| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1336964086.24732.7.camel@phoenix>
Date: Mon, 14 May 2012 10:54:46 +0800
From: Axel Lin <axel.lin@...il.com>
To: linux-kernel@...r.kernel.org
Cc: Laxman Dewangan <ldewangan@...dia.com>, Liam Girdwood <lrg@...com>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>
Subject: [PATCH RFT 1/2] regulator: rc5t583: Convert to
regulator_list_voltage_linear()
Signed-off-by: Axel Lin <axel.lin@...il.com>
---
drivers/regulator/rc5t583-regulator.c | 28 +++++++++-------------------
1 files changed, 9 insertions(+), 19 deletions(-)
diff --git a/drivers/regulator/rc5t583-regulator.c b/drivers/regulator/rc5t583-regulator.c
index 7951260..f5d8537 100644
--- a/drivers/regulator/rc5t583-regulator.c
+++ b/drivers/regulator/rc5t583-regulator.c
@@ -41,9 +41,7 @@ struct rc5t583_regulator_info {
uint8_t deepsleep_reg;
/* Chip constraints on regulator behavior */
- int min_uV;
int max_uV;
- int step_uV;
/* Regulator specific turn-on delay and voltage settling time*/
int enable_uv_per_us;
@@ -62,24 +60,16 @@ struct rc5t583_regulator {
struct regulator_dev *rdev;
};
-static int rc5t583_list_voltage(struct regulator_dev *rdev, unsigned selector)
-{
- struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
- struct rc5t583_regulator_info *ri = reg->reg_info;
- return ri->min_uV + (ri->step_uV * selector);
-}
-
static int rc5t583_set_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV, unsigned *selector)
{
struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
- struct rc5t583_regulator_info *ri = reg->reg_info;
int sel, ret;
- if (min_uV < ri->min_uV)
- min_uV = ri->min_uV;
+ if (min_uV < rdev->desc->min_uV)
+ min_uV = rdev->desc->min_uV;
- sel = DIV_ROUND_UP(min_uV - ri->min_uV, ri->step_uV);
+ sel = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step);
if (sel >= rdev->desc->n_voltages) {
dev_err(&rdev->dev, "Invalid selector 0x%02x\n", sel);
@@ -100,7 +90,7 @@ static int rc5t583_regulator_enable_time(struct regulator_dev *rdev)
{
struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
int vsel = regulator_get_voltage_sel_regmap(rdev);
- int curr_uV = rc5t583_list_voltage(rdev, vsel);
+ int curr_uV = regulator_list_voltage_linear(rdev, vsel);
return DIV_ROUND_UP(curr_uV, reg->reg_info->enable_uv_per_us);
}
@@ -110,12 +100,12 @@ static int rc5t583_set_voltage_time_sel(struct regulator_dev *rdev,
{
struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
int old_uV, new_uV;
- old_uV = rc5t583_list_voltage(rdev, old_selector);
+ old_uV = regulator_list_voltage_linear(rdev, old_selector);
if (old_uV < 0)
return old_uV;
- new_uV = rc5t583_list_voltage(rdev, new_selector);
+ new_uV = regulator_list_voltage_linear(rdev, new_selector);
if (new_uV < 0)
return new_uV;
@@ -131,7 +121,7 @@ static struct regulator_ops rc5t583_ops = {
.enable_time = rc5t583_regulator_enable_time,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage = rc5t583_set_voltage,
- .list_voltage = rc5t583_list_voltage,
+ .list_voltage = regulator_list_voltage_linear,
.set_voltage_time_sel = rc5t583_set_voltage_time_sel,
};
@@ -141,9 +131,7 @@ static struct regulator_ops rc5t583_ops = {
.reg_disc_reg = RC5T583_REG_##_disc_reg, \
.disc_bit = _disc_bit, \
.deepsleep_reg = RC5T583_REG_##_id##DAC_DS, \
- .min_uV = _min_mv * 1000, \
.max_uV = _max_mv * 1000, \
- .step_uV = _step_uV, \
.enable_uv_per_us = _enable_mv * 1000, \
.change_uv_per_us = 40 * 1000, \
.deepsleep_id = RC5T583_DS_##_id, \
@@ -158,6 +146,8 @@ static struct regulator_ops rc5t583_ops = {
.vsel_mask = _vout_mask, \
.enable_reg = RC5T583_REG_##_en_reg, \
.enable_mask = BIT(_en_bit), \
+ .min_uV = _min_mv * 1000, \
+ .uV_step = _step_uV, \
}, \
}
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists