| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1337602686-28007-1-git-send-email-jhovold@gmail.com>
Date: Mon, 21 May 2012 14:18:06 +0200
From: Johan Hovold <jhovold@...il.com>
To: Jonathan Cameron <jic23@....ac.uk>
Cc: Rob Landley <rob@...dley.net>, Richard Purdie <rpurdie@...ys.net>,
Samuel Ortiz <sameo@...ux.intel.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Florian Tobias Schandinat <FlorianSchandinat@....de>,
Arnd Bergmann <arnd@...db.de>,
Andrew Morton <akpm@...ux-foundation.org>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-iio@...r.kernel.org, Johan Hovold <jhovold@...il.com>
Subject: [PATCH v5] iio: add LM3533 ambient-light-sensor driver
Add sub-driver for the ambient-light-sensor interface on National
Semiconductor / TI LM3533 lighting power chips.
The sensor interface can be used to control the LEDs and backlights of
the chip through defining five light zones and three sets of
corresponding output-current values.
The driver provides raw and mean adc readings along with the current
light zone through sysfs. A threshold event can be generated on zone
changes. The ALS-control output values can be set per zone for the three
current output channels.
Signed-off-by: Johan Hovold <jhovold@...il.com>
---
v2:
- reimplement using iio
- add sysfs-ABI documentation
v3
- use indexed channel
- fix sysfs-ABI documentation typo and style
- replace gain attribute with in_illuminance0_calibscale
- add calibscale to platform data
- fix adc register definitions
- replace to_lm3533_dev_attr macro with inline function
- fix device used for error reporting at irq allocation
- use iio device for error reporting during setup/enable
- rebase on staging-next
- fix header include paths
- use dev_to_iio_dev
- add IIO_CHAN_INFO_RAW to info mask
- use iio_device_{alloc,free}
v4
- move to driver/iio/light
- add events/in_illuminance0_threshY_hysteresis attributes
- fix device zone-boundary quirkiness
- clean up attribute handling
- replace calibscale with device-specific r_select attribute
v5
- drop r_select from sysfs ABI
- fix set_input_mode
- minor style changes
- register iio device last at probe
- use dev_name for iio_dev and irq name
- add out_currentY channels
.../ABI/testing/sysfs-bus-iio-light-lm3533-als | 62 ++
drivers/iio/Kconfig | 1 +
drivers/iio/Makefile | 1 +
drivers/iio/light/Kconfig | 22 +
drivers/iio/light/Makefile | 5 +
drivers/iio/light/lm3533-als.c | 932 ++++++++++++++++++++
6 files changed, 1023 insertions(+), 0 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als
create mode 100644 drivers/iio/light/Kconfig
create mode 100644 drivers/iio/light/Makefile
create mode 100644 drivers/iio/light/lm3533-als.c
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als b/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als
new file mode 100644
index 0000000..694a52c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als
@@ -0,0 +1,62 @@
+What: /sys/.../events/in_illuminance0_thresh_either_en
+Date: April 2012
+KernelVersion: 3.5
+Contact: Johan Hovold <jhovold@...il.com>
+Description:
+ Event generated when channel passes one of the four thresholds
+ in each direction (rising|falling) and a zone change occurs.
+ The corresponding light zone can be read from
+ in_illuminance0_zone.
+
+What: /sys/.../events/in_illuminance0_threshY_hysteresis
+Date: May 2012
+KernelVersion: 3.5
+Contact: Johan Hovold <jhovold@...il.com>
+Description:
+ Get the hysteresis for thresholds Y, that is,
+
+ threshY_hysteresis = threshY_raising - threshY_falling
+
+What: /sys/.../events/illuminance_threshY_falling_value
+What: /sys/.../events/illuminance_threshY_raising_value
+Date: April 2012
+KernelVersion: 3.5
+Contact: Johan Hovold <jhovold@...il.com>
+Description:
+ Specifies the value of threshold that the device is comparing
+ against for the events enabled by
+ in_illuminance0_thresh_either_en (0..255), where Y in 0..3.
+
+ Note that threshY_falling must be less than or equal to
+ threshY_raising.
+
+ These thresholds correspond to the eight zone-boundary
+ registers (boundaryY_{low,high}) and defines the five light
+ zones.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_zone
+Date: April 2012
+KernelVersion: 3.5
+Contact: Johan Hovold <jhovold@...il.com>
+Description:
+ Get the current light zone (0..4) as defined by the
+ in_illuminance0_threshY_{falling,rising} thresholds.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_currentY_raw
+Date: May 2012
+KernelVersion: 3.5
+Contact: Johan Hovold <jhovold@...il.com>
+Description:
+ Get output current for channel Y (0..255), that is,
+ out_currentY_currentZ_raw, where Z is the current zone.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_currentY_currentZ_raw
+Date: May 2012
+KernelVersion: 3.5
+Contact: Johan Hovold <jhovold@...il.com>
+Description:
+ Set the output current for channel out_currentY when in zone
+ Z (0..255), where Y in 0..2 and Z in 0..4.
+
+ These values correspond to the ALS-mapper target registers for
+ ALS-mapper Y + 1.
diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
index 56eecef..cacc74d 100644
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@@ -50,5 +50,6 @@ config IIO_CONSUMERS_PER_TRIGGER
source "drivers/iio/adc/Kconfig"
source "drivers/iio/amplifiers/Kconfig"
+source "drivers/iio/light/Kconfig"
endif # IIO
diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
index e425afd..060b674 100644
--- a/drivers/iio/Makefile
+++ b/drivers/iio/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_IIO_KFIFO_BUF) += kfifo_buf.o
obj-y += adc/
obj-y += amplifiers/
+obj-y += light/
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
new file mode 100644
index 0000000..db5618e
--- /dev/null
+++ b/drivers/iio/light/Kconfig
@@ -0,0 +1,22 @@
+#
+# Light sensors
+#
+menu "Light sensors"
+
+config SENSORS_LM3533
+ tristate "LM3533 ambient light sensor"
+ depends on MFD_LM3533
+ help
+ If you say yes here you get support for the ambient light sensor
+ interface on National Semiconductor / TI LM3533 Lighting Power
+ chips.
+
+ The sensor interface can be used to control the LEDs and backlights
+ of the chip through defining five light zones and three sets of
+ corresponding output-current values.
+
+ The driver provides raw and mean adc readings along with the current
+ light zone through sysfs. A threshold event can be generated on zone
+ changes. The ALS-control output values can be set per zone for the
+ three current output channels.
+endmenu
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
new file mode 100644
index 0000000..c1c23a0
--- /dev/null
+++ b/drivers/iio/light/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for IIO Light sensors
+#
+
+obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o
diff --git a/drivers/iio/light/lm3533-als.c b/drivers/iio/light/lm3533-als.c
new file mode 100644
index 0000000..c3e7bac
--- /dev/null
+++ b/drivers/iio/light/lm3533-als.c
@@ -0,0 +1,932 @@
+/*
+ * lm3533-als.c -- LM3533 Ambient Light Sensor driver
+ *
+ * Copyright (C) 2011-2012 Texas Instruments
+ *
+ * Author: Johan Hovold <jhovold@...il.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/atomic.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/mfd/core.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+#include <linux/mfd/lm3533.h>
+
+
+#define LM3533_ALS_RESISTOR_MIN 1
+#define LM3533_ALS_RESISTOR_MAX 127
+#define LM3533_ALS_CHANNEL_CURRENT_MAX 2
+#define LM3533_ALS_THRESH_MAX 3
+#define LM3533_ALS_ZONE_MAX 4
+
+#define LM3533_REG_ALS_RESISTOR_SELECT 0x30
+#define LM3533_REG_ALS_CONF 0x31
+#define LM3533_REG_ALS_ZONE_INFO 0x34
+#define LM3533_REG_ALS_READ_ADC_RAW 0x37
+#define LM3533_REG_ALS_READ_ADC_AVERAGE 0x38
+#define LM3533_REG_ALS_BOUNDARY_BASE 0x50
+#define LM3533_REG_ALS_TARGET_BASE 0x60
+
+#define LM3533_ALS_ENABLE_MASK 0x01
+#define LM3533_ALS_INPUT_MODE_MASK 0x02
+#define LM3533_ALS_INT_ENABLE_MASK 0x01
+
+#define LM3533_ALS_ZONE_SHIFT 2
+#define LM3533_ALS_ZONE_MASK 0x1c
+
+#define LM3533_ALS_FLAG_INT_ENABLED 1
+
+
+struct lm3533_als {
+ struct lm3533 *lm3533;
+ struct platform_device *pdev;
+
+ unsigned long flags;
+ int irq;
+
+ atomic_t zone;
+ struct mutex thresh_mutex;
+};
+
+
+static int lm3533_als_get_adc(struct iio_dev *indio_dev, bool average,
+ int *adc)
+{
+ struct lm3533_als *als = iio_priv(indio_dev);
+ u8 reg;
+ u8 val;
+ int ret;
+
+ if (average)
+ reg = LM3533_REG_ALS_READ_ADC_AVERAGE;
+ else
+ reg = LM3533_REG_ALS_READ_ADC_RAW;
+
+ ret = lm3533_read(als->lm3533, reg, &val);
+ if (ret) {
+ dev_err(&indio_dev->dev, "failed to read adc\n");
+ return ret;
+ }
+
+ *adc = val;
+
+ return 0;
+}
+
+static int _lm3533_als_get_zone(struct iio_dev *indio_dev, u8 *zone)
+{
+ struct lm3533_als *als = iio_priv(indio_dev);
+ u8 val;
+ int ret;
+
+ ret = lm3533_read(als->lm3533, LM3533_REG_ALS_ZONE_INFO, &val);
+ if (ret) {
+ dev_err(&indio_dev->dev, "failed to read zone\n");
+ return ret;
+ }
+
+ val = (val & LM3533_ALS_ZONE_MASK) >> LM3533_ALS_ZONE_SHIFT;
+ *zone = min_t(u8, val, LM3533_ALS_ZONE_MAX);
+
+ return 0;
+}
+
+static int lm3533_als_get_zone(struct iio_dev *indio_dev, u8 *zone)
+{
+ struct lm3533_als *als = iio_priv(indio_dev);
+ int ret;
+
+ if (test_bit(LM3533_ALS_FLAG_INT_ENABLED, &als->flags)) {
+ *zone = atomic_read(&als->zone);
+ } else {
+ ret = _lm3533_als_get_zone(indio_dev, zone);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/*
+ * channel output channel 0..2
+ * zone zone 0..4
+ */
+static inline u8 lm3533_als_get_target_reg(unsigned channel, unsigned zone)
+{
+ return LM3533_REG_ALS_TARGET_BASE + 5 * channel + zone;
+}
+
+static int lm3533_als_get_target(struct iio_dev *indio_dev, unsigned channel,
+ unsigned zone, u8 *val)
+{
+ struct lm3533_als *als = iio_priv(indio_dev);
+ u8 reg;
+ int ret;
+
+ if (channel > LM3533_ALS_CHANNEL_CURRENT_MAX)
+ return -EINVAL;
+
+ if (zone > LM3533_ALS_ZONE_MAX)
+ return -EINVAL;
+
+ reg = lm3533_als_get_target_reg(channel, zone);
+ ret = lm3533_read(als->lm3533, reg, val);
+ if (ret)
+ dev_err(&indio_dev->dev, "failed to get target current\n");
+
+ return ret;
+}
+
+static int lm3533_als_set_target(struct iio_dev *indio_dev, unsigned channel,
+ unsigned zone, u8 val)
+{
+ struct lm3533_als *als = iio_priv(indio_dev);
+ u8 reg;
+ int ret;
+
+ if (channel > LM3533_ALS_CHANNEL_CURRENT_MAX)
+ return -EINVAL;
+
+ if (zone > LM3533_ALS_ZONE_MAX)
+ return -EINVAL;
+
+ reg = lm3533_als_get_target_reg(channel, zone);
+ ret = lm3533_write(als->lm3533, reg, val);
+ if (ret)
+ dev_err(&indio_dev->dev, "failed to set target current\n");
+
+ return ret;
+}
+
+static int lm3533_als_get_current(struct iio_dev *indio_dev, unsigned channel,
+ int *val)
+{
+ u8 zone;
+ u8 target;
+ int ret;
+
+ ret = lm3533_als_get_zone(indio_dev, &zone);
+ if (ret)
+ return ret;
+
+ ret = lm3533_als_get_target(indio_dev, channel, zone, &target);
+ if (ret)
+ return ret;
+
+ *val = target;
+
+ return 0;
+}
+
+static int lm3533_als_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ int ret;
+
+ switch (mask) {
+ case 0:
+ switch (chan->type) {
+ case IIO_LIGHT:
+ ret = lm3533_als_get_adc(indio_dev, false, val);
+ break;
+ case IIO_CURRENT:
+ ret = lm3533_als_get_current(indio_dev, chan->channel,
+ val);
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case IIO_CHAN_INFO_AVERAGE_RAW:
+ ret = lm3533_als_get_adc(indio_dev, true, val);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (ret)
+ return ret;
+
+ return IIO_VAL_INT;
+}
+
+#define CHANNEL_CURRENT(_channel) \
+ { \
+ .type = IIO_CURRENT, \
+ .channel = _channel, \
+ .indexed = true, \
+ .output = true, \
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, \
+ }
+
+static const struct iio_chan_spec lm3533_als_channels[] = {
+ {
+ .type = IIO_LIGHT,
+ .channel = 0,
+ .indexed = true,
+ .info_mask = (IIO_CHAN_INFO_AVERAGE_RAW_SEPARATE_BIT |
+ IIO_CHAN_INFO_RAW_SEPARATE_BIT),
+ },
+ CHANNEL_CURRENT(0),
+ CHANNEL_CURRENT(1),
+ CHANNEL_CURRENT(2),
+};
+
+static irqreturn_t lm3533_als_isr(int irq, void *dev_id)
+{
+
+ struct iio_dev *indio_dev = dev_id;
+ struct lm3533_als *als = iio_priv(indio_dev);
+ u8 zone;
+ int ret;
+
+ /* Clear interrupt by reading the ALS zone register. */
+ ret = _lm3533_als_get_zone(indio_dev, &zone);
+ if (ret)
+ goto out;
+
+ atomic_set(&als->zone, zone);
+
+ iio_push_event(indio_dev,
+ IIO_UNMOD_EVENT_CODE(IIO_LIGHT,
+ 0,
+ IIO_EV_TYPE_THRESH,
+ IIO_EV_DIR_EITHER),
+ iio_get_time_ns());
+out:
+ return IRQ_HANDLED;
+}
+
+static int lm3533_als_set_int_mode(struct iio_dev *indio_dev, int enable)
+{
+ struct lm3533_als *als = iio_priv(indio_dev);
+ u8 mask = LM3533_ALS_INT_ENABLE_MASK;
+ u8 val;
+ int ret;
+
+ if (enable)
+ val = mask;
+ else
+ val = 0;
+
+ ret = lm3533_update(als->lm3533, LM3533_REG_ALS_ZONE_INFO, val, mask);
+ if (ret) {
+ dev_err(&indio_dev->dev, "failed to set int mode %d\n",
+ enable);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int lm3533_als_get_int_mode(struct iio_dev *indio_dev, int *enable)
+{
+ struct lm3533_als *als = iio_priv(indio_dev);
+ u8 mask = LM3533_ALS_INT_ENABLE_MASK;
+ u8 val;
+ int ret;
+
+ ret = lm3533_read(als->lm3533, LM3533_REG_ALS_ZONE_INFO, &val);
+ if (ret) {
+ dev_err(&indio_dev->dev, "failed to get int mode\n");
+ return ret;
+ }
+
+ *enable = !!(val & mask);
+
+ return 0;
+}
+
+static inline u8 lm3533_als_get_threshold_reg(unsigned nr, bool raising)
+{
+ u8 offset = !raising;
+
+ return LM3533_REG_ALS_BOUNDARY_BASE + 2 * nr + offset;
+}
+
+static int lm3533_als_get_threshold(struct iio_dev *indio_dev, unsigned nr,
+ bool raising, u8 *val)
+{
+ struct lm3533_als *als = iio_priv(indio_dev);
+ u8 reg;
+ int ret;
+
+ if (nr > LM3533_ALS_THRESH_MAX)
+ return -EINVAL;
+
+ reg = lm3533_als_get_threshold_reg(nr, raising);
+ ret = lm3533_read(als->lm3533, reg, val);
+ if (ret)
+ dev_err(&indio_dev->dev, "failed to get threshold\n");
+
+ return ret;
+}
+
+static int lm3533_als_set_threshold(struct iio_dev *indio_dev, unsigned nr,
+ bool raising, u8 val)
+{
+ struct lm3533_als *als = iio_priv(indio_dev);
+ u8 val2;
+ u8 reg, reg2;
+ int ret;
+
+ if (nr > LM3533_ALS_THRESH_MAX)
+ return -EINVAL;
+
+ reg = lm3533_als_get_threshold_reg(nr, raising);
+ reg2 = lm3533_als_get_threshold_reg(nr, !raising);
+
+ mutex_lock(&als->thresh_mutex);
+ ret = lm3533_read(als->lm3533, reg2, &val2);
+ if (ret) {
+ dev_err(&indio_dev->dev, "failed to get threshold\n");
+ goto out;
+ }
+ /*
+ * This device does not allow negative hysteresis (in fact, it uses
+ * whichever value is smaller as the lower bound) so we need to make
+ * sure that thresh_falling <= thresh_raising.
+ */
+ if ((raising && (val < val2)) || (!raising && (val > val2))) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = lm3533_write(als->lm3533, reg, val);
+ if (ret) {
+ dev_err(&indio_dev->dev, "failed to set threshold\n");
+ goto out;
+ }
+out:
+ mutex_unlock(&als->thresh_mutex);
+
+ return ret;
+}
+
+static int lm3533_als_get_hysteresis(struct iio_dev *indio_dev, unsigned nr,
+ u8 *val)
+{
+ struct lm3533_als *als = iio_priv(indio_dev);
+ u8 falling;
+ u8 raising;
+ int ret;
+
+ if (nr > LM3533_ALS_THRESH_MAX)
+ return -EINVAL;
+
+ mutex_lock(&als->thresh_mutex);
+ ret = lm3533_als_get_threshold(indio_dev, nr, false, &falling);
+ if (ret)
+ goto out;
+ ret = lm3533_als_get_threshold(indio_dev, nr, true, &raising);
+ if (ret)
+ goto out;
+
+ *val = raising - falling;
+out:
+ mutex_unlock(&als->thresh_mutex);
+
+ return ret;
+}
+
+static int show_thresh_either_en(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct lm3533_als *als = iio_priv(indio_dev);
+ int enable;
+ int ret;
+
+ if (als->irq) {
+ ret = lm3533_als_get_int_mode(indio_dev, &enable);
+ if (ret)
+ return ret;
+ } else {
+ enable = 0;
+ }
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n", enable);
+}
+
+static int store_thresh_either_en(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct lm3533_als *als = iio_priv(indio_dev);
+ unsigned long enable;
+ bool int_enabled;
+ u8 zone;
+ int ret;
+
+ if (!als->irq)
+ return -EBUSY;
+
+ if (kstrtoul(buf, 0, &enable))
+ return -EINVAL;
+
+ int_enabled = test_bit(LM3533_ALS_FLAG_INT_ENABLED, &als->flags);
+
+ if (enable && !int_enabled) {
+ ret = lm3533_als_get_zone(indio_dev, &zone);
+ if (ret)
+ return ret;
+
+ atomic_set(&als->zone, zone);
+
+ set_bit(LM3533_ALS_FLAG_INT_ENABLED, &als->flags);
+ }
+
+ ret = lm3533_als_set_int_mode(indio_dev, enable);
+ if (ret) {
+ if (!int_enabled)
+ clear_bit(LM3533_ALS_FLAG_INT_ENABLED, &als->flags);
+
+ return ret;
+ }
+
+ if (!enable)
+ clear_bit(LM3533_ALS_FLAG_INT_ENABLED, &als->flags);
+
+ return len;
+}
+
+static ssize_t show_zone(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ u8 zone;
+ int ret;
+
+ ret = lm3533_als_get_zone(indio_dev, &zone);
+ if (ret)
+ return ret;
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n", zone);
+}
+
+enum lm3533_als_attribute_type {
+ LM3533_ATTR_TYPE_HYSTERESIS,
+ LM3533_ATTR_TYPE_TARGET,
+ LM3533_ATTR_TYPE_THRESH_FALLING,
+ LM3533_ATTR_TYPE_THRESH_RAISING,
+};
+
+struct lm3533_als_attribute {
+ struct device_attribute dev_attr;
+ enum lm3533_als_attribute_type type;
+ u8 val1;
+ u8 val2;
+};
+
+static inline struct lm3533_als_attribute *
+to_lm3533_als_attr(struct device_attribute *attr)
+{
+ return container_of(attr, struct lm3533_als_attribute, dev_attr);
+}
+
+static ssize_t show_als_attr(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct lm3533_als_attribute *als_attr = to_lm3533_als_attr(attr);
+ u8 val;
+ int ret;
+
+ switch (als_attr->type) {
+ case LM3533_ATTR_TYPE_HYSTERESIS:
+ ret = lm3533_als_get_hysteresis(indio_dev, als_attr->val1,
+ &val);
+ break;
+ case LM3533_ATTR_TYPE_TARGET:
+ ret = lm3533_als_get_target(indio_dev, als_attr->val1,
+ als_attr->val2, &val);
+ break;
+ case LM3533_ATTR_TYPE_THRESH_FALLING:
+ ret = lm3533_als_get_threshold(indio_dev, als_attr->val1,
+ false, &val);
+ break;
+ case LM3533_ATTR_TYPE_THRESH_RAISING:
+ ret = lm3533_als_get_threshold(indio_dev, als_attr->val1,
+ true, &val);
+ break;
+ default:
+ ret = -ENXIO;
+ }
+
+ if (ret)
+ return ret;
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static ssize_t store_als_attr(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct lm3533_als_attribute *als_attr = to_lm3533_als_attr(attr);
+ u8 val;
+ int ret;
+
+ if (kstrtou8(buf, 0, &val))
+ return -EINVAL;
+
+ switch (als_attr->type) {
+ case LM3533_ATTR_TYPE_TARGET:
+ ret = lm3533_als_set_target(indio_dev, als_attr->val1,
+ als_attr->val2, val);
+ break;
+ case LM3533_ATTR_TYPE_THRESH_FALLING:
+ ret = lm3533_als_set_threshold(indio_dev, als_attr->val1,
+ false, val);
+ break;
+ case LM3533_ATTR_TYPE_THRESH_RAISING:
+ ret = lm3533_als_set_threshold(indio_dev, als_attr->val1,
+ true, val);
+ break;
+ default:
+ ret = -ENXIO;
+ }
+
+ if (ret)
+ return ret;
+
+ return len;
+}
+
+#define ALS_ATTR(_name, _mode, _show, _store, _type, _val1, _val2) \
+ { .dev_attr = __ATTR(_name, _mode, _show, _store), \
+ .type = _type, \
+ .val1 = _val1, \
+ .val2 = _val2 }
+
+#define LM3533_ALS_ATTR(_name, _mode, _show, _store, _type, _val1, _val2) \
+ struct lm3533_als_attribute lm3533_als_attr_##_name = \
+ ALS_ATTR(_name, _mode, _show, _store, _type, _val1, _val2)
+
+#define ALS_TARGET_ATTR_RW(_channel, _zone) \
+ LM3533_ALS_ATTR(out_current##_channel##_current##_zone##_raw, \
+ S_IRUGO | S_IWUSR, \
+ show_als_attr, store_als_attr, \
+ LM3533_ATTR_TYPE_TARGET, _channel, _zone)
+/*
+ * ALS output current values (ALS mapper targets)
+ *
+ * out_current[0-2]_current[0-4]_raw 0-255
+ */
+static ALS_TARGET_ATTR_RW(0, 0);
+static ALS_TARGET_ATTR_RW(0, 1);
+static ALS_TARGET_ATTR_RW(0, 2);
+static ALS_TARGET_ATTR_RW(0, 3);
+static ALS_TARGET_ATTR_RW(0, 4);
+
+static ALS_TARGET_ATTR_RW(1, 0);
+static ALS_TARGET_ATTR_RW(1, 1);
+static ALS_TARGET_ATTR_RW(1, 2);
+static ALS_TARGET_ATTR_RW(1, 3);
+static ALS_TARGET_ATTR_RW(1, 4);
+
+static ALS_TARGET_ATTR_RW(2, 0);
+static ALS_TARGET_ATTR_RW(2, 1);
+static ALS_TARGET_ATTR_RW(2, 2);
+static ALS_TARGET_ATTR_RW(2, 3);
+static ALS_TARGET_ATTR_RW(2, 4);
+
+#define ALS_THRESH_FALLING_ATTR_RW(_nr) \
+ LM3533_ALS_ATTR(in_illuminance0_thresh##_nr##_falling_value, \
+ S_IRUGO | S_IWUSR, \
+ show_als_attr, store_als_attr, \
+ LM3533_ATTR_TYPE_THRESH_FALLING, _nr, 0)
+
+#define ALS_THRESH_RAISING_ATTR_RW(_nr) \
+ LM3533_ALS_ATTR(in_illuminance0_thresh##_nr##_raising_value, \
+ S_IRUGO | S_IWUSR, \
+ show_als_attr, store_als_attr, \
+ LM3533_ATTR_TYPE_THRESH_RAISING, _nr, 0)
+/*
+ * ALS Zone thresholds (boundaries)
+ *
+ * in_illuminance0_thresh[0-3]_falling_value 0-255
+ * in_illuminance0_thresh[0-3]_raising_value 0-255
+ */
+static ALS_THRESH_FALLING_ATTR_RW(0);
+static ALS_THRESH_FALLING_ATTR_RW(1);
+static ALS_THRESH_FALLING_ATTR_RW(2);
+static ALS_THRESH_FALLING_ATTR_RW(3);
+
+static ALS_THRESH_RAISING_ATTR_RW(0);
+static ALS_THRESH_RAISING_ATTR_RW(1);
+static ALS_THRESH_RAISING_ATTR_RW(2);
+static ALS_THRESH_RAISING_ATTR_RW(3);
+
+#define ALS_HYSTERESIS_ATTR_RO(_nr) \
+ LM3533_ALS_ATTR(in_illuminance0_thresh##_nr##_hysteresis, \
+ S_IRUGO, show_als_attr, NULL, \
+ LM3533_ATTR_TYPE_HYSTERESIS, _nr, 0)
+/*
+ * ALS Zone threshold hysteresis
+ *
+ * threshY_hysteresis = threshY_raising - threshY_falling
+ *
+ * in_illuminance0_thresh[0-3]_hysteresis 0-255
+ * in_illuminance0_thresh[0-3]_hysteresis 0-255
+ */
+static ALS_HYSTERESIS_ATTR_RO(0);
+static ALS_HYSTERESIS_ATTR_RO(1);
+static ALS_HYSTERESIS_ATTR_RO(2);
+static ALS_HYSTERESIS_ATTR_RO(3);
+
+#define ILLUMINANCE_ATTR_RO(_name) \
+ DEVICE_ATTR(in_illuminance0_##_name, S_IRUGO, show_##_name, NULL)
+#define ILLUMINANCE_ATTR_RW(_name) \
+ DEVICE_ATTR(in_illuminance0_##_name, S_IRUGO | S_IWUSR , \
+ show_##_name, store_##_name)
+/*
+ * ALS Zone threshold-event enable
+ *
+ * in_illuminance0_thresh_either_en 0,1
+ */
+static ILLUMINANCE_ATTR_RW(thresh_either_en);
+
+/*
+ * ALS Current Zone
+ *
+ * in_illuminance0_zone 0-4
+ */
+static ILLUMINANCE_ATTR_RO(zone);
+
+static struct attribute *lm3533_als_event_attributes[] = {
+ &dev_attr_in_illuminance0_thresh_either_en.attr,
+ &lm3533_als_attr_in_illuminance0_thresh0_falling_value.dev_attr.attr,
+ &lm3533_als_attr_in_illuminance0_thresh0_hysteresis.dev_attr.attr,
+ &lm3533_als_attr_in_illuminance0_thresh0_raising_value.dev_attr.attr,
+ &lm3533_als_attr_in_illuminance0_thresh1_falling_value.dev_attr.attr,
+ &lm3533_als_attr_in_illuminance0_thresh1_hysteresis.dev_attr.attr,
+ &lm3533_als_attr_in_illuminance0_thresh1_raising_value.dev_attr.attr,
+ &lm3533_als_attr_in_illuminance0_thresh2_falling_value.dev_attr.attr,
+ &lm3533_als_attr_in_illuminance0_thresh2_hysteresis.dev_attr.attr,
+ &lm3533_als_attr_in_illuminance0_thresh2_raising_value.dev_attr.attr,
+ &lm3533_als_attr_in_illuminance0_thresh3_falling_value.dev_attr.attr,
+ &lm3533_als_attr_in_illuminance0_thresh3_hysteresis.dev_attr.attr,
+ &lm3533_als_attr_in_illuminance0_thresh3_raising_value.dev_attr.attr,
+ NULL
+};
+
+static struct attribute_group lm3533_als_event_attribute_group = {
+ .attrs = lm3533_als_event_attributes
+};
+
+static struct attribute *lm3533_als_attributes[] = {
+ &dev_attr_in_illuminance0_zone.attr,
+ &lm3533_als_attr_out_current0_current0_raw.dev_attr.attr,
+ &lm3533_als_attr_out_current0_current1_raw.dev_attr.attr,
+ &lm3533_als_attr_out_current0_current2_raw.dev_attr.attr,
+ &lm3533_als_attr_out_current0_current3_raw.dev_attr.attr,
+ &lm3533_als_attr_out_current0_current4_raw.dev_attr.attr,
+ &lm3533_als_attr_out_current1_current0_raw.dev_attr.attr,
+ &lm3533_als_attr_out_current1_current1_raw.dev_attr.attr,
+ &lm3533_als_attr_out_current1_current2_raw.dev_attr.attr,
+ &lm3533_als_attr_out_current1_current3_raw.dev_attr.attr,
+ &lm3533_als_attr_out_current1_current4_raw.dev_attr.attr,
+ &lm3533_als_attr_out_current2_current0_raw.dev_attr.attr,
+ &lm3533_als_attr_out_current2_current1_raw.dev_attr.attr,
+ &lm3533_als_attr_out_current2_current2_raw.dev_attr.attr,
+ &lm3533_als_attr_out_current2_current3_raw.dev_attr.attr,
+ &lm3533_als_attr_out_current2_current4_raw.dev_attr.attr,
+ NULL
+};
+
+static struct attribute_group lm3533_als_attribute_group = {
+ .attrs = lm3533_als_attributes
+};
+
+static int __devinit lm3533_als_set_input_mode(struct lm3533_als *als,
+ bool pwm_mode)
+{
+ u8 mask = LM3533_ALS_INPUT_MODE_MASK;
+ u8 val;
+ int ret;
+
+ if (pwm_mode)
+ val = mask; /* pwm input */
+ else
+ val = 0; /* analog input */
+
+ ret = lm3533_update(als->lm3533, LM3533_REG_ALS_CONF, val, mask);
+ if (ret) {
+ dev_err(&als->pdev->dev, "failed to set input mode %d\n",
+ pwm_mode);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __devinit lm3533_als_set_resistor(struct lm3533_als *als, u8 val)
+{
+ int ret;
+
+ if (val < LM3533_ALS_RESISTOR_MIN || val > LM3533_ALS_RESISTOR_MAX)
+ return -EINVAL;
+
+ ret = lm3533_write(als->lm3533, LM3533_REG_ALS_RESISTOR_SELECT, val);
+ if (ret) {
+ dev_err(&als->pdev->dev, "failed to set resistor\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __devinit lm3533_als_setup(struct lm3533_als *als,
+ struct lm3533_als_platform_data *pdata)
+{
+ int ret;
+
+ ret = lm3533_als_set_input_mode(als, pdata->pwm_mode);
+ if (ret)
+ return ret;
+
+ /* ALS input is always high impedance in PWM-mode. */
+ if (!pdata->pwm_mode) {
+ ret = lm3533_als_set_resistor(als, pdata->r_select);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __devinit lm3533_als_setup_irq(struct lm3533_als *als, void *dev)
+{
+ u8 mask = LM3533_ALS_INT_ENABLE_MASK;
+ int ret;
+
+ /* Make sure interrupts are disabled. */
+ ret = lm3533_update(als->lm3533, LM3533_REG_ALS_ZONE_INFO, 0, mask);
+ if (ret) {
+ dev_err(&als->pdev->dev, "failed to disable interrupts\n");
+ return ret;
+ }
+
+ ret = request_threaded_irq(als->irq, NULL, lm3533_als_isr,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ dev_name(&als->pdev->dev), dev);
+ if (ret) {
+ dev_err(&als->pdev->dev, "failed to request irq %d\n",
+ als->irq);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __devinit lm3533_als_enable(struct lm3533_als *als)
+{
+ u8 mask = LM3533_ALS_ENABLE_MASK;
+ int ret;
+
+ ret = lm3533_update(als->lm3533, LM3533_REG_ALS_CONF, mask, mask);
+ if (ret)
+ dev_err(&als->pdev->dev, "failed to enable ALS\n");
+
+ return ret;
+}
+
+static int lm3533_als_disable(struct lm3533_als *als)
+{
+ u8 mask = LM3533_ALS_ENABLE_MASK;
+ int ret;
+
+ ret = lm3533_update(als->lm3533, LM3533_REG_ALS_CONF, 0, mask);
+ if (ret)
+ dev_err(&als->pdev->dev, "failed to disable ALS\n");
+
+ return ret;
+}
+
+static const struct iio_info lm3533_als_info = {
+ .attrs = &lm3533_als_attribute_group,
+ .event_attrs = &lm3533_als_event_attribute_group,
+ .driver_module = THIS_MODULE,
+ .read_raw = &lm3533_als_read_raw,
+};
+
+static int __devinit lm3533_als_probe(struct platform_device *pdev)
+{
+ struct lm3533 *lm3533;
+ struct lm3533_als_platform_data *pdata;
+ struct lm3533_als *als;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ lm3533 = dev_get_drvdata(pdev->dev.parent);
+ if (!lm3533)
+ return -EINVAL;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data\n");
+ return -EINVAL;
+ }
+
+ indio_dev = iio_device_alloc(sizeof(*als));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ indio_dev->info = &lm3533_als_info;
+ indio_dev->channels = lm3533_als_channels;
+ indio_dev->num_channels = ARRAY_SIZE(lm3533_als_channels);
+ indio_dev->name = dev_name(&pdev->dev);
+ indio_dev->dev.parent = pdev->dev.parent;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ als = iio_priv(indio_dev);
+ als->lm3533 = lm3533;
+ als->pdev = pdev;
+ als->irq = lm3533->irq;
+ atomic_set(&als->zone, 0);
+ mutex_init(&als->thresh_mutex);
+
+ platform_set_drvdata(pdev, indio_dev);
+
+ if (als->irq) {
+ ret = lm3533_als_setup_irq(als, indio_dev);
+ if (ret)
+ goto err_free_dev;
+ }
+
+ ret = lm3533_als_setup(als, pdata);
+ if (ret)
+ goto err_free_irq;
+
+ ret = lm3533_als_enable(als);
+ if (ret)
+ goto err_free_irq;
+
+ ret = iio_device_register(indio_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register ALS\n");
+ goto err_disable;
+ }
+
+ return 0;
+
+err_disable:
+ lm3533_als_disable(als);
+err_free_irq:
+ if (als->irq)
+ free_irq(als->irq, indio_dev);
+err_free_dev:
+ iio_device_free(indio_dev);
+
+ return ret;
+}
+
+static int __devexit lm3533_als_remove(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct lm3533_als *als = iio_priv(indio_dev);
+
+ lm3533_als_set_int_mode(indio_dev, false);
+ iio_device_unregister(indio_dev);
+ lm3533_als_disable(als);
+ if (als->irq)
+ free_irq(als->irq, indio_dev);
+ iio_device_free(indio_dev);
+
+ return 0;
+}
+
+static struct platform_driver lm3533_als_driver = {
+ .driver = {
+ .name = "lm3533-als",
+ .owner = THIS_MODULE,
+ },
+ .probe = lm3533_als_probe,
+ .remove = __devexit_p(lm3533_als_remove),
+};
+module_platform_driver(lm3533_als_driver);
+
+MODULE_AUTHOR("Johan Hovold <jhovold@...il.com>");
+MODULE_DESCRIPTION("LM3533 Ambient Light Sensor driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lm3533-als");
--
1.7.8.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists