| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20120601211637.20328.108.stgit@amt.stowe>
Date: Fri, 01 Jun 2012 15:16:37 -0600
From: Myron Stowe <myron.stowe@...hat.com>
To: bhelgaas@...gle.com
Cc: linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
xudong.hao@...ux.intel.com, ddutile@...hat.com, yu.zhao@...el.com
Subject: [PATCH 3/4] PCI: Add pci_pcie_cap2() check for PCIe feature
capabilities >= v2
This patch resolves potential issues when accessing PCI Express
capability structures. The makeup of Express' capability structure
varies substantially between v1 and v2:
PCI Express 1.0 and 1.1 base neither requires the endpoint to
implement the entire PCIe capability structure nor specifies
default values of registers that are not implemented by the
device. Its capability version is 1.
PCIe 1.1 Capability Structure Expansion ECN, PCIe 2.0, 2.1, and
3.0 added additional registers to the structure and require all
registers to be either implemented or hardwired to 0. Their PCIe
capability version is 2.
Due to the differences in the capability structures, code dealing with
capability features must be careful not to access the additional
registers introduced with v2 unless the device is specifically known to
be a v2 capable device. Otherwise, attempts to access non-existant
registers will occur. This is a subtle issue that is hard to track down
when it occurs (and it has - see commit 864d296cf94).
To try and help mitigate such occurrances, this patch introduces
pci_pcie_cap2() which is similar to pci_pcie_cap() but also checks
that the PCIe capability version is >= 2. pci_pcie_cap2() should be
used for qualifying PCIe capability features introduced after v1.
Suggested by Don Dutile.
Signed-off-by: Myron Stowe <myron.stowe@...hat.com>
---
drivers/pci/pci.c | 65 +++++++++++++++++++++++++++++++++++-----------
include/linux/pci_regs.h | 7 +++++
2 files changed, 57 insertions(+), 15 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index ff0beb0..26933ff 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -279,6 +279,38 @@ int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap)
}
/**
+ * pci_pcie_cap2 - query for devices' PCI_CAP_ID_EXP v2 capability structure
+ * @dev: PCI device to check
+ *
+ * Like pci_pcie_cap() but also checks that the PCIe capability version is
+ * >= 2. Note that v1 capability structures could be sparse in that not
+ * all register fields were required. v2 requires the entire structure to
+ * be present size wise, while still allowing for non-implemented registers
+ * to exist but they must be hardwired to 0.
+ *
+ * Due to the differences in the versions of capability structures, one
+ * must be careful not to try and access non-existant registers that may
+ * exist in early versions - v1 - of Express devices.
+ *
+ * Returns the offset of the PCIe capability structure as long as the
+ * capability version is >= 2; otherwise 0 is returned.
+ */
+static int pci_pcie_cap2(struct pci_dev *dev)
+{
+ u16 flags;
+ int pos;
+
+ pos = pci_pcie_cap(dev);
+ if (pos) {
+ pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags);
+ if ((flags & PCI_EXP_FLAGS_VERS) < 2)
+ pos = 0;
+ }
+
+ return pos;
+}
+
+/**
* pci_find_ext_capability - Find an extended capability
* @dev: PCI device to query
* @cap: capability code
@@ -1984,7 +2016,7 @@ void pci_enable_ari(struct pci_dev *dev)
{
int pos;
u32 cap;
- u16 flags, ctrl;
+ u16 ctrl;
struct pci_dev *bridge;
if (pcie_ari_disabled || !pci_is_pcie(dev) || dev->devfn)
@@ -1998,13 +2030,9 @@ void pci_enable_ari(struct pci_dev *dev)
if (!bridge)
return;
- pos = pci_pcie_cap(bridge);
- if (!pos)
- return;
-
/* ARI is a PCIe v2 feature */
- pci_read_config_word(bridge, pos + PCI_EXP_FLAGS, &flags);
- if ((flags & PCI_EXP_FLAGS_VERS) < 2)
+ pos = pci_pcie_cap2(bridge);
+ if (!pos)
return;
pci_read_config_dword(bridge, pos + PCI_EXP_DEVCAP2, &cap);
@@ -2019,7 +2047,7 @@ void pci_enable_ari(struct pci_dev *dev)
}
/**
- * pci_enable_ido - enable ID-based ordering on a device
+ * pci_enable_ido - enable ID-based Ordering on a device
* @dev: the PCI device
* @type: which types of IDO to enable
*
@@ -2032,7 +2060,8 @@ void pci_enable_ido(struct pci_dev *dev, unsigned long type)
int pos;
u16 ctrl;
- pos = pci_pcie_cap(dev);
+ /* ID-based Ordering is a PCIe v2 feature */
+ pos = pci_pcie_cap2(dev);
if (!pos)
return;
@@ -2055,7 +2084,8 @@ void pci_disable_ido(struct pci_dev *dev, unsigned long type)
int pos;
u16 ctrl;
- pos = pci_pcie_cap(dev);
+ /* ID-based Ordering is a PCIe v2 feature */
+ pos = pci_pcie_cap2(dev);
if (!pos)
return;
@@ -2094,7 +2124,8 @@ int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type type)
u16 ctrl;
int ret;
- pos = pci_pcie_cap(dev);
+ /* OBFF is a PCIe v2 feature */
+ pos = pci_pcie_cap2(dev);
if (!pos)
return -ENOTSUPP;
@@ -2144,7 +2175,8 @@ void pci_disable_obff(struct pci_dev *dev)
int pos;
u16 ctrl;
- pos = pci_pcie_cap(dev);
+ /* OBFF is a PCIe v2 feature */
+ pos = pci_pcie_cap2(dev);
if (!pos)
return;
@@ -2166,7 +2198,8 @@ static bool pci_ltr_supported(struct pci_dev *dev)
int pos;
u32 cap;
- pos = pci_pcie_cap(dev);
+ /* LTR is a PCIe v2 feature */
+ pos = pci_pcie_cap2(dev);
if (!pos)
return false;
@@ -2194,7 +2227,8 @@ int pci_enable_ltr(struct pci_dev *dev)
if (!pci_ltr_supported(dev))
return -ENOTSUPP;
- pos = pci_pcie_cap(dev);
+ /* LTR is a PCIe v2 feature */
+ pos = pci_pcie_cap2(dev);
if (!pos)
return -ENOTSUPP;
@@ -2229,7 +2263,8 @@ void pci_disable_ltr(struct pci_dev *dev)
if (!pci_ltr_supported(dev))
return;
- pos = pci_pcie_cap(dev);
+ /* LTR is a PCIe v2 feature */
+ pos = pci_pcie_cap2(dev);
if (!pos)
return;
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index 4b608f5..bc1b54d 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -507,6 +507,13 @@
#define PCI_EXP_RTSTA 32 /* Root Status */
#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */
#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */
+/*
+ * Note that the following PCI Express 'Capability Structure' registers
+ * were introduced with 'Capability Version' 0x2 (v2). These registers
+ * do not exist, and thus should not be attempted to be accesses, by
+ * PCI Express v1 devices (see pci_pcie_cap2() for use in qualifying
+ * PCI Express v2 capability related features).
+ */
#define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */
#define PCI_EXP_DEVCAP2_ARI 0x20 /* Alternative Routing-ID */
#define PCI_EXP_DEVCAP2_LTR 0x800 /* Latency tolerance reporting */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists