| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1337491828.4017.1.camel@phoenix>
Date: Sun, 20 May 2012 13:30:28 +0800
From: Axel Lin <axel.lin@...il.com>
To: linux-kernel@...r.kernel.org
Cc: Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Liam Girdwood <lrg@...com>,
Marek Szyprowski <m.szyprowski@...sung.com>
Subject: [PATCH RFC/RFT v2] regulator: lp3971: Use
regulator_list_voltage_table()
Signed-off-by: Axel Lin <axel.lin@...il.com>
---
v2: Now the values in buck_voltage_map table are microvolt.
So in lp3971_dcdc_get_voltage() we should return
buck_voltage_map[reg] instead of 1000 * buck_voltage_map[reg].
drivers/regulator/lp3971.c | 66 +++++++++++++++----------------------------
1 files changed, 23 insertions(+), 43 deletions(-)
diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c
index 981bea9..7c6e3b8 100644
--- a/drivers/regulator/lp3971.c
+++ b/drivers/regulator/lp3971.c
@@ -65,11 +65,11 @@ static const int buck_base_addr[] = {
#define LP3971_BUCK_TARGET_VOL1_REG(x) (buck_base_addr[x])
#define LP3971_BUCK_TARGET_VOL2_REG(x) (buck_base_addr[x]+1)
-static const int buck_voltage_map[] = {
- 0, 800, 850, 900, 950, 1000, 1050, 1100,
- 1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500,
- 1550, 1600, 1650, 1700, 1800, 1900, 2500, 2800,
- 3000, 3300,
+static const unsigned int buck_voltage_map[] = {
+ 0, 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000,
+ 1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000,
+ 1550000, 1600000, 1650000, 1700000, 1800000, 1900000, 2500000, 2800000,
+ 3000000, 3300000,
};
#define BUCK_TARGET_VOL_MASK 0x3f
@@ -98,39 +98,19 @@ static const int buck_voltage_map[] = {
#define LDO_VOL_CONTR_SHIFT(x) ((x & 1) << 2)
#define LDO_VOL_CONTR_MASK 0x0f
-static const int ldo45_voltage_map[] = {
- 1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350,
- 1400, 1500, 1800, 1900, 2500, 2800, 3000, 3300,
+static const unsigned int ldo45_voltage_map[] = {
+ 1000000, 1050000, 1100000, 1150000, 1200000, 1250000, 1300000, 1350000,
+ 1400000, 1500000, 1800000, 1900000, 2500000, 2800000, 3000000, 3300000,
};
-static const int ldo123_voltage_map[] = {
- 1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500,
- 2600, 2700, 2800, 2900, 3000, 3100, 3200, 3300,
+static const unsigned int ldo123_voltage_map[] = {
+ 1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000,
+ 2600000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000, 3300000,
};
-static const int *ldo_voltage_map[] = {
- ldo123_voltage_map, /* LDO1 */
- ldo123_voltage_map, /* LDO2 */
- ldo123_voltage_map, /* LDO3 */
- ldo45_voltage_map, /* LDO4 */
- ldo45_voltage_map, /* LDO5 */
-};
-
-#define LDO_VOL_VALUE_MAP(x) (ldo_voltage_map[(x - LP3971_LDO1)])
-
#define LDO_VOL_MIN_IDX 0x00
#define LDO_VOL_MAX_IDX 0x0f
-static int lp3971_ldo_list_voltage(struct regulator_dev *dev, unsigned index)
-{
- int ldo = rdev_get_id(dev) - LP3971_LDO1;
-
- if (index > LDO_VOL_MAX_IDX)
- return -EINVAL;
-
- return 1000 * LDO_VOL_VALUE_MAP(ldo)[index];
-}
-
static int lp3971_ldo_is_enabled(struct regulator_dev *dev)
{
struct lp3971 *lp3971 = rdev_get_drvdata(dev);
@@ -169,7 +149,7 @@ static int lp3971_ldo_get_voltage(struct regulator_dev *dev)
reg = lp3971_reg_read(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo));
val = (reg >> LDO_VOL_CONTR_SHIFT(ldo)) & LDO_VOL_CONTR_MASK;
- return 1000 * LDO_VOL_VALUE_MAP(ldo)[val];
+ return dev->desc->volt_table[val];
}
static int lp3971_ldo_set_voltage_sel(struct regulator_dev *dev,
@@ -184,7 +164,7 @@ static int lp3971_ldo_set_voltage_sel(struct regulator_dev *dev,
}
static struct regulator_ops lp3971_ldo_ops = {
- .list_voltage = lp3971_ldo_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
.is_enabled = lp3971_ldo_is_enabled,
.enable = lp3971_ldo_enable,
.disable = lp3971_ldo_disable,
@@ -192,14 +172,6 @@ static struct regulator_ops lp3971_ldo_ops = {
.set_voltage_sel = lp3971_ldo_set_voltage_sel,
};
-static int lp3971_dcdc_list_voltage(struct regulator_dev *dev, unsigned index)
-{
- if (index < BUCK_TARGET_VOL_MIN_IDX || index > BUCK_TARGET_VOL_MAX_IDX)
- return -EINVAL;
-
- return 1000 * buck_voltage_map[index];
-}
-
static int lp3971_dcdc_is_enabled(struct regulator_dev *dev)
{
struct lp3971 *lp3971 = rdev_get_drvdata(dev);
@@ -240,7 +212,7 @@ static int lp3971_dcdc_get_voltage(struct regulator_dev *dev)
reg &= BUCK_TARGET_VOL_MASK;
if (reg <= BUCK_TARGET_VOL_MAX_IDX)
- val = 1000 * buck_voltage_map[reg];
+ val = buck_voltage_map[reg];
else {
val = 0;
dev_warn(&dev->dev, "chip reported incorrect voltage value.\n");
@@ -273,7 +245,7 @@ static int lp3971_dcdc_set_voltage_sel(struct regulator_dev *dev,
}
static struct regulator_ops lp3971_dcdc_ops = {
- .list_voltage = lp3971_dcdc_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
.is_enabled = lp3971_dcdc_is_enabled,
.enable = lp3971_dcdc_enable,
.disable = lp3971_dcdc_disable,
@@ -287,6 +259,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3971_LDO1,
.ops = &lp3971_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo123_voltage_map),
+ .volt_table = ldo123_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -295,6 +268,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3971_LDO2,
.ops = &lp3971_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo123_voltage_map),
+ .volt_table = ldo123_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -303,6 +277,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3971_LDO3,
.ops = &lp3971_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo123_voltage_map),
+ .volt_table = ldo123_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -311,6 +286,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3971_LDO4,
.ops = &lp3971_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo45_voltage_map),
+ .volt_table = ldo45_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -319,6 +295,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3971_LDO5,
.ops = &lp3971_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo45_voltage_map),
+ .volt_table = ldo45_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -327,6 +304,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3971_DCDC1,
.ops = &lp3971_dcdc_ops,
.n_voltages = ARRAY_SIZE(buck_voltage_map),
+ .volt_table = buck_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -335,6 +313,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3971_DCDC2,
.ops = &lp3971_dcdc_ops,
.n_voltages = ARRAY_SIZE(buck_voltage_map),
+ .volt_table = buck_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -343,6 +322,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3971_DCDC3,
.ops = &lp3971_dcdc_ops,
.n_voltages = ARRAY_SIZE(buck_voltage_map),
+ .volt_table = buck_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists