linux-kernel - [PATCH 5/6] regulator: wm8350: Convert LDOs to set_voltage

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1336607255-4967-5-git-send-email-broonie@opensource.wolfsonmicro.com>
Date:	Thu, 10 May 2012 00:47:33 +0100
From:	Mark Brown <broonie@...nsource.wolfsonmicro.com>
To:	Liam Girdwood <lrg@...com>
Cc:	Yadwinder Singh <yadi.brar@...sung.com>,
	Graeme Gregory <gg@...mlogic.co.uk>,
	linux-kernel@...r.kernel.org, patches@...nsource.wolfsonmicro.com,
	Mark Brown <broonie@...nsource.wolfsonmicro.com>
Subject: [PATCH 5/6] regulator: wm8350: Convert LDOs to set_voltage_sel()

Since there are two linear ranges for the LDO voltages provide a voltage
mapping function and then use regulator_set_voltage_sel_regmap().

Signed-off-by: Mark Brown <broonie@...nsource.wolfsonmicro.com>
---
 drivers/regulator/wm8350-regulator.c |   38 +++++++---------------------------
 1 file changed, 8 insertions(+), 30 deletions(-)

diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c
index a618284..9efca21 100644
--- a/drivers/regulator/wm8350-regulator.c
+++ b/drivers/regulator/wm8350-regulator.c
@@ -671,13 +671,12 @@ static int wm8350_ldo_set_suspend_disable(struct regulator_dev *rdev)
 	return 0;
 }
 
-static int wm8350_ldo_set_voltage(struct regulator_dev *rdev, int min_uV,
-				  int max_uV, unsigned *selector)
+static int wm8350_ldo_map_voltage(struct regulator_dev *rdev, int min_uV,
+				  int max_uV)
 {
-	struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
-	int volt_reg, ldo = rdev_get_id(rdev), mV, min_mV = min_uV / 1000,
-		max_mV = max_uV / 1000;
-	u16 val;
+	int mV;
+	int min_mV = min_uV / 1000;
+	int max_mV = max_uV / 1000;
 
 	if (min_mV < 900 || min_mV > 3300)
 		return -EINVAL;
@@ -698,29 +697,7 @@ static int wm8350_ldo_set_voltage(struct regulator_dev *rdev, int min_uV,
 		BUG_ON(wm8350_ldo_val_to_mvolts(mV) < min_mV);
 	}
 
-	switch (ldo) {
-	case WM8350_LDO_1:
-		volt_reg = WM8350_LDO1_CONTROL;
-		break;
-	case WM8350_LDO_2:
-		volt_reg = WM8350_LDO2_CONTROL;
-		break;
-	case WM8350_LDO_3:
-		volt_reg = WM8350_LDO3_CONTROL;
-		break;
-	case WM8350_LDO_4:
-		volt_reg = WM8350_LDO4_CONTROL;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	*selector = mV;
-
-	/* all LDOs have same mV bits */
-	val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_LDO1_VSEL_MASK;
-	wm8350_reg_write(wm8350, volt_reg, val | mV);
-	return 0;
+	return mV;
 }
 
 static int wm8350_ldo_list_voltage(struct regulator_dev *rdev,
@@ -1057,7 +1034,8 @@ static struct regulator_ops wm8350_dcdc2_5_ops = {
 };
 
 static struct regulator_ops wm8350_ldo_ops = {
-	.set_voltage = wm8350_ldo_set_voltage,
+	.map_voltage = wm8350_ldo_map_voltage,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.list_voltage = wm8350_ldo_list_voltage,
 	.enable = regulator_enable_regmap,
-- 
1.7.10

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/