linux-kernel - [PATCH] ARM: LPC32xx: Adjust dts files to gpio dt binding

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:	Sat, 19 May 2012 12:28:53 +0200
From:	Roland Stigge <stigge@...com.de>
To:	arm@...nel.org, linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org, kevin.wells@....com,
	srinivas.bakki@....com
Cc:	Roland Stigge <stigge@...com.de>
Subject: [PATCH] ARM: LPC32xx: Adjust dts files to gpio dt binding

The GPIO devicetree binding in 3.5 doesn't register the various LPC32xx GPIO
banks via DT subnodes but always all at once, and changes the gpio referencing
to 3 cells (bank, gpio, flags). This patch adjusts the DTS files to this
binding that was just accepted to the gpio subsystem.

Signed-off-by: Roland Stigge <stigge@...com.de>

---

Applies to branch next/dt of arm-soc.git

You can also pull from

git://git.antcom.de/linux-2.6.git lpc32xx/dt

(where just this single commit is new)

 arch/arm/boot/dts/lpc32xx.dtsi |   41 ++---------------------------------------
 arch/arm/boot/dts/phy3250.dts  |    4 ++--
 2 files changed, 4 insertions(+), 41 deletions(-)

--- linux-2.6.orig/arch/arm/boot/dts/lpc32xx.dtsi
+++ linux-2.6/arch/arm/boot/dts/lpc32xx.dtsi
@@ -215,45 +215,8 @@
 			gpio: gpio@...28000 {
 				compatible = "nxp,lpc3220-gpio";
 				reg = <0x40028000 0x1000>;
-				/* create a private address space for enumeration */
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio_p0: gpio-bank@0 {
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <0>;
-				};
-
-				gpio_p1: gpio-bank@1 {
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <1>;
-				};
-
-				gpio_p2: gpio-bank@2 {
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <2>;
-				};
-
-				gpio_p3: gpio-bank@3 {
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <3>;
-				};
-
-				gpi_p3: gpio-bank@4 {
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <4>;
-				};
-
-				gpo_p3: gpio-bank@5 {
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <5>;
-				};
+				gpio-controller;
+				#gpio-cells = <3>; /* bank, pin, flags */
 			};
 
 			watchdog@...3C000 {
--- linux-2.6.orig/arch/arm/boot/dts/phy3250.dts
+++ linux-2.6/arch/arm/boot/dts/phy3250.dts
@@ -131,13 +131,13 @@
 		compatible = "gpio-leds";
 
 		led0 {
-			gpios = <&gpo_p3 1 1>; /* GPO_P3 1, GPIO 80, active low */
+			gpios = <&gpio 5 1 1>; /* GPO_P3 1, GPIO 80, active low */
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
 		led1 {
-			gpios = <&gpo_p3 14 1>; /* GPO_P3 14, GPIO 93, active low */
+			gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */
 			linux,default-trigger = "timer";
 			default-state = "off";
 		};
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/