> --- a/drivers/staging/rtl8712/rtl8712_gp_bitdef.h
> +++ b/drivers/staging/rtl8712/rtl8712_gp_bitdef.h
> @@ -70,7 +70,7 @@
> #define GPIOSEL_BT 2 /* BT_coex*/
> #define GPIOSEL_WLANDBG 3 /* WLANDBG*/
> #define GPIOSEL_GPIO_MASK (~(BIT(0)|BIT(1)))
> -/* HW Readio OFF switch (GPIO BIT) */
> +/* HW Radio OFF switch (GPIO BIT) */
> #define HAL_8192S_HW_GPIO_OFF_BIT BIT(3)
> #define HAL_8192S_HW_GPIO_OFF_MASK 0xF7
> #define HAL_8192S_HW_GPIO_WPS_BIT BIT(4)
> diff --git a/drivers/staging/rtl8712/rtl8712_hal.h b/drivers/staging/rtl8712/rtl8712_hal.h
> index d19865a..4c51fa3 100644
> --- a/drivers/staging/rtl8712/rtl8712_hal.h
> +++ b/drivers/staging/rtl8712/rtl8712_hal.h
> @@ -83,7 +83,7 @@ struct fw_priv { /*8-bytes alignment required*/
> unsigned char rfintfs; /* 0:SWSI, 1:HWSI, 2:HWPI*/
> unsigned char def_nettype;
> unsigned char turboMode;
> - unsigned char lowPowerMode;/* 0: noral mode, 1: low power mode*/
> + unsigned char lowPowerMode;/* 0: normal mode, 1: low power mode*/
> /*--- long word 2 ----*/
> unsigned char lbk_mode; /*0x00: normal, 0x03: MACLBK, 0x01: PHYLBK*/
> unsigned char mp_mode; /* 1: for MP use, 0: for normal driver */
> @@ -123,7 +123,7 @@ struct fw_priv { /*8-bytes alignment required*/
> unsigned char rsvd053;
> };
>
> -struct fw_hdr {/*8-byte alinment required*/
> +struct fw_hdr {/*8-byte alignment required*/
> unsigned short signature;
> unsigned short version; /*0x8000 ~ 0x8FFF for FPGA version,
> *0x0000 ~ 0x7FFF for ASIC version,*/
> diff --git a/drivers/staging/rtl8712/rtl8712_led.c b/drivers/staging/rtl8712/rtl8712_led.c
> index bac56e5..c9eb4b7 100644
> --- a/drivers/staging/rtl8712/rtl8712_led.c
> +++ b/drivers/staging/rtl8712/rtl8712_led.c
> @@ -60,7 +60,7 @@ enum _LED_STATE_871x {
> * the # of times to blink is depend on time
> * for scanning. */
> LED_NO_LINK_BLINK = 7, /* LED is blinking during no link state. */
> - LED_BLINK_StartToBlink = 8,/* Customzied for Sercomm Printer
> + LED_BLINK_StartToBlink = 8,/* Customized for Sercomm Printer
> * Server case */
> LED_BLINK_WPS = 9, /* LED is blinkg during WPS communication */
> LED_TXRX_BLINK = 10,
> @@ -826,7 +826,7 @@ static void BlinkTimerCallback(unsigned long data)
> {
> struct LED_871x *pLed = (struct LED_871x *)data;
>
> - /* This fixed the crash problem on Fedora 12 when trying to do thei
> + /* This fixed the crash problem on Fedora 12 when trying to do the
> * insmod;ifconfig up;rmmod commands. */
> if ((pLed->padapter->bSurpriseRemoved == true) ||
> (pLed->padapter->bDriverStopped == true))
> @@ -836,7 +836,7 @@ static void BlinkTimerCallback(unsigned long data)
>
> /* Description:
> * Callback function of LED BlinkWorkItem.
> - * We dispatch acture LED blink action according to LedStrategy.
> + * We dispatch actual LED blink action according to LedStrategy.
> */
> static void BlinkWorkItemCallback(struct work_struct *work)
> {
> diff --git a/drivers/staging/rtl8712/rtl8712_recv.c b/drivers/staging/rtl8712/rtl8712_recv.c
> index fa6dc9c..5d7217f 100644
> --- a/drivers/staging/rtl8712/rtl8712_recv.c
> +++ b/drivers/staging/rtl8712/rtl8712_recv.c
> @@ -459,7 +459,7 @@ void r8712_rxcmd_event_hdl(struct _adapter *padapter, void *prxcmdbuf)
> cmd_seq = (u8)((le32_to_cpu(voffset)>> 24)& 0x7f);
> eid = (u8)((le32_to_cpu(voffset)>> 16)& 0xff);
> r8712_event_handle(padapter, (uint *)poffset);
> - poffset += (cmd_len + 8);/*8 bytes aligment*/
> + poffset += (cmd_len + 8);/*8 bytes alignment*/
> } while (le32_to_cpu(voffset)& BIT(31));
>
> }
> @@ -603,7 +603,7 @@ static int recv_indicatepkt_reorder(struct _adapter *padapter,
> }
> }
> spin_lock_irqsave(&ppending_recvframe_queue->lock, irql);
> - /*s2. check if winstart_b(indicate_seq) needs to been updated*/
> + /*s2. check if winstart_b(indicate_seq) needs to be updated*/
> if (!check_indicate_seq(preorder_ctrl, pattrib->seq_num))
> goto _err_exit;
> /*s3. Insert all packet into Reorder Queue to maintain its ordering.*/
> diff --git a/drivers/staging/rtl8712/rtl871x_cmd.h b/drivers/staging/rtl8712/rtl871x_cmd.h
> index 757ebf7..9d93189 100644
> --- a/drivers/staging/rtl8712/rtl871x_cmd.h
> +++ b/drivers/staging/rtl8712/rtl871x_cmd.h
> @@ -720,7 +720,7 @@ struct DisconnectCtrlEx_param {
> * Result:
> * 0x00: success
> * 0x01: success, and check Response.
> - * 0x02: cmd ignored due to duplicated sequcne number
> + * 0x02: cmd ignored due to duplicated sequence number
> * 0x03: cmd dropped due to invalid cmd code
> * 0x04: reserved.
> */
> diff --git a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
> index 3b23bef..35e781f 100644
> --- a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
> +++ b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
> @@ -241,7 +241,7 @@ static inline char *translate_scan(struct _adapter *padapter,
> /* Add frequency/channel */
> iwe.cmd = SIOCGIWFREQ;
> {
> - /* check legel index */
> + /* check legal index */
> u8 dsconfig = pnetwork->network.Configuration.DSConfig;
> if (dsconfig>= 1&& dsconfig<= sizeof(
> ieee80211_wlan_frequencies) / sizeof(long))
> @@ -809,11 +809,11 @@ static int r871x_wx_set_pmkid(struct net_device *dev,
>
> /*
> There are the BSSID information in the bssid.sa_data array.
> - If cmd is IW_PMKSA_FLUSH, it means the wpa_suppplicant wants to clear
> - all the PMKID information. If cmd is IW_PMKSA_ADD, it means the
> - wpa_supplicant wants to add a PMKID/BSSID to driver.
> + If cmd is IW_PMKSA_FLUSH, it means the wpa_supplicant wants to clear
> + all the PMKID information. If cmd is IW_PMKSA_ADD, it means the
> + wpa_supplicant wants to add a PMKID/BSSID to driver.
> If cmd is IW_PMKSA_REMOVE, it means the wpa_supplicant wants to
> - remove a PMKID/BSSID from driver.
> + remove a PMKID/BSSID from driver.
> */
> if (pPMK == NULL)
> return -EINVAL;
> @@ -923,7 +923,7 @@ static int r8711_wx_get_range(struct net_device *dev,
> range->max_qual.noise = 100;
> range->max_qual.updated = 7; /* Updated all three */
> range->avg_qual.qual = 92; /*> 8% missed beacons is 'bad' */
> - /* TODO: Find real 'good' to 'bad' threshol value for RSSI */
> + /* TODO: Find real 'good' to 'bad' threshold value for RSSI */
> range->avg_qual.level = 20 + -98;
> range->avg_qual.noise = 0;
> range->avg_qual.updated = 7; /* Updated all three */
> @@ -1070,7 +1070,7 @@ FREE_EXT:
> * MAC# of a preferred Access Point.
> * Currently, the request comes via Wireless Extensions' SIOCSIWAP ioctl.
> *
> - * For this operation to succeed, there is no need for the interface to be Up.
> + * For this operation to succeed, there is no need for the interface to be up.
> *
> */
> static int r8711_wx_set_wap(struct net_device *dev,
> diff --git a/drivers/staging/rtl8712/rtl871x_ioctl_set.c b/drivers/staging/rtl8712/rtl871x_ioctl_set.c
> index fb29b42..f352b32 100644
> --- a/drivers/staging/rtl8712/rtl871x_ioctl_set.c
> +++ b/drivers/staging/rtl8712/rtl871x_ioctl_set.c
> @@ -264,7 +264,7 @@ void r8712_set_802_11_infrastructure_mode(struct _adapter *padapter,
> (*pold_state == Ndis802_11Infrastructure) ||
> (*pold_state == Ndis802_11IBSS)) {
> /* will clr Linked_state before this function,
> - * we must have chked whether issue dis-assoc_cmd or
> + * we must have checked whether issue dis-assoc_cmd or
> * not */
> r8712_ind_disconnect(padapter);
> }
> diff --git a/drivers/staging/rtl8712/rtl871x_mlme.c b/drivers/staging/rtl8712/rtl871x_mlme.c
> index 4277d03..dc7adc1 100644
> --- a/drivers/staging/rtl8712/rtl871x_mlme.c
> +++ b/drivers/staging/rtl8712/rtl871x_mlme.c
> @@ -137,7 +137,7 @@ static void _free_network_nolock(struct mlme_priv *pmlmepriv,
>
> /*
> return the wlan_network with the matching addr
> - Shall be calle under atomic context...
> + Shall be called under atomic context...
> to avoid possible racing condition...
> */
> static struct wlan_network *_r8712_find_network(struct __queue *scanned_queue,
> @@ -255,7 +255,7 @@ void r8712_free_network_queue(struct _adapter *dev)
> /*
> return the wlan_network with the matching addr
>
> - Shall be calle under atomic context...
> + Shall be called under atomic context...
> to avoid possible racing condition...
> */
> static struct wlan_network *r8712_find_network(struct __queue *scanned_queue,
> @@ -1037,7 +1037,7 @@ void r8712_cpwm_event_callback(struct _adapter *adapter, u8 *pbuf)
> * and the WiFi client will drop the data with seq number 0.
> * So, the 8712 firmware has to inform driver with receiving the
> * ADDBA-Req frame so that the driver can reset the
> - * sequence value of Rx reorder contorl.
> + * sequence value of Rx reorder control.
> */
> void r8712_got_addbareq_event_callback(struct _adapter *adapter, u8 *pbuf)
> {
> @@ -1775,7 +1775,7 @@ static void update_ht_cap(struct _adapter *padapter, u8 *pie, uint ie_len)
> phtpriv->rx_ampdu_maxlen = max_ampdu_sz;
> }
> /* for A-MPDU Rx reordering buffer control for bmc_sta& sta_info
> - * if A-MPDU Rx is enabled, reseting rx_ordering_ctrl
> + * if A-MPDU Rx is enabled, resetting rx_ordering_ctrl
> * wstart_b(indicate_seq) to default value=0xffff
> * todo: check if AP can send A-MPDU packets
> */
> diff --git a/drivers/staging/rtl8712/rtl871x_mlme.h b/drivers/staging/rtl8712/rtl871x_mlme.h
> index 71ca013..42bd0bf 100644
> --- a/drivers/staging/rtl8712/rtl871x_mlme.h
> +++ b/drivers/staging/rtl8712/rtl871x_mlme.h
> @@ -69,8 +69,8 @@ since mlme_priv is a shared resource between many threads,
> like ISR/Call-Back functions, the OID handlers, and even timer functions.
> Each _queue has its own locks, already.
> Other items are protected by mlme_priv.lock.
> -To avoid possible dead lock, any thread trying to modifiying mlme_priv
> -SHALL not lock up more than one locks at a time!
> +To avoid possible dead lock, any thread trying to modify mlme_priv
> +SHALL not lock up more than one lock at a time!
> */
>
> #define traffic_threshold 10
> @@ -132,7 +132,7 @@ static inline sint get_fwstate(struct mlme_priv *pmlmepriv)
> * therefore set it to be the critical section...
> *
> * ### NOTE:#### (!!!!)
> - * TAKE CARE THAT BEFORE CALLING THIS FUNC, LOCK pmlmepriv->lock
> + * TAKE CARE BEFORE CALLING THIS FUNC, LOCK pmlmepriv->lock
> */
> static inline void set_fwstate(struct mlme_priv *pmlmepriv, sint state)
> {
> diff --git a/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h b/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h
> index 23532a7..8e25862 100644
> --- a/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h
> +++ b/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h
> @@ -184,7 +184,7 @@
>
> /*RxIQ DC offset, Rx digital filter, DC notch filter */
> #define rOFDM0_XARxAFE 0xc10
> -#define rOFDM0_XARxIQImbalance 0xc14 /* RxIQ imblance matrix */
> +#define rOFDM0_XARxIQImbalance 0xc14 /* RxIQ imbalance matrix */
> #define rOFDM0_XBRxAFE 0xc18
> #define rOFDM0_XBRxIQImbalance 0xc1c
> #define rOFDM0_XCRxAFE 0xc20
> @@ -603,7 +603,7 @@
> #define bCCKRxIG 0x7f00
> #define bCCKLNAPolarity 0x800000
> #define bCCKRx1stGain 0x7f0000
> -#define bCCKRFExtend 0x20000000 /* CCK Rx Iinital gain polarity */
> +#define bCCKRFExtend 0x20000000 /* CCK Rx inital gain polarity */
> #define bCCKRxAGCSatLevel 0x1f000000
> #define bCCKRxAGCSatCount 0xe0
> #define bCCKRxRFSettle 0x1f /* AGCsamp_dly */
> diff --git a/drivers/staging/rtl8712/rtl871x_xmit.c b/drivers/staging/rtl8712/rtl871x_xmit.c
> index aa57e77..2ddb757 100644
> --- a/drivers/staging/rtl8712/rtl871x_xmit.c
> +++ b/drivers/staging/rtl8712/rtl871x_xmit.c
> @@ -72,7 +72,7 @@ sint _r8712_init_xmit_priv(struct xmit_priv *pxmitpriv,
> memset((unsigned char *)pxmitpriv, 0, sizeof(struct xmit_priv));
> spin_lock_init(&pxmitpriv->lock);
> /*
> - Please insert all the queue initializaiton using _init_queue below
> + Please insert all the queue initialization using _init_queue below
> */
> pxmitpriv->adapter = padapter;
> _init_queue(&pxmitpriv->be_pending);
> diff --git a/drivers/staging/rtl8712/rtl871x_xmit.h b/drivers/staging/rtl8712/rtl871x_xmit.h
> index 638b79b..ee90698 100644
> --- a/drivers/staging/rtl8712/rtl871x_xmit.h
> +++ b/drivers/staging/rtl8712/rtl871x_xmit.h
> @@ -119,7 +119,7 @@ struct pkt_attrib {
>
> u8 priority;
> u8 encrypt; /* when 0 indicate no encrypt. when non-zero,
> - * indicate the encrypt algorith*/
> + * indicate the encrypt algorithm*/
> u8 iv_len;
> u8 icv_len;
> unsigned char iv[8];
> diff --git a/drivers/staging/rtl8712/usb_halinit.c b/drivers/staging/rtl8712/usb_halinit.c
> index 46287c1..b4ae11a 100644
> --- a/drivers/staging/rtl8712/usb_halinit.c
> +++ b/drivers/staging/rtl8712/usb_halinit.c
> @@ -141,7 +141,7 @@ u8 r8712_usb_hal_bus_init(struct _adapter *padapter)
> /* Enable AFE PLL Macro Block */
> val8 = r8712_read8(padapter, AFE_PLL_CTRL);
> r8712_write8(padapter, AFE_PLL_CTRL, (val8 | 0x11));
> - /* Attatch AFE PLL to MACTOP/BB/PCIe Digital */
> + /* Attach AFE PLL to MACTOP/BB/PCIe Digital */
> val8 = r8712_read8(padapter, SYS_ISO_CTRL);
> r8712_write8(padapter, SYS_ISO_CTRL, (val8& 0xEE));
> /* Switch to 40M clock */
> @@ -234,7 +234,7 @@ u8 r8712_usb_hal_bus_init(struct _adapter *padapter)
> udelay(500);
> r8712_write8(padapter, AFE_PLL_CTRL, (val8 | 0x11));
> udelay(500);
> - /* Attatch AFE PLL to MACTOP/BB/PCIe Digital */
> + /* Attach AFE PLL to MACTOP/BB/PCIe Digital */
> val8 = r8712_read8(padapter, SYS_ISO_CTRL);
> r8712_write8(padapter, SYS_ISO_CTRL, (val8& 0xEE));
> /* Switch to 40M clock */
> diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c
> index e419b4f..a0de043 100644
> --- a/drivers/staging/rtl8712/usb_intf.c
> +++ b/drivers/staging/rtl8712/usb_intf.c
> @@ -644,7 +644,7 @@ static void r871xu_dev_remove(struct usb_interface *pusb_intf)
> /* decrease the reference count of the usb device structure
> * when disconnect */
> usb_put_dev(udev);
> - /* If we didn't unplug usb dongle and remove/insert modlue, driver
> + /* If we didn't unplug usb dongle and remove/insert module, driver
> * fails on sitesurvey for the first time when device is up.
> * Reset usb port for sitesurvey fail issue. */
> if (udev->state != USB_STATE_NOTATTACHED)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists