| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 7 May 2012 18:19:41 +0100
From: Mark Brown <broonie@...nsource.wolfsonmicro.com>
To: Liam Girdwood <lrg@...com>
Cc: linux-kernel@...r.kernel.org, patches@...nsource.wolfsonmicro.com,
Mark Brown <broonie@...nsource.wolfsonmicro.com>
Subject: [PATCH 1/2] regulator: wm8994: Convert to gpio_request_one()
Signed-off-by: Mark Brown <broonie@...nsource.wolfsonmicro.com>
---
drivers/regulator/wm8994-regulator.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/drivers/regulator/wm8994-regulator.c b/drivers/regulator/wm8994-regulator.c
index e07972f..739207b 100644
--- a/drivers/regulator/wm8994-regulator.c
+++ b/drivers/regulator/wm8994-regulator.c
@@ -182,19 +182,12 @@ static __devinit int wm8994_ldo_probe(struct platform_device *pdev)
if (pdata->ldo[id].enable && gpio_is_valid(pdata->ldo[id].enable)) {
ldo->enable = pdata->ldo[id].enable;
- ret = gpio_request(ldo->enable, "WM8994 LDO enable");
+ ret = gpio_request_one(ldo->enable, 0, "WM8994 LDO enable");
if (ret < 0) {
dev_err(&pdev->dev, "Failed to get enable GPIO: %d\n",
ret);
goto err;
}
-
- ret = gpio_direction_output(ldo->enable, ldo->is_enabled);
- if (ret < 0) {
- dev_err(&pdev->dev, "Failed to set GPIO up: %d\n",
- ret);
- goto err_gpio;
- }
} else
ldo->is_enabled = true;
--
1.7.10
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists