| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20120511194249.6567.21685.sendpatchset@w520>
Date: Sat, 12 May 2012 04:42:49 +0900
From: Magnus Damm <magnus.damm@...il.com>
To: linux-arm-kernel@...ts.infradead.org
Cc: horms@...ge.net.au, linux@....linux.org.uk, arnd@...db.de,
linux-sh@...r.kernel.org, linux-kernel@...r.kernel.org,
rjw@...k.pl, lethal@...ux-sh.org, olof@...om.net,
Magnus Damm <magnus.damm@...il.com>
Subject: [PATCH 06/06] mach-shmobile: Emma Mobile EV2 DT support V2
From: Magnus Damm <damm@...nsource.se>
This is EMEV2 DT support V2. The support is limited to
whatever devices that are complied in the kernel. At this
point we have UARTs handled by "em-uart" and a timer
handled by "em-sti". Clocks and SMP are not supported.
Signed-off-by: Magnus Damm <damm@...nsource.se>
---
Changes since V1:
- cleaned up the command line in the dts file
- removed call to clock setup code - this should be done through DT
- removed map io callback
- removed Makefile hacks, people will have to add them by themselves
arch/arm/boot/dts/emev2-kzm9d.dts | 66 ++++++++++++++++++++++++++++++++++
arch/arm/mach-shmobile/clock-emev2.c | 5 ++
arch/arm/mach-shmobile/setup-emev2.c | 47 +++++++++++++++++++++++-
3 files changed, 117 insertions(+), 1 deletion(-)
--- /dev/null
+++ work/arch/arm/boot/dts/emev2-kzm9d.dts 2012-05-12 03:59:57.000000000 +0900
@@ -0,0 +1,66 @@
+/dts-v1/;
+
+/ {
+ model = "EMEV2 KZM9D Board";
+ compatible = "renesas,emev2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ };
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ };
+ };
+
+ gic: interrupt-controller@...20000 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0xe0028000 0x1000>,
+ <0xe0020000 0x0100>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS1,115200n81";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x40000000 0x8000000>; /* 128 MB */
+ };
+
+ sti@...80000 {
+ compatible = "renesas,em-sti";
+ reg = <0xe0180000 0x54>;
+ interrupts = <0 125 0>;
+ };
+
+ uart@...20000 {
+ compatible = "renesas,em-uart";
+ reg = <0xe1020000 0x38>;
+ interrupts = <0 8 0>;
+ };
+
+ uart@...30000 {
+ compatible = "renesas,em-uart";
+ reg = <0xe1030000 0x38>;
+ interrupts = <0 9 0>;
+ };
+
+ uart@...40000 {
+ compatible = "renesas,em-uart";
+ reg = <0xe1040000 0x38>;
+ interrupts = <0 10 0>;
+ };
+
+ uart@...50000 {
+ compatible = "renesas,em-uart";
+ reg = <0xe1050000 0x38>;
+ interrupts = <0 11 0>;
+ };
+};
--- 0009/arch/arm/mach-shmobile/clock-emev2.c
+++ work/arch/arm/mach-shmobile/clock-emev2.c 2012-05-12 03:53:42.000000000 +0900
@@ -191,10 +191,15 @@ static int __init emev2_sclkdiv_register
static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("serial8250-em.0", &gclk_clks[GCLK_USIAU0_SCLK]),
+ CLKDEV_DEV_ID("e1020000.uart", &gclk_clks[GCLK_USIAU0_SCLK]),
CLKDEV_DEV_ID("serial8250-em.1", &gclk_clks[GCLK_USIBU1_SCLK]),
+ CLKDEV_DEV_ID("e1030000.uart", &gclk_clks[GCLK_USIBU1_SCLK]),
CLKDEV_DEV_ID("serial8250-em.2", &gclk_clks[GCLK_USIBU2_SCLK]),
+ CLKDEV_DEV_ID("e1040000.uart", &gclk_clks[GCLK_USIBU2_SCLK]),
CLKDEV_DEV_ID("serial8250-em.3", &gclk_clks[GCLK_USIBU3_SCLK]),
+ CLKDEV_DEV_ID("e1050000.uart", &gclk_clks[GCLK_USIBU3_SCLK]),
CLKDEV_DEV_ID("em_sti.0", &gclk_clks[GCLK_STI_SCLK]),
+ CLKDEV_DEV_ID("e0180000.sti", &gclk_clks[GCLK_STI_SCLK]),
};
void __init emev2_clock_init(void)
--- 0010/arch/arm/mach-shmobile/setup-emev2.c
+++ work/arch/arm/mach-shmobile/setup-emev2.c 2012-05-12 03:54:56.000000000 +0900
@@ -22,9 +22,11 @@
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/platform_data/gpio-em.h>
+#include <linux/of_platform.h>
#include <linux/delay.h>
#include <linux/input.h>
#include <linux/io.h>
+#include <linux/of_irq.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/emev2.h>
@@ -381,9 +383,14 @@ void __init emev2_add_standard_devices(v
ARRAY_SIZE(emev2_late_devices));
}
-void __init emev2_add_early_devices(void)
+void __init emev2_init_delay(void)
{
shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
+}
+
+void __init emev2_add_early_devices(void)
+{
+ emev2_init_delay();
early_platform_add_devices(emev2_early_devices,
ARRAY_SIZE(emev2_early_devices));
@@ -405,3 +412,41 @@ void __init emev2_init_irq(void)
/* Use GIC to handle interrupts */
gic_init(0, 29, gic_dist_base, gic_cpu_base);
}
+
+#ifdef CONFIG_USE_OF
+static const struct of_dev_auxdata emev2_auxdata_lookup[] __initconst = {
+ { }
+};
+
+void __init emev2_add_standard_devices_dt(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ emev2_auxdata_lookup, NULL);
+}
+
+static const struct of_device_id emev2_dt_irq_match[] = {
+ { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+ {},
+};
+
+static const char *emev2_boards_compat_dt[] __initdata = {
+ "renesas,emev2",
+ NULL,
+};
+
+void __init emev2_init_irq_dt(void)
+{
+ of_irq_init(emev2_dt_irq_match);
+}
+
+DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
+ .init_early = emev2_init_delay,
+ .nr_irqs = NR_IRQS_LEGACY,
+ .init_irq = emev2_init_irq_dt,
+ .handle_irq = gic_handle_irq,
+ .init_machine = emev2_add_standard_devices_dt,
+ .timer = &shmobile_timer,
+ .dt_compat = emev2_boards_compat_dt,
+MACHINE_END
+
+#endif /* CONFIG_USE_OF */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists