linux-kernel - [PATCH 07/12 v2] pinctrl: add sleep state definition

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1336725143-25563-1-git-send-email-linus.walleij@stericsson.com>
Date:	Fri, 11 May 2012 10:32:23 +0200
From:	Linus Walleij <linus.walleij@...ricsson.com>
To:	<linux-kernel@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>
Cc:	Stephen Warren <swarren@...dia.com>,
	Shawn Guo <shawn.guo@...escale.com>,
	Thomas Abraham <thomas.abraham@...aro.org>,
	Dong Aisheng <dong.aisheng@...aro.org>,
	Rajendra Nayak <rajendra.nayak@...aro.org>,
	Haojian Zhuang <haojian.zhuang@...vell.com>,
	Linus Walleij <linus.walleij@...aro.org>
Subject: [PATCH 07/12 v2] pinctrl: add sleep state definition

From: Linus Walleij <linus.walleij@...aro.org>

There is an IDLE definition in the pinctrl framework, but for
ux500 SLEEP is more apropriate.

I've added some comments on the semantics of the common states
so as to avoid misunderstandings.

ChangeLog v1->v2:
- Fixed terminology "on"->"into".

Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
---
 include/linux/pinctrl/pinctrl-state.h |   13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/include/linux/pinctrl/pinctrl-state.h b/include/linux/pinctrl/pinctrl-state.h
index 3920e28..634608dc 100644
--- a/include/linux/pinctrl/pinctrl-state.h
+++ b/include/linux/pinctrl/pinctrl-state.h
@@ -2,5 +2,18 @@
  * Standard pin control state definitions
  */
 
+/**
+ * @PINCTRL_STATE_DEFAULT: the state the pinctrl handle shall be put
+ *	into as default, usually this means the pins are up and ready to
+ *	be used by the device driver. This state is commonly used by
+ *	hogs to configure muxing and pins at boot.
+ * @PINCTRL_STATE_IDLE: the state the pinctrl handle shall be put into
+ *	when the pins are idle. Could typically be set from a
+ *	pm_runtime_suspend() operation.
+ * @PINCTRL_STATE_SLEEP: the state the pinctrl handle shall be put into
+ *	when the pins are sleeping. Could typically be set from a
+ *	common suspend() function.
+ */
 #define PINCTRL_STATE_DEFAULT "default"
 #define PINCTRL_STATE_IDLE "idle"
+#define PINCTRL_STATE_SLEEP "sleep"
-- 
1.7.9.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/