| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 21 May 2012 12:30:19 +0100
From: James Bottomley <James.Bottomley@...senPartnership.com>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-scsi <linux-scsi@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: [GIT PULL] First round of SCSI updates for the 3.4+ merge window
The patch contains the usual assortment of driver updates (be2iscsi,
bfa, bnx2i, fcoe, hpsa, isci, lpfc, megaraid, mpt2sas, pm8001, sg) plus
an assortment of other changes and fixes. Also new is the fact that the
isci update is delivered as a git merge (with signed tag).
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-misc
The short changelog is
Adam Radford (3):
megaraid_sas: Version and Changelog update
megaraid_sas: Add fpRead/WriteCapable, fpRead/WriteAcrossStripe checks
megaraid_sas: Optimize HostMSIxVectors setting
Akinobu Mita (1):
hpsa: use check_signature
Andrzej Jakowski (1):
isci: Changes in COMSAS timings enabling ISCI to detect buggy disc drives.
Dan Carpenter (1):
fcoe: remove a stray unlock
Dan Williams (12):
isci: fix oem parameter validation on single controller skus
isci: kill isci_host.shost
isci: fix interrupt disable
isci: fix 'link-up' events occur after 'start-complete'
isci: fix controller stop
isci: refactor initialization for S3/S4
isci: kill isci_port.domain_dev_list
isci: kill ->status, and ->state_lock in isci_host
isci: kill sci_phy_protocol and sci_request_protocol
isci: kill ->is_direct_attached
isci: improve 'invalid state' warnings
sd: limit the scope of the async probe domain
David Jeffery (1):
st: fix memory leak with >1MB tape I/O
Eddie Wai (2):
bnx2i: Updated version and copyright year
bnx2i: Added the setting of target can_queue via target_alloc
James Smart (20):
lpfc 8.3.31: Update lpfc to version 8.3.31
lpfc 8.3.31: Fixed system crash due to not providing SCSI error-handling host reset handler
lpfc 8.3.31: Fix bug with driver using the wrong xritag when sending an els echo
lpfc 8.3.31: Debug helper utility routines for dumping various SLI4 queues
lpfc 8.3.31: Fix unsol abts xri lookup
lpfc 8.3.31: Correct point-to-point mode discovery errors on LPe16xxx
lpfc 8.3.31: Reregister VPI for SLI3 after cable moved to new Saturn port
lpfc 8.3.31: Fix driver crash during back-to-back ramp events
lpfc 8.3.31: Fix log message for Mailbox command when no error is detected
lpfc 8.3.31: Revise FCP LOG for easier Finisar trace correlation
lpfc 8.3.31: Fix build warnings when debugfs is not defined
lpfc 8.3.31: Fix kernel panic when going into to sleep state
lpfc 8.3.31: Fix error message displayed even when not an error
lpfc 8.3.31: Fix Read Link status data
lpfc 8.3.31: Fixed system panic due to midlayer abort and driver complete race on SCSI cmd
lpfc 8.3.31: Fix unable to create vports on FCoE SLI4 adapter
lpfc 8.3.31: Fix initiator sending flogi after acking flogi from target
lpfc 8.3.31: Fix bug with driver not supporting the get controller attributes command
lpfc 8.3.31: Correct handling of SLI4-port XRI resource-provisioning profile change
lpfc 8.3.31: Fix bug with driver unload leaving a scsi host for a vport around
Jayamohan Kallickal (13):
be2iscsi: Adding bsg interface for be2iscsi
be2iscsi: Return async handle of unknown opcode to free list.
be2iscsi: Check ASYNC PDU Handle corresponds to HDR/DATA Handle
be2iscsi: Bump the driver Version
be2iscsi: Update external Branding to Emulex
be2iscsi: Fix the function return values.
be2iscsi: Code cleanup, removing the goto statement
be2iscsi: Fix double free of MCCQ info memory.
be2iscsi: Set num_cpu = 1 if pci_enable_msix fails
be2iscsi: Fix typo function name mismatch
be2iscsi: WRB Initialization and Failure code path change
be2iscsi: Fix in ASYNC PDU stitching logic.
be2iscsi: Fix in the Asynchronous Code Path
Jeff Skirvin (37):
isci: End the RNC resumption wait when the RNC is destroyed.
isci: Fixed RNC bug that lost the suspension or resumption during destroy
isci: Fix RNC AWAIT_SUSPENSION->INVALIDATING transition.
isci: Manage the IREQ_NO_AUTO_FREE_TAG under scic_lock.
isci: Remove obviated host callback list.
isci: Check IDEV_GONE before performing abort path operations.
isci: Restore the ATAPI device RNC management code.
isci: Don't wait for an RNC suspend if it's being destroyed.
isci: Change the phy control and link reset interface for HW reasons.
isci: Added timeouts to RNC suspensions in the abort path.
isci: Add protocol indicator for TMF requests.
isci: Directly control IREQ_ABORT_PATH_ACTIVE when completing TMFs.
isci: Wait for RNC resumption before leaving the abort path.
isci: Fix RNC suspend call for SCI_RESUMING state.
isci: Manage tag releases differently when aborting tasks.
isci: Callbacks to libsas occur under scic_lock and are synchronized.
isci: When in the abort path, defeat other resume calls until done.
isci: Implement waiting for suspend in the abort path.
isci: Make sure all TCs are terminated and cleaned in LUN reset.
isci: Manage the LLHANG timer enable/disable per-device.
isci: Save the suspension hint for upcoming suspensions.
isci: Fix the terminated I/O to not call sas_task_abort().
isci: Distinguish between remote device suspension cases
isci: Remove isci_device reqs_in_process and dev_node from isci_device.
isci: Only set IDEV_GONE in the device stop path.
isci: All pending TCs are terminated when the RNC is invalidated.
isci: Device access in the error path does not depend on IDEV_GONE.
isci: Add suspension cases for RNC INVALIDATING, POSTING states.
isci: Redesign device suspension, abort, cleanup.
isci: Escalate to I_T_Nexus_Reset when the device is gone.
isci: Remote device stop also suspends the RNC and terminates I/O.
isci: Remote device must be suspended for NCQ cleanup.
isci: Manage device suspensions during TC terminations.
isci: Terminate outstanding TCs on TX/RX RNC suspensions.
isci: Handle all suspending TC completions
isci: Fixed bug in resumption from RNC Tx/Rx suspend state.
isci: Manage the link layer hang detect timer for RNC suspensions.
John Soni Jose (2):
be2iscsi: Get Port State and Speed of the Adapter
be2iscsi: Get Initiator Name for the iSCSI_Host
Jörn Engel (9):
sg: constify sg_proc_leaf_arr
sg: remove sg_mutex
sg: completely protect sfds
sg: protect sdp->exclude
sg: prevent unwoken sleep
sg: remove closed flag
sg: use wait_event_interruptible()
sg: remove while (1) non-loop
sg: remove unnecessary indentation
K. Y. Srinivasan (1):
storvsc: Properly handle errors from the host
Krishna Gudipati (4):
bfa: Update the MAINTAINERS file.
bfa: Fix bfa logging for Logical port state change notification
bfa: sysfs model description fix.
bfa: Fix to defer vport delete handler invocation till firmware logo response.
Maciej Trela (1):
isci: enable BCN in sci_port_add_phy()
Mark Salyzyn (1):
pm8001: raise host can queue
Matt Bondurant (1):
hpsa: retry driver initiated commands on busy status
Matt Gates (2):
hpsa: refine interrupt handler locking for greater concurrency
hpsa: use multiple reply queues
Mike Christie (3):
fc class: fix scanning when devs are offline
be2iscsi: adding functionality to change network settings using iscsiadm
be2iscsi: Freeing of WRB and SGL Handle in cleanup task
Mike Maslenkin (1):
scsi_transport_spi: fix for unbalanced reference counting
Mike Miller (1):
hpsa: add new RAID level "1(ADM)"
Moger, Babu (3):
scsi_dh_alua: Optimize the STPG command
scsi_dh_alua: Store the PREF bit from RTPG
scsi_dh_alua: Inroduce the set_params interface scsi_dh_alua handler
Robert Love (1):
fcoe: Don't hold rtnl_mutex in fcoe_update_src_mac
Roland Dreier (1):
be2iscsi: Remove unused OFFSET_IN_PAGE() macro
Santosh Nayak (1):
pm8001: fix endian issue with code optimization.
Santosh Yaraganavi (1):
ufs: Assign UTRLBAU = upper_32_ bits(UTRLD base address)
Stephen M. Cameron (13):
hpsa: dial down lockup detection during firmware flash
hpsa: removed unused member maxQsinceinit
hpsa: factor out hpsa_free_irqs_and_disable_msix
hpsa: factor out tail calls to next_command() in process_(non)indexed_cmd()
hpsa: do aborts two ways
hpsa: add abort error handler function
hpsa: remove unused parameter from finish_cmd
hpsa: do not give up retry of driver cmds after only 3 retries
hpsa: do not read from controller unnecessarily in completion code
hpsa: suppress excessively chatty error messages
hpsa: enable bus master bit after pci_enable_device
hpsa: do not skip disabled devices
hpsa: call pci_disable_device on driver unload
Tom Jackson (1):
isci: Don't filter BROADCAST CHANGE primitives
Tomas Henzl (2):
mpt2sas: move the scsi_host_put to the right place
aacraid: add an iounmap call to aac_src_ioremap
Vasu Dev (3):
libfc: defer releasing master lport until complete fcoe interface cleanuped up
libfc: flush lport worker after its disabled
fcoe: remove lport from net device before doing per cpu rx thread cleanup
Venkatraman S (1):
ufs: Fix evaluation of UTP task completion code
Vinayak Holikatti (1):
ufs: Update MAINTAINERS
Yi Zou (1):
libfcoe: fix VN2VN N_Port_ID Beacon source MAC
nagalakshmi.nandigama@....com (12):
mpt2sas: Bump driver vesion to 13.100.00.00
mpt2sas: Fix for panic happening because of improper memory allocation
mpt2sas: Fix for hard drive going OFFLINE when hard reset issued and simultaneously another hard drive is hot unplugged
mpt2sas: Set the phy identifier of the end device to the phy number of the parent device it is linked to
mpt2sas : While enabling phy, read the current port number from sas iounit page 0 instead of page 1
mpt2sas: Fix linux driver sparse errors
mpt2sas: Fix security scan issues reported by source code analysis tool
mpt2sas: Improvement were made to better protect the sas_device, raid_device, and expander_device lists
mpt2sas : Perform Target Reset instead of HBA reset when a SATA_PASSTHROUGH cmd timeout happens
mpt2sas: Added multisegment mode support for Linux BSG Driver
mpt2sas: Removed redundant global mutex for IOCTLs
mpt2sas: MPI next revision header update
And the diffstat:
Documentation/scsi/ChangeLog.megaraid_sas | 8 +
MAINTAINERS | 9 +
drivers/scsi/Kconfig | 1 +
drivers/scsi/aacraid/src.c | 2 +
drivers/scsi/be2iscsi/be.h | 4 -
drivers/scsi/be2iscsi/be_cmds.c | 2 +
drivers/scsi/be2iscsi/be_cmds.h | 154 ++++-
drivers/scsi/be2iscsi/be_iscsi.c | 493 +++++++++++++--
drivers/scsi/be2iscsi/be_iscsi.h | 15 +
drivers/scsi/be2iscsi/be_main.c | 447 ++++++++------
drivers/scsi/be2iscsi/be_main.h | 17 +-
drivers/scsi/be2iscsi/be_mgmt.c | 522 +++++++++++++++-
drivers/scsi/be2iscsi/be_mgmt.h | 50 +-
drivers/scsi/bfa/bfa_fcs.h | 3 -
drivers/scsi/bfa/bfa_fcs_lport.c | 32 +-
drivers/scsi/bfa/bfad.c | 17 -
drivers/scsi/bfa/bfad_attr.c | 20 +-
drivers/scsi/bnx2i/57xx_iscsi_constants.h | 2 +-
drivers/scsi/bnx2i/57xx_iscsi_hsi.h | 2 +-
drivers/scsi/bnx2i/bnx2i.h | 2 +-
drivers/scsi/bnx2i/bnx2i_hwi.c | 2 +-
drivers/scsi/bnx2i/bnx2i_init.c | 6 +-
drivers/scsi/bnx2i/bnx2i_iscsi.c | 3 +-
drivers/scsi/bnx2i/bnx2i_sysfs.c | 2 +-
drivers/scsi/device_handler/scsi_dh_alua.c | 70 ++-
drivers/scsi/fcoe/fcoe.c | 41 +-
drivers/scsi/fcoe/fcoe.h | 4 +-
drivers/scsi/fcoe/fcoe_ctlr.c | 8 +-
drivers/scsi/hpsa.c | 683 ++++++++++++++++-----
drivers/scsi/hpsa.h | 85 ++-
drivers/scsi/hpsa_cmd.h | 37 +-
drivers/scsi/isci/host.c | 703 ++++++++--------------
drivers/scsi/isci/host.h | 124 ++--
drivers/scsi/isci/init.c | 212 ++++++-
drivers/scsi/isci/phy.c | 76 ++-
drivers/scsi/isci/phy.h | 9 +-
drivers/scsi/isci/port.c | 68 ++-
drivers/scsi/isci/port.h | 11 +-
drivers/scsi/isci/port_config.c | 18 +-
drivers/scsi/isci/probe_roms.c | 12 -
drivers/scsi/isci/probe_roms.h | 2 -
drivers/scsi/isci/registers.h | 8 +
drivers/scsi/isci/remote_device.c | 576 +++++++++++++-----
drivers/scsi/isci/remote_device.h | 63 +-
drivers/scsi/isci/remote_node_context.c | 393 ++++++++----
drivers/scsi/isci/remote_node_context.h | 43 +-
drivers/scsi/isci/request.c | 715 ++++++++++------------
drivers/scsi/isci/request.h | 125 +---
drivers/scsi/isci/scu_completion_codes.h | 2 +
drivers/scsi/isci/task.c | 800 +++++--------------------
drivers/scsi/isci/task.h | 132 +---
drivers/scsi/isci/unsolicited_frame_control.c | 30 +-
drivers/scsi/isci/unsolicited_frame_control.h | 6 +-
drivers/scsi/libfc/fc_lport.c | 2 +-
drivers/scsi/lpfc/lpfc.h | 4 +
drivers/scsi/lpfc/lpfc_bsg.c | 4 +-
drivers/scsi/lpfc/lpfc_bsg.h | 3 +-
drivers/scsi/lpfc/lpfc_crtn.h | 8 +-
drivers/scsi/lpfc/lpfc_debugfs.c | 46 ++
drivers/scsi/lpfc/lpfc_debugfs.h | 418 +++++++++++++
drivers/scsi/lpfc/lpfc_els.c | 141 ++++-
drivers/scsi/lpfc/lpfc_hbadisc.c | 18 +-
drivers/scsi/lpfc/lpfc_hw.h | 3 +
drivers/scsi/lpfc/lpfc_hw4.h | 18 +-
drivers/scsi/lpfc/lpfc_init.c | 377 +++++++-----
drivers/scsi/lpfc/lpfc_nportdisc.c | 9 +
drivers/scsi/lpfc/lpfc_scsi.c | 414 ++++++++-----
drivers/scsi/lpfc/lpfc_sli.c | 785 ++++++++++--------------
drivers/scsi/lpfc/lpfc_sli.h | 2 +-
drivers/scsi/lpfc/lpfc_sli4.h | 17 +-
drivers/scsi/lpfc/lpfc_version.h | 2 +-
drivers/scsi/megaraid/megaraid_sas.h | 6 +-
drivers/scsi/megaraid/megaraid_sas_base.c | 2 +-
drivers/scsi/megaraid/megaraid_sas_fp.c | 21 +-
drivers/scsi/megaraid/megaraid_sas_fusion.c | 4 +-
drivers/scsi/mpt2sas/mpi/mpi2.h | 7 +-
drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h | 68 ++-
drivers/scsi/mpt2sas/mpt2sas_base.c | 38 +-
drivers/scsi/mpt2sas/mpt2sas_base.h | 10 +-
drivers/scsi/mpt2sas/mpt2sas_ctl.c | 312 +++++-----
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 597 +++++++++---------
drivers/scsi/mpt2sas/mpt2sas_transport.c | 243 ++++++--
drivers/scsi/pm8001/pm8001_defs.h | 3 +-
drivers/scsi/pm8001/pm8001_hwi.c | 23 +-
drivers/scsi/pm8001/pm8001_hwi.h | 2 +-
drivers/scsi/pm8001/pm8001_init.c | 10 +-
drivers/scsi/scsi.c | 6 +
drivers/scsi/scsi_lib.c | 10 +-
drivers/scsi/scsi_pm.c | 2 +-
drivers/scsi/scsi_priv.h | 2 +
drivers/scsi/scsi_transport_fc.c | 24 +-
drivers/scsi/scsi_transport_spi.c | 4 +-
drivers/scsi/sd.c | 5 +-
drivers/scsi/sg.c | 183 +++---
drivers/scsi/st.h | 2 +-
drivers/scsi/storvsc_drv.c | 20 +-
drivers/scsi/ufs/ufshcd.c | 8 +-
include/scsi/iscsi_proto.h | 2 +
include/scsi/sas.h | 1 +
99 files changed, 6500 insertions(+), 4257 deletions(-)
James
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists