| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <alpine.DEB.2.00.1205211404350.15733@chino.kir.corp.google.com>
Date: Mon, 21 May 2012 14:06:38 -0700 (PDT)
From: David Rientjes <rientjes@...gle.com>
To: Jonghwa Lee <jonghwa3.lee@...sung.com>
cc: linux-kernel@...r.kernel.org, Samuel Oritz <sameo@...ux.intel.com>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Liam Gridwodd <lrg@...com>,
Alessandro Zummo <a.zummo@...ertech.it>,
Kyungmin Park <kyungmin.park@...sung.com>,
MyungJoo Ham <myungjoo.ham@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Chiwoong Byun <woong.byun@...sung.com>
Subject: Re: [PATCH v4 2/3] regulator: MAX77686: Add Maxim 77686 regulator
driver
On Mon, 21 May 2012, Jonghwa Lee wrote:
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index 36db5a4..8e2ebad 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -195,6 +195,14 @@ config REGULATOR_MAX8998
> via I2C bus. The provided regulator is suitable for S3C6410
> and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
>
> +config REGULATOR_MAX77686
> + tristate "Maxim 77686 regulator"
> + depends on MFD_MAX77686
> + help
> + This driver controls a Maxim 77686 regulator
> + via I2C bus. The provided regulator is suitable for
> + Exynos-4 chips to control VARM and VINT voltages.
> +
> config REGULATOR_PCAP
> tristate "Motorola PCAP2 regulator driver"
> depends on EZX_PCAP
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index 94b5274..008931b 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -30,6 +30,7 @@ obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o
> obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o
> obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o
> obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
> +obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o
> obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
> obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
> obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
> diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c
> new file mode 100644
> index 0000000..cb8ec6c
> --- /dev/null
> +++ b/drivers/regulator/max77686.c
> @@ -0,0 +1,438 @@
> +/*
> + * max77686.c - Regulator driver for the Maxim 77686
> + *
> + * Copyright (C) 2012 Samsung Electronics
> + * Chiwoong Byun <woong.byun@...sung.com>
> + * Jonghwa Lee <jonghwa3.lee@...sung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + *
> + * This driver is based on max8997.c
> + */
> +#define pr_fmt(fmt) "%s: " fmt, __func__
> +
> +#include <linux/bug.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/gpio.h>
> +#include <linux/slab.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/machine.h>
> +#include <linux/mfd/max77686.h>
> +#include <linux/mfd/max77686-private.h>
> +
> +#define MAX77686_LDO_MINUV 800000
> +#define MAX77686_LDO_UVSTEP 50000
> +#define MAX77686_LDO_LOW_MINUV 800000
> +#define MAX77686_LDO_LOW_UVSTEP 25000
> +#define MAX77686_BUCK_MINUV 750000
> +#define MAX77686_BUCK_UVSTEP 50000
> +#define MAX77686_DVS_MINUV 600000
> +#define MAX77686_DVS_UVSTEP 12500
> +
> +#define MAX77686_OPMODE_SHIFT 6
> +#define MAX77686_OPMODE_BUCK234_SHIFT 4
> +#define MAX77686_OPMODE_MASK 0x3
> +
> +#define MAX77686_VSEL_MASK 0x3f
> +#define MAX77686_DVS_VSEL_MASK 0xff
> +
> +#define MAX77686_RAMP_RATE 100
> +
> +#define MAX77686_REGULATORS 35
> +#define MAX77686_LDOS 26
> +
> +struct max77686_data {
> + struct device *dev;
> + struct max77686_dev *iodev;
> + int num_regulators;
> + struct regulator_dev **rdev;
> + int ramp_delay; /* in mV/us */
> +
> + struct max77686_opmode_data *opmode_data;
> +
> + u8 buck2_vol[8];
> + u8 buck3_vol[8];
> + u8 buck4_vol[8];
> +};
> +
> +static int max77686_get_enable_register(int rid, unsigned int *reg,
> + unsigned int *mask)
> +{
> + switch (rid) {
> + case MAX77686_LDO1 ... MAX77686_LDO26:
> + *reg = MAX77686_REG_LDO1CTRL1 + (rid - MAX77686_LDO1);
> + *mask = MAX77686_OPMODE_MASK << MAX77686_OPMODE_SHIFT;
> + break;
> + case MAX77686_BUCK1:
> + *reg = MAX77686_REG_BUCK1CTRL;
> + *mask = MAX77686_OPMODE_MASK;
> + break;
> + case MAX77686_BUCK2:
> + case MAX77686_BUCK3:
> + case MAX77686_BUCK4:
> + *reg = MAX77686_REG_BUCK2CTRL1 + (rid - MAX77686_BUCK2) * 10;
> + *mask = MAX77686_OPMODE_MASK << MAX77686_OPMODE_BUCK234_SHIFT;
> + break;
> + case MAX77686_BUCK5 ... MAX77686_BUCK9:
> + *reg = MAX77686_REG_BUCK5CTRL + (rid - MAX77686_BUCK5) * 2;
> + *mask = MAX77686_OPMODE_MASK;
> + break;
> + case MAX77686_EN32KHZ_AP ... MAX77686_P32KH:
> + *reg = MAX77686_REG_32KHZ;
> + *mask = 0x01 << (rid - MAX77686_EN32KHZ_AP);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int max77686_get_voltage_register(int rid, unsigned int *_reg,
> + unsigned int *_mask)
> +{
> + int reg, mask = MAX77686_VSEL_MASK;
> +
> + switch (rid) {
> + case MAX77686_LDO1 ... MAX77686_LDO26:
> + reg = MAX77686_REG_LDO1CTRL1 + (rid - MAX77686_LDO1);
> + break;
> + case MAX77686_BUCK1:
> + reg = MAX77686_REG_BUCK1OUT;
> + break;
> + case MAX77686_BUCK2:
> + reg = MAX77686_REG_BUCK2DVS1;
> + mask = MAX77686_DVS_VSEL_MASK;
> + break;
> + case MAX77686_BUCK3:
> + reg = MAX77686_REG_BUCK3DVS1;
> + mask = MAX77686_DVS_VSEL_MASK;
> + break;
> + case MAX77686_BUCK4:
> + reg = MAX77686_REG_BUCK4DVS1;
> + mask = MAX77686_DVS_VSEL_MASK;
> + break;
> + case MAX77686_BUCK5 ... MAX77686_BUCK9:
> + reg = MAX77686_REG_BUCK5OUT + (rid - MAX77686_BUCK5) * 2;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + *_reg = reg;
> + *_mask = mask;
> +
> + return 0;
> +}
> +
> +static int max77686_set_voltage_time_sel(struct regulator_dev *rdev,
> + unsigned int old_selector, unsigned int new_selector)
> +{
> + struct max77686_data *max77686 = rdev_get_drvdata(rdev);
> + int rid = rdev_get_id(rdev);
> +
> + switch (rid) {
> + case MAX77686_BUCK2 ... MAX77686_BUCK4:
> + if (old_selector < new_selector)
> + return (DIV_ROUND_UP(rdev->desc->uV_step
> + * (new_selector - old_selector),
> + max77686->ramp_delay * 1000));
> + case MAX77686_BUCK1:
> + case MAX77686_BUCK5 ... MAX77686_BUCK9:
> + /* Unconditionally 100 mV/us */
> + if (old_selector < new_selector)
> + return (DIV_ROUND_UP(rdev->desc->uV_step
> + * (new_selector - old_selector), 100000));
> + default:
> + return 0;
> + }
> +}
> +
> +static struct regulator_ops max77686_ldo_ops = {
> + .list_voltage = regulator_list_voltage_linear,
> + .is_enabled = regulator_is_enabled_regmap,
> + .enable = regulator_enable_regmap,
> + .disable = regulator_disable_regmap,
> + .get_voltage_sel = regulator_get_voltage_sel_regmap,
> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
> + .set_voltage_time_sel = max77686_set_voltage_time_sel,
> +};
> +
> +static struct regulator_ops max77686_buck_ops = {
> + .list_voltage = regulator_list_voltage_linear,
> + .is_enabled = regulator_is_enabled_regmap,
> + .enable = regulator_enable_regmap,
> + .disable = regulator_disable_regmap,
> + .get_voltage_sel = regulator_get_voltage_sel_regmap,
> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
> + .set_voltage_time_sel = max77686_set_voltage_time_sel,
> +};
> +
> +static struct regulator_ops max77686_fixedvolt_ops = {
> + .list_voltage = regulator_list_voltage_linear,
> + .is_enabled = regulator_is_enabled_regmap,
> + .enable = regulator_enable_regmap,
> + .disable = regulator_disable_regmap,
> +};
> +
> +#define regulator_desc_ldo(num) { \
> + .name = "LDO"#num, \
> + .id = MAX77686_LDO##num, \
> + .ops = &max77686_ldo_ops, \
> + .type = REGULATOR_VOLTAGE, \
> + .owner = THIS_MODULE, \
> + .min_uV = MAX77686_LDO_MINUV, \
> + .uV_step = MAX77686_LDO_UVSTEP, \
> + .n_voltages = MAX77686_VSEL_MASK + 1, \
> +}
> +#define regulator_desc_ldo_low(num) { \
> + .name = "LDO"#num, \
> + .id = MAX77686_LDO##num, \
> + .ops = &max77686_ldo_ops, \
> + .type = REGULATOR_VOLTAGE, \
> + .owner = THIS_MODULE, \
> + .min_uV = MAX77686_LDO_LOW_MINUV, \
> + .uV_step = MAX77686_LDO_LOW_UVSTEP, \
> + .n_voltages = MAX77686_VSEL_MASK + 1, \
> +}
> +#define regulator_desc_buck(num) { \
> + .name = "BUCK"#num, \
> + .id = MAX77686_BUCK##num, \
> + .ops = &max77686_buck_ops, \
> + .type = REGULATOR_VOLTAGE, \
> + .owner = THIS_MODULE, \
> + .min_uV = MAX77686_BUCK_MINUV, \
> + .uV_step = MAX77686_BUCK_UVSTEP, \
> + .n_voltages = MAX77686_VSEL_MASK + 1, \
> +}
> +#define regulator_desc_buck_dvs(num) { \
> + .name = "BUCK"#num, \
> + .id = MAX77686_BUCK##num, \
> + .ops = &max77686_buck_ops, \
> + .type = REGULATOR_VOLTAGE, \
> + .owner = THIS_MODULE, \
> + .min_uV = MAX77686_DVS_MINUV, \
> + .uV_step = MAX77686_DVS_UVSTEP, \
> + .n_voltages = MAX77686_DVS_VSEL_MASK + 1, \
> +}
> +static struct regulator_desc regulators[] = {
> + regulator_desc_ldo_low(1),
> + regulator_desc_ldo_low(2),
> + regulator_desc_ldo(3),
> + regulator_desc_ldo(4),
> + regulator_desc_ldo(5),
> + regulator_desc_ldo_low(6),
> + regulator_desc_ldo_low(7),
> + regulator_desc_ldo_low(8),
> + regulator_desc_ldo(9),
> + regulator_desc_ldo(10),
> + regulator_desc_ldo(11),
> + regulator_desc_ldo(12),
> + regulator_desc_ldo(13),
> + regulator_desc_ldo(14),
> + regulator_desc_ldo_low(15),
> + regulator_desc_ldo(16),
> + regulator_desc_ldo(17),
> + regulator_desc_ldo(18),
> + regulator_desc_ldo(19),
> + regulator_desc_ldo(20),
> + regulator_desc_ldo(21),
> + regulator_desc_ldo(22),
> + regulator_desc_ldo(23),
> + regulator_desc_ldo(24),
> + regulator_desc_ldo(25),
> + regulator_desc_ldo(26),
> + regulator_desc_buck(1),
> + regulator_desc_buck_dvs(2),
> + regulator_desc_buck_dvs(3),
> + regulator_desc_buck_dvs(4),
> + regulator_desc_buck(5),
> + regulator_desc_buck(6),
> + regulator_desc_buck(7),
> + regulator_desc_buck(8),
> + regulator_desc_buck(9),
> +};
> +
> +static __devinit int max77686_pmic_probe(struct platform_device *pdev)
> +{
> + struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
> + struct max77686_platform_data *pdata = dev_get_platdata(iodev->dev);
> + struct regulator_dev **rdev;
> + struct max77686_data *max77686;
> + struct regulator_init_data **init_data;
> + int i, size;
> + int ret = 0;
> + struct regulator_config config;
> + unsigned int data = 0;
> +
> + dev_dbg(&pdev->dev, "%s\n", __func__);
> +
> + max77686 = devm_kzalloc(&pdev->dev, sizeof(struct max77686_data),
> + GFP_KERNEL);
> + if (!max77686)
> + return -ENOMEM;
> +
> + size = sizeof(struct regulator_dev *) * MAX77686_REGULATORS;
> + max77686->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
> + if (!max77686->rdev)
> + return -ENOMEM;
Does this leak max77686?
> +
> + rdev = max77686->rdev;
> + max77686->dev = &pdev->dev;
> + max77686->iodev = iodev;
> + if (pdata)
> + max77686->num_regulators = pdata->num_regulators;
> + platform_set_drvdata(pdev, max77686);
> + init_data = devm_kzalloc(&pdev->dev,
> + sizeof(struct regulator_init_data *)
> + * MAX77686_REGULATORS, GFP_KERNEL);
No error handling, which will cause a NULL pointer later when you use this
array.
> + config.dev = max77686->dev;
> + config.regmap = iodev->regmap;
> + config.driver_data = max77686;
> +
> + if (pdata)
> + max77686->opmode_data = pdata->opmode_data;
> +
> + max77686->ramp_delay = MAX77686_RAMP_RATE; /* Set 0x3 for RAMP */
> + regmap_update_bits(max77686->iodev->regmap,
> + MAX77686_REG_BUCK2CTRL1, 0xC0, 0xC0);
> + regmap_update_bits(max77686->iodev->regmap,
> + MAX77686_REG_BUCK3CTRL1, 0xC0, 0xC0);
> + regmap_update_bits(max77686->iodev->regmap,
> + MAX77686_REG_BUCK4CTRL1, 0xC0, 0xC0);
> +
> + regmap_read(max77686->iodev->regmap, MAX77686_REG_DEVICE_ID, &data);
> +
> + for (i = 0; i < MAX77686_REGULATORS; i++) {
> + if (pdata)
> + init_data[pdata->regulators[i].id] =
> + pdata->regulators[i].initdata;
> +
> + max77686_get_enable_register(regulators[i].id,
> + ®ulators[i].enable_reg, ®ulators[i].enable_mask);
> + max77686_get_voltage_register(regulators[i].id,
> + ®ulators[i].vsel_reg, ®ulators[i].vsel_mask);
> +
> + config.init_data = init_data[i];
> + rdev[i] = regulator_register(®ulators[i], &config);
> +
> + if (IS_ERR(rdev[i])) {
> + ret = PTR_ERR(rdev[i]);
> + dev_err(max77686->dev,
> + "regulator init failed for %d\n", i);
> + rdev[i] = NULL;
> + goto err;
> + }
> + }
> +
> + for (i = 0; i < 8; i++) {
> + if (pdata->buck2_voltage[i] > 0)
> + ret = regulator_map_voltage_linear(
> + rdev[MAX77686_LDOS+1],
> + pdata->buck2_voltage[i],
> + pdata->buck2_voltage[i]
> + + MAX77686_DVS_UVSTEP);
> + /* 1.1V as default for safety */
> + if (pdata->buck2_voltage[i] <= 0 || ret < 0)
> + max77686->buck2_vol[i] = 0x28;
> + else
> + max77686->buck2_vol[i] = ret;
> + regmap_write(max77686->iodev->regmap,
> + MAX77686_REG_BUCK2DVS1 + i, max77686->buck2_vol[i]);
> +
> + if (pdata->buck3_voltage[i] > 0)
> + ret = regulator_map_voltage_linear(
> + rdev[MAX77686_LDOS+1],
> + pdata->buck3_voltage[i],
> + pdata->buck3_voltage[i]
> + + MAX77686_DVS_UVSTEP);
> + /* 1.1V as default for safety */
> + if (pdata->buck3_voltage[i] <= 0 || ret < 0)
> + max77686->buck3_vol[i] = 0x28;
> + else
> + max77686->buck3_vol[i] = ret;
> + regmap_write(max77686->iodev->regmap,
> + MAX77686_REG_BUCK3DVS1 + i, max77686->buck3_vol[i]);
> +
> + if (pdata->buck4_voltage[i] > 0)
> + ret = regulator_map_voltage_linear(
> + rdev[MAX77686_LDOS+1],
> + pdata->buck4_voltage[i],
> + pdata->buck4_voltage[i]
> + + MAX77686_DVS_UVSTEP);
> + /* 1.1V as default for safety */
> + if (pdata->buck4_voltage[i] <= 0 || ret < 0)
> + max77686->buck4_vol[i] = 0x28;
> + else
> + max77686->buck4_vol[i] = ret;
> + regmap_write(max77686->iodev->regmap,
> + MAX77686_REG_BUCK4DVS1 + i, max77686->buck4_vol[i]);
> + }
> +
> + return 0;
> +err:
> + for (i = 0; i < MAX77686_REGULATORS; i++) {
> + if (rdev[i])
> + regulator_unregister(rdev[i]);
> + }
> + return ret;
> +}
> +
> +static int __devexit max77686_pmic_remove(struct platform_device *pdev)
> +{
> + struct max77686_data *max77686 = platform_get_drvdata(pdev);
> + struct regulator_dev **rdev = max77686->rdev;
> + int i;
> +
> + for (i = 0; i < MAX77686_REGULATORS; i++)
> + if (rdev[i])
> + regulator_unregister(rdev[i]);
> +
> + return 0;
> +}
> +
> +static const struct platform_device_id max77686_pmic_id[] = {
> + { "max77686-pmic", 0},
> + { },
> +};
> +MODULE_DEVICE_TABLE(platform, max77686_pmic_id);
> +
> +static struct platform_driver max77686_pmic_driver = {
> + .driver = {
> + .name = "max77686-pmic",
> + .owner = THIS_MODULE,
> + },
> + .probe = max77686_pmic_probe,
> + .remove = __devexit_p(max77686_pmic_remove),
> + .id_table = max77686_pmic_id,
> +};
> +
> +static int __init max77686_pmic_init(void)
> +{
> + return platform_driver_register(&max77686_pmic_driver);
> +}
> +subsys_initcall(max77686_pmic_init);
> +
> +static void __exit max77686_pmic_cleanup(void)
> +{
> + platform_driver_unregister(&max77686_pmic_driver);
> +}
> +module_exit(max77686_pmic_cleanup);
> +
> +MODULE_DESCRIPTION("MAXIM 77686 Regulator Driver");
> +MODULE_AUTHOR("Chiwoong Byun <woong.byun@...sung.com>");
> +MODULE_LICENSE("GPL");
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists