| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1336476810-26945-4-git-send-email-peter.ujfalusi@ti.com>
Date: Tue, 8 May 2012 14:33:30 +0300
From: Peter Ujfalusi <peter.ujfalusi@...com>
To: Samuel Ortiz <sameo@...ux.intel.com>
Cc: linux-kernel@...r.kernel.org,
Misael Lopez Cruz <misael.lopez@...com>,
Benoit Cousson <b-cousson@...com>,
devicetree-discuss@...ts.ozlabs.org, Liam Girdwood <lrg@...com>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
peter.ujfalusi@...com
Subject: [PATCH v2 3/3] MFD: twl6040: Support for DT
Add support for DT based probing of twl6040 core.
Example of dts section for twl6040:
twl6040: twl6040@4b {
compatible = "ti,twl6040";
reg = <0x4b>;
interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
interrupt-parent = <&gic>;
twl6040,audpwron_gpio = <&gpio4 31 0>; /* gpio line 127 */
enable-active-high;
interrupt-controller;
#interrupt-cells = <1>;
vio-supply = <&v1v8>;
v2v1-supply = <&v2v1>;
twl6040_codec: twl6040@0 {
compatible = "ti,twl6040-codec";
interrupts = <1>;
};
};
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@...com>
---
Documentation/devicetree/bindings/mfd/twl6040.txt | 51 +++++++++++++++++++++
drivers/mfd/twl6040-core.c | 23 +++++++---
drivers/mfd/twl6040-irq.c | 6 +++
3 files changed, 74 insertions(+), 6 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/twl6040.txt
diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt
new file mode 100644
index 0000000..6d2399c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/twl6040.txt
@@ -0,0 +1,51 @@
+Texas Instruments TWL6040 family
+
+The TWL6040s are 8-channel high quality low-power audio codecs providing audio
+and vibra functionality on OMAP4+ platforms.
+They are connected ot the host processor via i2c for commands, McPDM for audio
+data and commands.
+
+Required properties:
+- compatible : Must be "ti,twl6040";
+- reg: must be 0x4b for i2c address
+- interrupts: twl6040 has one interrupt line connecteded to the main SoC
+- interrupt-parent: The parent interrupt controller
+- interrupt-controller: twl6040 support several interrupts internally, it is
+ considered as an interupt controller cascaded to the SoC core.
+#interrupt-cells = <1>;
+- twl6040,audpwron_gpio: Power on GPIO line for the twl6040
+
+- vio-supply: Regulator for the twl6040 VIO supply
+- v2v1-supply: Regulator for the twl6040 V2V1 supply
+
+Optional properties, nodes:
+- enable-active-high: To power on the twl6040 during boot.
+- Child nodes for audio functionality and for the vibra driver
+ For details on the child nodes see:
+ Documentation/devicetree/bindings/input/twl6040-vibra.txt - Vibra driver
+ Documentation/devicetree/bindings/sound/twl6040.txt - ASoC codec driver
+
+Example:
+/*
+ * 8-channel high quality low-power audio codec
+ * http://www.ti.com/lit/ds/symlink/twl6040.pdf
+ */
+twl6040: twl6040@4b {
+ compatible = "ti,twl6040";
+ reg = <0x4b>;
+ interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
+ interrupt-parent = <&gic>;
+ twl6040,audpwron_gpio = <&gpio4 31 0>; /* gpio line 127 */
+ enable-active-high;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ vio-supply = <&v1v8>;
+ v2v1-supply = <&v2v1>;
+
+ twl6040_codec: twl6040@0 {
+ compatible = "ti,twl6040-codec";
+ interrupts = <1>;
+ };
+};
diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c
index c50fba7..23b9771 100644
--- a/drivers/mfd/twl6040-core.c
+++ b/drivers/mfd/twl6040-core.c
@@ -29,6 +29,10 @@
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/i2c.h>
@@ -505,11 +509,12 @@ static int __devinit twl6040_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct twl6040_platform_data *pdata = client->dev.platform_data;
+ struct device_node *node = client->dev.of_node;
struct twl6040 *twl6040;
struct mfd_cell *cell = NULL;
int ret, children = 0;
- if (!pdata) {
+ if (!pdata && !node) {
dev_err(&client->dev, "Platform data is missing\n");
return -EINVAL;
}
@@ -560,9 +565,13 @@ static int __devinit twl6040_probe(struct i2c_client *client,
twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
/* ERRATA: Automatic power-up is not possible in ES1.0 */
- if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0)
- twl6040->audpwron = pdata->audpwron_gpio;
- else
+ if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0) {
+ if (pdata)
+ twl6040->audpwron = pdata->audpwron_gpio;
+ else
+ twl6040->audpwron = of_get_named_gpio(node,
+ "twl6040,audpwron_gpio", 0);
+ } else
twl6040->audpwron = -EINVAL;
if (gpio_is_valid(twl6040->audpwron)) {
@@ -589,7 +598,7 @@ static int __devinit twl6040_probe(struct i2c_client *client,
/* dual-access registers controlled by I2C only */
twl6040_set_bits(twl6040, TWL6040_REG_ACCCTL, TWL6040_I2CSEL);
- if (pdata->codec) {
+ if (pdata && pdata->codec) {
int irq = twl6040->irq_base + TWL6040_IRQ_PLUG;
cell = &twl6040->cells[children];
@@ -603,7 +612,7 @@ static int __devinit twl6040_probe(struct i2c_client *client,
children++;
}
- if (pdata->vibra) {
+ if (pdata && pdata->vibra) {
int irq = twl6040->irq_base + TWL6040_IRQ_VIB;
cell = &twl6040->cells[children];
@@ -623,6 +632,8 @@ static int __devinit twl6040_probe(struct i2c_client *client,
children, NULL, 0);
if (ret)
goto mfd_err;
+ } else if (node) {
+ ret = of_platform_populate(node, NULL, NULL, &client->dev);
} else {
dev_err(&client->dev, "No platform data found for children\n");
ret = -ENODEV;
diff --git a/drivers/mfd/twl6040-irq.c b/drivers/mfd/twl6040-irq.c
index 914978e..4b42543 100644
--- a/drivers/mfd/twl6040-irq.c
+++ b/drivers/mfd/twl6040-irq.c
@@ -25,6 +25,8 @@
#include <linux/module.h>
#include <linux/err.h>
#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/irqdomain.h>
#include <linux/interrupt.h>
#include <linux/mfd/core.h>
#include <linux/mfd/twl6040.h>
@@ -139,6 +141,7 @@ static irqreturn_t twl6040_irq_thread(int irq, void *data)
int twl6040_irq_init(struct twl6040 *twl6040)
{
+ struct device_node *node = twl6040->dev->of_node;
int i, nr_irqs, irq_base, ret;
u8 val;
@@ -158,6 +161,9 @@ int twl6040_irq_init(struct twl6040 *twl6040)
}
twl6040->irq_base = irq_base;
+ irq_domain_add_legacy(node, ARRAY_SIZE(twl6040_irqs), irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+
/* Register them with genirq */
for (i = irq_base; i < irq_base + nr_irqs; i++) {
irq_set_chip_data(i, twl6040);
--
1.7.8.6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists