| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4FBB5A13.4060301@kernel.org>
Date: Tue, 22 May 2012 10:19:15 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Johan Hovold <jhovold@...il.com>
CC: Jonathan Cameron <jic23@....ac.uk>, Rob Landley <rob@...dley.net>,
Richard Purdie <rpurdie@...ys.net>,
Samuel Ortiz <sameo@...ux.intel.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Florian Tobias Schandinat <FlorianSchandinat@....de>,
Arnd Bergmann <arnd@...db.de>,
Andrew Morton <akpm@...ux-foundation.org>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-iio@...r.kernel.org
Subject: Re: [PATCH v5] iio: add LM3533 ambient-light-sensor driver
On 5/21/2012 1:18 PM, Johan Hovold wrote:
> Add sub-driver for the ambient-light-sensor interface on National
> Semiconductor / TI LM3533 lighting power chips.
>
> The sensor interface can be used to control the LEDs and backlights of
> the chip through defining five light zones and three sets of
> corresponding output-current values.
>
> The driver provides raw and mean adc readings along with the current
> light zone through sysfs. A threshold event can be generated on zone
> changes. The ALS-control output values can be set per zone for the three
> current output channels.
There are a few bits of documentation I'd rather were in
sysfs-bus-iio but we can move them any time.
I haven't compile tested as no machine availability till this evening.
Please do one last sanity check against staging-next.
Thanks,
>
> Signed-off-by: Johan Hovold<jhovold@...il.com>
Acked-by: Jonathan Cameron <jic23@...nel.org>
> ---
>
> v2:
> - reimplement using iio
> - add sysfs-ABI documentation
> v3
> - use indexed channel
> - fix sysfs-ABI documentation typo and style
> - replace gain attribute with in_illuminance0_calibscale
> - add calibscale to platform data
> - fix adc register definitions
> - replace to_lm3533_dev_attr macro with inline function
> - fix device used for error reporting at irq allocation
> - use iio device for error reporting during setup/enable
> - rebase on staging-next
> - fix header include paths
> - use dev_to_iio_dev
> - add IIO_CHAN_INFO_RAW to info mask
> - use iio_device_{alloc,free}
> v4
> - move to driver/iio/light
> - add events/in_illuminance0_threshY_hysteresis attributes
> - fix device zone-boundary quirkiness
> - clean up attribute handling
> - replace calibscale with device-specific r_select attribute
> v5
> - drop r_select from sysfs ABI
> - fix set_input_mode
> - minor style changes
> - register iio device last at probe
> - use dev_name for iio_dev and irq name
> - add out_currentY channels
>
>
> .../ABI/testing/sysfs-bus-iio-light-lm3533-als | 62 ++
> drivers/iio/Kconfig | 1 +
> drivers/iio/Makefile | 1 +
> drivers/iio/light/Kconfig | 22 +
> drivers/iio/light/Makefile | 5 +
> drivers/iio/light/lm3533-als.c | 932 ++++++++++++++++++++
> 6 files changed, 1023 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als
> create mode 100644 drivers/iio/light/Kconfig
> create mode 100644 drivers/iio/light/Makefile
> create mode 100644 drivers/iio/light/lm3533-als.c
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als b/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als
> new file mode 100644
> index 0000000..694a52c
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als
> @@ -0,0 +1,62 @@
> +What: /sys/.../events/in_illuminance0_thresh_either_en
> +Date: April 2012
> +KernelVersion: 3.5
> +Contact: Johan Hovold<jhovold@...il.com>
> +Description:
> + Event generated when channel passes one of the four thresholds
> + in each direction (rising|falling) and a zone change occurs.
> + The corresponding light zone can be read from
> + in_illuminance0_zone.
> +
> +What: /sys/.../events/in_illuminance0_threshY_hysteresis
> +Date: May 2012
> +KernelVersion: 3.5
> +Contact: Johan Hovold<jhovold@...il.com>
> +Description:
> + Get the hysteresis for thresholds Y, that is,
> +
> + threshY_hysteresis = threshY_raising - threshY_falling
> +
> +What: /sys/.../events/illuminance_threshY_falling_value
> +What: /sys/.../events/illuminance_threshY_raising_value
> +Date: April 2012
> +KernelVersion: 3.5
> +Contact: Johan Hovold<jhovold@...il.com>
> +Description:
> + Specifies the value of threshold that the device is comparing
> + against for the events enabled by
> + in_illuminance0_thresh_either_en (0..255), where Y in 0..3.
> +
> + Note that threshY_falling must be less than or equal to
> + threshY_raising.
> +
> + These thresholds correspond to the eight zone-boundary
> + registers (boundaryY_{low,high}) and defines the five light
> + zones.
> +
> +What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_zone
> +Date: April 2012
> +KernelVersion: 3.5
> +Contact: Johan Hovold<jhovold@...il.com>
> +Description:
> + Get the current light zone (0..4) as defined by the
> + in_illuminance0_threshY_{falling,rising} thresholds.
> +
> +What: /sys/bus/iio/devices/iio:deviceX/out_currentY_raw
> +Date: May 2012
> +KernelVersion: 3.5
> +Contact: Johan Hovold<jhovold@...il.com>
> +Description:
> + Get output current for channel Y (0..255), that is,
> + out_currentY_currentZ_raw, where Z is the current zone.
Should be in core docs. Can fix that later though.
> +
> +What: /sys/bus/iio/devices/iio:deviceX/out_currentY_currentZ_raw
> +Date: May 2012
> +KernelVersion: 3.5
> +Contact: Johan Hovold<jhovold@...il.com>
> +Description:
> + Set the output current for channel out_currentY when in zone
> + Z (0..255), where Y in 0..2 and Z in 0..4.
> +
> + These values correspond to the ALS-mapper target registers for
> + ALS-mapper Y + 1.
Hmm. tempted to move this to core docs too.
> diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
> index 56eecef..cacc74d 100644
> --- a/drivers/iio/Kconfig
> +++ b/drivers/iio/Kconfig
> @@ -50,5 +50,6 @@ config IIO_CONSUMERS_PER_TRIGGER
>
> source "drivers/iio/adc/Kconfig"
> source "drivers/iio/amplifiers/Kconfig"
> +source "drivers/iio/light/Kconfig"
>
> endif # IIO
> diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
> index e425afd..060b674 100644
> --- a/drivers/iio/Makefile
> +++ b/drivers/iio/Makefile
> @@ -11,3 +11,4 @@ obj-$(CONFIG_IIO_KFIFO_BUF) += kfifo_buf.o
>
> obj-y += adc/
> obj-y += amplifiers/
> +obj-y += light/
> diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
> new file mode 100644
> index 0000000..db5618e
> --- /dev/null
> +++ b/drivers/iio/light/Kconfig
> @@ -0,0 +1,22 @@
> +#
> +# Light sensors
> +#
> +menu "Light sensors"
> +
> +config SENSORS_LM3533
> + tristate "LM3533 ambient light sensor"
> + depends on MFD_LM3533
> + help
> + If you say yes here you get support for the ambient light sensor
> + interface on National Semiconductor / TI LM3533 Lighting Power
> + chips.
> +
> + The sensor interface can be used to control the LEDs and backlights
> + of the chip through defining five light zones and three sets of
> + corresponding output-current values.
> +
> + The driver provides raw and mean adc readings along with the current
> + light zone through sysfs. A threshold event can be generated on zone
> + changes. The ALS-control output values can be set per zone for the
> + three current output channels.
> +endmenu
> diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
> new file mode 100644
> index 0000000..c1c23a0
> --- /dev/null
> +++ b/drivers/iio/light/Makefile
> @@ -0,0 +1,5 @@
> +#
> +# Makefile for IIO Light sensors
> +#
> +
> +obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o
> diff --git a/drivers/iio/light/lm3533-als.c b/drivers/iio/light/lm3533-als.c
> new file mode 100644
> index 0000000..c3e7bac
> --- /dev/null
> +++ b/drivers/iio/light/lm3533-als.c
> @@ -0,0 +1,932 @@
> +/*
> + * lm3533-als.c -- LM3533 Ambient Light Sensor driver
> + *
> + * Copyright (C) 2011-2012 Texas Instruments
> + *
> + * Author: Johan Hovold<jhovold@...il.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include<linux/atomic.h>
> +#include<linux/fs.h>
> +#include<linux/interrupt.h>
> +#include<linux/io.h>
> +#include<linux/iio/events.h>
> +#include<linux/iio/iio.h>
> +#include<linux/module.h>
> +#include<linux/mutex.h>
> +#include<linux/mfd/core.h>
> +#include<linux/platform_device.h>
> +#include<linux/slab.h>
> +#include<linux/uaccess.h>
> +
> +#include<linux/mfd/lm3533.h>
> +
> +
> +#define LM3533_ALS_RESISTOR_MIN 1
> +#define LM3533_ALS_RESISTOR_MAX 127
> +#define LM3533_ALS_CHANNEL_CURRENT_MAX 2
> +#define LM3533_ALS_THRESH_MAX 3
> +#define LM3533_ALS_ZONE_MAX 4
> +
> +#define LM3533_REG_ALS_RESISTOR_SELECT 0x30
> +#define LM3533_REG_ALS_CONF 0x31
> +#define LM3533_REG_ALS_ZONE_INFO 0x34
> +#define LM3533_REG_ALS_READ_ADC_RAW 0x37
> +#define LM3533_REG_ALS_READ_ADC_AVERAGE 0x38
> +#define LM3533_REG_ALS_BOUNDARY_BASE 0x50
> +#define LM3533_REG_ALS_TARGET_BASE 0x60
> +
> +#define LM3533_ALS_ENABLE_MASK 0x01
> +#define LM3533_ALS_INPUT_MODE_MASK 0x02
> +#define LM3533_ALS_INT_ENABLE_MASK 0x01
> +
> +#define LM3533_ALS_ZONE_SHIFT 2
> +#define LM3533_ALS_ZONE_MASK 0x1c
> +
> +#define LM3533_ALS_FLAG_INT_ENABLED 1
> +
> +
> +struct lm3533_als {
> + struct lm3533 *lm3533;
> + struct platform_device *pdev;
> +
> + unsigned long flags;
> + int irq;
> +
> + atomic_t zone;
> + struct mutex thresh_mutex;
> +};
> +
> +
> +static int lm3533_als_get_adc(struct iio_dev *indio_dev, bool average,
> + int *adc)
> +{
> + struct lm3533_als *als = iio_priv(indio_dev);
> + u8 reg;
> + u8 val;
> + int ret;
> +
> + if (average)
> + reg = LM3533_REG_ALS_READ_ADC_AVERAGE;
> + else
> + reg = LM3533_REG_ALS_READ_ADC_RAW;
> +
> + ret = lm3533_read(als->lm3533, reg,&val);
> + if (ret) {
> + dev_err(&indio_dev->dev, "failed to read adc\n");
> + return ret;
> + }
> +
> + *adc = val;
> +
> + return 0;
> +}
> +
> +static int _lm3533_als_get_zone(struct iio_dev *indio_dev, u8 *zone)
> +{
> + struct lm3533_als *als = iio_priv(indio_dev);
> + u8 val;
> + int ret;
> +
> + ret = lm3533_read(als->lm3533, LM3533_REG_ALS_ZONE_INFO,&val);
> + if (ret) {
> + dev_err(&indio_dev->dev, "failed to read zone\n");
> + return ret;
> + }
> +
> + val = (val& LM3533_ALS_ZONE_MASK)>> LM3533_ALS_ZONE_SHIFT;
> + *zone = min_t(u8, val, LM3533_ALS_ZONE_MAX);
> +
> + return 0;
> +}
> +
> +static int lm3533_als_get_zone(struct iio_dev *indio_dev, u8 *zone)
> +{
> + struct lm3533_als *als = iio_priv(indio_dev);
> + int ret;
> +
> + if (test_bit(LM3533_ALS_FLAG_INT_ENABLED,&als->flags)) {
> + *zone = atomic_read(&als->zone);
> + } else {
> + ret = _lm3533_als_get_zone(indio_dev, zone);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * channel output channel 0..2
> + * zone zone 0..4
> + */
> +static inline u8 lm3533_als_get_target_reg(unsigned channel, unsigned zone)
> +{
> + return LM3533_REG_ALS_TARGET_BASE + 5 * channel + zone;
> +}
> +
> +static int lm3533_als_get_target(struct iio_dev *indio_dev, unsigned channel,
> + unsigned zone, u8 *val)
> +{
> + struct lm3533_als *als = iio_priv(indio_dev);
> + u8 reg;
> + int ret;
> +
> + if (channel> LM3533_ALS_CHANNEL_CURRENT_MAX)
> + return -EINVAL;
> +
> + if (zone> LM3533_ALS_ZONE_MAX)
> + return -EINVAL;
> +
> + reg = lm3533_als_get_target_reg(channel, zone);
> + ret = lm3533_read(als->lm3533, reg, val);
> + if (ret)
> + dev_err(&indio_dev->dev, "failed to get target current\n");
> +
> + return ret;
> +}
> +
> +static int lm3533_als_set_target(struct iio_dev *indio_dev, unsigned channel,
> + unsigned zone, u8 val)
> +{
> + struct lm3533_als *als = iio_priv(indio_dev);
> + u8 reg;
> + int ret;
> +
> + if (channel> LM3533_ALS_CHANNEL_CURRENT_MAX)
> + return -EINVAL;
> +
> + if (zone> LM3533_ALS_ZONE_MAX)
> + return -EINVAL;
> +
> + reg = lm3533_als_get_target_reg(channel, zone);
> + ret = lm3533_write(als->lm3533, reg, val);
> + if (ret)
> + dev_err(&indio_dev->dev, "failed to set target current\n");
> +
> + return ret;
> +}
> +
> +static int lm3533_als_get_current(struct iio_dev *indio_dev, unsigned channel,
> + int *val)
> +{
> + u8 zone;
> + u8 target;
> + int ret;
> +
> + ret = lm3533_als_get_zone(indio_dev,&zone);
> + if (ret)
> + return ret;
> +
> + ret = lm3533_als_get_target(indio_dev, channel, zone,&target);
> + if (ret)
> + return ret;
> +
> + *val = target;
> +
> + return 0;
> +}
> +
> +static int lm3533_als_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long mask)
> +{
> + int ret;
> +
> + switch (mask) {
> + case 0:
> + switch (chan->type) {
> + case IIO_LIGHT:
> + ret = lm3533_als_get_adc(indio_dev, false, val);
> + break;
> + case IIO_CURRENT:
> + ret = lm3533_als_get_current(indio_dev, chan->channel,
> + val);
> + break;
> + default:
> + return -EINVAL;
> + }
> + break;
> + case IIO_CHAN_INFO_AVERAGE_RAW:
> + ret = lm3533_als_get_adc(indio_dev, true, val);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + if (ret)
> + return ret;
> +
> + return IIO_VAL_INT;
> +}
> +
> +#define CHANNEL_CURRENT(_channel) \
> + { \
> + .type = IIO_CURRENT, \
> + .channel = _channel, \
> + .indexed = true, \
> + .output = true, \
> + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, \
> + }
> +
> +static const struct iio_chan_spec lm3533_als_channels[] = {
> + {
> + .type = IIO_LIGHT,
> + .channel = 0,
> + .indexed = true,
> + .info_mask = (IIO_CHAN_INFO_AVERAGE_RAW_SEPARATE_BIT |
> + IIO_CHAN_INFO_RAW_SEPARATE_BIT),
> + },
> + CHANNEL_CURRENT(0),
> + CHANNEL_CURRENT(1),
> + CHANNEL_CURRENT(2),
> +};
> +
> +static irqreturn_t lm3533_als_isr(int irq, void *dev_id)
> +{
> +
> + struct iio_dev *indio_dev = dev_id;
> + struct lm3533_als *als = iio_priv(indio_dev);
> + u8 zone;
> + int ret;
> +
> + /* Clear interrupt by reading the ALS zone register. */
> + ret = _lm3533_als_get_zone(indio_dev,&zone);
> + if (ret)
> + goto out;
> +
> + atomic_set(&als->zone, zone);
> +
> + iio_push_event(indio_dev,
> + IIO_UNMOD_EVENT_CODE(IIO_LIGHT,
> + 0,
> + IIO_EV_TYPE_THRESH,
> + IIO_EV_DIR_EITHER),
> + iio_get_time_ns());
> +out:
> + return IRQ_HANDLED;
> +}
> +
> +static int lm3533_als_set_int_mode(struct iio_dev *indio_dev, int enable)
> +{
> + struct lm3533_als *als = iio_priv(indio_dev);
> + u8 mask = LM3533_ALS_INT_ENABLE_MASK;
> + u8 val;
> + int ret;
> +
> + if (enable)
> + val = mask;
> + else
> + val = 0;
> +
> + ret = lm3533_update(als->lm3533, LM3533_REG_ALS_ZONE_INFO, val, mask);
> + if (ret) {
> + dev_err(&indio_dev->dev, "failed to set int mode %d\n",
> + enable);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int lm3533_als_get_int_mode(struct iio_dev *indio_dev, int *enable)
> +{
> + struct lm3533_als *als = iio_priv(indio_dev);
> + u8 mask = LM3533_ALS_INT_ENABLE_MASK;
> + u8 val;
> + int ret;
> +
> + ret = lm3533_read(als->lm3533, LM3533_REG_ALS_ZONE_INFO,&val);
> + if (ret) {
> + dev_err(&indio_dev->dev, "failed to get int mode\n");
> + return ret;
> + }
> +
> + *enable = !!(val& mask);
> +
> + return 0;
> +}
> +
> +static inline u8 lm3533_als_get_threshold_reg(unsigned nr, bool raising)
> +{
> + u8 offset = !raising;
> +
> + return LM3533_REG_ALS_BOUNDARY_BASE + 2 * nr + offset;
> +}
> +
> +static int lm3533_als_get_threshold(struct iio_dev *indio_dev, unsigned nr,
> + bool raising, u8 *val)
> +{
> + struct lm3533_als *als = iio_priv(indio_dev);
> + u8 reg;
> + int ret;
> +
> + if (nr> LM3533_ALS_THRESH_MAX)
> + return -EINVAL;
> +
> + reg = lm3533_als_get_threshold_reg(nr, raising);
> + ret = lm3533_read(als->lm3533, reg, val);
> + if (ret)
> + dev_err(&indio_dev->dev, "failed to get threshold\n");
> +
> + return ret;
> +}
> +
> +static int lm3533_als_set_threshold(struct iio_dev *indio_dev, unsigned nr,
> + bool raising, u8 val)
> +{
> + struct lm3533_als *als = iio_priv(indio_dev);
> + u8 val2;
> + u8 reg, reg2;
> + int ret;
> +
> + if (nr> LM3533_ALS_THRESH_MAX)
> + return -EINVAL;
> +
> + reg = lm3533_als_get_threshold_reg(nr, raising);
> + reg2 = lm3533_als_get_threshold_reg(nr, !raising);
> +
> + mutex_lock(&als->thresh_mutex);
> + ret = lm3533_read(als->lm3533, reg2,&val2);
> + if (ret) {
> + dev_err(&indio_dev->dev, "failed to get threshold\n");
> + goto out;
> + }
> + /*
> + * This device does not allow negative hysteresis (in fact, it uses
> + * whichever value is smaller as the lower bound) so we need to make
> + * sure that thresh_falling<= thresh_raising.
> + */
> + if ((raising&& (val< val2)) || (!raising&& (val> val2))) {
> + ret = -EINVAL;
> + goto out;
> + }
> +
> + ret = lm3533_write(als->lm3533, reg, val);
> + if (ret) {
> + dev_err(&indio_dev->dev, "failed to set threshold\n");
> + goto out;
> + }
> +out:
> + mutex_unlock(&als->thresh_mutex);
> +
> + return ret;
> +}
> +
> +static int lm3533_als_get_hysteresis(struct iio_dev *indio_dev, unsigned nr,
> + u8 *val)
> +{
> + struct lm3533_als *als = iio_priv(indio_dev);
> + u8 falling;
> + u8 raising;
> + int ret;
> +
> + if (nr> LM3533_ALS_THRESH_MAX)
> + return -EINVAL;
> +
> + mutex_lock(&als->thresh_mutex);
> + ret = lm3533_als_get_threshold(indio_dev, nr, false,&falling);
> + if (ret)
> + goto out;
> + ret = lm3533_als_get_threshold(indio_dev, nr, true,&raising);
> + if (ret)
> + goto out;
> +
> + *val = raising - falling;
> +out:
> + mutex_unlock(&als->thresh_mutex);
> +
> + return ret;
> +}
> +
> +static int show_thresh_either_en(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> + struct lm3533_als *als = iio_priv(indio_dev);
> + int enable;
> + int ret;
> +
> + if (als->irq) {
> + ret = lm3533_als_get_int_mode(indio_dev,&enable);
> + if (ret)
> + return ret;
> + } else {
> + enable = 0;
> + }
> +
> + return scnprintf(buf, PAGE_SIZE, "%u\n", enable);
> +}
> +
> +static int store_thresh_either_en(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t len)
> +{
> + struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> + struct lm3533_als *als = iio_priv(indio_dev);
> + unsigned long enable;
> + bool int_enabled;
> + u8 zone;
> + int ret;
> +
> + if (!als->irq)
> + return -EBUSY;
> +
> + if (kstrtoul(buf, 0,&enable))
> + return -EINVAL;
> +
> + int_enabled = test_bit(LM3533_ALS_FLAG_INT_ENABLED,&als->flags);
> +
> + if (enable&& !int_enabled) {
> + ret = lm3533_als_get_zone(indio_dev,&zone);
> + if (ret)
> + return ret;
> +
> + atomic_set(&als->zone, zone);
> +
> + set_bit(LM3533_ALS_FLAG_INT_ENABLED,&als->flags);
> + }
> +
> + ret = lm3533_als_set_int_mode(indio_dev, enable);
> + if (ret) {
> + if (!int_enabled)
> + clear_bit(LM3533_ALS_FLAG_INT_ENABLED,&als->flags);
> +
> + return ret;
> + }
> +
> + if (!enable)
> + clear_bit(LM3533_ALS_FLAG_INT_ENABLED,&als->flags);
> +
> + return len;
> +}
> +
> +static ssize_t show_zone(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> + u8 zone;
> + int ret;
> +
> + ret = lm3533_als_get_zone(indio_dev,&zone);
> + if (ret)
> + return ret;
> +
> + return scnprintf(buf, PAGE_SIZE, "%u\n", zone);
> +}
> +
> +enum lm3533_als_attribute_type {
> + LM3533_ATTR_TYPE_HYSTERESIS,
> + LM3533_ATTR_TYPE_TARGET,
> + LM3533_ATTR_TYPE_THRESH_FALLING,
> + LM3533_ATTR_TYPE_THRESH_RAISING,
> +};
> +
> +struct lm3533_als_attribute {
> + struct device_attribute dev_attr;
> + enum lm3533_als_attribute_type type;
> + u8 val1;
> + u8 val2;
> +};
> +
> +static inline struct lm3533_als_attribute *
> +to_lm3533_als_attr(struct device_attribute *attr)
> +{
> + return container_of(attr, struct lm3533_als_attribute, dev_attr);
> +}
> +
> +static ssize_t show_als_attr(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> + struct lm3533_als_attribute *als_attr = to_lm3533_als_attr(attr);
> + u8 val;
> + int ret;
> +
> + switch (als_attr->type) {
> + case LM3533_ATTR_TYPE_HYSTERESIS:
> + ret = lm3533_als_get_hysteresis(indio_dev, als_attr->val1,
> + &val);
> + break;
> + case LM3533_ATTR_TYPE_TARGET:
> + ret = lm3533_als_get_target(indio_dev, als_attr->val1,
> + als_attr->val2,&val);
> + break;
> + case LM3533_ATTR_TYPE_THRESH_FALLING:
> + ret = lm3533_als_get_threshold(indio_dev, als_attr->val1,
> + false,&val);
> + break;
> + case LM3533_ATTR_TYPE_THRESH_RAISING:
> + ret = lm3533_als_get_threshold(indio_dev, als_attr->val1,
> + true,&val);
> + break;
> + default:
> + ret = -ENXIO;
> + }
> +
> + if (ret)
> + return ret;
> +
> + return scnprintf(buf, PAGE_SIZE, "%u\n", val);
> +}
> +
> +static ssize_t store_als_attr(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t len)
> +{
> + struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> + struct lm3533_als_attribute *als_attr = to_lm3533_als_attr(attr);
> + u8 val;
> + int ret;
> +
> + if (kstrtou8(buf, 0,&val))
> + return -EINVAL;
> +
> + switch (als_attr->type) {
> + case LM3533_ATTR_TYPE_TARGET:
> + ret = lm3533_als_set_target(indio_dev, als_attr->val1,
> + als_attr->val2, val);
> + break;
> + case LM3533_ATTR_TYPE_THRESH_FALLING:
> + ret = lm3533_als_set_threshold(indio_dev, als_attr->val1,
> + false, val);
> + break;
> + case LM3533_ATTR_TYPE_THRESH_RAISING:
> + ret = lm3533_als_set_threshold(indio_dev, als_attr->val1,
> + true, val);
> + break;
> + default:
> + ret = -ENXIO;
> + }
> +
> + if (ret)
> + return ret;
> +
> + return len;
> +}
> +
> +#define ALS_ATTR(_name, _mode, _show, _store, _type, _val1, _val2) \
> + { .dev_attr = __ATTR(_name, _mode, _show, _store), \
> + .type = _type, \
> + .val1 = _val1, \
> + .val2 = _val2 }
> +
> +#define LM3533_ALS_ATTR(_name, _mode, _show, _store, _type, _val1, _val2) \
> + struct lm3533_als_attribute lm3533_als_attr_##_name = \
> + ALS_ATTR(_name, _mode, _show, _store, _type, _val1, _val2)
> +
> +#define ALS_TARGET_ATTR_RW(_channel, _zone) \
> + LM3533_ALS_ATTR(out_current##_channel##_current##_zone##_raw, \
> + S_IRUGO | S_IWUSR, \
> + show_als_attr, store_als_attr, \
> + LM3533_ATTR_TYPE_TARGET, _channel, _zone)
> +/*
> + * ALS output current values (ALS mapper targets)
> + *
> + * out_current[0-2]_current[0-4]_raw 0-255
> + */
> +static ALS_TARGET_ATTR_RW(0, 0);
> +static ALS_TARGET_ATTR_RW(0, 1);
> +static ALS_TARGET_ATTR_RW(0, 2);
> +static ALS_TARGET_ATTR_RW(0, 3);
> +static ALS_TARGET_ATTR_RW(0, 4);
> +
> +static ALS_TARGET_ATTR_RW(1, 0);
> +static ALS_TARGET_ATTR_RW(1, 1);
> +static ALS_TARGET_ATTR_RW(1, 2);
> +static ALS_TARGET_ATTR_RW(1, 3);
> +static ALS_TARGET_ATTR_RW(1, 4);
> +
> +static ALS_TARGET_ATTR_RW(2, 0);
> +static ALS_TARGET_ATTR_RW(2, 1);
> +static ALS_TARGET_ATTR_RW(2, 2);
> +static ALS_TARGET_ATTR_RW(2, 3);
> +static ALS_TARGET_ATTR_RW(2, 4);
> +
> +#define ALS_THRESH_FALLING_ATTR_RW(_nr) \
> + LM3533_ALS_ATTR(in_illuminance0_thresh##_nr##_falling_value, \
> + S_IRUGO | S_IWUSR, \
> + show_als_attr, store_als_attr, \
> + LM3533_ATTR_TYPE_THRESH_FALLING, _nr, 0)
> +
> +#define ALS_THRESH_RAISING_ATTR_RW(_nr) \
> + LM3533_ALS_ATTR(in_illuminance0_thresh##_nr##_raising_value, \
> + S_IRUGO | S_IWUSR, \
> + show_als_attr, store_als_attr, \
> + LM3533_ATTR_TYPE_THRESH_RAISING, _nr, 0)
> +/*
> + * ALS Zone thresholds (boundaries)
> + *
> + * in_illuminance0_thresh[0-3]_falling_value 0-255
> + * in_illuminance0_thresh[0-3]_raising_value 0-255
> + */
> +static ALS_THRESH_FALLING_ATTR_RW(0);
> +static ALS_THRESH_FALLING_ATTR_RW(1);
> +static ALS_THRESH_FALLING_ATTR_RW(2);
> +static ALS_THRESH_FALLING_ATTR_RW(3);
> +
> +static ALS_THRESH_RAISING_ATTR_RW(0);
> +static ALS_THRESH_RAISING_ATTR_RW(1);
> +static ALS_THRESH_RAISING_ATTR_RW(2);
> +static ALS_THRESH_RAISING_ATTR_RW(3);
> +
> +#define ALS_HYSTERESIS_ATTR_RO(_nr) \
> + LM3533_ALS_ATTR(in_illuminance0_thresh##_nr##_hysteresis, \
> + S_IRUGO, show_als_attr, NULL, \
> + LM3533_ATTR_TYPE_HYSTERESIS, _nr, 0)
> +/*
> + * ALS Zone threshold hysteresis
> + *
> + * threshY_hysteresis = threshY_raising - threshY_falling
> + *
> + * in_illuminance0_thresh[0-3]_hysteresis 0-255
> + * in_illuminance0_thresh[0-3]_hysteresis 0-255
> + */
> +static ALS_HYSTERESIS_ATTR_RO(0);
> +static ALS_HYSTERESIS_ATTR_RO(1);
> +static ALS_HYSTERESIS_ATTR_RO(2);
> +static ALS_HYSTERESIS_ATTR_RO(3);
> +
> +#define ILLUMINANCE_ATTR_RO(_name) \
> + DEVICE_ATTR(in_illuminance0_##_name, S_IRUGO, show_##_name, NULL)
> +#define ILLUMINANCE_ATTR_RW(_name) \
> + DEVICE_ATTR(in_illuminance0_##_name, S_IRUGO | S_IWUSR , \
> + show_##_name, store_##_name)
> +/*
> + * ALS Zone threshold-event enable
> + *
> + * in_illuminance0_thresh_either_en 0,1
> + */
> +static ILLUMINANCE_ATTR_RW(thresh_either_en);
> +
> +/*
> + * ALS Current Zone
> + *
> + * in_illuminance0_zone 0-4
> + */
> +static ILLUMINANCE_ATTR_RO(zone);
> +
> +static struct attribute *lm3533_als_event_attributes[] = {
> + &dev_attr_in_illuminance0_thresh_either_en.attr,
> + &lm3533_als_attr_in_illuminance0_thresh0_falling_value.dev_attr.attr,
> + &lm3533_als_attr_in_illuminance0_thresh0_hysteresis.dev_attr.attr,
> + &lm3533_als_attr_in_illuminance0_thresh0_raising_value.dev_attr.attr,
> + &lm3533_als_attr_in_illuminance0_thresh1_falling_value.dev_attr.attr,
> + &lm3533_als_attr_in_illuminance0_thresh1_hysteresis.dev_attr.attr,
> + &lm3533_als_attr_in_illuminance0_thresh1_raising_value.dev_attr.attr,
> + &lm3533_als_attr_in_illuminance0_thresh2_falling_value.dev_attr.attr,
> + &lm3533_als_attr_in_illuminance0_thresh2_hysteresis.dev_attr.attr,
> + &lm3533_als_attr_in_illuminance0_thresh2_raising_value.dev_attr.attr,
> + &lm3533_als_attr_in_illuminance0_thresh3_falling_value.dev_attr.attr,
> + &lm3533_als_attr_in_illuminance0_thresh3_hysteresis.dev_attr.attr,
> + &lm3533_als_attr_in_illuminance0_thresh3_raising_value.dev_attr.attr,
> + NULL
> +};
> +
> +static struct attribute_group lm3533_als_event_attribute_group = {
> + .attrs = lm3533_als_event_attributes
> +};
> +
> +static struct attribute *lm3533_als_attributes[] = {
> + &dev_attr_in_illuminance0_zone.attr,
> + &lm3533_als_attr_out_current0_current0_raw.dev_attr.attr,
> + &lm3533_als_attr_out_current0_current1_raw.dev_attr.attr,
> + &lm3533_als_attr_out_current0_current2_raw.dev_attr.attr,
> + &lm3533_als_attr_out_current0_current3_raw.dev_attr.attr,
> + &lm3533_als_attr_out_current0_current4_raw.dev_attr.attr,
> + &lm3533_als_attr_out_current1_current0_raw.dev_attr.attr,
> + &lm3533_als_attr_out_current1_current1_raw.dev_attr.attr,
> + &lm3533_als_attr_out_current1_current2_raw.dev_attr.attr,
> + &lm3533_als_attr_out_current1_current3_raw.dev_attr.attr,
> + &lm3533_als_attr_out_current1_current4_raw.dev_attr.attr,
> + &lm3533_als_attr_out_current2_current0_raw.dev_attr.attr,
> + &lm3533_als_attr_out_current2_current1_raw.dev_attr.attr,
> + &lm3533_als_attr_out_current2_current2_raw.dev_attr.attr,
> + &lm3533_als_attr_out_current2_current3_raw.dev_attr.attr,
> + &lm3533_als_attr_out_current2_current4_raw.dev_attr.attr,
> + NULL
> +};
> +
> +static struct attribute_group lm3533_als_attribute_group = {
> + .attrs = lm3533_als_attributes
> +};
> +
> +static int __devinit lm3533_als_set_input_mode(struct lm3533_als *als,
> + bool pwm_mode)
> +{
> + u8 mask = LM3533_ALS_INPUT_MODE_MASK;
> + u8 val;
> + int ret;
> +
> + if (pwm_mode)
> + val = mask; /* pwm input */
> + else
> + val = 0; /* analog input */
> +
> + ret = lm3533_update(als->lm3533, LM3533_REG_ALS_CONF, val, mask);
> + if (ret) {
> + dev_err(&als->pdev->dev, "failed to set input mode %d\n",
> + pwm_mode);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int __devinit lm3533_als_set_resistor(struct lm3533_als *als, u8 val)
> +{
> + int ret;
> +
> + if (val< LM3533_ALS_RESISTOR_MIN || val> LM3533_ALS_RESISTOR_MAX)
> + return -EINVAL;
> +
> + ret = lm3533_write(als->lm3533, LM3533_REG_ALS_RESISTOR_SELECT, val);
> + if (ret) {
> + dev_err(&als->pdev->dev, "failed to set resistor\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int __devinit lm3533_als_setup(struct lm3533_als *als,
> + struct lm3533_als_platform_data *pdata)
> +{
> + int ret;
> +
> + ret = lm3533_als_set_input_mode(als, pdata->pwm_mode);
> + if (ret)
> + return ret;
> +
> + /* ALS input is always high impedance in PWM-mode. */
> + if (!pdata->pwm_mode) {
> + ret = lm3533_als_set_resistor(als, pdata->r_select);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int __devinit lm3533_als_setup_irq(struct lm3533_als *als, void *dev)
> +{
> + u8 mask = LM3533_ALS_INT_ENABLE_MASK;
> + int ret;
> +
> + /* Make sure interrupts are disabled. */
> + ret = lm3533_update(als->lm3533, LM3533_REG_ALS_ZONE_INFO, 0, mask);
> + if (ret) {
> + dev_err(&als->pdev->dev, "failed to disable interrupts\n");
> + return ret;
> + }
> +
> + ret = request_threaded_irq(als->irq, NULL, lm3533_als_isr,
> + IRQF_TRIGGER_LOW | IRQF_ONESHOT,
> + dev_name(&als->pdev->dev), dev);
> + if (ret) {
> + dev_err(&als->pdev->dev, "failed to request irq %d\n",
> + als->irq);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int __devinit lm3533_als_enable(struct lm3533_als *als)
> +{
> + u8 mask = LM3533_ALS_ENABLE_MASK;
> + int ret;
> +
> + ret = lm3533_update(als->lm3533, LM3533_REG_ALS_CONF, mask, mask);
> + if (ret)
> + dev_err(&als->pdev->dev, "failed to enable ALS\n");
> +
> + return ret;
> +}
> +
> +static int lm3533_als_disable(struct lm3533_als *als)
> +{
> + u8 mask = LM3533_ALS_ENABLE_MASK;
> + int ret;
> +
> + ret = lm3533_update(als->lm3533, LM3533_REG_ALS_CONF, 0, mask);
> + if (ret)
> + dev_err(&als->pdev->dev, "failed to disable ALS\n");
> +
> + return ret;
> +}
> +
> +static const struct iio_info lm3533_als_info = {
> + .attrs =&lm3533_als_attribute_group,
> + .event_attrs =&lm3533_als_event_attribute_group,
> + .driver_module = THIS_MODULE,
> + .read_raw =&lm3533_als_read_raw,
> +};
> +
> +static int __devinit lm3533_als_probe(struct platform_device *pdev)
> +{
> + struct lm3533 *lm3533;
> + struct lm3533_als_platform_data *pdata;
> + struct lm3533_als *als;
> + struct iio_dev *indio_dev;
> + int ret;
> +
> + lm3533 = dev_get_drvdata(pdev->dev.parent);
> + if (!lm3533)
> + return -EINVAL;
> +
> + pdata = pdev->dev.platform_data;
> + if (!pdata) {
> + dev_err(&pdev->dev, "no platform data\n");
> + return -EINVAL;
> + }
> +
> + indio_dev = iio_device_alloc(sizeof(*als));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + indio_dev->info =&lm3533_als_info;
> + indio_dev->channels = lm3533_als_channels;
> + indio_dev->num_channels = ARRAY_SIZE(lm3533_als_channels);
> + indio_dev->name = dev_name(&pdev->dev);
> + indio_dev->dev.parent = pdev->dev.parent;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> +
> + als = iio_priv(indio_dev);
> + als->lm3533 = lm3533;
> + als->pdev = pdev;
> + als->irq = lm3533->irq;
> + atomic_set(&als->zone, 0);
> + mutex_init(&als->thresh_mutex);
> +
> + platform_set_drvdata(pdev, indio_dev);
> +
> + if (als->irq) {
> + ret = lm3533_als_setup_irq(als, indio_dev);
> + if (ret)
> + goto err_free_dev;
> + }
> +
> + ret = lm3533_als_setup(als, pdata);
> + if (ret)
> + goto err_free_irq;
> +
> + ret = lm3533_als_enable(als);
> + if (ret)
> + goto err_free_irq;
> +
> + ret = iio_device_register(indio_dev);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to register ALS\n");
> + goto err_disable;
> + }
> +
> + return 0;
> +
> +err_disable:
> + lm3533_als_disable(als);
> +err_free_irq:
> + if (als->irq)
> + free_irq(als->irq, indio_dev);
> +err_free_dev:
> + iio_device_free(indio_dev);
> +
> + return ret;
> +}
> +
> +static int __devexit lm3533_als_remove(struct platform_device *pdev)
> +{
> + struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> + struct lm3533_als *als = iio_priv(indio_dev);
> +
> + lm3533_als_set_int_mode(indio_dev, false);
> + iio_device_unregister(indio_dev);
> + lm3533_als_disable(als);
> + if (als->irq)
> + free_irq(als->irq, indio_dev);
> + iio_device_free(indio_dev);
> +
> + return 0;
> +}
> +
> +static struct platform_driver lm3533_als_driver = {
> + .driver = {
> + .name = "lm3533-als",
> + .owner = THIS_MODULE,
> + },
> + .probe = lm3533_als_probe,
> + .remove = __devexit_p(lm3533_als_remove),
> +};
> +module_platform_driver(lm3533_als_driver);
> +
> +MODULE_AUTHOR("Johan Hovold<jhovold@...il.com>");
> +MODULE_DESCRIPTION("LM3533 Ambient Light Sensor driver");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:lm3533-als");
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists