[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <b166cb0fce2a67b24da5808604553b4196258f45.1337959750.git.rubini@gnudd.com>
Date: Fri, 25 May 2012 17:48:57 +0200
From: Alessandro Rubini <rubini@...dd.com>
To: linux-kernel@...r.kernel.org
Cc: Giancarlo Asnaghi <giancarlo.asnaghi@...com>,
Alan Cox <alan@...ux.intel.com>,
Russell King <linux@....linux.org.uk>, x86@...nel.org,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Arnd Bergmann <arnd@...db.de>,
linux-arm-kernel@...ts.infradead.org, linux-serial@...r.kernel.org,
linux-arch@...r.kernel.org
Subject: [PATCH 6/6] serial: add amba-pl011-pci
This is a simple PCI driver that registers an amba device
in its probe function. It successfully drives the 4 serial
ports of the sta2x11 I/O Hub.
Signed-off-by: Alessandro Rubini <rubini@...dd.com>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@...com>
Cc: Russell King <linux@....linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/tty/serial/Kconfig | 10 +++-
drivers/tty/serial/Makefile | 1 +
drivers/tty/serial/amba-pl011-pci.c | 101 +++++++++++++++++++++++++++++++++++
3 files changed, 111 insertions(+), 1 deletions(-)
create mode 100644 drivers/tty/serial/amba-pl011-pci.c
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 070b442..e5e5ef6 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -39,14 +39,22 @@ config SERIAL_AMBA_PL010_CONSOLE
config SERIAL_AMBA_PL011
tristate "ARM AMBA PL011 serial port support"
depends on ARM_AMBA
+ default y if STA2X11
select SERIAL_CORE
help
This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have
an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M
- here.
+ here. This is also needed to use the sta2x11 I/O Hub for Atom.
If unsure, say N.
+config SERIAL_AMBA_PL011_PCI
+ tristate "ARM AMBA PL011 behind a PCI-to-AMBA bridge"
+ depends on SERIAL_AMBA_PL011 && PCI
+ default y if STA2X11
+ help
+ Say Y if your AMBA bus is behind a PCI bridge (e.g.: sta2x11)
+
config SERIAL_AMBA_PL011_CONSOLE
bool "Support for console on AMBA serial port"
depends on SERIAL_AMBA_PL011=y
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 7257c5d..b8cd14b 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_SERIAL_8250) += 8250/
obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
+obj-$(CONFIG_SERIAL_AMBA_PL011_PCI) += amba-pl011-pci.o
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
obj-$(CONFIG_SERIAL_PXA) += pxa.o
obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
diff --git a/drivers/tty/serial/amba-pl011-pci.c b/drivers/tty/serial/amba-pl011-pci.c
new file mode 100644
index 0000000..b3aa0f1
--- /dev/null
+++ b/drivers/tty/serial/amba-pl011-pci.c
@@ -0,0 +1,101 @@
+/*
+ * Support for AMBA pl011 uart behind a PCI bridge
+ * Copyright 2012 ST Microelectronics (Alessandro Rubini)
+ * GNU GPL version 2.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/amba/bus.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/sizes.h>
+#include <linux/amba/serial.h>
+
+/* This is a template, copied every time a new pci device appears */
+static AMBA_APB_DEVICE(pl011_pci_template, "pl011-pci", 0,
+ 0 /* base */, {0} /* irqs */, NULL /* data */);
+
+static int __devinit pl011_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct amba_device *adev;
+ struct amba_pl011_data *data;
+ int ret;
+
+ /* Simply build an amba device and register it */
+ adev = kmemdup(&pl011_pci_template_device,
+ sizeof(pl011_pci_template_device), GFP_KERNEL);
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!adev || !data) {
+ kfree(adev);
+ kfree(data);
+ return -ENOMEM;
+ }
+ pci_set_master(pdev);
+ pci_enable_msi(pdev);
+ adev->irq[0] = pdev->irq;
+ if (pdev->vendor == PCI_VENDOR_ID_STMICRO) {
+ /* Under sta2x11, DMA is there but limited to 512M */
+ adev->dma_mask = SZ_512M - 1;
+ adev->dev.coherent_dma_mask = SZ_512M - 1;
+ }
+
+ /* Link the pci to amba and the amba to pci */
+ adev->dev.platform_data = data;
+ //data->pdev = pdev;
+ pci_set_drvdata(pdev, adev);
+
+ /* Create a new resource, to be registered as child of the PCI one */
+ adev->res.flags = pdev->resource[0].flags;
+ adev->res.start = pdev->resource[0].start;
+ adev->res.end = adev->res.start + SZ_4K - 1;
+
+ /* change name */
+ adev->dev.init_name = kasprintf(GFP_ATOMIC, "pl011-pci-%02x:%04x",
+ pdev->bus->number, pdev->devfn);
+
+ printk(KERN_INFO "%s %i\n", __func__, __LINE__);
+ if ((ret = amba_device_register(adev, &pdev->resource[0])) < 0) {
+ kfree(adev);
+ return ret;
+ }
+ return 0;
+};
+
+static void __devexit pl011_pci_remove(struct pci_dev *pdev)
+{
+ struct amba_device *adev = pci_get_drvdata(pdev);
+ amba_device_unregister(adev);
+ kfree(adev->dev.platform_data);
+ kfree(adev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(pl011_pci_table) = {
+ {PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_UART_HWFC)},
+ {PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_UART_NO_HWFC)},
+ {0,}
+};
+
+static struct pci_driver pl011_pci_driver = {
+ .name = "pl011-pci",
+ .id_table = pl011_pci_table,
+ .probe = pl011_pci_probe,
+ .remove = __devexit_p(pl011_pci_remove),
+};
+
+static int __init pl011_pci_init(void)
+{
+ return pci_register_driver(&pl011_pci_driver);
+}
+
+static void __exit pl011_pci_exit(void)
+{
+ pci_unregister_driver(&pl011_pci_driver);
+}
+
+module_init(pl011_pci_init);
+module_exit(pl011_pci_exit);
+
--
1.7.7.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists