| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1336375569-21692-2-git-send-email-siglesias@igalia.com>
Date: Mon, 7 May 2012 09:26:08 +0200
From: Samuel Iglesias Gonsalvez <siglesias@...lia.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: Samuel Iglesias Gonsalvez <siglesias@...lia.com>,
devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 2/3] Staging: ipack: added support for the TEWS TPCI-200 carrier board
Driver for the carrier board TEWS TPCI-200, a bridge between PCIe bus and
IndustryPack bus.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@...lia.com>
---
drivers/staging/ipack/Kconfig | 5 +
drivers/staging/ipack/Makefile | 1 +
drivers/staging/ipack/TODO | 11 +-
drivers/staging/ipack/bridges/Kconfig | 7 +
drivers/staging/ipack/bridges/Makefile | 1 +
drivers/staging/ipack/bridges/tpci200.c | 1162 +++++++++++++++++++++++++++++++
drivers/staging/ipack/bridges/tpci200.h | 165 +++++
7 files changed, 1351 insertions(+), 1 deletion(-)
create mode 100644 drivers/staging/ipack/bridges/Kconfig
create mode 100644 drivers/staging/ipack/bridges/Makefile
create mode 100644 drivers/staging/ipack/bridges/tpci200.c
create mode 100644 drivers/staging/ipack/bridges/tpci200.h
diff --git a/drivers/staging/ipack/Kconfig b/drivers/staging/ipack/Kconfig
index c036b79..a3f5925 100644
--- a/drivers/staging/ipack/Kconfig
+++ b/drivers/staging/ipack/Kconfig
@@ -8,3 +8,8 @@ menuconfig IPACK_BUS
---help---
If you say Y here you get support for the IndustryPack Framework.
+if IPACK_BUS
+
+source "drivers/staging/ipack/bridges/Kconfig"
+
+endif # IPACK
diff --git a/drivers/staging/ipack/Makefile b/drivers/staging/ipack/Makefile
index 56e2340..59b8762 100644
--- a/drivers/staging/ipack/Makefile
+++ b/drivers/staging/ipack/Makefile
@@ -2,3 +2,4 @@
# Makefile for the IPACK bridge device drivers.
#
obj-$(CONFIG_IPACK_BUS) += ipack.o
+obj-y += bridges/
diff --git a/drivers/staging/ipack/TODO b/drivers/staging/ipack/TODO
index 1939bf4..30716e8 100644
--- a/drivers/staging/ipack/TODO
+++ b/drivers/staging/ipack/TODO
@@ -12,6 +12,16 @@ operations between the two kind of boards.
TODO
====
+TPCI-200
+--------
+
+* It receives the name of the mezzanine plugged in each slot by SYSFS.
+ No autodetection supported yet, because the mezzanine driver could not be
+ loaded at the time that the tpci200 driver loads.
+
+* It has a linked list with the tpci200 devices it is managing. Get rid of it
+ and use driver_for_each_device() instead.
+
Ipack
-----
@@ -20,4 +30,3 @@ Ipack
remove_device() to notify the carrier driver, or the opposite with the call to
the ipack_driver_ops' remove() function could be improved.
-
diff --git a/drivers/staging/ipack/bridges/Kconfig b/drivers/staging/ipack/bridges/Kconfig
new file mode 100644
index 0000000..554302f
--- /dev/null
+++ b/drivers/staging/ipack/bridges/Kconfig
@@ -0,0 +1,7 @@
+config BOARD_TPCI200
+ bool "TEWS TPCI-200 support for IndustryPack bus"
+ depends on IPACK_BUS
+ help
+ This driver supports the TEWS TPCI200 device for the IndustryPack bus.
+ default n
+
diff --git a/drivers/staging/ipack/bridges/Makefile b/drivers/staging/ipack/bridges/Makefile
new file mode 100644
index 0000000..d8b7645
--- /dev/null
+++ b/drivers/staging/ipack/bridges/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_BOARD_TPCI200) += tpci200.o
diff --git a/drivers/staging/ipack/bridges/tpci200.c b/drivers/staging/ipack/bridges/tpci200.c
new file mode 100644
index 0000000..5658aeb
--- /dev/null
+++ b/drivers/staging/ipack/bridges/tpci200.c
@@ -0,0 +1,1162 @@
+/**
+ * tpci200.c
+ *
+ * driver for the TEWS TPCI-200 device
+ * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
+ * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia@...n.ch>, CERN
+ * Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias@...lia.com>, Igalia
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/module.h>
+#include "tpci200.h"
+
+#define MODULE_NAME "tpci200"
+#define PFX MODULE_NAME ": "
+
+struct ipack_bus_ops tpci200_bus_ops;
+
+/* TPCI200 controls registers */
+static int control_reg[] = {
+ TPCI200_CONTROL_A_REG,
+ TPCI200_CONTROL_B_REG,
+ TPCI200_CONTROL_C_REG,
+ TPCI200_CONTROL_D_REG
+};
+
+/* Linked list to save the registered devices */
+static LIST_HEAD(tpci200_list);
+
+static int tpci200_slot_unregister(struct ipack_device *dev);
+
+static struct tpci200_board *check_slot(struct ipack_device *dev)
+{
+ struct tpci200_board *tpci200 = NULL;
+ struct list_head *element, *next;
+ int found = 0;
+
+ if (dev == NULL) {
+ printk(KERN_INFO PFX "Slot doesn't exist.\n");
+ return NULL;
+ }
+
+ list_for_each_safe(element, next, &tpci200_list) {
+ tpci200 = list_entry(element, struct tpci200_board, list);
+ if (tpci200->number == dev->bus_nr) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (!found) {
+ printk(KERN_ERR PFX "Carrier not found\n");
+ return NULL;
+ }
+
+ if (dev->slot >= TPCI200_NB_SLOT) {
+ printk(KERN_INFO PFX
+ "Slot [%s %d:%d] doesn't exist! Last tpci200 slot is %d.\n",
+ TPCI200_SHORTNAME,
+ dev->bus_nr, dev->slot,
+ TPCI200_NB_SLOT-1);
+ return NULL;
+ }
+
+ BUG_ON(tpci200->slots == NULL);
+ if (tpci200->slots[dev->slot].dev == NULL) {
+ printk(KERN_INFO PFX "Slot [%s %d:%d] is not registered !\n",
+ TPCI200_SHORTNAME,
+ dev->bus_nr, dev->slot);
+ return NULL;
+ }
+
+ return tpci200;
+}
+
+static unsigned char __tpci200_read8(void *address, unsigned long offset)
+{
+ return ioread8(address + (offset^1));
+}
+
+static unsigned short __tpci200_read16(void *address, unsigned long offset)
+{
+ return ioread16(address + offset);
+}
+
+static unsigned int __tpci200_read32(void *address, unsigned long offset)
+{
+
+ return swahw32(ioread32(address + offset));
+}
+
+static void __tpci200_write8(unsigned char value, void *address, unsigned long offset)
+{
+ iowrite8(value, address+(offset^1));
+}
+
+static void __tpci200_write16(unsigned short value, void *address, unsigned long offset)
+{
+ iowrite16(value, address+offset);
+}
+
+static void __tpci200_write32(unsigned int value, void *address, unsigned long offset)
+{
+ iowrite32(swahw32(value), address+offset);
+}
+
+struct ipack_addr_space *get_slot_address_space(struct ipack_device *dev, int space)
+{
+ struct ipack_addr_space *addr;
+
+ switch (space) {
+ case IPACK_IO_SPACE:
+ addr = &dev->io_space;
+ break;
+ case IPACK_ID_SPACE:
+ addr = &dev->id_space;
+ break;
+ case IPACK_MEM_SPACE:
+ addr = &dev->mem_space;
+ break;
+ default:
+ printk(KERN_ERR PFX "Slot [%s %d:%d] space number %d doesn't exist !\n",
+ TPCI200_SHORTNAME,
+ dev->bus_nr, dev->slot, space);
+ return NULL;
+ break;
+ }
+
+ if ((addr->size == 0) || (addr->address == NULL)) {
+ printk(KERN_ERR PFX "Error, slot space not mapped !\n");
+ return NULL;
+ }
+
+ return addr;
+}
+
+/**
+ * tpci200_read8 - Read an unsigned char value on space with offset.
+ *
+ * @value Read value
+ * @dev Slot to read
+ * @space Space of the slot to read
+ * @offset Offset
+ *
+ */
+int tpci200_read8(struct ipack_device *dev, int space, unsigned long offset, unsigned char *value)
+{
+ struct ipack_addr_space *addr = NULL;
+ struct tpci200_board *tpci200 = NULL;
+
+ tpci200 = check_slot(dev);
+ if (tpci200 == NULL)
+ return -EINVAL;
+
+ addr = get_slot_address_space(dev, space);
+ if (addr == NULL)
+ return -EINVAL;
+
+ if (offset >= addr->size) {
+ printk(KERN_ERR PFX "Error, slot space offset error !\n");
+ return -EFAULT;
+ }
+
+ *value = __tpci200_read8(addr->address, offset);
+
+ return 0;
+}
+
+int tpci200_read16(struct ipack_device *dev, int space, unsigned long offset, unsigned short *value)
+{
+ struct ipack_addr_space *addr = NULL;
+ struct tpci200_board *tpci200 = NULL;
+
+ tpci200 = check_slot(dev);
+ if (tpci200 == NULL)
+ return -EINVAL;
+
+ addr = get_slot_address_space(dev, space);
+ if (addr == NULL)
+ return -EINVAL;
+
+ if ((offset+2) >= addr->size) {
+ printk(KERN_ERR PFX "Error, slot space offset error !\n");
+ return -EFAULT;
+ }
+ *value = __tpci200_read16(addr->address, offset);
+
+ return 0;
+}
+
+int tpci200_read32(struct ipack_device *dev, int space, unsigned long offset, unsigned int *value)
+{
+ struct ipack_addr_space *addr = NULL;
+ struct tpci200_board *tpci200 = NULL;
+
+ tpci200 = check_slot(dev);
+ if (tpci200 == NULL)
+ return -EINVAL;
+
+ addr = get_slot_address_space(dev, space);
+ if (addr == NULL)
+ return -EINVAL;
+
+ if ((offset+4) >= addr->size) {
+ printk(KERN_ERR PFX "Error, slot space offset error !\n");
+ return -EFAULT;
+ }
+
+ *value = __tpci200_read32(addr->address, offset);
+
+ return 0;
+}
+
+int tpci200_write8(struct ipack_device *dev, int space, unsigned long offset, unsigned char value)
+{
+ struct ipack_addr_space *addr = NULL;
+ struct tpci200_board *tpci200 = NULL;
+
+ tpci200 = check_slot(dev);
+ if (tpci200 == NULL)
+ return -EINVAL;
+
+ addr = get_slot_address_space(dev, space);
+ if (addr == NULL)
+ return -EINVAL;
+
+ if (offset >= addr->size) {
+ printk(KERN_ERR PFX "Error, slot space offset error !\n");
+ return -EFAULT;
+ }
+
+ __tpci200_write8(value, addr->address, offset);
+
+ return 0;
+}
+
+int tpci200_write16(struct ipack_device *dev, int space, unsigned long offset, unsigned short value)
+{
+ struct ipack_addr_space *addr = NULL;
+ struct tpci200_board *tpci200 = NULL;
+
+ tpci200 = check_slot(dev);
+ if (tpci200 == NULL)
+ return -EINVAL;
+
+ addr = get_slot_address_space(dev, space);
+ if (addr == NULL)
+ return -EINVAL;
+
+ if ((offset+2) >= addr->size) {
+ printk(KERN_ERR PFX "Error, slot space offset error !\n");
+ return -EFAULT;
+ }
+
+ __tpci200_write16(value, addr->address, offset);
+
+ return 0;
+}
+
+int tpci200_write32(struct ipack_device *dev, int space, unsigned long offset, unsigned int value)
+{
+ struct ipack_addr_space *addr = NULL;
+ struct tpci200_board *tpci200 = NULL;
+
+ tpci200 = check_slot(dev);
+ if (tpci200 == NULL)
+ return -EINVAL;
+
+ addr = get_slot_address_space(dev, space);
+ if (addr == NULL)
+ return -EINVAL;
+
+ if ((offset+4) >= addr->size) {
+ printk(KERN_ERR PFX "Error, slot space offset error !\n");
+ return -EFAULT;
+ }
+
+ __tpci200_write32(value, addr->address, offset);
+
+ return 0;
+}
+
+void tpci200_unregister(struct tpci200_board *tpci200)
+{
+ int i;
+
+ free_irq(tpci200->info->pdev->irq, (void *) tpci200);
+
+ pci_iounmap(tpci200->info->pdev, tpci200->info->interface_regs);
+ pci_iounmap(tpci200->info->pdev, tpci200->info->ioidint_space);
+ pci_iounmap(tpci200->info->pdev, tpci200->info->mem8_space);
+
+ pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR);
+ pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR);
+ pci_release_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR);
+
+ pci_disable_device(tpci200->info->pdev);
+ pci_dev_put(tpci200->info->pdev);
+
+ kfree(tpci200->info);
+
+ for (i = 0; i < TPCI200_NB_SLOT; i++) {
+ tpci200->slots[i].io_phys.address = NULL;
+ tpci200->slots[i].io_phys.size = 0;
+ tpci200->slots[i].id_phys.address = NULL;
+ tpci200->slots[i].id_phys.size = 0;
+ tpci200->slots[i].mem_phys.address = NULL;
+ tpci200->slots[i].mem_phys.size = 0;
+ }
+}
+
+static irqreturn_t tpci200_interrupt(int irq, void *dev_id)
+{
+ struct tpci200_board *tpci200 = (struct tpci200_board *) dev_id;
+ int i;
+ unsigned long flags;
+ unsigned short status_reg, reg_value;
+ unsigned short unhandled_ints = 0;
+ irqreturn_t ret = IRQ_NONE;
+
+ spin_lock_irqsave(&tpci200->info->access_lock, flags);
+
+ /* Read status register */
+ status_reg = readw((unsigned short *)
+ (tpci200->info->interface_regs + TPCI200_STATUS_REG));
+
+ if (status_reg & TPCI200_SLOT_INT_MASK) {
+ unhandled_ints = status_reg & TPCI200_SLOT_INT_MASK;
+ /* callback to the IRQ handler for the corresponding slot */
+ for (i = 0; i < TPCI200_NB_SLOT; i++) {
+ if ((tpci200->slots[i].irq != NULL) &&
+ (status_reg & ((TPCI200_A_INT0 | TPCI200_A_INT1) << (2*i)))) {
+
+ ret = tpci200->slots[i].irq->handler(tpci200->slots[i].irq->arg);
+
+ /* Dummy reads */
+ readw((unsigned short *)(tpci200->slots[i].dev->io_space.address + 0xC0));
+ readw((unsigned short *)(tpci200->slots[i].dev->io_space.address + 0xC2));
+
+ unhandled_ints &= ~(((TPCI200_A_INT0 | TPCI200_A_INT1) << (2*i)));
+ }
+ }
+ }
+ /* Interrupt not handled are disabled */
+ if (unhandled_ints) {
+ for (i = 0; i < TPCI200_NB_SLOT; i++) {
+ if (unhandled_ints & ((TPCI200_INT0_EN | TPCI200_INT1_EN) << (2*i))) {
+ printk(KERN_ERR PFX
+ "No registered ISR for slot [%s %d:%d]!. IRQ will be disabled.\n",
+ TPCI200_SHORTNAME,
+ tpci200->number, i);
+ reg_value = readw((unsigned short *)(tpci200->info->interface_regs + control_reg[i]));
+ reg_value &= ~(TPCI200_INT0_EN | TPCI200_INT1_EN);
+ writew(reg_value, (unsigned short *)(tpci200->info->interface_regs + control_reg[i]));
+ }
+ }
+ }
+
+ spin_unlock_irqrestore(&tpci200->info->access_lock, flags);
+ return ret;
+}
+
+#ifdef CONFIG_SYSFS
+
+struct ipack_device *tpci200_slot_register(const char *board_name, int size, unsigned int tpci200_number,
+ unsigned int slot_position)
+{
+ int found = 0;
+ struct ipack_device *dev = NULL;
+ struct tpci200_board *tpci200 = NULL;
+ struct list_head *element, *next;
+
+ list_for_each_safe(element, next, &tpci200_list) {
+ tpci200 = list_entry(element, struct tpci200_board, list);
+ if (tpci200->number == tpci200_number) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (!found) {
+ printk(KERN_ERR PFX "carrier board not found for the device\n");
+ return NULL;
+ }
+
+ if (slot_position >= TPCI200_NB_SLOT) {
+ printk(KERN_ERR PFX
+ "Slot [%s %d:%d] doesn't exist! Last tpci200 slot is %d.\n",
+ TPCI200_SHORTNAME,
+ tpci200_number, slot_position,
+ TPCI200_NB_SLOT-1);
+ goto out;
+ }
+
+ if (mutex_lock_interruptible(&tpci200->mutex))
+ goto out;
+
+ if (tpci200->slots[slot_position].dev != NULL) {
+ printk(KERN_ERR PFX "Slot [%s %d:%d] already installed !\n",
+ TPCI200_SHORTNAME,
+ tpci200_number, slot_position);
+ goto out_unlock;
+ }
+
+ dev = kzalloc(sizeof(struct ipack_device), GFP_KERNEL);
+ if (dev == NULL) {
+ printk(KERN_ERR PFX
+ "Slot [%s %d:%d] Unable to allocate memory for new slot !\n",
+ TPCI200_SHORTNAME,
+ tpci200_number, slot_position);
+ goto out_unlock;
+ }
+
+ if (size > IPACK_BOARD_NAME_SIZE) {
+ printk(KERN_WARNING PFX
+ "Slot [%s %d:%d] name (%s) too long (%d > %d). Will be truncated!\n",
+ TPCI200_SHORTNAME,
+ tpci200_number, slot_position,
+ board_name, (int)strlen(board_name), IPACK_BOARD_NAME_SIZE);
+
+ size = IPACK_BOARD_NAME_SIZE;
+ }
+
+ strncpy(dev->board_name, board_name, size-1);
+ dev->board_name[size-1] = '\0';
+ dev->bus_nr = tpci200->info->drv.bus_nr;
+ dev->slot = slot_position;
+ /*
+ * Give the same IRQ number as the slot number.
+ * The TPCI200 has assigned his own two IRQ by PCI bus driver
+ */
+ dev->irq = slot_position;
+
+ dev->id_space.address = NULL;
+ dev->id_space.size = 0;
+ dev->io_space.address = NULL;
+ dev->io_space.size = 0;
+ dev->mem_space.address = NULL;
+ dev->mem_space.size = 0;
+
+ /* Give the operations structure */
+ dev->ops = &tpci200_bus_ops;
+ tpci200->slots[slot_position].dev = dev;
+
+ if (ipack_device_register(dev) < 0) {
+ tpci200_slot_unregister(dev);
+ kfree(dev);
+ }
+
+out_unlock:
+ mutex_unlock(&tpci200->mutex);
+out:
+ return dev;
+}
+
+static ssize_t tpci200_store_board(struct device *pdev, const char *buf, size_t count, int slot)
+{
+ struct tpci200_board *card = dev_get_drvdata(pdev);
+ struct ipack_device *dev = card->slots[slot].dev;
+
+ if (dev != NULL)
+ return -EBUSY;
+
+ dev = tpci200_slot_register(buf, count, card->number, slot);
+ if (dev == NULL)
+ return -ENODEV;
+
+ return count;
+}
+
+static ssize_t tpci200_show_board(struct device *pdev, char *buf, int slot)
+{
+ struct tpci200_board *card = dev_get_drvdata(pdev);
+ struct ipack_device *dev = card->slots[slot].dev;
+
+ if (dev != NULL)
+ return snprintf(buf, PAGE_SIZE, "%s\n", dev->board_name);
+ else
+ return snprintf(buf, PAGE_SIZE, "none\n");
+}
+
+
+ static ssize_t
+tpci200_show_description(struct device *pdev, struct device_attribute *attr, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "TEWS tpci200 carrier PCI for Industry-pack mezzanines.\n");
+}
+
+ static ssize_t
+tpci200_show_board_slot0(struct device *pdev, struct device_attribute *attr, char *buf)
+{
+ return tpci200_show_board(pdev, buf, 0);
+}
+
+ static ssize_t
+tpci200_store_board_slot0(struct device *pdev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ return tpci200_store_board(pdev, buf, count, 0);
+}
+
+ static ssize_t
+tpci200_show_board_slot1(struct device *pdev, struct device_attribute *attr, char *buf)
+{
+ return tpci200_show_board(pdev, buf, 1);
+}
+
+ static ssize_t
+tpci200_store_board_slot1(struct device *pdev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ return tpci200_store_board(pdev, buf, count, 1);
+}
+
+ static ssize_t
+tpci200_show_board_slot2(struct device *pdev, struct device_attribute *attr, char *buf)
+{
+ return tpci200_show_board(pdev, buf, 2);
+}
+
+ static ssize_t
+tpci200_store_board_slot2(struct device *pdev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ return tpci200_store_board(pdev, buf, count, 2);
+}
+
+
+ static ssize_t
+tpci200_show_board_slot3(struct device *pdev, struct device_attribute *attr, char *buf)
+{
+ return tpci200_show_board(pdev, buf, 3);
+}
+
+ static ssize_t
+tpci200_store_board_slot3(struct device *pdev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ return tpci200_store_board(pdev, buf, count, 3);
+}
+
+/* Declaration of the device attributes for the TPCI200 */
+static DEVICE_ATTR(description, S_IRUGO, tpci200_show_description, NULL);
+static DEVICE_ATTR(board_slot0, S_IRUGO | S_IWUSR, tpci200_show_board_slot0, tpci200_store_board_slot0);
+static DEVICE_ATTR(board_slot1, S_IRUGO | S_IWUSR, tpci200_show_board_slot1, tpci200_store_board_slot1);
+static DEVICE_ATTR(board_slot2, S_IRUGO | S_IWUSR, tpci200_show_board_slot2, tpci200_store_board_slot2);
+static DEVICE_ATTR(board_slot3, S_IRUGO | S_IWUSR, tpci200_show_board_slot3, tpci200_store_board_slot3);
+
+static struct attribute *tpci200_attrs[] = {
+ &dev_attr_description.attr,
+ &dev_attr_board_slot0.attr,
+ &dev_attr_board_slot1.attr,
+ &dev_attr_board_slot2.attr,
+ &dev_attr_board_slot3.attr,
+ NULL,
+};
+
+static struct attribute_group tpci200_attr_group = {
+ .attrs = tpci200_attrs,
+};
+
+int tpci200_create_sysfs_files(struct tpci200_board *card)
+{
+ return sysfs_create_group(&card->info->pdev->dev.kobj, &tpci200_attr_group);
+}
+
+void tpci200_remove_sysfs_files(struct tpci200_board *card)
+{
+ sysfs_remove_group(&card->info->pdev->dev.kobj, &tpci200_attr_group);
+}
+
+#else
+
+int tpci200_create_sysfs_files(struct tpci200_board *card)
+{
+ return 0;
+}
+
+void tpci200_remove_sysfs_files(struct tpci200_board *card)
+{
+}
+
+#endif /* CONFIG_SYSFS */
+
+static int tpci200_register(struct tpci200_board *tpci200)
+{
+ int i;
+ int res = 0;
+ unsigned long ioidint_base = 0;
+ unsigned long mem_base = 0;
+ unsigned short slot_ctrl;
+
+ if (pci_enable_device(tpci200->info->pdev) < 0)
+ return -ENODEV;
+
+ if (tpci200_create_sysfs_files(tpci200) < 0) {
+ printk(KERN_ERR PFX "failed creating sysfs files\n");
+ res = -EFAULT;
+ goto out_disable_pci;
+ }
+
+ /* Request IP interface register (Bar 2) */
+ res = pci_request_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR, "Carrier IP interface registers");
+ if (res) {
+ printk(KERN_ERR PFX
+ "(bn 0x%X, sn 0x%X, vid 0x%X, did 0x%X, svid 0x%X, sdid 0x%X) failed to allocate PCI resource for BAR 2 !",
+ tpci200->info->pdev->bus->number, tpci200->info->pdev->devfn,
+ tpci200->info->pdev->vendor, tpci200->info->pdev->device,
+ tpci200->info->pdev->subsystem_vendor, tpci200->info->pdev->subsystem_device);
+ goto out_remove_sysfs;
+ }
+
+ /* Request IO ID INT space (Bar 3) */
+ res = pci_request_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR, "Carrier IO ID INT space");
+ if (res) {
+ printk(KERN_ERR PFX
+ "(bn 0x%X, sn 0x%X, vid 0x%X, did 0x%X, svid 0x%X, sdid 0x%X) failed to allocate PCI resource for BAR 3 !",
+ tpci200->info->pdev->bus->number, tpci200->info->pdev->devfn,
+ tpci200->info->pdev->vendor, tpci200->info->pdev->device,
+ tpci200->info->pdev->subsystem_vendor, tpci200->info->pdev->subsystem_device);
+ goto out_release_ip_space;
+ }
+
+ /* Request MEM space (Bar 4) */
+ res = pci_request_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR, "Carrier MEM space");
+ if (res) {
+ printk(KERN_ERR PFX
+ "(bn 0x%X, sn 0x%X, vid 0x%X, did 0x%X, svid 0x%X, sdid 0x%X) failed to allocate PCI resource for BAR 4!",
+ tpci200->info->pdev->bus->number, tpci200->info->pdev->devfn,
+ tpci200->info->pdev->vendor, tpci200->info->pdev->device,
+ tpci200->info->pdev->subsystem_vendor, tpci200->info->pdev->subsystem_device);
+ goto out_release_ioid_int_space;
+ }
+
+ /* Map internal tpci200 driver user space */
+ tpci200->info->interface_regs = ioremap(pci_resource_start(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR), TPCI200_IFACE_SIZE);
+ tpci200->info->ioidint_space = ioremap(pci_resource_start(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR), TPCI200_IOIDINT_SIZE);
+ tpci200->info->mem8_space = ioremap(pci_resource_start(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR), TPCI200_MEM8_SIZE);
+
+ spin_lock_init(&tpci200->info->access_lock);
+ ioidint_base = pci_resource_start(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR);
+ mem_base = pci_resource_start(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR);
+
+ /* Set the default parameters of the slot
+ * INT0 disabled, level sensitive
+ * INT1 disabled, level sensitive
+ * error interrupt disabled
+ * timeout interrupt disabled
+ * recover time disabled
+ * clock rate 8 MHz
+ */
+ slot_ctrl = 0;
+
+ /* Set all slot physical address space */
+ for (i = 0; i < TPCI200_NB_SLOT; i++) {
+ tpci200->slots[i].io_phys.address = (void *)ioidint_base + TPCI200_IO_SPACE_OFF + TPCI200_IO_SPACE_GAP*i;
+ tpci200->slots[i].io_phys.size = TPCI200_IO_SPACE_SIZE;
+ tpci200->slots[i].id_phys.address = (void *)ioidint_base + TPCI200_ID_SPACE_OFF + TPCI200_ID_SPACE_GAP*i;
+ tpci200->slots[i].id_phys.size = TPCI200_ID_SPACE_SIZE;
+ tpci200->slots[i].mem_phys.address = (void *)mem_base + TPCI200_MEM8_GAP*i;
+ tpci200->slots[i].mem_phys.size = TPCI200_MEM8_SIZE;
+
+ writew(slot_ctrl, (unsigned short *)(tpci200->info->interface_regs + control_reg[i]));
+ }
+
+ res = request_irq(tpci200->info->pdev->irq, tpci200_interrupt, IRQF_SHARED, TPCI200_SHORTNAME, (void *) tpci200);
+ if (res) {
+ printk(KERN_ERR PFX
+ "(bn 0x%X, sn 0x%X, vid 0x%X, did 0x%X, svid 0x%X, sdid 0x%X) unable to register IRQ !",
+ tpci200->info->pdev->bus->number, tpci200->info->pdev->devfn,
+ TPCI200_VENDOR_ID, TPCI200_DEVICE_ID,
+ TPCI200_SUBVENDOR_ID, TPCI200_SUBDEVICE_ID);
+ tpci200_unregister(tpci200);
+ goto out_err;
+ }
+
+ return 0;
+
+out_release_ioid_int_space:
+ pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR);
+out_release_ip_space:
+ pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR);
+out_remove_sysfs:
+ tpci200_remove_sysfs_files(tpci200);
+out_disable_pci:
+ pci_disable_device(tpci200->info->pdev);
+out_err:
+ return res;
+}
+
+static int __tpci200_request_irq(struct tpci200_board *tpci200, struct ipack_device *dev)
+{
+ unsigned short slot_ctrl;
+
+ /* Set the default parameters of the slot
+ * INT0 enabled, level sensitive
+ * INT1 enabled, level sensitive
+ * error interrupt disabled
+ * timeout interrupt disabled
+ * recover time disabled
+ * clock rate 8 MHz
+ */
+ slot_ctrl = TPCI200_INT0_EN | TPCI200_INT1_EN;
+ writew(slot_ctrl, (unsigned short *)(tpci200->info->interface_regs + control_reg[dev->slot]));
+
+ return 0;
+}
+
+static void __tpci200_free_irq(struct tpci200_board *tpci200, struct ipack_device *dev)
+{
+ unsigned short slot_ctrl;
+
+ /* Set the default parameters of the slot
+ * INT0 disabled, level sensitive
+ * INT1 disabled, level sensitive
+ * error interrupt disabled
+ * timeout interrupt disabled
+ * recover time disabled
+ * clock rate 8 MHz
+ */
+ slot_ctrl = 0;
+ writew(slot_ctrl, (unsigned short *)(tpci200->info->interface_regs + control_reg[dev->slot]));
+}
+
+int tpci200_free_irq(struct ipack_device *dev)
+{
+ int res = 0;
+ struct slot_irq *slot_irq = NULL;
+ struct tpci200_board *tpci200 = NULL;
+
+ tpci200 = check_slot(dev);
+ if (tpci200 == NULL) {
+ res = -EINVAL;
+ goto out;
+ }
+
+ if (mutex_lock_interruptible(&tpci200->mutex)) {
+ res = -ERESTARTSYS;
+ goto out;
+ }
+
+ if (tpci200->slots[dev->slot].irq == NULL) {
+ res = -EINVAL;
+ goto out_unlock;
+ }
+
+ __tpci200_free_irq(tpci200, dev);
+ slot_irq = tpci200->slots[dev->slot].irq;
+ tpci200->slots[dev->slot].irq = NULL;
+ kfree(slot_irq);
+
+out_unlock:
+ mutex_unlock(&tpci200->mutex);
+out:
+ return res;
+}
+
+int tpci200_slot_unmap_space(struct ipack_device *dev, int space)
+{
+ int res = 0;
+ struct ipack_addr_space *virt_addr_space = NULL;
+ struct tpci200_board *tpci200 = NULL;
+
+ tpci200 = check_slot(dev);
+ if (tpci200 == NULL) {
+ res = -EINVAL;
+ goto out;
+ }
+
+ if (mutex_lock_interruptible(&tpci200->mutex)) {
+ res = -ERESTARTSYS;
+ goto out;
+ }
+
+ switch (space) {
+ case IPACK_IO_SPACE:
+ if (dev->io_space.address == NULL) {
+ printk(KERN_INFO PFX "Slot [%s %d:%d] IO space not mapped !\n",
+ TPCI200_SHORTNAME,
+ dev->bus_nr, dev->slot);
+ goto out_unlock;
+ }
+ virt_addr_space = &dev->io_space;
+ break;
+ case IPACK_ID_SPACE:
+ if (dev->id_space.address == NULL) {
+ printk(KERN_INFO PFX "Slot [%s %d:%d] ID space not mapped !\n",
+ TPCI200_SHORTNAME,
+ dev->bus_nr, dev->slot);
+ goto out_unlock;
+ }
+ virt_addr_space = &dev->id_space;
+ break;
+ case IPACK_MEM_SPACE:
+ if (dev->mem_space.address == NULL) {
+ printk(KERN_INFO PFX "Slot [%s %d:%d] MEM space not mapped !\n",
+ TPCI200_SHORTNAME,
+ dev->bus_nr, dev->slot);
+ goto out_unlock;
+ }
+ virt_addr_space = &dev->mem_space;
+ break;
+ default:
+ printk(KERN_ERR PFX "Slot [%s %d:%d] space number %d doesn't exist !\n",
+ TPCI200_SHORTNAME,
+ dev->bus_nr, dev->slot, space);
+ res = -EINVAL;
+ goto out_unlock;
+ break;
+ }
+
+ iounmap(virt_addr_space->address);
+
+ virt_addr_space->address = NULL;
+ virt_addr_space->size = 0;
+out_unlock:
+ mutex_unlock(&tpci200->mutex);
+out:
+ return res;
+}
+
+int tpci200_slot_unregister(struct ipack_device *dev)
+{
+ struct tpci200_board *tpci200 = NULL;
+
+ if (dev == NULL)
+ return -ENODEV;
+
+ tpci200 = check_slot(dev);
+ if (tpci200 == NULL)
+ return -EINVAL;
+
+ tpci200_free_irq(dev);
+
+ if (mutex_lock_interruptible(&tpci200->mutex))
+ return -ERESTARTSYS;
+
+ ipack_device_unregister(dev);
+ kfree(dev);
+ tpci200->slots[dev->slot].dev = NULL;
+ mutex_unlock(&tpci200->mutex);
+
+ return 0;
+}
+
+int tpci200_slot_map_space(struct ipack_device *dev, unsigned int memory_size, int space)
+{
+ int res = 0;
+ unsigned int size_to_map = 0;
+ void *phys_address = NULL;
+ struct ipack_addr_space *virt_addr_space = NULL;
+ struct tpci200_board *tpci200 = NULL;
+
+ tpci200 = check_slot(dev);
+ if (tpci200 == NULL) {
+ res = -EINVAL;
+ goto out;
+ }
+
+ if (mutex_lock_interruptible(&tpci200->mutex)) {
+ res = -ERESTARTSYS;
+ goto out;
+ }
+
+ switch (space) {
+ case IPACK_IO_SPACE:
+ if (dev->io_space.address != NULL) {
+ printk(KERN_ERR PFX "Slot [%s %d:%d] IO space already mapped !\n",
+ TPCI200_SHORTNAME,
+ tpci200->number, dev->slot);
+ res = -EINVAL;
+ goto out_unlock;
+ }
+ virt_addr_space = &dev->io_space;
+
+ phys_address = tpci200->slots[dev->slot].io_phys.address;
+ size_to_map = tpci200->slots[dev->slot].io_phys.size;
+ break;
+ case IPACK_ID_SPACE:
+ if (dev->id_space.address != NULL) {
+ printk(KERN_ERR PFX "Slot [%s %d:%d] ID space already mapped !\n",
+ TPCI200_SHORTNAME,
+ tpci200->number, dev->slot);
+ res = -EINVAL;
+ goto out_unlock;
+ }
+ virt_addr_space = &dev->id_space;
+
+ phys_address = tpci200->slots[dev->slot].id_phys.address;
+ size_to_map = tpci200->slots[dev->slot].id_phys.size;
+ break;
+ case IPACK_MEM_SPACE:
+ if (dev->mem_space.address != NULL) {
+ printk(KERN_ERR PFX "Slot [%s %d:%d] MEM space already mapped !\n",
+ TPCI200_SHORTNAME,
+ tpci200->number, dev->slot);
+ res = -EINVAL;
+ goto out_unlock;
+ }
+ virt_addr_space = &dev->mem_space;
+
+ if (memory_size > tpci200->slots[dev->slot].mem_phys.size) {
+ printk(KERN_ERR PFX
+ "Slot [%s %d:%d] request is 0x%X memory, only 0x%X available !\n",
+ TPCI200_SHORTNAME,
+ dev->bus_nr,
+ dev->slot,
+ memory_size,
+ tpci200->slots[dev->slot].mem_phys.size);
+ res = -EINVAL;
+ goto out_unlock;
+ }
+
+ phys_address = tpci200->slots[dev->slot].mem_phys.address;
+ size_to_map = memory_size;
+ break;
+ default:
+ printk(KERN_ERR PFX "Slot [%s %d:%d] space %d doesn't exist !\n",
+ TPCI200_SHORTNAME,
+ tpci200->number, dev->slot, space);
+ res = -EINVAL;
+ goto out_unlock;
+ break;
+ }
+
+ virt_addr_space->size = size_to_map;
+ virt_addr_space->address = ioremap((unsigned long)phys_address, size_to_map);
+
+out_unlock:
+ mutex_unlock(&tpci200->mutex);
+out:
+ return res;
+}
+
+int tpci200_request_irq(struct ipack_device *dev, int vector, int (*handler)(void *), void *arg)
+{
+ int res = 0;
+ struct slot_irq *slot_irq = NULL;
+ struct tpci200_board *tpci200 = NULL;
+
+ tpci200 = check_slot(dev);
+ if (tpci200 == NULL) {
+ res = -EINVAL;
+ goto out;
+ }
+
+ if (mutex_lock_interruptible(&tpci200->mutex)) {
+ res = -ERESTARTSYS;
+ goto out;
+ }
+
+ if (tpci200->slots[dev->slot].irq != NULL) {
+ printk(KERN_ERR PFX "Slot [%s %d:%d] IRQ already registered !\n",
+ TPCI200_SHORTNAME,
+ dev->bus_nr, dev->slot);
+ res = -EINVAL;
+ goto out_unlock;
+ }
+
+ slot_irq = kzalloc(sizeof(struct slot_irq), GFP_KERNEL);
+ if (slot_irq == NULL) {
+ printk(KERN_ERR PFX "Slot [%s %d:%d] unable to allocate memory for IRQ !\n",
+ TPCI200_SHORTNAME,
+ dev->bus_nr, dev->slot);
+ res = -ENOMEM;
+ goto out_unlock;
+ }
+
+ /*
+ * WARNING: Setup Interrupt Vector in the IndustryPack device
+ * before an IRQ request.
+ * Read the User Manual of your IndustryPack device to know
+ * where to write the vector in memory.
+ */
+ slot_irq->vector = vector;
+ slot_irq->handler = handler;
+ slot_irq->arg = arg;
+ if (dev->board_name) {
+ if (strlen(dev->board_name) > IPACK_IRQ_NAME_SIZE) {
+ printk(KERN_WARNING PFX
+ "Slot [%s %d:%d] IRQ name too long (%d char > %d char MAX). Will be truncated!\n",
+ TPCI200_SHORTNAME,
+ dev->bus_nr, dev->slot,
+ (int)strlen(dev->board_name), IPACK_IRQ_NAME_SIZE);
+ }
+ strncpy(slot_irq->name, dev->board_name, IPACK_IRQ_NAME_SIZE-1);
+ } else {
+ strcpy(slot_irq->name, "Unknown");
+ }
+
+ tpci200->slots[dev->slot].irq = slot_irq;
+ res = __tpci200_request_irq(tpci200, dev);
+
+out_unlock:
+ mutex_unlock(&tpci200->mutex);
+out:
+ return res;
+}
+
+static void tpci200_uninstall(struct tpci200_board *tpci200)
+{
+ int i;
+
+ for (i = 0; i < TPCI200_NB_SLOT; i++) {
+ if (tpci200->slots[i].dev == NULL)
+ continue;
+ else
+ tpci200->slots[i].dev->driver->ops->remove(tpci200->slots[i].dev);
+ }
+
+ tpci200_unregister(tpci200);
+
+ if (tpci200->slots != NULL)
+ kfree(tpci200->slots);
+}
+
+struct ipack_bus_ops tpci200_bus_ops = {
+ .map_space = tpci200_slot_map_space,
+ .unmap_space = tpci200_slot_unmap_space,
+ .request_irq = tpci200_request_irq,
+ .free_irq = tpci200_free_irq,
+ .read8 = tpci200_read8,
+ .read16 = tpci200_read16,
+ .read32 = tpci200_read32,
+ .write8 = tpci200_write8,
+ .write16 = tpci200_write16,
+ .write32 = tpci200_write32,
+ .remove_device = tpci200_slot_unregister,
+};
+
+static int tpci200_install(struct tpci200_board *tpci200)
+{
+ int res = 0;
+
+ tpci200->slots = kzalloc(TPCI200_NB_SLOT * sizeof(struct tpci200_slot), GFP_KERNEL);
+ if (tpci200->slots == NULL) {
+ res = -ENOMEM;
+ goto out_err;
+ }
+
+ res = tpci200_register(tpci200);
+ if (res)
+ goto out_free;
+
+ mutex_init(&tpci200->mutex);
+ return 0;
+
+out_free:
+ kfree(tpci200->slots);
+ tpci200->slots = NULL;
+out_err:
+ return res;
+}
+
+static int tpci200_pciprobe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ int ret;
+ struct tpci200_board *tpci200;
+
+ tpci200 = kzalloc(sizeof(struct tpci200_board), GFP_KERNEL);
+ if (!tpci200)
+ return -ENOMEM;
+
+ tpci200->info = kzalloc(sizeof(struct tpci200_infos), GFP_KERNEL);
+ if (!tpci200->info) {
+ kfree(tpci200);
+ return -ENOMEM;
+ }
+
+ /* Save struct pci_dev pointer */
+ tpci200->info->pdev = pdev;
+ tpci200->info->id_table = (struct pci_device_id *)id;
+
+ /* register the device and initialize it */
+ ret = tpci200_install(tpci200);
+ if (ret) {
+ printk(KERN_ERR PFX "Error during tpci200 install !\n");
+ kfree(tpci200->info);
+ kfree(tpci200);
+ return -ENODEV;
+ }
+
+ tpci200->info->drv.dev = &pdev->dev;
+ tpci200->info->drv.slots = TPCI200_NB_SLOT;
+
+ /* Register the bus in the industry pack driver */
+ ret = ipack_bus_register(&tpci200->info->drv);
+ if (ret < 0) {
+ printk(KERN_ERR PFX "error registering the carrier on ipack driver\n");
+ tpci200_uninstall(tpci200);
+ kfree(tpci200->info);
+ kfree(tpci200);
+ return -EFAULT;
+ }
+ /* save the bus number given by ipack to logging purpose */
+ tpci200->number = tpci200->info->drv.bus_nr;
+ dev_set_drvdata(&pdev->dev, tpci200);
+ /* add the registered device in an internal linked list */
+ list_add_tail(&tpci200->list, &tpci200_list);
+ return ret;
+}
+
+static void __tpci200_pci_remove(struct tpci200_board *tpci200)
+{
+ tpci200_uninstall(tpci200);
+ tpci200_remove_sysfs_files(tpci200);
+ list_del(&tpci200->list);
+ ipack_bus_unregister(&tpci200->info->drv);
+ kfree(tpci200);
+}
+
+static void __devexit tpci200_pci_remove(struct pci_dev *dev)
+{
+ struct tpci200_board *tpci200;
+ struct list_head *element, *next;
+
+ /* Search the registered device to uninstalled it */
+ list_for_each_safe(element, next, &tpci200_list) {
+ tpci200 = list_entry(element, struct tpci200_board, list);
+ if (tpci200->info->pdev == dev) {
+ __tpci200_pci_remove(tpci200);
+ break;
+ }
+ }
+}
+
+static struct pci_device_id tpci200_idtable[2]; /* last must be zero */
+
+static struct pci_driver tpci200_pci_drv = {
+ .name = "tpci200",
+ .id_table = tpci200_idtable,
+ .probe = tpci200_pciprobe,
+ .remove = __devexit_p(tpci200_pci_remove),
+};
+
+static int __init tpci200_drvr_init_module(void)
+{
+ tpci200_idtable[0].vendor = TPCI200_VENDOR_ID;
+ tpci200_idtable[0].device = TPCI200_DEVICE_ID;
+ tpci200_idtable[0].subvendor = TPCI200_SUBVENDOR_ID;
+ tpci200_idtable[0].subdevice = TPCI200_SUBDEVICE_ID;
+ return pci_register_driver(&tpci200_pci_drv);
+}
+
+static void __exit tpci200_drvr_exit_module(void)
+{
+ struct tpci200_board *tpci200;
+ struct list_head *element, *next;
+
+ list_for_each_safe(element, next, &tpci200_list) {
+ tpci200 = list_entry(element, struct tpci200_board, list);
+ __tpci200_pci_remove(tpci200);
+ }
+
+ pci_unregister_driver(&tpci200_pci_drv);
+}
+
+MODULE_DESCRIPTION("TEWS TPCI-200 device driver");
+MODULE_LICENSE("GPL");
+module_init(tpci200_drvr_init_module);
+module_exit(tpci200_drvr_exit_module);
+
diff --git a/drivers/staging/ipack/bridges/tpci200.h b/drivers/staging/ipack/bridges/tpci200.h
new file mode 100644
index 0000000..e452da2
--- /dev/null
+++ b/drivers/staging/ipack/bridges/tpci200.h
@@ -0,0 +1,165 @@
+/**
+ * tpci200.h
+ *
+ * driver for the carrier TEWS TPCI-200
+ * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
+ * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia@...n.ch>, CERN
+ * Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias@...lia.com>, Igalia
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#ifndef _TPCI200_H_
+#define _TPCI200_H_
+
+#include <linux/version.h>
+#include <linux/limits.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/swab.h>
+#include <linux/io.h>
+
+#include "../ipack.h"
+
+#define TPCI200_SHORTNAME "TPCI200"
+
+#define TPCI200_NB_SLOT 0x4
+#define TPCI200_NB_BAR 0x6
+
+#define TPCI200_VENDOR_ID 0x1498
+#define TPCI200_DEVICE_ID 0x30C8
+#define TPCI200_SUBVENDOR_ID 0x1498
+#define TPCI200_SUBDEVICE_ID 0x300A
+
+#define TPCI200_IP_INTERFACE_BAR 2
+#define TPCI200_IO_ID_INT_SPACES_BAR 3
+#define TPCI200_MEM16_SPACE_BAR 4
+#define TPCI200_MEM8_SPACE_BAR 5
+
+#define TPCI200_REVISION_REG 0x00
+#define TPCI200_CONTROL_A_REG 0x02
+#define TPCI200_CONTROL_B_REG 0x04
+#define TPCI200_CONTROL_C_REG 0x06
+#define TPCI200_CONTROL_D_REG 0x08
+#define TPCI200_RESET_REG 0x0A
+#define TPCI200_STATUS_REG 0x0C
+
+#define TPCI200_IFACE_SIZE 0x100
+
+#define TPCI200_IO_SPACE_OFF 0x0000
+#define TPCI200_IO_SPACE_GAP 0x0100
+#define TPCI200_IO_SPACE_SIZE 0x0080
+#define TPCI200_ID_SPACE_OFF 0x0080
+#define TPCI200_ID_SPACE_GAP 0x0100
+#define TPCI200_ID_SPACE_SIZE 0x0040
+#define TPCI200_INT_SPACE_OFF 0x00C0
+#define TPCI200_INT_SPACE_GAP 0x0100
+#define TPCI200_INT_SPACE_SIZE 0x0040
+#define TPCI200_IOIDINT_SIZE 0x0400
+
+#define TPCI200_MEM8_GAP 0x00400000
+#define TPCI200_MEM8_SIZE 0x00400000
+#define TPCI200_MEM16_GAP 0x00800000
+#define TPCI200_MEM16_SIZE 0x00800000
+
+#define TPCI200_INT0_EN 0x0040
+#define TPCI200_INT1_EN 0x0080
+#define TPCI200_INT0_EDGE 0x0010
+#define TPCI200_INT1_EDGE 0x0020
+#define TPCI200_ERR_INT_EN 0x0008
+#define TPCI200_TIME_INT_EN 0x0004
+#define TPCI200_RECOVER_EN 0x0002
+#define TPCI200_CLK32 0x0001
+
+#define TPCI200_A_RESET 0x0001
+#define TPCI200_B_RESET 0x0002
+#define TPCI200_C_RESET 0x0004
+#define TPCI200_D_RESET 0x0008
+
+#define TPCI200_A_TIMEOUT 0x1000
+#define TPCI200_B_TIMEOUT 0x2000
+#define TPCI200_C_TIMEOUT 0x4000
+#define TPCI200_D_TIMEOUT 0x8000
+
+#define TPCI200_A_ERROR 0x0100
+#define TPCI200_B_ERROR 0x0200
+#define TPCI200_C_ERROR 0x0400
+#define TPCI200_D_ERROR 0x0800
+
+#define TPCI200_A_INT0 0x0001
+#define TPCI200_A_INT1 0x0002
+#define TPCI200_B_INT0 0x0004
+#define TPCI200_B_INT1 0x0008
+#define TPCI200_C_INT0 0x0010
+#define TPCI200_C_INT1 0x0020
+#define TPCI200_D_INT0 0x0040
+#define TPCI200_D_INT1 0x0080
+
+#define TPCI200_SLOT_INT_MASK 0x00FF
+
+#define VME_IOID_SPACE "IOID"
+#define VME_MEM_SPACE "MEM"
+
+/**
+ * struct slot_irq - slot IRQ definition.
+ * @vector Vector number
+ * @handler Handler called when IRQ arrives
+ * @arg Handler argument
+ * @name IRQ name
+ *
+ */
+struct slot_irq {
+ int vector;
+ int (*handler)(void *);
+ void *arg;
+ char name[IPACK_IRQ_NAME_SIZE];
+};
+
+/**
+ * struct tpci200_slot - data specific to the tpci200 slot.
+ * @slot_id Slot identification gived to external interface
+ * @irq Slot IRQ infos
+ * @io_phys IO physical base address register of the slot
+ * @id_phys ID physical base address register of the slot
+ * @mem_phys MEM physical base address register of the slot
+ *
+ */
+struct tpci200_slot {
+ struct ipack_device *dev;
+ struct slot_irq *irq;
+ struct ipack_addr_space io_phys;
+ struct ipack_addr_space id_phys;
+ struct ipack_addr_space mem_phys;
+};
+
+/**
+ * struct tpci200_infos - informations specific of the TPCI200 tpci200.
+ * @pci_dev PCI device
+ * @interface_regs Pointer to IP interface space (Bar 2)
+ * @ioidint_space Pointer to IP ID, IO and INT space (Bar 3)
+ * @mem8_space Pointer to MEM space (Bar 4)
+ * @access_lock Mutex lock for simultaneous access
+ *
+ */
+struct tpci200_infos {
+ struct pci_dev *pdev;
+ struct pci_device_id *id_table;
+ void *interface_regs;
+ void *ioidint_space;
+ void *mem8_space;
+ spinlock_t access_lock;
+ struct ipack_bus_device drv;
+};
+struct tpci200_board {
+ struct list_head list;
+ unsigned int number;
+ struct mutex mutex;
+ struct tpci200_slot *slots;
+ struct tpci200_infos *info;
+};
+
+#endif /* _TPCI200_H_ */
--
1.7.10
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists