| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20120518222729.4A7663E07C8@localhost>
Date: Fri, 18 May 2012 16:27:29 -0600
From: Grant Likely <grant.likely@...retlab.ca>
To: Roland Stigge <stigge@...com.de>, linux-kernel@...r.kernel.org
Cc: Roland Stigge <stigge@...com.de>
Subject: Re: [PATCH 2/2] gpio: Device tree support for LPC32xx
On Fri, 18 May 2012 10:19:52 +0200, Roland Stigge <stigge@...com.de> wrote:
> This patch adds device tree support for gpio-lpc32xx.c.
>
> To register the various GPIO banks as (struct) gpio_chips via the same DT
> gpio-controller, we utilize the adjusted of_xlate API to manipulate the
> actually used struct gpio_chip.
>
> Signed-off-by: Roland Stigge <stigge@...com.de>
> Reviewed-by: Arnd Bergmann <arnd@...db.de>
> Signed-off-by: Grant Likely <grant.likely@...retlab.ca>
Applied, thanks.
g.
>
> ---
>
> Thanks to Jean-Christophe PLAGNIOL-VILLARD, Grant Likely, Arnd Bergmann, Jon
> Smirl, Mark Brown for reviewing!
>
> You can also pull from:
> git://git.antcom.de/linux-2.6.git dt/gpio
> http://git.antcom.de/linux-2.6.git dt/gpio
> http://git.antcom.de/?p=linux-2.6.git;a=shortlog;h=refs/heads/dt/gpio
>
> Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt | 43 +++++++++++++
> arch/arm/mach-lpc32xx/include/mach/gpio.h | 9 ++
> drivers/gpio/gpio-lpc32xx.c | 52 +++++++++++++++-
> 3 files changed, 102 insertions(+), 2 deletions(-)
>
> --- /dev/null
> +++ linux-2.6/Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt
> @@ -0,0 +1,43 @@
> +NXP LPC32xx SoC GPIO controller
> +
> +Required properties:
> +- compatible: must be "nxp,lpc3220-gpio"
> +- reg: Physical base address and length of the controller's registers.
> +- gpio-controller: Marks the device node as a GPIO controller.
> +- #gpio-cells: Should be 3:
> + 1) bank:
> + 0: GPIO P0
> + 1: GPIO P1
> + 2: GPIO P2
> + 3: GPIO P3
> + 4: GPI P3
> + 5: GPO P3
> + 2) pin number
> + 3) optional parameters:
> + - bit 0 specifies polarity (0 for normal, 1 for inverted)
> +- reg: Index of the GPIO group
> +
> +Example:
> +
> + gpio: gpio@...28000 {
> + compatible = "nxp,lpc3220-gpio";
> + reg = <0x40028000 0x1000>;
> + gpio-controller;
> + #gpio-cells = <3>; /* bank, pin, flags */
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + led0 {
> + gpios = <&gpio 5 1 1>; /* GPO_P3 1, active low */
> + linux,default-trigger = "heartbeat";
> + default-state = "off";
> + };
> +
> + led1 {
> + gpios = <&gpio 5 14 1>; /* GPO_P3 14, active low */
> + linux,default-trigger = "timer";
> + default-state = "off";
> + };
> + };
> --- linux-2.6.orig/arch/arm/mach-lpc32xx/include/mach/gpio.h
> +++ linux-2.6/arch/arm/mach-lpc32xx/include/mach/gpio.h
> @@ -1 +1,8 @@
> -/* empty */
> +#ifndef __MACH_GPIO_H
> +#define __MACH_GPIO_H
> +
> +#include "gpio-lpc32xx.h"
> +
> +#define ARCH_NR_GPIOS (LPC32XX_GPO_P3_GRP + LPC32XX_GPO_P3_MAX)
> +
> +#endif /* __MACH_GPIO_H */
> --- linux-2.6.orig/drivers/gpio/gpio-lpc32xx.c
> +++ linux-2.6/drivers/gpio/gpio-lpc32xx.c
> @@ -21,6 +21,9 @@
> #include <linux/io.h>
> #include <linux/errno.h>
> #include <linux/gpio.h>
> +#include <linux/of_gpio.h>
> +#include <linux/platform_device.h>
> +#include <linux/module.h>
>
> #include <mach/hardware.h>
> #include <mach/platform.h>
> @@ -454,10 +457,57 @@ static struct lpc32xx_gpio_chip lpc32xx_
> },
> };
>
> +/* Empty now, can be removed later when mach-lpc32xx is finally switched over
> + * to DT support
> + */
> void __init lpc32xx_gpio_init(void)
> {
> +}
> +
> +static int lpc32xx_of_xlate(struct gpio_chip *gc,
> + const struct of_phandle_args *gpiospec, u32 *flags)
> +{
> + /* Is this the correct bank? */
> + u32 bank = gpiospec->args[0];
> + if ((bank > ARRAY_SIZE(lpc32xx_gpiochip) ||
> + (gc != &lpc32xx_gpiochip[bank].chip)))
> + return -EINVAL;
> +
> + if (flags)
> + *flags = gpiospec->args[2];
> + return gpiospec->args[1];
> +}
> +
> +static int __devinit lpc32xx_gpio_probe(struct platform_device *pdev)
> +{
> int i;
>
> - for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++)
> + for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++) {
> + if (pdev->dev.of_node) {
> + lpc32xx_gpiochip[i].chip.of_xlate = lpc32xx_of_xlate;
> + lpc32xx_gpiochip[i].chip.of_gpio_n_cells = 3;
> + lpc32xx_gpiochip[i].chip.of_node = pdev->dev.of_node;
> + }
> gpiochip_add(&lpc32xx_gpiochip[i].chip);
> + }
> +
> + return 0;
> }
> +
> +#ifdef CONFIG_OF
> +static struct of_device_id lpc32xx_gpio_of_match[] __devinitdata = {
> + { .compatible = "nxp,lpc3220-gpio", },
> + { },
> +};
> +#endif
> +
> +static struct platform_driver lpc32xx_gpio_driver = {
> + .driver = {
> + .name = "lpc32xx-gpio",
> + .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(lpc32xx_gpio_of_match),
> + },
> + .probe = lpc32xx_gpio_probe,
> +};
> +
> +module_platform_driver(lpc32xx_gpio_driver);
--
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies, Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists