[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1338727044-23960-3-git-send-email-broonie@opensource.wolfsonmicro.com>
Date: Sun, 3 Jun 2012 13:37:24 +0100
From: Mark Brown <broonie@...nsource.wolfsonmicro.com>
To: Samuel Ortiz <sameo@...ux.intel.com>
Cc: linux-kernel@...r.kernel.org, patches@...nsource.wolfsonmicro.com,
Mark Brown <broonie@...nsource.wolfsonmicro.com>
Subject: [PATCH 3/3] mfd: wm8350: Remove custom cache implementation
Since none of the users now reference the cache directly we can happily
remove the custom cache code and rely on the regmap cache.
For simplicity we don't bother with the register defaults tables but
instead read the defaults from the device - regmap is capable of doing
this, unlike our old cache infrastructure. This saves a lot of code and
allows us to cache the device revision information too.
Signed-off-by: Mark Brown <broonie@...nsource.wolfsonmicro.com>
---
drivers/mfd/wm8350-core.c | 325 +---
drivers/mfd/wm8350-regmap.c | 3166 +--------------------------------------
include/linux/mfd/wm8350/core.h | 19 -
3 files changed, 18 insertions(+), 3492 deletions(-)
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index fadcbbe..7c1ae24 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -60,181 +60,32 @@
/*
* WM8350 Device IO
*/
-static DEFINE_MUTEX(io_mutex);
static DEFINE_MUTEX(reg_lock_mutex);
-/* Perform a physical read from the device.
- */
-static int wm8350_phys_read(struct wm8350 *wm8350, u8 reg, int num_regs,
- u16 *dest)
-{
- int i, ret;
- int bytes = num_regs * 2;
-
- dev_dbg(wm8350->dev, "volatile read\n");
- ret = regmap_raw_read(wm8350->regmap, reg, dest, bytes);
-
- for (i = reg; i < reg + num_regs; i++) {
- /* Cache is CPU endian */
- dest[i - reg] = be16_to_cpu(dest[i - reg]);
-
- /* Mask out non-readable bits */
- dest[i - reg] &= wm8350_reg_io_map[i].readable;
- }
-
- dump(num_regs, dest);
-
- return ret;
-}
-
-static int wm8350_read(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *dest)
-{
- int i;
- int end = reg + num_regs;
- int ret = 0;
- int bytes = num_regs * 2;
-
- if ((reg + num_regs - 1) > WM8350_MAX_REGISTER) {
- dev_err(wm8350->dev, "invalid reg %x\n",
- reg + num_regs - 1);
- return -EINVAL;
- }
-
- dev_dbg(wm8350->dev,
- "%s R%d(0x%2.2x) %d regs\n", __func__, reg, reg, num_regs);
-
-#if WM8350_BUS_DEBUG
- /* we can _safely_ read any register, but warn if read not supported */
- for (i = reg; i < end; i++) {
- if (!wm8350_reg_io_map[i].readable)
- dev_warn(wm8350->dev,
- "reg R%d is not readable\n", i);
- }
-#endif
-
- /* if any volatile registers are required, then read back all */
- for (i = reg; i < end; i++)
- if (wm8350_reg_io_map[i].vol)
- return wm8350_phys_read(wm8350, reg, num_regs, dest);
-
- /* no volatiles, then cache is good */
- dev_dbg(wm8350->dev, "cache read\n");
- memcpy(dest, &wm8350->reg_cache[reg], bytes);
- dump(num_regs, dest);
- return ret;
-}
-
-static inline int is_reg_locked(struct wm8350 *wm8350, u8 reg)
-{
- if (reg == WM8350_SECURITY ||
- wm8350->reg_cache[WM8350_SECURITY] == WM8350_UNLOCK_KEY)
- return 0;
-
- if ((reg >= WM8350_GPIO_FUNCTION_SELECT_1 &&
- reg <= WM8350_GPIO_FUNCTION_SELECT_4) ||
- (reg >= WM8350_BATTERY_CHARGER_CONTROL_1 &&
- reg <= WM8350_BATTERY_CHARGER_CONTROL_3))
- return 1;
- return 0;
-}
-
-static int wm8350_write(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *src)
-{
- int i;
- int end = reg + num_regs;
- int bytes = num_regs * 2;
-
- if ((reg + num_regs - 1) > WM8350_MAX_REGISTER) {
- dev_err(wm8350->dev, "invalid reg %x\n",
- reg + num_regs - 1);
- return -EINVAL;
- }
-
- /* it's generally not a good idea to write to RO or locked registers */
- for (i = reg; i < end; i++) {
- if (!wm8350_reg_io_map[i].writable) {
- dev_err(wm8350->dev,
- "attempted write to read only reg R%d\n", i);
- return -EINVAL;
- }
-
- if (is_reg_locked(wm8350, i)) {
- dev_err(wm8350->dev,
- "attempted write to locked reg R%d\n", i);
- return -EINVAL;
- }
-
- src[i - reg] &= wm8350_reg_io_map[i].writable;
-
- wm8350->reg_cache[i] =
- (wm8350->reg_cache[i] & ~wm8350_reg_io_map[i].writable)
- | src[i - reg];
-
- src[i - reg] = cpu_to_be16(src[i - reg]);
- }
-
- /* Actually write it out */
- return regmap_raw_write(wm8350->regmap, reg, src, bytes);
-}
-
/*
* Safe read, modify, write methods
*/
int wm8350_clear_bits(struct wm8350 *wm8350, u16 reg, u16 mask)
{
- u16 data;
- int err;
-
- mutex_lock(&io_mutex);
- err = wm8350_read(wm8350, reg, 1, &data);
- if (err) {
- dev_err(wm8350->dev, "read from reg R%d failed\n", reg);
- goto out;
- }
-
- data &= ~mask;
- err = wm8350_write(wm8350, reg, 1, &data);
- if (err)
- dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
-out:
- mutex_unlock(&io_mutex);
- return err;
+ return regmap_update_bits(wm8350->regmap, reg, mask, 0);
}
EXPORT_SYMBOL_GPL(wm8350_clear_bits);
int wm8350_set_bits(struct wm8350 *wm8350, u16 reg, u16 mask)
{
- u16 data;
- int err;
-
- mutex_lock(&io_mutex);
- err = wm8350_read(wm8350, reg, 1, &data);
- if (err) {
- dev_err(wm8350->dev, "read from reg R%d failed\n", reg);
- goto out;
- }
-
- data |= mask;
- err = wm8350_write(wm8350, reg, 1, &data);
- if (err)
- dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
-out:
- mutex_unlock(&io_mutex);
- return err;
+ return regmap_update_bits(wm8350->regmap, reg, mask, mask);
}
EXPORT_SYMBOL_GPL(wm8350_set_bits);
u16 wm8350_reg_read(struct wm8350 *wm8350, int reg)
{
- u16 data;
+ unsigned int data;
int err;
- mutex_lock(&io_mutex);
- err = wm8350_read(wm8350, reg, 1, &data);
+ err = regmap_read(wm8350->regmap, reg, &data);
if (err)
dev_err(wm8350->dev, "read from reg R%d failed\n", reg);
- mutex_unlock(&io_mutex);
return data;
}
EXPORT_SYMBOL_GPL(wm8350_reg_read);
@@ -242,13 +93,11 @@ EXPORT_SYMBOL_GPL(wm8350_reg_read);
int wm8350_reg_write(struct wm8350 *wm8350, int reg, u16 val)
{
int ret;
- u16 data = val;
- mutex_lock(&io_mutex);
- ret = wm8350_write(wm8350, reg, 1, &data);
+ ret = regmap_write(wm8350->regmap, reg, val);
+
if (ret)
dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
- mutex_unlock(&io_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(wm8350_reg_write);
@@ -258,12 +107,11 @@ int wm8350_block_read(struct wm8350 *wm8350, int start_reg, int regs,
{
int err = 0;
- mutex_lock(&io_mutex);
- err = wm8350_read(wm8350, start_reg, regs, dest);
+ err = regmap_bulk_read(wm8350->regmap, start_reg, dest, regs);
if (err)
dev_err(wm8350->dev, "block read starting from R%d failed\n",
start_reg);
- mutex_unlock(&io_mutex);
+
return err;
}
EXPORT_SYMBOL_GPL(wm8350_block_read);
@@ -273,12 +121,11 @@ int wm8350_block_write(struct wm8350 *wm8350, int start_reg, int regs,
{
int ret = 0;
- mutex_lock(&io_mutex);
- ret = wm8350_write(wm8350, start_reg, regs, src);
+ ret = regmap_bulk_write(wm8350->regmap, start_reg, src, regs);
if (ret)
dev_err(wm8350->dev, "block write starting at R%d failed\n",
start_reg);
- mutex_unlock(&io_mutex);
+
return ret;
}
EXPORT_SYMBOL_GPL(wm8350_block_write);
@@ -402,146 +249,6 @@ static irqreturn_t wm8350_auxadc_irq(int irq, void *irq_data)
}
/*
- * Cache is always host endian.
- */
-static int wm8350_create_cache(struct wm8350 *wm8350, int type, int mode)
-{
- int i, ret = 0;
- u16 value;
- const u16 *reg_map;
-
- switch (type) {
- case 0:
- switch (mode) {
-#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0
- case 0:
- reg_map = wm8350_mode0_defaults;
- break;
-#endif
-#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_1
- case 1:
- reg_map = wm8350_mode1_defaults;
- break;
-#endif
-#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_2
- case 2:
- reg_map = wm8350_mode2_defaults;
- break;
-#endif
-#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_3
- case 3:
- reg_map = wm8350_mode3_defaults;
- break;
-#endif
- default:
- dev_err(wm8350->dev,
- "WM8350 configuration mode %d not supported\n",
- mode);
- return -EINVAL;
- }
- break;
-
- case 1:
- switch (mode) {
-#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_0
- case 0:
- reg_map = wm8351_mode0_defaults;
- break;
-#endif
-#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_1
- case 1:
- reg_map = wm8351_mode1_defaults;
- break;
-#endif
-#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_2
- case 2:
- reg_map = wm8351_mode2_defaults;
- break;
-#endif
-#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_3
- case 3:
- reg_map = wm8351_mode3_defaults;
- break;
-#endif
- default:
- dev_err(wm8350->dev,
- "WM8351 configuration mode %d not supported\n",
- mode);
- return -EINVAL;
- }
- break;
-
- case 2:
- switch (mode) {
-#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_0
- case 0:
- reg_map = wm8352_mode0_defaults;
- break;
-#endif
-#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_1
- case 1:
- reg_map = wm8352_mode1_defaults;
- break;
-#endif
-#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_2
- case 2:
- reg_map = wm8352_mode2_defaults;
- break;
-#endif
-#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_3
- case 3:
- reg_map = wm8352_mode3_defaults;
- break;
-#endif
- default:
- dev_err(wm8350->dev,
- "WM8352 configuration mode %d not supported\n",
- mode);
- return -EINVAL;
- }
- break;
-
- default:
- dev_err(wm8350->dev,
- "WM835x configuration mode %d not supported\n",
- mode);
- return -EINVAL;
- }
-
- wm8350->reg_cache =
- kmalloc(sizeof(u16) * (WM8350_MAX_REGISTER + 1), GFP_KERNEL);
- if (wm8350->reg_cache == NULL)
- return -ENOMEM;
-
- /* Read the initial cache state back from the device - this is
- * a PMIC so the device many not be in a virgin state and we
- * can't rely on the silicon values.
- */
- ret = regmap_raw_read(wm8350->regmap, 0, wm8350->reg_cache,
- sizeof(u16) * (WM8350_MAX_REGISTER + 1));
- if (ret < 0) {
- dev_err(wm8350->dev,
- "failed to read initial cache values\n");
- goto out;
- }
-
- /* Mask out uncacheable/unreadable bits and the audio. */
- for (i = 0; i < WM8350_MAX_REGISTER; i++) {
- if (wm8350_reg_io_map[i].readable &&
- (i < WM8350_CLOCK_CONTROL_1 || i > WM8350_AIF_TEST)) {
- value = be16_to_cpu(wm8350->reg_cache[i]);
- value &= wm8350_reg_io_map[i].readable;
- wm8350->reg_cache[i] = value;
- } else
- wm8350->reg_cache[i] = reg_map[i];
- }
-
-out:
- kfree(wm8350->reg_cache);
- return ret;
-}
-
-/*
* Register a client device. This is non-fatal since there is no need to
* fail the entire device init due to a single platform device failing.
*/
@@ -688,18 +395,12 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
goto err;
}
- ret = wm8350_create_cache(wm8350, mask_rev, mode);
- if (ret < 0) {
- dev_err(wm8350->dev, "Failed to create register cache\n");
- return ret;
- }
-
mutex_init(&wm8350->auxadc_mutex);
init_completion(&wm8350->auxadc_done);
ret = wm8350_irq_init(wm8350, irq, pdata);
if (ret < 0)
- goto err_free;
+ goto err;
if (wm8350->irq_base) {
ret = request_threaded_irq(wm8350->irq_base +
@@ -737,8 +438,6 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
err_irq:
wm8350_irq_exit(wm8350);
-err_free:
- kfree(wm8350->reg_cache);
err:
return ret;
}
@@ -765,8 +464,6 @@ void wm8350_device_exit(struct wm8350 *wm8350)
free_irq(wm8350->irq_base + WM8350_IRQ_AUXADC_DATARDY, wm8350);
wm8350_irq_exit(wm8350);
-
- kfree(wm8350->reg_cache);
}
EXPORT_SYMBOL_GPL(wm8350_device_exit);
diff --git a/drivers/mfd/wm8350-regmap.c b/drivers/mfd/wm8350-regmap.c
index 7974cad..9efc647 100644
--- a/drivers/mfd/wm8350-regmap.c
+++ b/drivers/mfd/wm8350-regmap.c
@@ -14,3170 +14,18 @@
#include <linux/mfd/wm8350/core.h>
-#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0
-
-#undef WM8350_HAVE_CONFIG_MODE
-#define WM8350_HAVE_CONFIG_MODE
-
-const u16 wm8350_mode0_defaults[] = {
- 0x17FF, /* R0 - Reset/ID */
- 0x1000, /* R1 - ID */
- 0x0000, /* R2 */
- 0x1002, /* R3 - System Control 1 */
- 0x0004, /* R4 - System Control 2 */
- 0x0000, /* R5 - System Hibernate */
- 0x8A00, /* R6 - Interface Control */
- 0x0000, /* R7 */
- 0x8000, /* R8 - Power mgmt (1) */
- 0x0000, /* R9 - Power mgmt (2) */
- 0x0000, /* R10 - Power mgmt (3) */
- 0x2000, /* R11 - Power mgmt (4) */
- 0x0E00, /* R12 - Power mgmt (5) */
- 0x0000, /* R13 - Power mgmt (6) */
- 0x0000, /* R14 - Power mgmt (7) */
- 0x0000, /* R15 */
- 0x0000, /* R16 - RTC Seconds/Minutes */
- 0x0100, /* R17 - RTC Hours/Day */
- 0x0101, /* R18 - RTC Date/Month */
- 0x1400, /* R19 - RTC Year */
- 0x0000, /* R20 - Alarm Seconds/Minutes */
- 0x0000, /* R21 - Alarm Hours/Day */
- 0x0000, /* R22 - Alarm Date/Month */
- 0x0320, /* R23 - RTC Time Control */
- 0x0000, /* R24 - System Interrupts */
- 0x0000, /* R25 - Interrupt Status 1 */
- 0x0000, /* R26 - Interrupt Status 2 */
- 0x0000, /* R27 - Power Up Interrupt Status */
- 0x0000, /* R28 - Under Voltage Interrupt status */
- 0x0000, /* R29 - Over Current Interrupt status */
- 0x0000, /* R30 - GPIO Interrupt Status */
- 0x0000, /* R31 - Comparator Interrupt Status */
- 0x3FFF, /* R32 - System Interrupts Mask */
- 0x0000, /* R33 - Interrupt Status 1 Mask */
- 0x0000, /* R34 - Interrupt Status 2 Mask */
- 0x0000, /* R35 - Power Up Interrupt Status Mask */
- 0x0000, /* R36 - Under Voltage Interrupt status Mask */
- 0x0000, /* R37 - Over Current Interrupt status Mask */
- 0x0000, /* R38 - GPIO Interrupt Status Mask */
- 0x0000, /* R39 - Comparator Interrupt Status Mask */
- 0x0040, /* R40 - Clock Control 1 */
- 0x0000, /* R41 - Clock Control 2 */
- 0x3B00, /* R42 - FLL Control 1 */
- 0x7086, /* R43 - FLL Control 2 */
- 0xC226, /* R44 - FLL Control 3 */
- 0x0000, /* R45 - FLL Control 4 */
- 0x0000, /* R46 */
- 0x0000, /* R47 */
- 0x0000, /* R48 - DAC Control */
- 0x0000, /* R49 */
- 0x00C0, /* R50 - DAC Digital Volume L */
- 0x00C0, /* R51 - DAC Digital Volume R */
- 0x0000, /* R52 */
- 0x0040, /* R53 - DAC LR Rate */
- 0x0000, /* R54 - DAC Clock Control */
- 0x0000, /* R55 */
- 0x0000, /* R56 */
- 0x0000, /* R57 */
- 0x4000, /* R58 - DAC Mute */
- 0x0000, /* R59 - DAC Mute Volume */
- 0x0000, /* R60 - DAC Side */
- 0x0000, /* R61 */
- 0x0000, /* R62 */
- 0x0000, /* R63 */
- 0x8000, /* R64 - ADC Control */
- 0x0000, /* R65 */
- 0x00C0, /* R66 - ADC Digital Volume L */
- 0x00C0, /* R67 - ADC Digital Volume R */
- 0x0000, /* R68 - ADC Divider */
- 0x0000, /* R69 */
- 0x0040, /* R70 - ADC LR Rate */
- 0x0000, /* R71 */
- 0x0303, /* R72 - Input Control */
- 0x0000, /* R73 - IN3 Input Control */
- 0x0000, /* R74 - Mic Bias Control */
- 0x0000, /* R75 */
- 0x0000, /* R76 - Output Control */
- 0x0000, /* R77 - Jack Detect */
- 0x0000, /* R78 - Anti Pop Control */
- 0x0000, /* R79 */
- 0x0040, /* R80 - Left Input Volume */
- 0x0040, /* R81 - Right Input Volume */
- 0x0000, /* R82 */
- 0x0000, /* R83 */
- 0x0000, /* R84 */
- 0x0000, /* R85 */
- 0x0000, /* R86 */
- 0x0000, /* R87 */
- 0x0800, /* R88 - Left Mixer Control */
- 0x1000, /* R89 - Right Mixer Control */
- 0x0000, /* R90 */
- 0x0000, /* R91 */
- 0x0000, /* R92 - OUT3 Mixer Control */
- 0x0000, /* R93 - OUT4 Mixer Control */
- 0x0000, /* R94 */
- 0x0000, /* R95 */
- 0x0000, /* R96 - Output Left Mixer Volume */
- 0x0000, /* R97 - Output Right Mixer Volume */
- 0x0000, /* R98 - Input Mixer Volume L */
- 0x0000, /* R99 - Input Mixer Volume R */
- 0x0000, /* R100 - Input Mixer Volume */
- 0x0000, /* R101 */
- 0x0000, /* R102 */
- 0x0000, /* R103 */
- 0x00E4, /* R104 - LOUT1 Volume */
- 0x00E4, /* R105 - ROUT1 Volume */
- 0x00E4, /* R106 - LOUT2 Volume */
- 0x02E4, /* R107 - ROUT2 Volume */
- 0x0000, /* R108 */
- 0x0000, /* R109 */
- 0x0000, /* R110 */
- 0x0000, /* R111 - BEEP Volume */
- 0x0A00, /* R112 - AI Formating */
- 0x0000, /* R113 - ADC DAC COMP */
- 0x0020, /* R114 - AI ADC Control */
- 0x0020, /* R115 - AI DAC Control */
- 0x0000, /* R116 - AIF Test */
- 0x0000, /* R117 */
- 0x0000, /* R118 */
- 0x0000, /* R119 */
- 0x0000, /* R120 */
- 0x0000, /* R121 */
- 0x0000, /* R122 */
- 0x0000, /* R123 */
- 0x0000, /* R124 */
- 0x0000, /* R125 */
- 0x0000, /* R126 */
- 0x0000, /* R127 */
- 0x1FFF, /* R128 - GPIO Debounce */
- 0x0000, /* R129 - GPIO Pin pull up Control */
- 0x03FC, /* R130 - GPIO Pull down Control */
- 0x0000, /* R131 - GPIO Interrupt Mode */
- 0x0000, /* R132 */
- 0x0000, /* R133 - GPIO Control */
- 0x0FFC, /* R134 - GPIO Configuration (i/o) */
- 0x0FFC, /* R135 - GPIO Pin Polarity / Type */
- 0x0000, /* R136 */
- 0x0000, /* R137 */
- 0x0000, /* R138 */
- 0x0000, /* R139 */
- 0x0013, /* R140 - GPIO Function Select 1 */
- 0x0000, /* R141 - GPIO Function Select 2 */
- 0x0000, /* R142 - GPIO Function Select 3 */
- 0x0003, /* R143 - GPIO Function Select 4 */
- 0x0000, /* R144 - Digitiser Control (1) */
- 0x0002, /* R145 - Digitiser Control (2) */
- 0x0000, /* R146 */
- 0x0000, /* R147 */
- 0x0000, /* R148 */
- 0x0000, /* R149 */
- 0x0000, /* R150 */
- 0x0000, /* R151 */
- 0x7000, /* R152 - AUX1 Readback */
- 0x7000, /* R153 - AUX2 Readback */
- 0x7000, /* R154 - AUX3 Readback */
- 0x7000, /* R155 - AUX4 Readback */
- 0x0000, /* R156 - USB Voltage Readback */
- 0x0000, /* R157 - LINE Voltage Readback */
- 0x0000, /* R158 - BATT Voltage Readback */
- 0x0000, /* R159 - Chip Temp Readback */
- 0x0000, /* R160 */
- 0x0000, /* R161 */
- 0x0000, /* R162 */
- 0x0000, /* R163 - Generic Comparator Control */
- 0x0000, /* R164 - Generic comparator 1 */
- 0x0000, /* R165 - Generic comparator 2 */
- 0x0000, /* R166 - Generic comparator 3 */
- 0x0000, /* R167 - Generic comparator 4 */
- 0xA00F, /* R168 - Battery Charger Control 1 */
- 0x0B06, /* R169 - Battery Charger Control 2 */
- 0x0000, /* R170 - Battery Charger Control 3 */
- 0x0000, /* R171 */
- 0x0000, /* R172 - Current Sink Driver A */
- 0x0000, /* R173 - CSA Flash control */
- 0x0000, /* R174 - Current Sink Driver B */
- 0x0000, /* R175 - CSB Flash control */
- 0x0000, /* R176 - DCDC/LDO requested */
- 0x002D, /* R177 - DCDC Active options */
- 0x0000, /* R178 - DCDC Sleep options */
- 0x0025, /* R179 - Power-check comparator */
- 0x000E, /* R180 - DCDC1 Control */
- 0x0000, /* R181 - DCDC1 Timeouts */
- 0x1006, /* R182 - DCDC1 Low Power */
- 0x0018, /* R183 - DCDC2 Control */
- 0x0000, /* R184 - DCDC2 Timeouts */
- 0x0000, /* R185 */
- 0x0000, /* R186 - DCDC3 Control */
- 0x0000, /* R187 - DCDC3 Timeouts */
- 0x0006, /* R188 - DCDC3 Low Power */
- 0x0000, /* R189 - DCDC4 Control */
- 0x0000, /* R190 - DCDC4 Timeouts */
- 0x0006, /* R191 - DCDC4 Low Power */
- 0x0008, /* R192 - DCDC5 Control */
- 0x0000, /* R193 - DCDC5 Timeouts */
- 0x0000, /* R194 */
- 0x0000, /* R195 - DCDC6 Control */
- 0x0000, /* R196 - DCDC6 Timeouts */
- 0x0006, /* R197 - DCDC6 Low Power */
- 0x0000, /* R198 */
- 0x0003, /* R199 - Limit Switch Control */
- 0x001C, /* R200 - LDO1 Control */
- 0x0000, /* R201 - LDO1 Timeouts */
- 0x001C, /* R202 - LDO1 Low Power */
- 0x001B, /* R203 - LDO2 Control */
- 0x0000, /* R204 - LDO2 Timeouts */
- 0x001C, /* R205 - LDO2 Low Power */
- 0x001B, /* R206 - LDO3 Control */
- 0x0000, /* R207 - LDO3 Timeouts */
- 0x001C, /* R208 - LDO3 Low Power */
- 0x001B, /* R209 - LDO4 Control */
- 0x0000, /* R210 - LDO4 Timeouts */
- 0x001C, /* R211 - LDO4 Low Power */
- 0x0000, /* R212 */
- 0x0000, /* R213 */
- 0x0000, /* R214 */
- 0x0000, /* R215 - VCC_FAULT Masks */
- 0x001F, /* R216 - Main Bandgap Control */
- 0x0000, /* R217 - OSC Control */
- 0x9000, /* R218 - RTC Tick Control */
- 0x0000, /* R219 */
- 0x4000, /* R220 - RAM BIST 1 */
- 0x0000, /* R221 */
- 0x0000, /* R222 */
- 0x0000, /* R223 */
- 0x0000, /* R224 */
- 0x0000, /* R225 - DCDC/LDO status */
- 0x0000, /* R226 */
- 0x0000, /* R227 */
- 0x0000, /* R228 */
- 0x0000, /* R229 */
- 0xE000, /* R230 - GPIO Pin Status */
- 0x0000, /* R231 */
- 0x0000, /* R232 */
- 0x0000, /* R233 */
- 0x0000, /* R234 */
- 0x0000, /* R235 */
- 0x0000, /* R236 */
- 0x0000, /* R237 */
- 0x0000, /* R238 */
- 0x0000, /* R239 */
- 0x0000, /* R240 */
- 0x0000, /* R241 */
- 0x0000, /* R242 */
- 0x0000, /* R243 */
- 0x0000, /* R244 */
- 0x0000, /* R245 */
- 0x0000, /* R246 */
- 0x0000, /* R247 */
- 0x0000, /* R248 */
- 0x0000, /* R249 */
- 0x0000, /* R250 */
- 0x0000, /* R251 */
- 0x0000, /* R252 */
- 0x0000, /* R253 */
- 0x0000, /* R254 */
- 0x0000, /* R255 */
-};
-#endif
-
-#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_1
-
-#undef WM8350_HAVE_CONFIG_MODE
-#define WM8350_HAVE_CONFIG_MODE
-
-const u16 wm8350_mode1_defaults[] = {
- 0x17FF, /* R0 - Reset/ID */
- 0x1000, /* R1 - ID */
- 0x0000, /* R2 */
- 0x1002, /* R3 - System Control 1 */
- 0x0014, /* R4 - System Control 2 */
- 0x0000, /* R5 - System Hibernate */
- 0x8A00, /* R6 - Interface Control */
- 0x0000, /* R7 */
- 0x8000, /* R8 - Power mgmt (1) */
- 0x0000, /* R9 - Power mgmt (2) */
- 0x0000, /* R10 - Power mgmt (3) */
- 0x2000, /* R11 - Power mgmt (4) */
- 0x0E00, /* R12 - Power mgmt (5) */
- 0x0000, /* R13 - Power mgmt (6) */
- 0x0000, /* R14 - Power mgmt (7) */
- 0x0000, /* R15 */
- 0x0000, /* R16 - RTC Seconds/Minutes */
- 0x0100, /* R17 - RTC Hours/Day */
- 0x0101, /* R18 - RTC Date/Month */
- 0x1400, /* R19 - RTC Year */
- 0x0000, /* R20 - Alarm Seconds/Minutes */
- 0x0000, /* R21 - Alarm Hours/Day */
- 0x0000, /* R22 - Alarm Date/Month */
- 0x0320, /* R23 - RTC Time Control */
- 0x0000, /* R24 - System Interrupts */
- 0x0000, /* R25 - Interrupt Status 1 */
- 0x0000, /* R26 - Interrupt Status 2 */
- 0x0000, /* R27 - Power Up Interrupt Status */
- 0x0000, /* R28 - Under Voltage Interrupt status */
- 0x0000, /* R29 - Over Current Interrupt status */
- 0x0000, /* R30 - GPIO Interrupt Status */
- 0x0000, /* R31 - Comparator Interrupt Status */
- 0x3FFF, /* R32 - System Interrupts Mask */
- 0x0000, /* R33 - Interrupt Status 1 Mask */
- 0x0000, /* R34 - Interrupt Status 2 Mask */
- 0x0000, /* R35 - Power Up Interrupt Status Mask */
- 0x0000, /* R36 - Under Voltage Interrupt status Mask */
- 0x0000, /* R37 - Over Current Interrupt status Mask */
- 0x0000, /* R38 - GPIO Interrupt Status Mask */
- 0x0000, /* R39 - Comparator Interrupt Status Mask */
- 0x0040, /* R40 - Clock Control 1 */
- 0x0000, /* R41 - Clock Control 2 */
- 0x3B00, /* R42 - FLL Control 1 */
- 0x7086, /* R43 - FLL Control 2 */
- 0xC226, /* R44 - FLL Control 3 */
- 0x0000, /* R45 - FLL Control 4 */
- 0x0000, /* R46 */
- 0x0000, /* R47 */
- 0x0000, /* R48 - DAC Control */
- 0x0000, /* R49 */
- 0x00C0, /* R50 - DAC Digital Volume L */
- 0x00C0, /* R51 - DAC Digital Volume R */
- 0x0000, /* R52 */
- 0x0040, /* R53 - DAC LR Rate */
- 0x0000, /* R54 - DAC Clock Control */
- 0x0000, /* R55 */
- 0x0000, /* R56 */
- 0x0000, /* R57 */
- 0x4000, /* R58 - DAC Mute */
- 0x0000, /* R59 - DAC Mute Volume */
- 0x0000, /* R60 - DAC Side */
- 0x0000, /* R61 */
- 0x0000, /* R62 */
- 0x0000, /* R63 */
- 0x8000, /* R64 - ADC Control */
- 0x0000, /* R65 */
- 0x00C0, /* R66 - ADC Digital Volume L */
- 0x00C0, /* R67 - ADC Digital Volume R */
- 0x0000, /* R68 - ADC Divider */
- 0x0000, /* R69 */
- 0x0040, /* R70 - ADC LR Rate */
- 0x0000, /* R71 */
- 0x0303, /* R72 - Input Control */
- 0x0000, /* R73 - IN3 Input Control */
- 0x0000, /* R74 - Mic Bias Control */
- 0x0000, /* R75 */
- 0x0000, /* R76 - Output Control */
- 0x0000, /* R77 - Jack Detect */
- 0x0000, /* R78 - Anti Pop Control */
- 0x0000, /* R79 */
- 0x0040, /* R80 - Left Input Volume */
- 0x0040, /* R81 - Right Input Volume */
- 0x0000, /* R82 */
- 0x0000, /* R83 */
- 0x0000, /* R84 */
- 0x0000, /* R85 */
- 0x0000, /* R86 */
- 0x0000, /* R87 */
- 0x0800, /* R88 - Left Mixer Control */
- 0x1000, /* R89 - Right Mixer Control */
- 0x0000, /* R90 */
- 0x0000, /* R91 */
- 0x0000, /* R92 - OUT3 Mixer Control */
- 0x0000, /* R93 - OUT4 Mixer Control */
- 0x0000, /* R94 */
- 0x0000, /* R95 */
- 0x0000, /* R96 - Output Left Mixer Volume */
- 0x0000, /* R97 - Output Right Mixer Volume */
- 0x0000, /* R98 - Input Mixer Volume L */
- 0x0000, /* R99 - Input Mixer Volume R */
- 0x0000, /* R100 - Input Mixer Volume */
- 0x0000, /* R101 */
- 0x0000, /* R102 */
- 0x0000, /* R103 */
- 0x00E4, /* R104 - LOUT1 Volume */
- 0x00E4, /* R105 - ROUT1 Volume */
- 0x00E4, /* R106 - LOUT2 Volume */
- 0x02E4, /* R107 - ROUT2 Volume */
- 0x0000, /* R108 */
- 0x0000, /* R109 */
- 0x0000, /* R110 */
- 0x0000, /* R111 - BEEP Volume */
- 0x0A00, /* R112 - AI Formating */
- 0x0000, /* R113 - ADC DAC COMP */
- 0x0020, /* R114 - AI ADC Control */
- 0x0020, /* R115 - AI DAC Control */
- 0x0000, /* R116 - AIF Test */
- 0x0000, /* R117 */
- 0x0000, /* R118 */
- 0x0000, /* R119 */
- 0x0000, /* R120 */
- 0x0000, /* R121 */
- 0x0000, /* R122 */
- 0x0000, /* R123 */
- 0x0000, /* R124 */
- 0x0000, /* R125 */
- 0x0000, /* R126 */
- 0x0000, /* R127 */
- 0x1FFF, /* R128 - GPIO Debounce */
- 0x0000, /* R129 - GPIO Pin pull up Control */
- 0x03FC, /* R130 - GPIO Pull down Control */
- 0x0000, /* R131 - GPIO Interrupt Mode */
- 0x0000, /* R132 */
- 0x0000, /* R133 - GPIO Control */
- 0x00FB, /* R134 - GPIO Configuration (i/o) */
- 0x04FE, /* R135 - GPIO Pin Polarity / Type */
- 0x0000, /* R136 */
- 0x0000, /* R137 */
- 0x0000, /* R138 */
- 0x0000, /* R139 */
- 0x0312, /* R140 - GPIO Function Select 1 */
- 0x1003, /* R141 - GPIO Function Select 2 */
- 0x1331, /* R142 - GPIO Function Select 3 */
- 0x0003, /* R143 - GPIO Function Select 4 */
- 0x0000, /* R144 - Digitiser Control (1) */
- 0x0002, /* R145 - Digitiser Control (2) */
- 0x0000, /* R146 */
- 0x0000, /* R147 */
- 0x0000, /* R148 */
- 0x0000, /* R149 */
- 0x0000, /* R150 */
- 0x0000, /* R151 */
- 0x7000, /* R152 - AUX1 Readback */
- 0x7000, /* R153 - AUX2 Readback */
- 0x7000, /* R154 - AUX3 Readback */
- 0x7000, /* R155 - AUX4 Readback */
- 0x0000, /* R156 - USB Voltage Readback */
- 0x0000, /* R157 - LINE Voltage Readback */
- 0x0000, /* R158 - BATT Voltage Readback */
- 0x0000, /* R159 - Chip Temp Readback */
- 0x0000, /* R160 */
- 0x0000, /* R161 */
- 0x0000, /* R162 */
- 0x0000, /* R163 - Generic Comparator Control */
- 0x0000, /* R164 - Generic comparator 1 */
- 0x0000, /* R165 - Generic comparator 2 */
- 0x0000, /* R166 - Generic comparator 3 */
- 0x0000, /* R167 - Generic comparator 4 */
- 0xA00F, /* R168 - Battery Charger Control 1 */
- 0x0B06, /* R169 - Battery Charger Control 2 */
- 0x0000, /* R170 - Battery Charger Control 3 */
- 0x0000, /* R171 */
- 0x0000, /* R172 - Current Sink Driver A */
- 0x0000, /* R173 - CSA Flash control */
- 0x0000, /* R174 - Current Sink Driver B */
- 0x0000, /* R175 - CSB Flash control */
- 0x0000, /* R176 - DCDC/LDO requested */
- 0x002D, /* R177 - DCDC Active options */
- 0x0000, /* R178 - DCDC Sleep options */
- 0x0025, /* R179 - Power-check comparator */
- 0x0062, /* R180 - DCDC1 Control */
- 0x0400, /* R181 - DCDC1 Timeouts */
- 0x1006, /* R182 - DCDC1 Low Power */
- 0x0018, /* R183 - DCDC2 Control */
- 0x0000, /* R184 - DCDC2 Timeouts */
- 0x0000, /* R185 */
- 0x0026, /* R186 - DCDC3 Control */
- 0x0400, /* R187 - DCDC3 Timeouts */
- 0x0006, /* R188 - DCDC3 Low Power */
- 0x0062, /* R189 - DCDC4 Control */
- 0x0400, /* R190 - DCDC4 Timeouts */
- 0x0006, /* R191 - DCDC4 Low Power */
- 0x0008, /* R192 - DCDC5 Control */
- 0x0000, /* R193 - DCDC5 Timeouts */
- 0x0000, /* R194 */
- 0x0026, /* R195 - DCDC6 Control */
- 0x0800, /* R196 - DCDC6 Timeouts */
- 0x0006, /* R197 - DCDC6 Low Power */
- 0x0000, /* R198 */
- 0x0003, /* R199 - Limit Switch Control */
- 0x0006, /* R200 - LDO1 Control */
- 0x0400, /* R201 - LDO1 Timeouts */
- 0x001C, /* R202 - LDO1 Low Power */
- 0x0006, /* R203 - LDO2 Control */
- 0x0400, /* R204 - LDO2 Timeouts */
- 0x001C, /* R205 - LDO2 Low Power */
- 0x001B, /* R206 - LDO3 Control */
- 0x0000, /* R207 - LDO3 Timeouts */
- 0x001C, /* R208 - LDO3 Low Power */
- 0x001B, /* R209 - LDO4 Control */
- 0x0000, /* R210 - LDO4 Timeouts */
- 0x001C, /* R211 - LDO4 Low Power */
- 0x0000, /* R212 */
- 0x0000, /* R213 */
- 0x0000, /* R214 */
- 0x0000, /* R215 - VCC_FAULT Masks */
- 0x001F, /* R216 - Main Bandgap Control */
- 0x0000, /* R217 - OSC Control */
- 0x9000, /* R218 - RTC Tick Control */
- 0x0000, /* R219 */
- 0x4000, /* R220 - RAM BIST 1 */
- 0x0000, /* R221 */
- 0x0000, /* R222 */
- 0x0000, /* R223 */
- 0x0000, /* R224 */
- 0x0000, /* R225 - DCDC/LDO status */
- 0x0000, /* R226 */
- 0x0000, /* R227 */
- 0x0000, /* R228 */
- 0x0000, /* R229 */
- 0xE000, /* R230 - GPIO Pin Status */
- 0x0000, /* R231 */
- 0x0000, /* R232 */
- 0x0000, /* R233 */
- 0x0000, /* R234 */
- 0x0000, /* R235 */
- 0x0000, /* R236 */
- 0x0000, /* R237 */
- 0x0000, /* R238 */
- 0x0000, /* R239 */
- 0x0000, /* R240 */
- 0x0000, /* R241 */
- 0x0000, /* R242 */
- 0x0000, /* R243 */
- 0x0000, /* R244 */
- 0x0000, /* R245 */
- 0x0000, /* R246 */
- 0x0000, /* R247 */
- 0x0000, /* R248 */
- 0x0000, /* R249 */
- 0x0000, /* R250 */
- 0x0000, /* R251 */
- 0x0000, /* R252 */
- 0x0000, /* R253 */
- 0x0000, /* R254 */
- 0x0000, /* R255 */
-};
-#endif
-
-#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_2
-
-#undef WM8350_HAVE_CONFIG_MODE
-#define WM8350_HAVE_CONFIG_MODE
-
-const u16 wm8350_mode2_defaults[] = {
- 0x17FF, /* R0 - Reset/ID */
- 0x1000, /* R1 - ID */
- 0x0000, /* R2 */
- 0x1002, /* R3 - System Control 1 */
- 0x0014, /* R4 - System Control 2 */
- 0x0000, /* R5 - System Hibernate */
- 0x8A00, /* R6 - Interface Control */
- 0x0000, /* R7 */
- 0x8000, /* R8 - Power mgmt (1) */
- 0x0000, /* R9 - Power mgmt (2) */
- 0x0000, /* R10 - Power mgmt (3) */
- 0x2000, /* R11 - Power mgmt (4) */
- 0x0E00, /* R12 - Power mgmt (5) */
- 0x0000, /* R13 - Power mgmt (6) */
- 0x0000, /* R14 - Power mgmt (7) */
- 0x0000, /* R15 */
- 0x0000, /* R16 - RTC Seconds/Minutes */
- 0x0100, /* R17 - RTC Hours/Day */
- 0x0101, /* R18 - RTC Date/Month */
- 0x1400, /* R19 - RTC Year */
- 0x0000, /* R20 - Alarm Seconds/Minutes */
- 0x0000, /* R21 - Alarm Hours/Day */
- 0x0000, /* R22 - Alarm Date/Month */
- 0x0320, /* R23 - RTC Time Control */
- 0x0000, /* R24 - System Interrupts */
- 0x0000, /* R25 - Interrupt Status 1 */
- 0x0000, /* R26 - Interrupt Status 2 */
- 0x0000, /* R27 - Power Up Interrupt Status */
- 0x0000, /* R28 - Under Voltage Interrupt status */
- 0x0000, /* R29 - Over Current Interrupt status */
- 0x0000, /* R30 - GPIO Interrupt Status */
- 0x0000, /* R31 - Comparator Interrupt Status */
- 0x3FFF, /* R32 - System Interrupts Mask */
- 0x0000, /* R33 - Interrupt Status 1 Mask */
- 0x0000, /* R34 - Interrupt Status 2 Mask */
- 0x0000, /* R35 - Power Up Interrupt Status Mask */
- 0x0000, /* R36 - Under Voltage Interrupt status Mask */
- 0x0000, /* R37 - Over Current Interrupt status Mask */
- 0x0000, /* R38 - GPIO Interrupt Status Mask */
- 0x0000, /* R39 - Comparator Interrupt Status Mask */
- 0x0040, /* R40 - Clock Control 1 */
- 0x0000, /* R41 - Clock Control 2 */
- 0x3B00, /* R42 - FLL Control 1 */
- 0x7086, /* R43 - FLL Control 2 */
- 0xC226, /* R44 - FLL Control 3 */
- 0x0000, /* R45 - FLL Control 4 */
- 0x0000, /* R46 */
- 0x0000, /* R47 */
- 0x0000, /* R48 - DAC Control */
- 0x0000, /* R49 */
- 0x00C0, /* R50 - DAC Digital Volume L */
- 0x00C0, /* R51 - DAC Digital Volume R */
- 0x0000, /* R52 */
- 0x0040, /* R53 - DAC LR Rate */
- 0x0000, /* R54 - DAC Clock Control */
- 0x0000, /* R55 */
- 0x0000, /* R56 */
- 0x0000, /* R57 */
- 0x4000, /* R58 - DAC Mute */
- 0x0000, /* R59 - DAC Mute Volume */
- 0x0000, /* R60 - DAC Side */
- 0x0000, /* R61 */
- 0x0000, /* R62 */
- 0x0000, /* R63 */
- 0x8000, /* R64 - ADC Control */
- 0x0000, /* R65 */
- 0x00C0, /* R66 - ADC Digital Volume L */
- 0x00C0, /* R67 - ADC Digital Volume R */
- 0x0000, /* R68 - ADC Divider */
- 0x0000, /* R69 */
- 0x0040, /* R70 - ADC LR Rate */
- 0x0000, /* R71 */
- 0x0303, /* R72 - Input Control */
- 0x0000, /* R73 - IN3 Input Control */
- 0x0000, /* R74 - Mic Bias Control */
- 0x0000, /* R75 */
- 0x0000, /* R76 - Output Control */
- 0x0000, /* R77 - Jack Detect */
- 0x0000, /* R78 - Anti Pop Control */
- 0x0000, /* R79 */
- 0x0040, /* R80 - Left Input Volume */
- 0x0040, /* R81 - Right Input Volume */
- 0x0000, /* R82 */
- 0x0000, /* R83 */
- 0x0000, /* R84 */
- 0x0000, /* R85 */
- 0x0000, /* R86 */
- 0x0000, /* R87 */
- 0x0800, /* R88 - Left Mixer Control */
- 0x1000, /* R89 - Right Mixer Control */
- 0x0000, /* R90 */
- 0x0000, /* R91 */
- 0x0000, /* R92 - OUT3 Mixer Control */
- 0x0000, /* R93 - OUT4 Mixer Control */
- 0x0000, /* R94 */
- 0x0000, /* R95 */
- 0x0000, /* R96 - Output Left Mixer Volume */
- 0x0000, /* R97 - Output Right Mixer Volume */
- 0x0000, /* R98 - Input Mixer Volume L */
- 0x0000, /* R99 - Input Mixer Volume R */
- 0x0000, /* R100 - Input Mixer Volume */
- 0x0000, /* R101 */
- 0x0000, /* R102 */
- 0x0000, /* R103 */
- 0x00E4, /* R104 - LOUT1 Volume */
- 0x00E4, /* R105 - ROUT1 Volume */
- 0x00E4, /* R106 - LOUT2 Volume */
- 0x02E4, /* R107 - ROUT2 Volume */
- 0x0000, /* R108 */
- 0x0000, /* R109 */
- 0x0000, /* R110 */
- 0x0000, /* R111 - BEEP Volume */
- 0x0A00, /* R112 - AI Formating */
- 0x0000, /* R113 - ADC DAC COMP */
- 0x0020, /* R114 - AI ADC Control */
- 0x0020, /* R115 - AI DAC Control */
- 0x0000, /* R116 - AIF Test */
- 0x0000, /* R117 */
- 0x0000, /* R118 */
- 0x0000, /* R119 */
- 0x0000, /* R120 */
- 0x0000, /* R121 */
- 0x0000, /* R122 */
- 0x0000, /* R123 */
- 0x0000, /* R124 */
- 0x0000, /* R125 */
- 0x0000, /* R126 */
- 0x0000, /* R127 */
- 0x1FFF, /* R128 - GPIO Debounce */
- 0x0000, /* R129 - GPIO Pin pull up Control */
- 0x03FC, /* R130 - GPIO Pull down Control */
- 0x0000, /* R131 - GPIO Interrupt Mode */
- 0x0000, /* R132 */
- 0x0000, /* R133 - GPIO Control */
- 0x08FB, /* R134 - GPIO Configuration (i/o) */
- 0x0CFE, /* R135 - GPIO Pin Polarity / Type */
- 0x0000, /* R136 */
- 0x0000, /* R137 */
- 0x0000, /* R138 */
- 0x0000, /* R139 */
- 0x0312, /* R140 - GPIO Function Select 1 */
- 0x0003, /* R141 - GPIO Function Select 2 */
- 0x2331, /* R142 - GPIO Function Select 3 */
- 0x0003, /* R143 - GPIO Function Select 4 */
- 0x0000, /* R144 - Digitiser Control (1) */
- 0x0002, /* R145 - Digitiser Control (2) */
- 0x0000, /* R146 */
- 0x0000, /* R147 */
- 0x0000, /* R148 */
- 0x0000, /* R149 */
- 0x0000, /* R150 */
- 0x0000, /* R151 */
- 0x7000, /* R152 - AUX1 Readback */
- 0x7000, /* R153 - AUX2 Readback */
- 0x7000, /* R154 - AUX3 Readback */
- 0x7000, /* R155 - AUX4 Readback */
- 0x0000, /* R156 - USB Voltage Readback */
- 0x0000, /* R157 - LINE Voltage Readback */
- 0x0000, /* R158 - BATT Voltage Readback */
- 0x0000, /* R159 - Chip Temp Readback */
- 0x0000, /* R160 */
- 0x0000, /* R161 */
- 0x0000, /* R162 */
- 0x0000, /* R163 - Generic Comparator Control */
- 0x0000, /* R164 - Generic comparator 1 */
- 0x0000, /* R165 - Generic comparator 2 */
- 0x0000, /* R166 - Generic comparator 3 */
- 0x0000, /* R167 - Generic comparator 4 */
- 0xA00F, /* R168 - Battery Charger Control 1 */
- 0x0B06, /* R169 - Battery Charger Control 2 */
- 0x0000, /* R170 - Battery Charger Control 3 */
- 0x0000, /* R171 */
- 0x0000, /* R172 - Current Sink Driver A */
- 0x0000, /* R173 - CSA Flash control */
- 0x0000, /* R174 - Current Sink Driver B */
- 0x0000, /* R175 - CSB Flash control */
- 0x0000, /* R176 - DCDC/LDO requested */
- 0x002D, /* R177 - DCDC Active options */
- 0x0000, /* R178 - DCDC Sleep options */
- 0x0025, /* R179 - Power-check comparator */
- 0x000E, /* R180 - DCDC1 Control */
- 0x0400, /* R181 - DCDC1 Timeouts */
- 0x1006, /* R182 - DCDC1 Low Power */
- 0x0018, /* R183 - DCDC2 Control */
- 0x0000, /* R184 - DCDC2 Timeouts */
- 0x0000, /* R185 */
- 0x002E, /* R186 - DCDC3 Control */
- 0x0800, /* R187 - DCDC3 Timeouts */
- 0x0006, /* R188 - DCDC3 Low Power */
- 0x000E, /* R189 - DCDC4 Control */
- 0x0800, /* R190 - DCDC4 Timeouts */
- 0x0006, /* R191 - DCDC4 Low Power */
- 0x0008, /* R192 - DCDC5 Control */
- 0x0000, /* R193 - DCDC5 Timeouts */
- 0x0000, /* R194 */
- 0x0026, /* R195 - DCDC6 Control */
- 0x0C00, /* R196 - DCDC6 Timeouts */
- 0x0006, /* R197 - DCDC6 Low Power */
- 0x0000, /* R198 */
- 0x0003, /* R199 - Limit Switch Control */
- 0x001A, /* R200 - LDO1 Control */
- 0x0800, /* R201 - LDO1 Timeouts */
- 0x001C, /* R202 - LDO1 Low Power */
- 0x0010, /* R203 - LDO2 Control */
- 0x0800, /* R204 - LDO2 Timeouts */
- 0x001C, /* R205 - LDO2 Low Power */
- 0x000A, /* R206 - LDO3 Control */
- 0x0C00, /* R207 - LDO3 Timeouts */
- 0x001C, /* R208 - LDO3 Low Power */
- 0x001A, /* R209 - LDO4 Control */
- 0x0800, /* R210 - LDO4 Timeouts */
- 0x001C, /* R211 - LDO4 Low Power */
- 0x0000, /* R212 */
- 0x0000, /* R213 */
- 0x0000, /* R214 */
- 0x0000, /* R215 - VCC_FAULT Masks */
- 0x001F, /* R216 - Main Bandgap Control */
- 0x0000, /* R217 - OSC Control */
- 0x9000, /* R218 - RTC Tick Control */
- 0x0000, /* R219 */
- 0x4000, /* R220 - RAM BIST 1 */
- 0x0000, /* R221 */
- 0x0000, /* R222 */
- 0x0000, /* R223 */
- 0x0000, /* R224 */
- 0x0000, /* R225 - DCDC/LDO status */
- 0x0000, /* R226 */
- 0x0000, /* R227 */
- 0x0000, /* R228 */
- 0x0000, /* R229 */
- 0xE000, /* R230 - GPIO Pin Status */
- 0x0000, /* R231 */
- 0x0000, /* R232 */
- 0x0000, /* R233 */
- 0x0000, /* R234 */
- 0x0000, /* R235 */
- 0x0000, /* R236 */
- 0x0000, /* R237 */
- 0x0000, /* R238 */
- 0x0000, /* R239 */
- 0x0000, /* R240 */
- 0x0000, /* R241 */
- 0x0000, /* R242 */
- 0x0000, /* R243 */
- 0x0000, /* R244 */
- 0x0000, /* R245 */
- 0x0000, /* R246 */
- 0x0000, /* R247 */
- 0x0000, /* R248 */
- 0x0000, /* R249 */
- 0x0000, /* R250 */
- 0x0000, /* R251 */
- 0x0000, /* R252 */
- 0x0000, /* R253 */
- 0x0000, /* R254 */
- 0x0000, /* R255 */
-};
-#endif
-
-#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_3
-
-#undef WM8350_HAVE_CONFIG_MODE
-#define WM8350_HAVE_CONFIG_MODE
-
-const u16 wm8350_mode3_defaults[] = {
- 0x17FF, /* R0 - Reset/ID */
- 0x1000, /* R1 - ID */
- 0x0000, /* R2 */
- 0x1000, /* R3 - System Control 1 */
- 0x0004, /* R4 - System Control 2 */
- 0x0000, /* R5 - System Hibernate */
- 0x8A00, /* R6 - Interface Control */
- 0x0000, /* R7 */
- 0x8000, /* R8 - Power mgmt (1) */
- 0x0000, /* R9 - Power mgmt (2) */
- 0x0000, /* R10 - Power mgmt (3) */
- 0x2000, /* R11 - Power mgmt (4) */
- 0x0E00, /* R12 - Power mgmt (5) */
- 0x0000, /* R13 - Power mgmt (6) */
- 0x0000, /* R14 - Power mgmt (7) */
- 0x0000, /* R15 */
- 0x0000, /* R16 - RTC Seconds/Minutes */
- 0x0100, /* R17 - RTC Hours/Day */
- 0x0101, /* R18 - RTC Date/Month */
- 0x1400, /* R19 - RTC Year */
- 0x0000, /* R20 - Alarm Seconds/Minutes */
- 0x0000, /* R21 - Alarm Hours/Day */
- 0x0000, /* R22 - Alarm Date/Month */
- 0x0320, /* R23 - RTC Time Control */
- 0x0000, /* R24 - System Interrupts */
- 0x0000, /* R25 - Interrupt Status 1 */
- 0x0000, /* R26 - Interrupt Status 2 */
- 0x0000, /* R27 - Power Up Interrupt Status */
- 0x0000, /* R28 - Under Voltage Interrupt status */
- 0x0000, /* R29 - Over Current Interrupt status */
- 0x0000, /* R30 - GPIO Interrupt Status */
- 0x0000, /* R31 - Comparator Interrupt Status */
- 0x3FFF, /* R32 - System Interrupts Mask */
- 0x0000, /* R33 - Interrupt Status 1 Mask */
- 0x0000, /* R34 - Interrupt Status 2 Mask */
- 0x0000, /* R35 - Power Up Interrupt Status Mask */
- 0x0000, /* R36 - Under Voltage Interrupt status Mask */
- 0x0000, /* R37 - Over Current Interrupt status Mask */
- 0x0000, /* R38 - GPIO Interrupt Status Mask */
- 0x0000, /* R39 - Comparator Interrupt Status Mask */
- 0x0040, /* R40 - Clock Control 1 */
- 0x0000, /* R41 - Clock Control 2 */
- 0x3B00, /* R42 - FLL Control 1 */
- 0x7086, /* R43 - FLL Control 2 */
- 0xC226, /* R44 - FLL Control 3 */
- 0x0000, /* R45 - FLL Control 4 */
- 0x0000, /* R46 */
- 0x0000, /* R47 */
- 0x0000, /* R48 - DAC Control */
- 0x0000, /* R49 */
- 0x00C0, /* R50 - DAC Digital Volume L */
- 0x00C0, /* R51 - DAC Digital Volume R */
- 0x0000, /* R52 */
- 0x0040, /* R53 - DAC LR Rate */
- 0x0000, /* R54 - DAC Clock Control */
- 0x0000, /* R55 */
- 0x0000, /* R56 */
- 0x0000, /* R57 */
- 0x4000, /* R58 - DAC Mute */
- 0x0000, /* R59 - DAC Mute Volume */
- 0x0000, /* R60 - DAC Side */
- 0x0000, /* R61 */
- 0x0000, /* R62 */
- 0x0000, /* R63 */
- 0x8000, /* R64 - ADC Control */
- 0x0000, /* R65 */
- 0x00C0, /* R66 - ADC Digital Volume L */
- 0x00C0, /* R67 - ADC Digital Volume R */
- 0x0000, /* R68 - ADC Divider */
- 0x0000, /* R69 */
- 0x0040, /* R70 - ADC LR Rate */
- 0x0000, /* R71 */
- 0x0303, /* R72 - Input Control */
- 0x0000, /* R73 - IN3 Input Control */
- 0x0000, /* R74 - Mic Bias Control */
- 0x0000, /* R75 */
- 0x0000, /* R76 - Output Control */
- 0x0000, /* R77 - Jack Detect */
- 0x0000, /* R78 - Anti Pop Control */
- 0x0000, /* R79 */
- 0x0040, /* R80 - Left Input Volume */
- 0x0040, /* R81 - Right Input Volume */
- 0x0000, /* R82 */
- 0x0000, /* R83 */
- 0x0000, /* R84 */
- 0x0000, /* R85 */
- 0x0000, /* R86 */
- 0x0000, /* R87 */
- 0x0800, /* R88 - Left Mixer Control */
- 0x1000, /* R89 - Right Mixer Control */
- 0x0000, /* R90 */
- 0x0000, /* R91 */
- 0x0000, /* R92 - OUT3 Mixer Control */
- 0x0000, /* R93 - OUT4 Mixer Control */
- 0x0000, /* R94 */
- 0x0000, /* R95 */
- 0x0000, /* R96 - Output Left Mixer Volume */
- 0x0000, /* R97 - Output Right Mixer Volume */
- 0x0000, /* R98 - Input Mixer Volume L */
- 0x0000, /* R99 - Input Mixer Volume R */
- 0x0000, /* R100 - Input Mixer Volume */
- 0x0000, /* R101 */
- 0x0000, /* R102 */
- 0x0000, /* R103 */
- 0x00E4, /* R104 - LOUT1 Volume */
- 0x00E4, /* R105 - ROUT1 Volume */
- 0x00E4, /* R106 - LOUT2 Volume */
- 0x02E4, /* R107 - ROUT2 Volume */
- 0x0000, /* R108 */
- 0x0000, /* R109 */
- 0x0000, /* R110 */
- 0x0000, /* R111 - BEEP Volume */
- 0x0A00, /* R112 - AI Formating */
- 0x0000, /* R113 - ADC DAC COMP */
- 0x0020, /* R114 - AI ADC Control */
- 0x0020, /* R115 - AI DAC Control */
- 0x0000, /* R116 - AIF Test */
- 0x0000, /* R117 */
- 0x0000, /* R118 */
- 0x0000, /* R119 */
- 0x0000, /* R120 */
- 0x0000, /* R121 */
- 0x0000, /* R122 */
- 0x0000, /* R123 */
- 0x0000, /* R124 */
- 0x0000, /* R125 */
- 0x0000, /* R126 */
- 0x0000, /* R127 */
- 0x1FFF, /* R128 - GPIO Debounce */
- 0x0000, /* R129 - GPIO Pin pull up Control */
- 0x03FC, /* R130 - GPIO Pull down Control */
- 0x0000, /* R131 - GPIO Interrupt Mode */
- 0x0000, /* R132 */
- 0x0000, /* R133 - GPIO Control */
- 0x0A7B, /* R134 - GPIO Configuration (i/o) */
- 0x06FE, /* R135 - GPIO Pin Polarity / Type */
- 0x0000, /* R136 */
- 0x0000, /* R137 */
- 0x0000, /* R138 */
- 0x0000, /* R139 */
- 0x1312, /* R140 - GPIO Function Select 1 */
- 0x1030, /* R141 - GPIO Function Select 2 */
- 0x2231, /* R142 - GPIO Function Select 3 */
- 0x0003, /* R143 - GPIO Function Select 4 */
- 0x0000, /* R144 - Digitiser Control (1) */
- 0x0002, /* R145 - Digitiser Control (2) */
- 0x0000, /* R146 */
- 0x0000, /* R147 */
- 0x0000, /* R148 */
- 0x0000, /* R149 */
- 0x0000, /* R150 */
- 0x0000, /* R151 */
- 0x7000, /* R152 - AUX1 Readback */
- 0x7000, /* R153 - AUX2 Readback */
- 0x7000, /* R154 - AUX3 Readback */
- 0x7000, /* R155 - AUX4 Readback */
- 0x0000, /* R156 - USB Voltage Readback */
- 0x0000, /* R157 - LINE Voltage Readback */
- 0x0000, /* R158 - BATT Voltage Readback */
- 0x0000, /* R159 - Chip Temp Readback */
- 0x0000, /* R160 */
- 0x0000, /* R161 */
- 0x0000, /* R162 */
- 0x0000, /* R163 - Generic Comparator Control */
- 0x0000, /* R164 - Generic comparator 1 */
- 0x0000, /* R165 - Generic comparator 2 */
- 0x0000, /* R166 - Generic comparator 3 */
- 0x0000, /* R167 - Generic comparator 4 */
- 0xA00F, /* R168 - Battery Charger Control 1 */
- 0x0B06, /* R169 - Battery Charger Control 2 */
- 0x0000, /* R170 - Battery Charger Control 3 */
- 0x0000, /* R171 */
- 0x0000, /* R172 - Current Sink Driver A */
- 0x0000, /* R173 - CSA Flash control */
- 0x0000, /* R174 - Current Sink Driver B */
- 0x0000, /* R175 - CSB Flash control */
- 0x0000, /* R176 - DCDC/LDO requested */
- 0x002D, /* R177 - DCDC Active options */
- 0x0000, /* R178 - DCDC Sleep options */
- 0x0025, /* R179 - Power-check comparator */
- 0x000E, /* R180 - DCDC1 Control */
- 0x0400, /* R181 - DCDC1 Timeouts */
- 0x1006, /* R182 - DCDC1 Low Power */
- 0x0018, /* R183 - DCDC2 Control */
- 0x0000, /* R184 - DCDC2 Timeouts */
- 0x0000, /* R185 */
- 0x000E, /* R186 - DCDC3 Control */
- 0x0400, /* R187 - DCDC3 Timeouts */
- 0x0006, /* R188 - DCDC3 Low Power */
- 0x0026, /* R189 - DCDC4 Control */
- 0x0400, /* R190 - DCDC4 Timeouts */
- 0x0006, /* R191 - DCDC4 Low Power */
- 0x0008, /* R192 - DCDC5 Control */
- 0x0000, /* R193 - DCDC5 Timeouts */
- 0x0000, /* R194 */
- 0x0026, /* R195 - DCDC6 Control */
- 0x0400, /* R196 - DCDC6 Timeouts */
- 0x0006, /* R197 - DCDC6 Low Power */
- 0x0000, /* R198 */
- 0x0003, /* R199 - Limit Switch Control */
- 0x001C, /* R200 - LDO1 Control */
- 0x0000, /* R201 - LDO1 Timeouts */
- 0x001C, /* R202 - LDO1 Low Power */
- 0x001C, /* R203 - LDO2 Control */
- 0x0400, /* R204 - LDO2 Timeouts */
- 0x001C, /* R205 - LDO2 Low Power */
- 0x001C, /* R206 - LDO3 Control */
- 0x0400, /* R207 - LDO3 Timeouts */
- 0x001C, /* R208 - LDO3 Low Power */
- 0x001F, /* R209 - LDO4 Control */
- 0x0400, /* R210 - LDO4 Timeouts */
- 0x001C, /* R211 - LDO4 Low Power */
- 0x0000, /* R212 */
- 0x0000, /* R213 */
- 0x0000, /* R214 */
- 0x0000, /* R215 - VCC_FAULT Masks */
- 0x001F, /* R216 - Main Bandgap Control */
- 0x0000, /* R217 - OSC Control */
- 0x9000, /* R218 - RTC Tick Control */
- 0x0000, /* R219 */
- 0x4000, /* R220 - RAM BIST 1 */
- 0x0000, /* R221 */
- 0x0000, /* R222 */
- 0x0000, /* R223 */
- 0x0000, /* R224 */
- 0x0000, /* R225 - DCDC/LDO status */
- 0x0000, /* R226 */
- 0x0000, /* R227 */
- 0x0000, /* R228 */
- 0x0000, /* R229 */
- 0xE000, /* R230 - GPIO Pin Status */
- 0x0000, /* R231 */
- 0x0000, /* R232 */
- 0x0000, /* R233 */
- 0x0000, /* R234 */
- 0x0000, /* R235 */
- 0x0000, /* R236 */
- 0x0000, /* R237 */
- 0x0000, /* R238 */
- 0x0000, /* R239 */
- 0x0000, /* R240 */
- 0x0000, /* R241 */
- 0x0000, /* R242 */
- 0x0000, /* R243 */
- 0x0000, /* R244 */
- 0x0000, /* R245 */
- 0x0000, /* R246 */
- 0x0000, /* R247 */
- 0x0000, /* R248 */
- 0x0000, /* R249 */
- 0x0000, /* R250 */
- 0x0000, /* R251 */
- 0x0000, /* R252 */
- 0x0000, /* R253 */
- 0x0000, /* R254 */
- 0x0000, /* R255 */
-};
-#endif
-
-#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_0
-
-#undef WM8350_HAVE_CONFIG_MODE
-#define WM8350_HAVE_CONFIG_MODE
-
-const u16 wm8351_mode0_defaults[] = {
- 0x6143, /* R0 - Reset/ID */
- 0x0000, /* R1 - ID */
- 0x0001, /* R2 - Revision */
- 0x1C02, /* R3 - System Control 1 */
- 0x0004, /* R4 - System Control 2 */
- 0x0000, /* R5 - System Hibernate */
- 0x8A00, /* R6 - Interface Control */
- 0x0000, /* R7 */
- 0x8000, /* R8 - Power mgmt (1) */
- 0x0000, /* R9 - Power mgmt (2) */
- 0x0000, /* R10 - Power mgmt (3) */
- 0x2000, /* R11 - Power mgmt (4) */
- 0x0E00, /* R12 - Power mgmt (5) */
- 0x0000, /* R13 - Power mgmt (6) */
- 0x0000, /* R14 - Power mgmt (7) */
- 0x0000, /* R15 */
- 0x0000, /* R16 - RTC Seconds/Minutes */
- 0x0100, /* R17 - RTC Hours/Day */
- 0x0101, /* R18 - RTC Date/Month */
- 0x1400, /* R19 - RTC Year */
- 0x0000, /* R20 - Alarm Seconds/Minutes */
- 0x0000, /* R21 - Alarm Hours/Day */
- 0x0000, /* R22 - Alarm Date/Month */
- 0x0320, /* R23 - RTC Time Control */
- 0x0000, /* R24 - System Interrupts */
- 0x0000, /* R25 - Interrupt Status 1 */
- 0x0000, /* R26 - Interrupt Status 2 */
- 0x0000, /* R27 */
- 0x0000, /* R28 - Under Voltage Interrupt status */
- 0x0000, /* R29 - Over Current Interrupt status */
- 0x0000, /* R30 - GPIO Interrupt Status */
- 0x0000, /* R31 - Comparator Interrupt Status */
- 0x3FFF, /* R32 - System Interrupts Mask */
- 0x0000, /* R33 - Interrupt Status 1 Mask */
- 0x0000, /* R34 - Interrupt Status 2 Mask */
- 0x0000, /* R35 */
- 0x0000, /* R36 - Under Voltage Interrupt status Mask */
- 0x0000, /* R37 - Over Current Interrupt status Mask */
- 0x0000, /* R38 - GPIO Interrupt Status Mask */
- 0x0000, /* R39 - Comparator Interrupt Status Mask */
- 0x0040, /* R40 - Clock Control 1 */
- 0x0000, /* R41 - Clock Control 2 */
- 0x3A00, /* R42 - FLL Control 1 */
- 0x7086, /* R43 - FLL Control 2 */
- 0xC226, /* R44 - FLL Control 3 */
- 0x0000, /* R45 - FLL Control 4 */
- 0x0000, /* R46 */
- 0x0000, /* R47 */
- 0x0000, /* R48 - DAC Control */
- 0x0000, /* R49 */
- 0x00C0, /* R50 - DAC Digital Volume L */
- 0x00C0, /* R51 - DAC Digital Volume R */
- 0x0000, /* R52 */
- 0x0040, /* R53 - DAC LR Rate */
- 0x0000, /* R54 - DAC Clock Control */
- 0x0000, /* R55 */
- 0x0000, /* R56 */
- 0x0000, /* R57 */
- 0x4000, /* R58 - DAC Mute */
- 0x0000, /* R59 - DAC Mute Volume */
- 0x0000, /* R60 - DAC Side */
- 0x0000, /* R61 */
- 0x0000, /* R62 */
- 0x0000, /* R63 */
- 0x8000, /* R64 - ADC Control */
- 0x0000, /* R65 */
- 0x00C0, /* R66 - ADC Digital Volume L */
- 0x00C0, /* R67 - ADC Digital Volume R */
- 0x0000, /* R68 - ADC Divider */
- 0x0000, /* R69 */
- 0x0040, /* R70 - ADC LR Rate */
- 0x0000, /* R71 */
- 0x0303, /* R72 - Input Control */
- 0x0000, /* R73 - IN3 Input Control */
- 0x0000, /* R74 - Mic Bias Control */
- 0x0000, /* R75 */
- 0x0000, /* R76 - Output Control */
- 0x0000, /* R77 - Jack Detect */
- 0x0000, /* R78 - Anti Pop Control */
- 0x0000, /* R79 */
- 0x0040, /* R80 - Left Input Volume */
- 0x0040, /* R81 - Right Input Volume */
- 0x0000, /* R82 */
- 0x0000, /* R83 */
- 0x0000, /* R84 */
- 0x0000, /* R85 */
- 0x0000, /* R86 */
- 0x0000, /* R87 */
- 0x0800, /* R88 - Left Mixer Control */
- 0x1000, /* R89 - Right Mixer Control */
- 0x0000, /* R90 */
- 0x0000, /* R91 */
- 0x0000, /* R92 - OUT3 Mixer Control */
- 0x0000, /* R93 - OUT4 Mixer Control */
- 0x0000, /* R94 */
- 0x0000, /* R95 */
- 0x0000, /* R96 - Output Left Mixer Volume */
- 0x0000, /* R97 - Output Right Mixer Volume */
- 0x0000, /* R98 - Input Mixer Volume L */
- 0x0000, /* R99 - Input Mixer Volume R */
- 0x0000, /* R100 - Input Mixer Volume */
- 0x0000, /* R101 */
- 0x0000, /* R102 */
- 0x0000, /* R103 */
- 0x00E4, /* R104 - OUT1L Volume */
- 0x00E4, /* R105 - OUT1R Volume */
- 0x00E4, /* R106 - OUT2L Volume */
- 0x02E4, /* R107 - OUT2R Volume */
- 0x0000, /* R108 */
- 0x0000, /* R109 */
- 0x0000, /* R110 */
- 0x0000, /* R111 - BEEP Volume */
- 0x0A00, /* R112 - AI Formating */
- 0x0000, /* R113 - ADC DAC COMP */
- 0x0020, /* R114 - AI ADC Control */
- 0x0020, /* R115 - AI DAC Control */
- 0x0000, /* R116 */
- 0x0000, /* R117 */
- 0x0000, /* R118 */
- 0x0000, /* R119 */
- 0x0000, /* R120 */
- 0x0000, /* R121 */
- 0x0000, /* R122 */
- 0x0000, /* R123 */
- 0x0000, /* R124 */
- 0x0000, /* R125 */
- 0x0000, /* R126 */
- 0x0000, /* R127 */
- 0x1FFF, /* R128 - GPIO Debounce */
- 0x0000, /* R129 - GPIO Pin pull up Control */
- 0x0000, /* R130 - GPIO Pull down Control */
- 0x0000, /* R131 - GPIO Interrupt Mode */
- 0x0000, /* R132 */
- 0x0000, /* R133 - GPIO Control */
- 0x0FFC, /* R134 - GPIO Configuration (i/o) */
- 0x0FFC, /* R135 - GPIO Pin Polarity / Type */
- 0x0000, /* R136 */
- 0x0000, /* R137 */
- 0x0000, /* R138 */
- 0x0000, /* R139 */
- 0x0013, /* R140 - GPIO Function Select 1 */
- 0x0000, /* R141 - GPIO Function Select 2 */
- 0x0000, /* R142 - GPIO Function Select 3 */
- 0x0003, /* R143 - GPIO Function Select 4 */
- 0x0000, /* R144 - Digitiser Control (1) */
- 0x0002, /* R145 - Digitiser Control (2) */
- 0x0000, /* R146 */
- 0x0000, /* R147 */
- 0x0000, /* R148 */
- 0x0000, /* R149 */
- 0x0000, /* R150 */
- 0x0000, /* R151 */
- 0x7000, /* R152 - AUX1 Readback */
- 0x7000, /* R153 - AUX2 Readback */
- 0x7000, /* R154 - AUX3 Readback */
- 0x7000, /* R155 - AUX4 Readback */
- 0x0000, /* R156 - USB Voltage Readback */
- 0x0000, /* R157 - LINE Voltage Readback */
- 0x0000, /* R158 - BATT Voltage Readback */
- 0x0000, /* R159 - Chip Temp Readback */
- 0x0000, /* R160 */
- 0x0000, /* R161 */
- 0x0000, /* R162 */
- 0x0000, /* R163 - Generic Comparator Control */
- 0x0000, /* R164 - Generic comparator 1 */
- 0x0000, /* R165 - Generic comparator 2 */
- 0x0000, /* R166 - Generic comparator 3 */
- 0x0000, /* R167 - Generic comparator 4 */
- 0xA00F, /* R168 - Battery Charger Control 1 */
- 0x0B06, /* R169 - Battery Charger Control 2 */
- 0x0000, /* R170 - Battery Charger Control 3 */
- 0x0000, /* R171 */
- 0x0000, /* R172 - Current Sink Driver A */
- 0x0000, /* R173 - CSA Flash control */
- 0x0000, /* R174 */
- 0x0000, /* R175 */
- 0x0000, /* R176 - DCDC/LDO requested */
- 0x032D, /* R177 - DCDC Active options */
- 0x0000, /* R178 - DCDC Sleep options */
- 0x0025, /* R179 - Power-check comparator */
- 0x000E, /* R180 - DCDC1 Control */
- 0x0000, /* R181 - DCDC1 Timeouts */
- 0x1006, /* R182 - DCDC1 Low Power */
- 0x0018, /* R183 - DCDC2 Control */
- 0x0000, /* R184 - DCDC2 Timeouts */
- 0x0000, /* R185 */
- 0x0000, /* R186 - DCDC3 Control */
- 0x0000, /* R187 - DCDC3 Timeouts */
- 0x0006, /* R188 - DCDC3 Low Power */
- 0x0000, /* R189 - DCDC4 Control */
- 0x0000, /* R190 - DCDC4 Timeouts */
- 0x0006, /* R191 - DCDC4 Low Power */
- 0x0008, /* R192 */
- 0x0000, /* R193 */
- 0x0000, /* R194 */
- 0x0000, /* R195 */
- 0x0000, /* R196 */
- 0x0006, /* R197 */
- 0x0000, /* R198 */
- 0x0003, /* R199 - Limit Switch Control */
- 0x001C, /* R200 - LDO1 Control */
- 0x0000, /* R201 - LDO1 Timeouts */
- 0x001C, /* R202 - LDO1 Low Power */
- 0x001B, /* R203 - LDO2 Control */
- 0x0000, /* R204 - LDO2 Timeouts */
- 0x001C, /* R205 - LDO2 Low Power */
- 0x001B, /* R206 - LDO3 Control */
- 0x0000, /* R207 - LDO3 Timeouts */
- 0x001C, /* R208 - LDO3 Low Power */
- 0x001B, /* R209 - LDO4 Control */
- 0x0000, /* R210 - LDO4 Timeouts */
- 0x001C, /* R211 - LDO4 Low Power */
- 0x0000, /* R212 */
- 0x0000, /* R213 */
- 0x0000, /* R214 */
- 0x0000, /* R215 - VCC_FAULT Masks */
- 0x001F, /* R216 - Main Bandgap Control */
- 0x0000, /* R217 - OSC Control */
- 0x9000, /* R218 - RTC Tick Control */
- 0x0000, /* R219 - Security1 */
- 0x4000, /* R220 */
- 0x0000, /* R221 */
- 0x0000, /* R222 */
- 0x0000, /* R223 */
- 0x0000, /* R224 - Signal overrides */
- 0x0000, /* R225 - DCDC/LDO status */
- 0x0000, /* R226 - Charger Overides/status */
- 0x0000, /* R227 - misc overrides */
- 0x0000, /* R228 - Supply overrides/status 1 */
- 0x0000, /* R229 - Supply overrides/status 2 */
- 0xE000, /* R230 - GPIO Pin Status */
- 0x0000, /* R231 - comparotor overrides */
- 0x0000, /* R232 */
- 0x0000, /* R233 - State Machine status */
- 0x1200, /* R234 - FLL Test 1 */
- 0x0000, /* R235 */
- 0x8000, /* R236 */
- 0x0000, /* R237 */
- 0x0000, /* R238 */
- 0x0000, /* R239 */
- 0x0003, /* R240 */
- 0x0000, /* R241 */
- 0x0000, /* R242 */
- 0x0004, /* R243 */
- 0x0300, /* R244 */
- 0x0000, /* R245 */
- 0x0200, /* R246 */
- 0x0000, /* R247 */
- 0x1000, /* R248 - DCDC1 Test Controls */
- 0x1000, /* R249 */
- 0x1000, /* R250 - DCDC3 Test Controls */
- 0x1000, /* R251 - DCDC4 Test Controls */
-};
-#endif
-
-#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_1
-
-#undef WM8350_HAVE_CONFIG_MODE
-#define WM8350_HAVE_CONFIG_MODE
-
-const u16 wm8351_mode1_defaults[] = {
- 0x6143, /* R0 - Reset/ID */
- 0x0000, /* R1 - ID */
- 0x0001, /* R2 - Revision */
- 0x1C02, /* R3 - System Control 1 */
- 0x0204, /* R4 - System Control 2 */
- 0x0000, /* R5 - System Hibernate */
- 0x8A00, /* R6 - Interface Control */
- 0x0000, /* R7 */
- 0x8000, /* R8 - Power mgmt (1) */
- 0x0000, /* R9 - Power mgmt (2) */
- 0x0000, /* R10 - Power mgmt (3) */
- 0x2000, /* R11 - Power mgmt (4) */
- 0x0E00, /* R12 - Power mgmt (5) */
- 0x0000, /* R13 - Power mgmt (6) */
- 0x0000, /* R14 - Power mgmt (7) */
- 0x0000, /* R15 */
- 0x0000, /* R16 - RTC Seconds/Minutes */
- 0x0100, /* R17 - RTC Hours/Day */
- 0x0101, /* R18 - RTC Date/Month */
- 0x1400, /* R19 - RTC Year */
- 0x0000, /* R20 - Alarm Seconds/Minutes */
- 0x0000, /* R21 - Alarm Hours/Day */
- 0x0000, /* R22 - Alarm Date/Month */
- 0x0320, /* R23 - RTC Time Control */
- 0x0000, /* R24 - System Interrupts */
- 0x0000, /* R25 - Interrupt Status 1 */
- 0x0000, /* R26 - Interrupt Status 2 */
- 0x0000, /* R27 */
- 0x0000, /* R28 - Under Voltage Interrupt status */
- 0x0000, /* R29 - Over Current Interrupt status */
- 0x0000, /* R30 - GPIO Interrupt Status */
- 0x0000, /* R31 - Comparator Interrupt Status */
- 0x3FFF, /* R32 - System Interrupts Mask */
- 0x0000, /* R33 - Interrupt Status 1 Mask */
- 0x0000, /* R34 - Interrupt Status 2 Mask */
- 0x0000, /* R35 */
- 0x0000, /* R36 - Under Voltage Interrupt status Mask */
- 0x0000, /* R37 - Over Current Interrupt status Mask */
- 0x0000, /* R38 - GPIO Interrupt Status Mask */
- 0x0000, /* R39 - Comparator Interrupt Status Mask */
- 0x0040, /* R40 - Clock Control 1 */
- 0x0000, /* R41 - Clock Control 2 */
- 0x3A00, /* R42 - FLL Control 1 */
- 0x7086, /* R43 - FLL Control 2 */
- 0xC226, /* R44 - FLL Control 3 */
- 0x0000, /* R45 - FLL Control 4 */
- 0x0000, /* R46 */
- 0x0000, /* R47 */
- 0x0000, /* R48 - DAC Control */
- 0x0000, /* R49 */
- 0x00C0, /* R50 - DAC Digital Volume L */
- 0x00C0, /* R51 - DAC Digital Volume R */
- 0x0000, /* R52 */
- 0x0040, /* R53 - DAC LR Rate */
- 0x0000, /* R54 - DAC Clock Control */
- 0x0000, /* R55 */
- 0x0000, /* R56 */
- 0x0000, /* R57 */
- 0x4000, /* R58 - DAC Mute */
- 0x0000, /* R59 - DAC Mute Volume */
- 0x0000, /* R60 - DAC Side */
- 0x0000, /* R61 */
- 0x0000, /* R62 */
- 0x0000, /* R63 */
- 0x8000, /* R64 - ADC Control */
- 0x0000, /* R65 */
- 0x00C0, /* R66 - ADC Digital Volume L */
- 0x00C0, /* R67 - ADC Digital Volume R */
- 0x0000, /* R68 - ADC Divider */
- 0x0000, /* R69 */
- 0x0040, /* R70 - ADC LR Rate */
- 0x0000, /* R71 */
- 0x0303, /* R72 - Input Control */
- 0x0000, /* R73 - IN3 Input Control */
- 0x0000, /* R74 - Mic Bias Control */
- 0x0000, /* R75 */
- 0x0000, /* R76 - Output Control */
- 0x0000, /* R77 - Jack Detect */
- 0x0000, /* R78 - Anti Pop Control */
- 0x0000, /* R79 */
- 0x0040, /* R80 - Left Input Volume */
- 0x0040, /* R81 - Right Input Volume */
- 0x0000, /* R82 */
- 0x0000, /* R83 */
- 0x0000, /* R84 */
- 0x0000, /* R85 */
- 0x0000, /* R86 */
- 0x0000, /* R87 */
- 0x0800, /* R88 - Left Mixer Control */
- 0x1000, /* R89 - Right Mixer Control */
- 0x0000, /* R90 */
- 0x0000, /* R91 */
- 0x0000, /* R92 - OUT3 Mixer Control */
- 0x0000, /* R93 - OUT4 Mixer Control */
- 0x0000, /* R94 */
- 0x0000, /* R95 */
- 0x0000, /* R96 - Output Left Mixer Volume */
- 0x0000, /* R97 - Output Right Mixer Volume */
- 0x0000, /* R98 - Input Mixer Volume L */
- 0x0000, /* R99 - Input Mixer Volume R */
- 0x0000, /* R100 - Input Mixer Volume */
- 0x0000, /* R101 */
- 0x0000, /* R102 */
- 0x0000, /* R103 */
- 0x00E4, /* R104 - OUT1L Volume */
- 0x00E4, /* R105 - OUT1R Volume */
- 0x00E4, /* R106 - OUT2L Volume */
- 0x02E4, /* R107 - OUT2R Volume */
- 0x0000, /* R108 */
- 0x0000, /* R109 */
- 0x0000, /* R110 */
- 0x0000, /* R111 - BEEP Volume */
- 0x0A00, /* R112 - AI Formating */
- 0x0000, /* R113 - ADC DAC COMP */
- 0x0020, /* R114 - AI ADC Control */
- 0x0020, /* R115 - AI DAC Control */
- 0x0000, /* R116 */
- 0x0000, /* R117 */
- 0x0000, /* R118 */
- 0x0000, /* R119 */
- 0x0000, /* R120 */
- 0x0000, /* R121 */
- 0x0000, /* R122 */
- 0x0000, /* R123 */
- 0x0000, /* R124 */
- 0x0000, /* R125 */
- 0x0000, /* R126 */
- 0x0000, /* R127 */
- 0x1FFF, /* R128 - GPIO Debounce */
- 0x0000, /* R129 - GPIO Pin pull up Control */
- 0x0000, /* R130 - GPIO Pull down Control */
- 0x0000, /* R131 - GPIO Interrupt Mode */
- 0x0000, /* R132 */
- 0x0000, /* R133 - GPIO Control */
- 0x0CFB, /* R134 - GPIO Configuration (i/o) */
- 0x0C1F, /* R135 - GPIO Pin Polarity / Type */
- 0x0000, /* R136 */
- 0x0000, /* R137 */
- 0x0000, /* R138 */
- 0x0000, /* R139 */
- 0x0300, /* R140 - GPIO Function Select 1 */
- 0x1110, /* R141 - GPIO Function Select 2 */
- 0x0013, /* R142 - GPIO Function Select 3 */
- 0x0003, /* R143 - GPIO Function Select 4 */
- 0x0000, /* R144 - Digitiser Control (1) */
- 0x0002, /* R145 - Digitiser Control (2) */
- 0x0000, /* R146 */
- 0x0000, /* R147 */
- 0x0000, /* R148 */
- 0x0000, /* R149 */
- 0x0000, /* R150 */
- 0x0000, /* R151 */
- 0x7000, /* R152 - AUX1 Readback */
- 0x7000, /* R153 - AUX2 Readback */
- 0x7000, /* R154 - AUX3 Readback */
- 0x7000, /* R155 - AUX4 Readback */
- 0x0000, /* R156 - USB Voltage Readback */
- 0x0000, /* R157 - LINE Voltage Readback */
- 0x0000, /* R158 - BATT Voltage Readback */
- 0x0000, /* R159 - Chip Temp Readback */
- 0x0000, /* R160 */
- 0x0000, /* R161 */
- 0x0000, /* R162 */
- 0x0000, /* R163 - Generic Comparator Control */
- 0x0000, /* R164 - Generic comparator 1 */
- 0x0000, /* R165 - Generic comparator 2 */
- 0x0000, /* R166 - Generic comparator 3 */
- 0x0000, /* R167 - Generic comparator 4 */
- 0xA00F, /* R168 - Battery Charger Control 1 */
- 0x0B06, /* R169 - Battery Charger Control 2 */
- 0x0000, /* R170 - Battery Charger Control 3 */
- 0x0000, /* R171 */
- 0x0000, /* R172 - Current Sink Driver A */
- 0x0000, /* R173 - CSA Flash control */
- 0x0000, /* R174 */
- 0x0000, /* R175 */
- 0x0000, /* R176 - DCDC/LDO requested */
- 0x032D, /* R177 - DCDC Active options */
- 0x0000, /* R178 - DCDC Sleep options */
- 0x0025, /* R179 - Power-check comparator */
- 0x000E, /* R180 - DCDC1 Control */
- 0x0C00, /* R181 - DCDC1 Timeouts */
- 0x1006, /* R182 - DCDC1 Low Power */
- 0x0018, /* R183 - DCDC2 Control */
- 0x0000, /* R184 - DCDC2 Timeouts */
- 0x0000, /* R185 */
- 0x0026, /* R186 - DCDC3 Control */
- 0x0400, /* R187 - DCDC3 Timeouts */
- 0x0006, /* R188 - DCDC3 Low Power */
- 0x0062, /* R189 - DCDC4 Control */
- 0x0800, /* R190 - DCDC4 Timeouts */
- 0x0006, /* R191 - DCDC4 Low Power */
- 0x0008, /* R192 */
- 0x0000, /* R193 */
- 0x0000, /* R194 */
- 0x000A, /* R195 */
- 0x1000, /* R196 */
- 0x0006, /* R197 */
- 0x0000, /* R198 */
- 0x0003, /* R199 - Limit Switch Control */
- 0x0006, /* R200 - LDO1 Control */
- 0x0000, /* R201 - LDO1 Timeouts */
- 0x001C, /* R202 - LDO1 Low Power */
- 0x0010, /* R203 - LDO2 Control */
- 0x0C00, /* R204 - LDO2 Timeouts */
- 0x001C, /* R205 - LDO2 Low Power */
- 0x001F, /* R206 - LDO3 Control */
- 0x0800, /* R207 - LDO3 Timeouts */
- 0x001C, /* R208 - LDO3 Low Power */
- 0x000A, /* R209 - LDO4 Control */
- 0x0800, /* R210 - LDO4 Timeouts */
- 0x001C, /* R211 - LDO4 Low Power */
- 0x0000, /* R212 */
- 0x0000, /* R213 */
- 0x0000, /* R214 */
- 0x0000, /* R215 - VCC_FAULT Masks */
- 0x001F, /* R216 - Main Bandgap Control */
- 0x0000, /* R217 - OSC Control */
- 0x9000, /* R218 - RTC Tick Control */
- 0x0000, /* R219 - Security1 */
- 0x4000, /* R220 */
- 0x0000, /* R221 */
- 0x0000, /* R222 */
- 0x0000, /* R223 */
- 0x0000, /* R224 - Signal overrides */
- 0x0000, /* R225 - DCDC/LDO status */
- 0x0000, /* R226 - Charger Overides/status */
- 0x0000, /* R227 - misc overrides */
- 0x0000, /* R228 - Supply overrides/status 1 */
- 0x0000, /* R229 - Supply overrides/status 2 */
- 0xE000, /* R230 - GPIO Pin Status */
- 0x0000, /* R231 - comparotor overrides */
- 0x0000, /* R232 */
- 0x0000, /* R233 - State Machine status */
- 0x1200, /* R234 - FLL Test 1 */
- 0x0000, /* R235 */
- 0x8000, /* R236 */
- 0x0000, /* R237 */
- 0x0000, /* R238 */
- 0x0000, /* R239 */
- 0x0003, /* R240 */
- 0x0000, /* R241 */
- 0x0000, /* R242 */
- 0x0004, /* R243 */
- 0x0300, /* R244 */
- 0x0000, /* R245 */
- 0x0200, /* R246 */
- 0x1000, /* R247 */
- 0x1000, /* R248 - DCDC1 Test Controls */
- 0x1000, /* R249 */
- 0x1000, /* R250 - DCDC3 Test Controls */
- 0x1000, /* R251 - DCDC4 Test Controls */
-};
-#endif
-
-#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_2
-
-#undef WM8350_HAVE_CONFIG_MODE
-#define WM8350_HAVE_CONFIG_MODE
-
-const u16 wm8351_mode2_defaults[] = {
- 0x6143, /* R0 - Reset/ID */
- 0x0000, /* R1 - ID */
- 0x0001, /* R2 - Revision */
- 0x1C02, /* R3 - System Control 1 */
- 0x0214, /* R4 - System Control 2 */
- 0x0000, /* R5 - System Hibernate */
- 0x8A00, /* R6 - Interface Control */
- 0x0000, /* R7 */
- 0x8000, /* R8 - Power mgmt (1) */
- 0x0000, /* R9 - Power mgmt (2) */
- 0x0000, /* R10 - Power mgmt (3) */
- 0x2000, /* R11 - Power mgmt (4) */
- 0x0E00, /* R12 - Power mgmt (5) */
- 0x0000, /* R13 - Power mgmt (6) */
- 0x0000, /* R14 - Power mgmt (7) */
- 0x0000, /* R15 */
- 0x0000, /* R16 - RTC Seconds/Minutes */
- 0x0100, /* R17 - RTC Hours/Day */
- 0x0101, /* R18 - RTC Date/Month */
- 0x1400, /* R19 - RTC Year */
- 0x0000, /* R20 - Alarm Seconds/Minutes */
- 0x0000, /* R21 - Alarm Hours/Day */
- 0x0000, /* R22 - Alarm Date/Month */
- 0x0320, /* R23 - RTC Time Control */
- 0x0000, /* R24 - System Interrupts */
- 0x0000, /* R25 - Interrupt Status 1 */
- 0x0000, /* R26 - Interrupt Status 2 */
- 0x0000, /* R27 */
- 0x0000, /* R28 - Under Voltage Interrupt status */
- 0x0000, /* R29 - Over Current Interrupt status */
- 0x0000, /* R30 - GPIO Interrupt Status */
- 0x0000, /* R31 - Comparator Interrupt Status */
- 0x3FFF, /* R32 - System Interrupts Mask */
- 0x0000, /* R33 - Interrupt Status 1 Mask */
- 0x0000, /* R34 - Interrupt Status 2 Mask */
- 0x0000, /* R35 */
- 0x0000, /* R36 - Under Voltage Interrupt status Mask */
- 0x0000, /* R37 - Over Current Interrupt status Mask */
- 0x0000, /* R38 - GPIO Interrupt Status Mask */
- 0x0000, /* R39 - Comparator Interrupt Status Mask */
- 0x0040, /* R40 - Clock Control 1 */
- 0x0000, /* R41 - Clock Control 2 */
- 0x3A00, /* R42 - FLL Control 1 */
- 0x7086, /* R43 - FLL Control 2 */
- 0xC226, /* R44 - FLL Control 3 */
- 0x0000, /* R45 - FLL Control 4 */
- 0x0000, /* R46 */
- 0x0000, /* R47 */
- 0x0000, /* R48 - DAC Control */
- 0x0000, /* R49 */
- 0x00C0, /* R50 - DAC Digital Volume L */
- 0x00C0, /* R51 - DAC Digital Volume R */
- 0x0000, /* R52 */
- 0x0040, /* R53 - DAC LR Rate */
- 0x0000, /* R54 - DAC Clock Control */
- 0x0000, /* R55 */
- 0x0000, /* R56 */
- 0x0000, /* R57 */
- 0x4000, /* R58 - DAC Mute */
- 0x0000, /* R59 - DAC Mute Volume */
- 0x0000, /* R60 - DAC Side */
- 0x0000, /* R61 */
- 0x0000, /* R62 */
- 0x0000, /* R63 */
- 0x8000, /* R64 - ADC Control */
- 0x0000, /* R65 */
- 0x00C0, /* R66 - ADC Digital Volume L */
- 0x00C0, /* R67 - ADC Digital Volume R */
- 0x0000, /* R68 - ADC Divider */
- 0x0000, /* R69 */
- 0x0040, /* R70 - ADC LR Rate */
- 0x0000, /* R71 */
- 0x0303, /* R72 - Input Control */
- 0x0000, /* R73 - IN3 Input Control */
- 0x0000, /* R74 - Mic Bias Control */
- 0x0000, /* R75 */
- 0x0000, /* R76 - Output Control */
- 0x0000, /* R77 - Jack Detect */
- 0x0000, /* R78 - Anti Pop Control */
- 0x0000, /* R79 */
- 0x0040, /* R80 - Left Input Volume */
- 0x0040, /* R81 - Right Input Volume */
- 0x0000, /* R82 */
- 0x0000, /* R83 */
- 0x0000, /* R84 */
- 0x0000, /* R85 */
- 0x0000, /* R86 */
- 0x0000, /* R87 */
- 0x0800, /* R88 - Left Mixer Control */
- 0x1000, /* R89 - Right Mixer Control */
- 0x0000, /* R90 */
- 0x0000, /* R91 */
- 0x0000, /* R92 - OUT3 Mixer Control */
- 0x0000, /* R93 - OUT4 Mixer Control */
- 0x0000, /* R94 */
- 0x0000, /* R95 */
- 0x0000, /* R96 - Output Left Mixer Volume */
- 0x0000, /* R97 - Output Right Mixer Volume */
- 0x0000, /* R98 - Input Mixer Volume L */
- 0x0000, /* R99 - Input Mixer Volume R */
- 0x0000, /* R100 - Input Mixer Volume */
- 0x0000, /* R101 */
- 0x0000, /* R102 */
- 0x0000, /* R103 */
- 0x00E4, /* R104 - OUT1L Volume */
- 0x00E4, /* R105 - OUT1R Volume */
- 0x00E4, /* R106 - OUT2L Volume */
- 0x02E4, /* R107 - OUT2R Volume */
- 0x0000, /* R108 */
- 0x0000, /* R109 */
- 0x0000, /* R110 */
- 0x0000, /* R111 - BEEP Volume */
- 0x0A00, /* R112 - AI Formating */
- 0x0000, /* R113 - ADC DAC COMP */
- 0x0020, /* R114 - AI ADC Control */
- 0x0020, /* R115 - AI DAC Control */
- 0x0000, /* R116 */
- 0x0000, /* R117 */
- 0x0000, /* R118 */
- 0x0000, /* R119 */
- 0x0000, /* R120 */
- 0x0000, /* R121 */
- 0x0000, /* R122 */
- 0x0000, /* R123 */
- 0x0000, /* R124 */
- 0x0000, /* R125 */
- 0x0000, /* R126 */
- 0x0000, /* R127 */
- 0x1FFF, /* R128 - GPIO Debounce */
- 0x0000, /* R129 - GPIO Pin pull up Control */
- 0x0110, /* R130 - GPIO Pull down Control */
- 0x0000, /* R131 - GPIO Interrupt Mode */
- 0x0000, /* R132 */
- 0x0000, /* R133 - GPIO Control */
- 0x09FA, /* R134 - GPIO Configuration (i/o) */
- 0x0DF6, /* R135 - GPIO Pin Polarity / Type */
- 0x0000, /* R136 */
- 0x0000, /* R137 */
- 0x0000, /* R138 */
- 0x0000, /* R139 */
- 0x1310, /* R140 - GPIO Function Select 1 */
- 0x0003, /* R141 - GPIO Function Select 2 */
- 0x2000, /* R142 - GPIO Function Select 3 */
- 0x0000, /* R143 - GPIO Function Select 4 */
- 0x0000, /* R144 - Digitiser Control (1) */
- 0x0002, /* R145 - Digitiser Control (2) */
- 0x0000, /* R146 */
- 0x0000, /* R147 */
- 0x0000, /* R148 */
- 0x0000, /* R149 */
- 0x0000, /* R150 */
- 0x0000, /* R151 */
- 0x7000, /* R152 - AUX1 Readback */
- 0x7000, /* R153 - AUX2 Readback */
- 0x7000, /* R154 - AUX3 Readback */
- 0x7000, /* R155 - AUX4 Readback */
- 0x0000, /* R156 - USB Voltage Readback */
- 0x0000, /* R157 - LINE Voltage Readback */
- 0x0000, /* R158 - BATT Voltage Readback */
- 0x0000, /* R159 - Chip Temp Readback */
- 0x0000, /* R160 */
- 0x0000, /* R161 */
- 0x0000, /* R162 */
- 0x0000, /* R163 - Generic Comparator Control */
- 0x0000, /* R164 - Generic comparator 1 */
- 0x0000, /* R165 - Generic comparator 2 */
- 0x0000, /* R166 - Generic comparator 3 */
- 0x0000, /* R167 - Generic comparator 4 */
- 0xA00F, /* R168 - Battery Charger Control 1 */
- 0x0B06, /* R169 - Battery Charger Control 2 */
- 0x0000, /* R170 - Battery Charger Control 3 */
- 0x0000, /* R171 */
- 0x0000, /* R172 - Current Sink Driver A */
- 0x0000, /* R173 - CSA Flash control */
- 0x0000, /* R174 */
- 0x0000, /* R175 */
- 0x0000, /* R176 - DCDC/LDO requested */
- 0x032D, /* R177 - DCDC Active options */
- 0x0000, /* R178 - DCDC Sleep options */
- 0x0025, /* R179 - Power-check comparator */
- 0x001A, /* R180 - DCDC1 Control */
- 0x0800, /* R181 - DCDC1 Timeouts */
- 0x1006, /* R182 - DCDC1 Low Power */
- 0x0018, /* R183 - DCDC2 Control */
- 0x0000, /* R184 - DCDC2 Timeouts */
- 0x0000, /* R185 */
- 0x0056, /* R186 - DCDC3 Control */
- 0x0400, /* R187 - DCDC3 Timeouts */
- 0x0006, /* R188 - DCDC3 Low Power */
- 0x0026, /* R189 - DCDC4 Control */
- 0x0C00, /* R190 - DCDC4 Timeouts */
- 0x0006, /* R191 - DCDC4 Low Power */
- 0x0008, /* R192 */
- 0x0000, /* R193 */
- 0x0000, /* R194 */
- 0x0026, /* R195 */
- 0x0C00, /* R196 */
- 0x0006, /* R197 */
- 0x0000, /* R198 */
- 0x0003, /* R199 - Limit Switch Control */
- 0x001C, /* R200 - LDO1 Control */
- 0x0400, /* R201 - LDO1 Timeouts */
- 0x001C, /* R202 - LDO1 Low Power */
- 0x0010, /* R203 - LDO2 Control */
- 0x0C00, /* R204 - LDO2 Timeouts */
- 0x001C, /* R205 - LDO2 Low Power */
- 0x0015, /* R206 - LDO3 Control */
- 0x0000, /* R207 - LDO3 Timeouts */
- 0x001C, /* R208 - LDO3 Low Power */
- 0x001A, /* R209 - LDO4 Control */
- 0x0000, /* R210 - LDO4 Timeouts */
- 0x001C, /* R211 - LDO4 Low Power */
- 0x0000, /* R212 */
- 0x0000, /* R213 */
- 0x0000, /* R214 */
- 0x0000, /* R215 - VCC_FAULT Masks */
- 0x001F, /* R216 - Main Bandgap Control */
- 0x0000, /* R217 - OSC Control */
- 0x9000, /* R218 - RTC Tick Control */
- 0x0000, /* R219 - Security1 */
- 0x4000, /* R220 */
- 0x0000, /* R221 */
- 0x0000, /* R222 */
- 0x0000, /* R223 */
- 0x0000, /* R224 - Signal overrides */
- 0x0000, /* R225 - DCDC/LDO status */
- 0x0000, /* R226 - Charger Overides/status */
- 0x0000, /* R227 - misc overrides */
- 0x0000, /* R228 - Supply overrides/status 1 */
- 0x0000, /* R229 - Supply overrides/status 2 */
- 0xE000, /* R230 - GPIO Pin Status */
- 0x0000, /* R231 - comparotor overrides */
- 0x0000, /* R232 */
- 0x0000, /* R233 - State Machine status */
- 0x1200, /* R234 - FLL Test 1 */
- 0x0000, /* R235 */
- 0x8000, /* R236 */
- 0x0000, /* R237 */
- 0x0000, /* R238 */
- 0x0000, /* R239 */
- 0x0003, /* R240 */
- 0x0000, /* R241 */
- 0x0000, /* R242 */
- 0x0004, /* R243 */
- 0x0300, /* R244 */
- 0x0000, /* R245 */
- 0x0200, /* R246 */
- 0x0000, /* R247 */
- 0x1000, /* R248 - DCDC1 Test Controls */
- 0x1000, /* R249 */
- 0x1000, /* R250 - DCDC3 Test Controls */
- 0x1000, /* R251 - DCDC4 Test Controls */
-};
-#endif
-
-#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_3
-
-#undef WM8350_HAVE_CONFIG_MODE
-#define WM8350_HAVE_CONFIG_MODE
-
-const u16 wm8351_mode3_defaults[] = {
- 0x6143, /* R0 - Reset/ID */
- 0x0000, /* R1 - ID */
- 0x0001, /* R2 - Revision */
- 0x1C02, /* R3 - System Control 1 */
- 0x0204, /* R4 - System Control 2 */
- 0x0000, /* R5 - System Hibernate */
- 0x8A00, /* R6 - Interface Control */
- 0x0000, /* R7 */
- 0x8000, /* R8 - Power mgmt (1) */
- 0x0000, /* R9 - Power mgmt (2) */
- 0x0000, /* R10 - Power mgmt (3) */
- 0x2000, /* R11 - Power mgmt (4) */
- 0x0E00, /* R12 - Power mgmt (5) */
- 0x0000, /* R13 - Power mgmt (6) */
- 0x0000, /* R14 - Power mgmt (7) */
- 0x0000, /* R15 */
- 0x0000, /* R16 - RTC Seconds/Minutes */
- 0x0100, /* R17 - RTC Hours/Day */
- 0x0101, /* R18 - RTC Date/Month */
- 0x1400, /* R19 - RTC Year */
- 0x0000, /* R20 - Alarm Seconds/Minutes */
- 0x0000, /* R21 - Alarm Hours/Day */
- 0x0000, /* R22 - Alarm Date/Month */
- 0x0320, /* R23 - RTC Time Control */
- 0x0000, /* R24 - System Interrupts */
- 0x0000, /* R25 - Interrupt Status 1 */
- 0x0000, /* R26 - Interrupt Status 2 */
- 0x0000, /* R27 */
- 0x0000, /* R28 - Under Voltage Interrupt status */
- 0x0000, /* R29 - Over Current Interrupt status */
- 0x0000, /* R30 - GPIO Interrupt Status */
- 0x0000, /* R31 - Comparator Interrupt Status */
- 0x3FFF, /* R32 - System Interrupts Mask */
- 0x0000, /* R33 - Interrupt Status 1 Mask */
- 0x0000, /* R34 - Interrupt Status 2 Mask */
- 0x0000, /* R35 */
- 0x0000, /* R36 - Under Voltage Interrupt status Mask */
- 0x0000, /* R37 - Over Current Interrupt status Mask */
- 0x0000, /* R38 - GPIO Interrupt Status Mask */
- 0x0000, /* R39 - Comparator Interrupt Status Mask */
- 0x0040, /* R40 - Clock Control 1 */
- 0x0000, /* R41 - Clock Control 2 */
- 0x3A00, /* R42 - FLL Control 1 */
- 0x7086, /* R43 - FLL Control 2 */
- 0xC226, /* R44 - FLL Control 3 */
- 0x0000, /* R45 - FLL Control 4 */
- 0x0000, /* R46 */
- 0x0000, /* R47 */
- 0x0000, /* R48 - DAC Control */
- 0x0000, /* R49 */
- 0x00C0, /* R50 - DAC Digital Volume L */
- 0x00C0, /* R51 - DAC Digital Volume R */
- 0x0000, /* R52 */
- 0x0040, /* R53 - DAC LR Rate */
- 0x0000, /* R54 - DAC Clock Control */
- 0x0000, /* R55 */
- 0x0000, /* R56 */
- 0x0000, /* R57 */
- 0x4000, /* R58 - DAC Mute */
- 0x0000, /* R59 - DAC Mute Volume */
- 0x0000, /* R60 - DAC Side */
- 0x0000, /* R61 */
- 0x0000, /* R62 */
- 0x0000, /* R63 */
- 0x8000, /* R64 - ADC Control */
- 0x0000, /* R65 */
- 0x00C0, /* R66 - ADC Digital Volume L */
- 0x00C0, /* R67 - ADC Digital Volume R */
- 0x0000, /* R68 - ADC Divider */
- 0x0000, /* R69 */
- 0x0040, /* R70 - ADC LR Rate */
- 0x0000, /* R71 */
- 0x0303, /* R72 - Input Control */
- 0x0000, /* R73 - IN3 Input Control */
- 0x0000, /* R74 - Mic Bias Control */
- 0x0000, /* R75 */
- 0x0000, /* R76 - Output Control */
- 0x0000, /* R77 - Jack Detect */
- 0x0000, /* R78 - Anti Pop Control */
- 0x0000, /* R79 */
- 0x0040, /* R80 - Left Input Volume */
- 0x0040, /* R81 - Right Input Volume */
- 0x0000, /* R82 */
- 0x0000, /* R83 */
- 0x0000, /* R84 */
- 0x0000, /* R85 */
- 0x0000, /* R86 */
- 0x0000, /* R87 */
- 0x0800, /* R88 - Left Mixer Control */
- 0x1000, /* R89 - Right Mixer Control */
- 0x0000, /* R90 */
- 0x0000, /* R91 */
- 0x0000, /* R92 - OUT3 Mixer Control */
- 0x0000, /* R93 - OUT4 Mixer Control */
- 0x0000, /* R94 */
- 0x0000, /* R95 */
- 0x0000, /* R96 - Output Left Mixer Volume */
- 0x0000, /* R97 - Output Right Mixer Volume */
- 0x0000, /* R98 - Input Mixer Volume L */
- 0x0000, /* R99 - Input Mixer Volume R */
- 0x0000, /* R100 - Input Mixer Volume */
- 0x0000, /* R101 */
- 0x0000, /* R102 */
- 0x0000, /* R103 */
- 0x00E4, /* R104 - OUT1L Volume */
- 0x00E4, /* R105 - OUT1R Volume */
- 0x00E4, /* R106 - OUT2L Volume */
- 0x02E4, /* R107 - OUT2R Volume */
- 0x0000, /* R108 */
- 0x0000, /* R109 */
- 0x0000, /* R110 */
- 0x0000, /* R111 - BEEP Volume */
- 0x0A00, /* R112 - AI Formating */
- 0x0000, /* R113 - ADC DAC COMP */
- 0x0020, /* R114 - AI ADC Control */
- 0x0020, /* R115 - AI DAC Control */
- 0x0000, /* R116 */
- 0x0000, /* R117 */
- 0x0000, /* R118 */
- 0x0000, /* R119 */
- 0x0000, /* R120 */
- 0x0000, /* R121 */
- 0x0000, /* R122 */
- 0x0000, /* R123 */
- 0x0000, /* R124 */
- 0x0000, /* R125 */
- 0x0000, /* R126 */
- 0x0000, /* R127 */
- 0x1FFF, /* R128 - GPIO Debounce */
- 0x0010, /* R129 - GPIO Pin pull up Control */
- 0x0000, /* R130 - GPIO Pull down Control */
- 0x0000, /* R131 - GPIO Interrupt Mode */
- 0x0000, /* R132 */
- 0x0000, /* R133 - GPIO Control */
- 0x0BFB, /* R134 - GPIO Configuration (i/o) */
- 0x0FFD, /* R135 - GPIO Pin Polarity / Type */
- 0x0000, /* R136 */
- 0x0000, /* R137 */
- 0x0000, /* R138 */
- 0x0000, /* R139 */
- 0x0310, /* R140 - GPIO Function Select 1 */
- 0x0001, /* R141 - GPIO Function Select 2 */
- 0x2300, /* R142 - GPIO Function Select 3 */
- 0x0003, /* R143 - GPIO Function Select 4 */
- 0x0000, /* R144 - Digitiser Control (1) */
- 0x0002, /* R145 - Digitiser Control (2) */
- 0x0000, /* R146 */
- 0x0000, /* R147 */
- 0x0000, /* R148 */
- 0x0000, /* R149 */
- 0x0000, /* R150 */
- 0x0000, /* R151 */
- 0x7000, /* R152 - AUX1 Readback */
- 0x7000, /* R153 - AUX2 Readback */
- 0x7000, /* R154 - AUX3 Readback */
- 0x7000, /* R155 - AUX4 Readback */
- 0x0000, /* R156 - USB Voltage Readback */
- 0x0000, /* R157 - LINE Voltage Readback */
- 0x0000, /* R158 - BATT Voltage Readback */
- 0x0000, /* R159 - Chip Temp Readback */
- 0x0000, /* R160 */
- 0x0000, /* R161 */
- 0x0000, /* R162 */
- 0x0000, /* R163 - Generic Comparator Control */
- 0x0000, /* R164 - Generic comparator 1 */
- 0x0000, /* R165 - Generic comparator 2 */
- 0x0000, /* R166 - Generic comparator 3 */
- 0x0000, /* R167 - Generic comparator 4 */
- 0xA00F, /* R168 - Battery Charger Control 1 */
- 0x0B06, /* R169 - Battery Charger Control 2 */
- 0x0000, /* R170 - Battery Charger Control 3 */
- 0x0000, /* R171 */
- 0x0000, /* R172 - Current Sink Driver A */
- 0x0000, /* R173 - CSA Flash control */
- 0x0000, /* R174 */
- 0x0000, /* R175 */
- 0x0000, /* R176 - DCDC/LDO requested */
- 0x032D, /* R177 - DCDC Active options */
- 0x0000, /* R178 - DCDC Sleep options */
- 0x0025, /* R179 - Power-check comparator */
- 0x000E, /* R180 - DCDC1 Control */
- 0x0400, /* R181 - DCDC1 Timeouts */
- 0x1006, /* R182 - DCDC1 Low Power */
- 0x0018, /* R183 - DCDC2 Control */
- 0x0000, /* R184 - DCDC2 Timeouts */
- 0x0000, /* R185 */
- 0x0026, /* R186 - DCDC3 Control */
- 0x0800, /* R187 - DCDC3 Timeouts */
- 0x0006, /* R188 - DCDC3 Low Power */
- 0x0062, /* R189 - DCDC4 Control */
- 0x1400, /* R190 - DCDC4 Timeouts */
- 0x0006, /* R191 - DCDC4 Low Power */
- 0x0008, /* R192 */
- 0x0000, /* R193 */
- 0x0000, /* R194 */
- 0x0026, /* R195 */
- 0x0400, /* R196 */
- 0x0006, /* R197 */
- 0x0000, /* R198 */
- 0x0003, /* R199 - Limit Switch Control */
- 0x0006, /* R200 - LDO1 Control */
- 0x0C00, /* R201 - LDO1 Timeouts */
- 0x001C, /* R202 - LDO1 Low Power */
- 0x0016, /* R203 - LDO2 Control */
- 0x0000, /* R204 - LDO2 Timeouts */
- 0x001C, /* R205 - LDO2 Low Power */
- 0x0019, /* R206 - LDO3 Control */
- 0x0000, /* R207 - LDO3 Timeouts */
- 0x001C, /* R208 - LDO3 Low Power */
- 0x001A, /* R209 - LDO4 Control */
- 0x1000, /* R210 - LDO4 Timeouts */
- 0x001C, /* R211 - LDO4 Low Power */
- 0x0000, /* R212 */
- 0x0000, /* R213 */
- 0x0000, /* R214 */
- 0x0000, /* R215 - VCC_FAULT Masks */
- 0x001F, /* R216 - Main Bandgap Control */
- 0x0000, /* R217 - OSC Control */
- 0x9000, /* R218 - RTC Tick Control */
- 0x0000, /* R219 - Security1 */
- 0x4000, /* R220 */
- 0x0000, /* R221 */
- 0x0000, /* R222 */
- 0x0000, /* R223 */
- 0x0000, /* R224 - Signal overrides */
- 0x0000, /* R225 - DCDC/LDO status */
- 0x0000, /* R226 - Charger Overides/status */
- 0x0000, /* R227 - misc overrides */
- 0x0000, /* R228 - Supply overrides/status 1 */
- 0x0000, /* R229 - Supply overrides/status 2 */
- 0xE000, /* R230 - GPIO Pin Status */
- 0x0000, /* R231 - comparotor overrides */
- 0x0000, /* R232 */
- 0x0000, /* R233 - State Machine status */
- 0x1200, /* R234 - FLL Test 1 */
- 0x0000, /* R235 */
- 0x8000, /* R236 */
- 0x0000, /* R237 */
- 0x0000, /* R238 */
- 0x0000, /* R239 */
- 0x0003, /* R240 */
- 0x0000, /* R241 */
- 0x0000, /* R242 */
- 0x0004, /* R243 */
- 0x0300, /* R244 */
- 0x0000, /* R245 */
- 0x0200, /* R246 */
- 0x0000, /* R247 */
- 0x1000, /* R248 - DCDC1 Test Controls */
- 0x1000, /* R249 */
- 0x1000, /* R250 - DCDC3 Test Controls */
- 0x1000, /* R251 - DCDC4 Test Controls */
-};
-#endif
-
-#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_0
-
-#undef WM8350_HAVE_CONFIG_MODE
-#define WM8350_HAVE_CONFIG_MODE
-
-const u16 wm8352_mode0_defaults[] = {
- 0x6143, /* R0 - Reset/ID */
- 0x0000, /* R1 - ID */
- 0x0002, /* R2 - Revision */
- 0x1C02, /* R3 - System Control 1 */
- 0x0004, /* R4 - System Control 2 */
- 0x0000, /* R5 - System Hibernate */
- 0x8A00, /* R6 - Interface Control */
- 0x0000, /* R7 */
- 0x8000, /* R8 - Power mgmt (1) */
- 0x0000, /* R9 - Power mgmt (2) */
- 0x0000, /* R10 - Power mgmt (3) */
- 0x2000, /* R11 - Power mgmt (4) */
- 0x0E00, /* R12 - Power mgmt (5) */
- 0x0000, /* R13 - Power mgmt (6) */
- 0x0000, /* R14 - Power mgmt (7) */
- 0x0000, /* R15 */
- 0x0000, /* R16 - RTC Seconds/Minutes */
- 0x0100, /* R17 - RTC Hours/Day */
- 0x0101, /* R18 - RTC Date/Month */
- 0x1400, /* R19 - RTC Year */
- 0x0000, /* R20 - Alarm Seconds/Minutes */
- 0x0000, /* R21 - Alarm Hours/Day */
- 0x0000, /* R22 - Alarm Date/Month */
- 0x0320, /* R23 - RTC Time Control */
- 0x0000, /* R24 - System Interrupts */
- 0x0000, /* R25 - Interrupt Status 1 */
- 0x0000, /* R26 - Interrupt Status 2 */
- 0x0000, /* R27 */
- 0x0000, /* R28 - Under Voltage Interrupt status */
- 0x0000, /* R29 - Over Current Interrupt status */
- 0x0000, /* R30 - GPIO Interrupt Status */
- 0x0000, /* R31 - Comparator Interrupt Status */
- 0x3FFF, /* R32 - System Interrupts Mask */
- 0x0000, /* R33 - Interrupt Status 1 Mask */
- 0x0000, /* R34 - Interrupt Status 2 Mask */
- 0x0000, /* R35 */
- 0x0000, /* R36 - Under Voltage Interrupt status Mask */
- 0x0000, /* R37 - Over Current Interrupt status Mask */
- 0x0000, /* R38 - GPIO Interrupt Status Mask */
- 0x0000, /* R39 - Comparator Interrupt Status Mask */
- 0x0040, /* R40 - Clock Control 1 */
- 0x0000, /* R41 - Clock Control 2 */
- 0x3A00, /* R42 - FLL Control 1 */
- 0x7086, /* R43 - FLL Control 2 */
- 0xC226, /* R44 - FLL Control 3 */
- 0x0000, /* R45 - FLL Control 4 */
- 0x0000, /* R46 */
- 0x0000, /* R47 */
- 0x0000, /* R48 - DAC Control */
- 0x0000, /* R49 */
- 0x00C0, /* R50 - DAC Digital Volume L */
- 0x00C0, /* R51 - DAC Digital Volume R */
- 0x0000, /* R52 */
- 0x0040, /* R53 - DAC LR Rate */
- 0x0000, /* R54 - DAC Clock Control */
- 0x0000, /* R55 */
- 0x0000, /* R56 */
- 0x0000, /* R57 */
- 0x4000, /* R58 - DAC Mute */
- 0x0000, /* R59 - DAC Mute Volume */
- 0x0000, /* R60 - DAC Side */
- 0x0000, /* R61 */
- 0x0000, /* R62 */
- 0x0000, /* R63 */
- 0x8000, /* R64 - ADC Control */
- 0x0000, /* R65 */
- 0x00C0, /* R66 - ADC Digital Volume L */
- 0x00C0, /* R67 - ADC Digital Volume R */
- 0x0000, /* R68 - ADC Divider */
- 0x0000, /* R69 */
- 0x0040, /* R70 - ADC LR Rate */
- 0x0000, /* R71 */
- 0x0303, /* R72 - Input Control */
- 0x0000, /* R73 - IN3 Input Control */
- 0x0000, /* R74 - Mic Bias Control */
- 0x0000, /* R75 */
- 0x0000, /* R76 - Output Control */
- 0x0000, /* R77 - Jack Detect */
- 0x0000, /* R78 - Anti Pop Control */
- 0x0000, /* R79 */
- 0x0040, /* R80 - Left Input Volume */
- 0x0040, /* R81 - Right Input Volume */
- 0x0000, /* R82 */
- 0x0000, /* R83 */
- 0x0000, /* R84 */
- 0x0000, /* R85 */
- 0x0000, /* R86 */
- 0x0000, /* R87 */
- 0x0800, /* R88 - Left Mixer Control */
- 0x1000, /* R89 - Right Mixer Control */
- 0x0000, /* R90 */
- 0x0000, /* R91 */
- 0x0000, /* R92 - OUT3 Mixer Control */
- 0x0000, /* R93 - OUT4 Mixer Control */
- 0x0000, /* R94 */
- 0x0000, /* R95 */
- 0x0000, /* R96 - Output Left Mixer Volume */
- 0x0000, /* R97 - Output Right Mixer Volume */
- 0x0000, /* R98 - Input Mixer Volume L */
- 0x0000, /* R99 - Input Mixer Volume R */
- 0x0000, /* R100 - Input Mixer Volume */
- 0x0000, /* R101 */
- 0x0000, /* R102 */
- 0x0000, /* R103 */
- 0x00E4, /* R104 - OUT1L Volume */
- 0x00E4, /* R105 - OUT1R Volume */
- 0x00E4, /* R106 - OUT2L Volume */
- 0x02E4, /* R107 - OUT2R Volume */
- 0x0000, /* R108 */
- 0x0000, /* R109 */
- 0x0000, /* R110 */
- 0x0000, /* R111 - BEEP Volume */
- 0x0A00, /* R112 - AI Formating */
- 0x0000, /* R113 - ADC DAC COMP */
- 0x0020, /* R114 - AI ADC Control */
- 0x0020, /* R115 - AI DAC Control */
- 0x0000, /* R116 */
- 0x0000, /* R117 */
- 0x0000, /* R118 */
- 0x0000, /* R119 */
- 0x0000, /* R120 */
- 0x0000, /* R121 */
- 0x0000, /* R122 */
- 0x0000, /* R123 */
- 0x0000, /* R124 */
- 0x0000, /* R125 */
- 0x0000, /* R126 */
- 0x0000, /* R127 */
- 0x1FFF, /* R128 - GPIO Debounce */
- 0x0000, /* R129 - GPIO Pin pull up Control */
- 0x0000, /* R130 - GPIO Pull down Control */
- 0x0000, /* R131 - GPIO Interrupt Mode */
- 0x0000, /* R132 */
- 0x0000, /* R133 - GPIO Control */
- 0x0FFC, /* R134 - GPIO Configuration (i/o) */
- 0x0FFC, /* R135 - GPIO Pin Polarity / Type */
- 0x0000, /* R136 */
- 0x0000, /* R137 */
- 0x0000, /* R138 */
- 0x0000, /* R139 */
- 0x0013, /* R140 - GPIO Function Select 1 */
- 0x0000, /* R141 - GPIO Function Select 2 */
- 0x0000, /* R142 - GPIO Function Select 3 */
- 0x0003, /* R143 - GPIO Function Select 4 */
- 0x0000, /* R144 - Digitiser Control (1) */
- 0x0002, /* R145 - Digitiser Control (2) */
- 0x0000, /* R146 */
- 0x0000, /* R147 */
- 0x0000, /* R148 */
- 0x0000, /* R149 */
- 0x0000, /* R150 */
- 0x0000, /* R151 */
- 0x7000, /* R152 - AUX1 Readback */
- 0x7000, /* R153 - AUX2 Readback */
- 0x7000, /* R154 - AUX3 Readback */
- 0x7000, /* R155 - AUX4 Readback */
- 0x0000, /* R156 - USB Voltage Readback */
- 0x0000, /* R157 - LINE Voltage Readback */
- 0x0000, /* R158 - BATT Voltage Readback */
- 0x0000, /* R159 - Chip Temp Readback */
- 0x0000, /* R160 */
- 0x0000, /* R161 */
- 0x0000, /* R162 */
- 0x0000, /* R163 - Generic Comparator Control */
- 0x0000, /* R164 - Generic comparator 1 */
- 0x0000, /* R165 - Generic comparator 2 */
- 0x0000, /* R166 - Generic comparator 3 */
- 0x0000, /* R167 - Generic comparator 4 */
- 0xA00F, /* R168 - Battery Charger Control 1 */
- 0x0B06, /* R169 - Battery Charger Control 2 */
- 0x0000, /* R170 - Battery Charger Control 3 */
- 0x0000, /* R171 */
- 0x0000, /* R172 - Current Sink Driver A */
- 0x0000, /* R173 - CSA Flash control */
- 0x0000, /* R174 - Current Sink Driver B */
- 0x0000, /* R175 - CSB Flash control */
- 0x0000, /* R176 - DCDC/LDO requested */
- 0x032D, /* R177 - DCDC Active options */
- 0x0000, /* R178 - DCDC Sleep options */
- 0x0025, /* R179 - Power-check comparator */
- 0x000E, /* R180 - DCDC1 Control */
- 0x0000, /* R181 - DCDC1 Timeouts */
- 0x1006, /* R182 - DCDC1 Low Power */
- 0x0018, /* R183 - DCDC2 Control */
- 0x0000, /* R184 - DCDC2 Timeouts */
- 0x0000, /* R185 */
- 0x0000, /* R186 - DCDC3 Control */
- 0x0000, /* R187 - DCDC3 Timeouts */
- 0x0006, /* R188 - DCDC3 Low Power */
- 0x0000, /* R189 - DCDC4 Control */
- 0x0000, /* R190 - DCDC4 Timeouts */
- 0x0006, /* R191 - DCDC4 Low Power */
- 0x0008, /* R192 - DCDC5 Control */
- 0x0000, /* R193 - DCDC5 Timeouts */
- 0x0000, /* R194 */
- 0x0000, /* R195 - DCDC6 Control */
- 0x0000, /* R196 - DCDC6 Timeouts */
- 0x0006, /* R197 - DCDC6 Low Power */
- 0x0000, /* R198 */
- 0x0003, /* R199 - Limit Switch Control */
- 0x001C, /* R200 - LDO1 Control */
- 0x0000, /* R201 - LDO1 Timeouts */
- 0x001C, /* R202 - LDO1 Low Power */
- 0x001B, /* R203 - LDO2 Control */
- 0x0000, /* R204 - LDO2 Timeouts */
- 0x001C, /* R205 - LDO2 Low Power */
- 0x001B, /* R206 - LDO3 Control */
- 0x0000, /* R207 - LDO3 Timeouts */
- 0x001C, /* R208 - LDO3 Low Power */
- 0x001B, /* R209 - LDO4 Control */
- 0x0000, /* R210 - LDO4 Timeouts */
- 0x001C, /* R211 - LDO4 Low Power */
- 0x0000, /* R212 */
- 0x0000, /* R213 */
- 0x0000, /* R214 */
- 0x0000, /* R215 - VCC_FAULT Masks */
- 0x001F, /* R216 - Main Bandgap Control */
- 0x0000, /* R217 - OSC Control */
- 0x9000, /* R218 - RTC Tick Control */
- 0x0000, /* R219 - Security1 */
- 0x4000, /* R220 */
- 0x0000, /* R221 */
- 0x0000, /* R222 */
- 0x0000, /* R223 */
- 0x0000, /* R224 - Signal overrides */
- 0x0000, /* R225 - DCDC/LDO status */
- 0x0000, /* R226 - Charger Overides/status */
- 0x0000, /* R227 - misc overrides */
- 0x0000, /* R228 - Supply overrides/status 1 */
- 0x0000, /* R229 - Supply overrides/status 2 */
- 0xE000, /* R230 - GPIO Pin Status */
- 0x0000, /* R231 - comparotor overrides */
- 0x0000, /* R232 */
- 0x0000, /* R233 - State Machine status */
- 0x1200, /* R234 */
- 0x0000, /* R235 */
- 0x8000, /* R236 */
- 0x0000, /* R237 */
- 0x0000, /* R238 */
- 0x0000, /* R239 */
- 0x0003, /* R240 */
- 0x0000, /* R241 */
- 0x0000, /* R242 */
- 0x0004, /* R243 */
- 0x0300, /* R244 */
- 0x0000, /* R245 */
- 0x0200, /* R246 */
- 0x0000, /* R247 */
- 0x1000, /* R248 - DCDC1 Test Controls */
- 0x5000, /* R249 */
- 0x1000, /* R250 - DCDC3 Test Controls */
- 0x1000, /* R251 - DCDC4 Test Controls */
- 0x5100, /* R252 */
- 0x1000, /* R253 - DCDC6 Test Controls */
-};
-#endif
-
-#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_1
-
-#undef WM8350_HAVE_CONFIG_MODE
-#define WM8350_HAVE_CONFIG_MODE
-
-const u16 wm8352_mode1_defaults[] = {
- 0x6143, /* R0 - Reset/ID */
- 0x0000, /* R1 - ID */
- 0x0002, /* R2 - Revision */
- 0x1C02, /* R3 - System Control 1 */
- 0x0204, /* R4 - System Control 2 */
- 0x0000, /* R5 - System Hibernate */
- 0x8A00, /* R6 - Interface Control */
- 0x0000, /* R7 */
- 0x8000, /* R8 - Power mgmt (1) */
- 0x0000, /* R9 - Power mgmt (2) */
- 0x0000, /* R10 - Power mgmt (3) */
- 0x2000, /* R11 - Power mgmt (4) */
- 0x0E00, /* R12 - Power mgmt (5) */
- 0x0000, /* R13 - Power mgmt (6) */
- 0x0000, /* R14 - Power mgmt (7) */
- 0x0000, /* R15 */
- 0x0000, /* R16 - RTC Seconds/Minutes */
- 0x0100, /* R17 - RTC Hours/Day */
- 0x0101, /* R18 - RTC Date/Month */
- 0x1400, /* R19 - RTC Year */
- 0x0000, /* R20 - Alarm Seconds/Minutes */
- 0x0000, /* R21 - Alarm Hours/Day */
- 0x0000, /* R22 - Alarm Date/Month */
- 0x0320, /* R23 - RTC Time Control */
- 0x0000, /* R24 - System Interrupts */
- 0x0000, /* R25 - Interrupt Status 1 */
- 0x0000, /* R26 - Interrupt Status 2 */
- 0x0000, /* R27 */
- 0x0000, /* R28 - Under Voltage Interrupt status */
- 0x0000, /* R29 - Over Current Interrupt status */
- 0x0000, /* R30 - GPIO Interrupt Status */
- 0x0000, /* R31 - Comparator Interrupt Status */
- 0x3FFF, /* R32 - System Interrupts Mask */
- 0x0000, /* R33 - Interrupt Status 1 Mask */
- 0x0000, /* R34 - Interrupt Status 2 Mask */
- 0x0000, /* R35 */
- 0x0000, /* R36 - Under Voltage Interrupt status Mask */
- 0x0000, /* R37 - Over Current Interrupt status Mask */
- 0x0000, /* R38 - GPIO Interrupt Status Mask */
- 0x0000, /* R39 - Comparator Interrupt Status Mask */
- 0x0040, /* R40 - Clock Control 1 */
- 0x0000, /* R41 - Clock Control 2 */
- 0x3A00, /* R42 - FLL Control 1 */
- 0x7086, /* R43 - FLL Control 2 */
- 0xC226, /* R44 - FLL Control 3 */
- 0x0000, /* R45 - FLL Control 4 */
- 0x0000, /* R46 */
- 0x0000, /* R47 */
- 0x0000, /* R48 - DAC Control */
- 0x0000, /* R49 */
- 0x00C0, /* R50 - DAC Digital Volume L */
- 0x00C0, /* R51 - DAC Digital Volume R */
- 0x0000, /* R52 */
- 0x0040, /* R53 - DAC LR Rate */
- 0x0000, /* R54 - DAC Clock Control */
- 0x0000, /* R55 */
- 0x0000, /* R56 */
- 0x0000, /* R57 */
- 0x4000, /* R58 - DAC Mute */
- 0x0000, /* R59 - DAC Mute Volume */
- 0x0000, /* R60 - DAC Side */
- 0x0000, /* R61 */
- 0x0000, /* R62 */
- 0x0000, /* R63 */
- 0x8000, /* R64 - ADC Control */
- 0x0000, /* R65 */
- 0x00C0, /* R66 - ADC Digital Volume L */
- 0x00C0, /* R67 - ADC Digital Volume R */
- 0x0000, /* R68 - ADC Divider */
- 0x0000, /* R69 */
- 0x0040, /* R70 - ADC LR Rate */
- 0x0000, /* R71 */
- 0x0303, /* R72 - Input Control */
- 0x0000, /* R73 - IN3 Input Control */
- 0x0000, /* R74 - Mic Bias Control */
- 0x0000, /* R75 */
- 0x0000, /* R76 - Output Control */
- 0x0000, /* R77 - Jack Detect */
- 0x0000, /* R78 - Anti Pop Control */
- 0x0000, /* R79 */
- 0x0040, /* R80 - Left Input Volume */
- 0x0040, /* R81 - Right Input Volume */
- 0x0000, /* R82 */
- 0x0000, /* R83 */
- 0x0000, /* R84 */
- 0x0000, /* R85 */
- 0x0000, /* R86 */
- 0x0000, /* R87 */
- 0x0800, /* R88 - Left Mixer Control */
- 0x1000, /* R89 - Right Mixer Control */
- 0x0000, /* R90 */
- 0x0000, /* R91 */
- 0x0000, /* R92 - OUT3 Mixer Control */
- 0x0000, /* R93 - OUT4 Mixer Control */
- 0x0000, /* R94 */
- 0x0000, /* R95 */
- 0x0000, /* R96 - Output Left Mixer Volume */
- 0x0000, /* R97 - Output Right Mixer Volume */
- 0x0000, /* R98 - Input Mixer Volume L */
- 0x0000, /* R99 - Input Mixer Volume R */
- 0x0000, /* R100 - Input Mixer Volume */
- 0x0000, /* R101 */
- 0x0000, /* R102 */
- 0x0000, /* R103 */
- 0x00E4, /* R104 - OUT1L Volume */
- 0x00E4, /* R105 - OUT1R Volume */
- 0x00E4, /* R106 - OUT2L Volume */
- 0x02E4, /* R107 - OUT2R Volume */
- 0x0000, /* R108 */
- 0x0000, /* R109 */
- 0x0000, /* R110 */
- 0x0000, /* R111 - BEEP Volume */
- 0x0A00, /* R112 - AI Formating */
- 0x0000, /* R113 - ADC DAC COMP */
- 0x0020, /* R114 - AI ADC Control */
- 0x0020, /* R115 - AI DAC Control */
- 0x0000, /* R116 */
- 0x0000, /* R117 */
- 0x0000, /* R118 */
- 0x0000, /* R119 */
- 0x0000, /* R120 */
- 0x0000, /* R121 */
- 0x0000, /* R122 */
- 0x0000, /* R123 */
- 0x0000, /* R124 */
- 0x0000, /* R125 */
- 0x0000, /* R126 */
- 0x0000, /* R127 */
- 0x1FFF, /* R128 - GPIO Debounce */
- 0x0000, /* R129 - GPIO Pin pull up Control */
- 0x0000, /* R130 - GPIO Pull down Control */
- 0x0000, /* R131 - GPIO Interrupt Mode */
- 0x0000, /* R132 */
- 0x0000, /* R133 - GPIO Control */
- 0x0BFB, /* R134 - GPIO Configuration (i/o) */
- 0x0FFF, /* R135 - GPIO Pin Polarity / Type */
- 0x0000, /* R136 */
- 0x0000, /* R137 */
- 0x0000, /* R138 */
- 0x0000, /* R139 */
- 0x0300, /* R140 - GPIO Function Select 1 */
- 0x0000, /* R141 - GPIO Function Select 2 */
- 0x2300, /* R142 - GPIO Function Select 3 */
- 0x0003, /* R143 - GPIO Function Select 4 */
- 0x0000, /* R144 - Digitiser Control (1) */
- 0x0002, /* R145 - Digitiser Control (2) */
- 0x0000, /* R146 */
- 0x0000, /* R147 */
- 0x0000, /* R148 */
- 0x0000, /* R149 */
- 0x0000, /* R150 */
- 0x0000, /* R151 */
- 0x7000, /* R152 - AUX1 Readback */
- 0x7000, /* R153 - AUX2 Readback */
- 0x7000, /* R154 - AUX3 Readback */
- 0x7000, /* R155 - AUX4 Readback */
- 0x0000, /* R156 - USB Voltage Readback */
- 0x0000, /* R157 - LINE Voltage Readback */
- 0x0000, /* R158 - BATT Voltage Readback */
- 0x0000, /* R159 - Chip Temp Readback */
- 0x0000, /* R160 */
- 0x0000, /* R161 */
- 0x0000, /* R162 */
- 0x0000, /* R163 - Generic Comparator Control */
- 0x0000, /* R164 - Generic comparator 1 */
- 0x0000, /* R165 - Generic comparator 2 */
- 0x0000, /* R166 - Generic comparator 3 */
- 0x0000, /* R167 - Generic comparator 4 */
- 0xA00F, /* R168 - Battery Charger Control 1 */
- 0x0B06, /* R169 - Battery Charger Control 2 */
- 0x0000, /* R170 - Battery Charger Control 3 */
- 0x0000, /* R171 */
- 0x0000, /* R172 - Current Sink Driver A */
- 0x0000, /* R173 - CSA Flash control */
- 0x0000, /* R174 - Current Sink Driver B */
- 0x0000, /* R175 - CSB Flash control */
- 0x0000, /* R176 - DCDC/LDO requested */
- 0x032D, /* R177 - DCDC Active options */
- 0x0000, /* R178 - DCDC Sleep options */
- 0x0025, /* R179 - Power-check comparator */
- 0x0062, /* R180 - DCDC1 Control */
- 0x0400, /* R181 - DCDC1 Timeouts */
- 0x1006, /* R182 - DCDC1 Low Power */
- 0x0018, /* R183 - DCDC2 Control */
- 0x0000, /* R184 - DCDC2 Timeouts */
- 0x0000, /* R185 */
- 0x0006, /* R186 - DCDC3 Control */
- 0x0800, /* R187 - DCDC3 Timeouts */
- 0x0006, /* R188 - DCDC3 Low Power */
- 0x0006, /* R189 - DCDC4 Control */
- 0x0C00, /* R190 - DCDC4 Timeouts */
- 0x0006, /* R191 - DCDC4 Low Power */
- 0x0008, /* R192 - DCDC5 Control */
- 0x0000, /* R193 - DCDC5 Timeouts */
- 0x0000, /* R194 */
- 0x0026, /* R195 - DCDC6 Control */
- 0x1000, /* R196 - DCDC6 Timeouts */
- 0x0006, /* R197 - DCDC6 Low Power */
- 0x0000, /* R198 */
- 0x0003, /* R199 - Limit Switch Control */
- 0x0002, /* R200 - LDO1 Control */
- 0x0000, /* R201 - LDO1 Timeouts */
- 0x001C, /* R202 - LDO1 Low Power */
- 0x001A, /* R203 - LDO2 Control */
- 0x0000, /* R204 - LDO2 Timeouts */
- 0x001C, /* R205 - LDO2 Low Power */
- 0x001F, /* R206 - LDO3 Control */
- 0x0000, /* R207 - LDO3 Timeouts */
- 0x001C, /* R208 - LDO3 Low Power */
- 0x001F, /* R209 - LDO4 Control */
- 0x0000, /* R210 - LDO4 Timeouts */
- 0x001C, /* R211 - LDO4 Low Power */
- 0x0000, /* R212 */
- 0x0000, /* R213 */
- 0x0000, /* R214 */
- 0x0000, /* R215 - VCC_FAULT Masks */
- 0x001F, /* R216 - Main Bandgap Control */
- 0x0000, /* R217 - OSC Control */
- 0x9000, /* R218 - RTC Tick Control */
- 0x0000, /* R219 - Security1 */
- 0x4000, /* R220 */
- 0x0000, /* R221 */
- 0x0000, /* R222 */
- 0x0000, /* R223 */
- 0x0000, /* R224 - Signal overrides */
- 0x0000, /* R225 - DCDC/LDO status */
- 0x0000, /* R226 - Charger Overides/status */
- 0x0000, /* R227 - misc overrides */
- 0x0000, /* R228 - Supply overrides/status 1 */
- 0x0000, /* R229 - Supply overrides/status 2 */
- 0xE000, /* R230 - GPIO Pin Status */
- 0x0000, /* R231 - comparotor overrides */
- 0x0000, /* R232 */
- 0x0000, /* R233 - State Machine status */
- 0x1200, /* R234 */
- 0x0000, /* R235 */
- 0x8000, /* R236 */
- 0x0000, /* R237 */
- 0x0000, /* R238 */
- 0x0000, /* R239 */
- 0x0003, /* R240 */
- 0x0000, /* R241 */
- 0x0000, /* R242 */
- 0x0004, /* R243 */
- 0x0300, /* R244 */
- 0x0000, /* R245 */
- 0x0200, /* R246 */
- 0x0000, /* R247 */
- 0x1000, /* R248 - DCDC1 Test Controls */
- 0x5000, /* R249 */
- 0x1000, /* R250 - DCDC3 Test Controls */
- 0x1000, /* R251 - DCDC4 Test Controls */
- 0x5100, /* R252 */
- 0x1000, /* R253 - DCDC6 Test Controls */
-};
-#endif
-
-#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_2
-
-#undef WM8350_HAVE_CONFIG_MODE
-#define WM8350_HAVE_CONFIG_MODE
-
-const u16 wm8352_mode2_defaults[] = {
- 0x6143, /* R0 - Reset/ID */
- 0x0000, /* R1 - ID */
- 0x0002, /* R2 - Revision */
- 0x1C02, /* R3 - System Control 1 */
- 0x0204, /* R4 - System Control 2 */
- 0x0000, /* R5 - System Hibernate */
- 0x8A00, /* R6 - Interface Control */
- 0x0000, /* R7 */
- 0x8000, /* R8 - Power mgmt (1) */
- 0x0000, /* R9 - Power mgmt (2) */
- 0x0000, /* R10 - Power mgmt (3) */
- 0x2000, /* R11 - Power mgmt (4) */
- 0x0E00, /* R12 - Power mgmt (5) */
- 0x0000, /* R13 - Power mgmt (6) */
- 0x0000, /* R14 - Power mgmt (7) */
- 0x0000, /* R15 */
- 0x0000, /* R16 - RTC Seconds/Minutes */
- 0x0100, /* R17 - RTC Hours/Day */
- 0x0101, /* R18 - RTC Date/Month */
- 0x1400, /* R19 - RTC Year */
- 0x0000, /* R20 - Alarm Seconds/Minutes */
- 0x0000, /* R21 - Alarm Hours/Day */
- 0x0000, /* R22 - Alarm Date/Month */
- 0x0320, /* R23 - RTC Time Control */
- 0x0000, /* R24 - System Interrupts */
- 0x0000, /* R25 - Interrupt Status 1 */
- 0x0000, /* R26 - Interrupt Status 2 */
- 0x0000, /* R27 */
- 0x0000, /* R28 - Under Voltage Interrupt status */
- 0x0000, /* R29 - Over Current Interrupt status */
- 0x0000, /* R30 - GPIO Interrupt Status */
- 0x0000, /* R31 - Comparator Interrupt Status */
- 0x3FFF, /* R32 - System Interrupts Mask */
- 0x0000, /* R33 - Interrupt Status 1 Mask */
- 0x0000, /* R34 - Interrupt Status 2 Mask */
- 0x0000, /* R35 */
- 0x0000, /* R36 - Under Voltage Interrupt status Mask */
- 0x0000, /* R37 - Over Current Interrupt status Mask */
- 0x0000, /* R38 - GPIO Interrupt Status Mask */
- 0x0000, /* R39 - Comparator Interrupt Status Mask */
- 0x0040, /* R40 - Clock Control 1 */
- 0x0000, /* R41 - Clock Control 2 */
- 0x3A00, /* R42 - FLL Control 1 */
- 0x7086, /* R43 - FLL Control 2 */
- 0xC226, /* R44 - FLL Control 3 */
- 0x0000, /* R45 - FLL Control 4 */
- 0x0000, /* R46 */
- 0x0000, /* R47 */
- 0x0000, /* R48 - DAC Control */
- 0x0000, /* R49 */
- 0x00C0, /* R50 - DAC Digital Volume L */
- 0x00C0, /* R51 - DAC Digital Volume R */
- 0x0000, /* R52 */
- 0x0040, /* R53 - DAC LR Rate */
- 0x0000, /* R54 - DAC Clock Control */
- 0x0000, /* R55 */
- 0x0000, /* R56 */
- 0x0000, /* R57 */
- 0x4000, /* R58 - DAC Mute */
- 0x0000, /* R59 - DAC Mute Volume */
- 0x0000, /* R60 - DAC Side */
- 0x0000, /* R61 */
- 0x0000, /* R62 */
- 0x0000, /* R63 */
- 0x8000, /* R64 - ADC Control */
- 0x0000, /* R65 */
- 0x00C0, /* R66 - ADC Digital Volume L */
- 0x00C0, /* R67 - ADC Digital Volume R */
- 0x0000, /* R68 - ADC Divider */
- 0x0000, /* R69 */
- 0x0040, /* R70 - ADC LR Rate */
- 0x0000, /* R71 */
- 0x0303, /* R72 - Input Control */
- 0x0000, /* R73 - IN3 Input Control */
- 0x0000, /* R74 - Mic Bias Control */
- 0x0000, /* R75 */
- 0x0000, /* R76 - Output Control */
- 0x0000, /* R77 - Jack Detect */
- 0x0000, /* R78 - Anti Pop Control */
- 0x0000, /* R79 */
- 0x0040, /* R80 - Left Input Volume */
- 0x0040, /* R81 - Right Input Volume */
- 0x0000, /* R82 */
- 0x0000, /* R83 */
- 0x0000, /* R84 */
- 0x0000, /* R85 */
- 0x0000, /* R86 */
- 0x0000, /* R87 */
- 0x0800, /* R88 - Left Mixer Control */
- 0x1000, /* R89 - Right Mixer Control */
- 0x0000, /* R90 */
- 0x0000, /* R91 */
- 0x0000, /* R92 - OUT3 Mixer Control */
- 0x0000, /* R93 - OUT4 Mixer Control */
- 0x0000, /* R94 */
- 0x0000, /* R95 */
- 0x0000, /* R96 - Output Left Mixer Volume */
- 0x0000, /* R97 - Output Right Mixer Volume */
- 0x0000, /* R98 - Input Mixer Volume L */
- 0x0000, /* R99 - Input Mixer Volume R */
- 0x0000, /* R100 - Input Mixer Volume */
- 0x0000, /* R101 */
- 0x0000, /* R102 */
- 0x0000, /* R103 */
- 0x00E4, /* R104 - OUT1L Volume */
- 0x00E4, /* R105 - OUT1R Volume */
- 0x00E4, /* R106 - OUT2L Volume */
- 0x02E4, /* R107 - OUT2R Volume */
- 0x0000, /* R108 */
- 0x0000, /* R109 */
- 0x0000, /* R110 */
- 0x0000, /* R111 - BEEP Volume */
- 0x0A00, /* R112 - AI Formating */
- 0x0000, /* R113 - ADC DAC COMP */
- 0x0020, /* R114 - AI ADC Control */
- 0x0020, /* R115 - AI DAC Control */
- 0x0000, /* R116 */
- 0x0000, /* R117 */
- 0x0000, /* R118 */
- 0x0000, /* R119 */
- 0x0000, /* R120 */
- 0x0000, /* R121 */
- 0x0000, /* R122 */
- 0x0000, /* R123 */
- 0x0000, /* R124 */
- 0x0000, /* R125 */
- 0x0000, /* R126 */
- 0x0000, /* R127 */
- 0x1FFF, /* R128 - GPIO Debounce */
- 0x0000, /* R129 - GPIO Pin pull up Control */
- 0x0110, /* R130 - GPIO Pull down Control */
- 0x0000, /* R131 - GPIO Interrupt Mode */
- 0x0000, /* R132 */
- 0x0000, /* R133 - GPIO Control */
- 0x09DA, /* R134 - GPIO Configuration (i/o) */
- 0x0DD6, /* R135 - GPIO Pin Polarity / Type */
- 0x0000, /* R136 */
- 0x0000, /* R137 */
- 0x0000, /* R138 */
- 0x0000, /* R139 */
- 0x1310, /* R140 - GPIO Function Select 1 */
- 0x0033, /* R141 - GPIO Function Select 2 */
- 0x2000, /* R142 - GPIO Function Select 3 */
- 0x0000, /* R143 - GPIO Function Select 4 */
- 0x0000, /* R144 - Digitiser Control (1) */
- 0x0002, /* R145 - Digitiser Control (2) */
- 0x0000, /* R146 */
- 0x0000, /* R147 */
- 0x0000, /* R148 */
- 0x0000, /* R149 */
- 0x0000, /* R150 */
- 0x0000, /* R151 */
- 0x7000, /* R152 - AUX1 Readback */
- 0x7000, /* R153 - AUX2 Readback */
- 0x7000, /* R154 - AUX3 Readback */
- 0x7000, /* R155 - AUX4 Readback */
- 0x0000, /* R156 - USB Voltage Readback */
- 0x0000, /* R157 - LINE Voltage Readback */
- 0x0000, /* R158 - BATT Voltage Readback */
- 0x0000, /* R159 - Chip Temp Readback */
- 0x0000, /* R160 */
- 0x0000, /* R161 */
- 0x0000, /* R162 */
- 0x0000, /* R163 - Generic Comparator Control */
- 0x0000, /* R164 - Generic comparator 1 */
- 0x0000, /* R165 - Generic comparator 2 */
- 0x0000, /* R166 - Generic comparator 3 */
- 0x0000, /* R167 - Generic comparator 4 */
- 0xA00F, /* R168 - Battery Charger Control 1 */
- 0x0B06, /* R169 - Battery Charger Control 2 */
- 0x0000, /* R170 - Battery Charger Control 3 */
- 0x0000, /* R171 */
- 0x0000, /* R172 - Current Sink Driver A */
- 0x0000, /* R173 - CSA Flash control */
- 0x0000, /* R174 - Current Sink Driver B */
- 0x0000, /* R175 - CSB Flash control */
- 0x0000, /* R176 - DCDC/LDO requested */
- 0x032D, /* R177 - DCDC Active options */
- 0x0000, /* R178 - DCDC Sleep options */
- 0x0025, /* R179 - Power-check comparator */
- 0x000E, /* R180 - DCDC1 Control */
- 0x0800, /* R181 - DCDC1 Timeouts */
- 0x1006, /* R182 - DCDC1 Low Power */
- 0x0018, /* R183 - DCDC2 Control */
- 0x0000, /* R184 - DCDC2 Timeouts */
- 0x0000, /* R185 */
- 0x0056, /* R186 - DCDC3 Control */
- 0x1800, /* R187 - DCDC3 Timeouts */
- 0x0006, /* R188 - DCDC3 Low Power */
- 0x000E, /* R189 - DCDC4 Control */
- 0x1000, /* R190 - DCDC4 Timeouts */
- 0x0006, /* R191 - DCDC4 Low Power */
- 0x0008, /* R192 - DCDC5 Control */
- 0x0000, /* R193 - DCDC5 Timeouts */
- 0x0000, /* R194 */
- 0x0026, /* R195 - DCDC6 Control */
- 0x0C00, /* R196 - DCDC6 Timeouts */
- 0x0006, /* R197 - DCDC6 Low Power */
- 0x0000, /* R198 */
- 0x0003, /* R199 - Limit Switch Control */
- 0x001C, /* R200 - LDO1 Control */
- 0x0000, /* R201 - LDO1 Timeouts */
- 0x001C, /* R202 - LDO1 Low Power */
- 0x0006, /* R203 - LDO2 Control */
- 0x0400, /* R204 - LDO2 Timeouts */
- 0x001C, /* R205 - LDO2 Low Power */
- 0x001C, /* R206 - LDO3 Control */
- 0x1400, /* R207 - LDO3 Timeouts */
- 0x001C, /* R208 - LDO3 Low Power */
- 0x001A, /* R209 - LDO4 Control */
- 0x0000, /* R210 - LDO4 Timeouts */
- 0x001C, /* R211 - LDO4 Low Power */
- 0x0000, /* R212 */
- 0x0000, /* R213 */
- 0x0000, /* R214 */
- 0x0000, /* R215 - VCC_FAULT Masks */
- 0x001F, /* R216 - Main Bandgap Control */
- 0x0000, /* R217 - OSC Control */
- 0x9000, /* R218 - RTC Tick Control */
- 0x0000, /* R219 - Security1 */
- 0x4000, /* R220 */
- 0x0000, /* R221 */
- 0x0000, /* R222 */
- 0x0000, /* R223 */
- 0x0000, /* R224 - Signal overrides */
- 0x0000, /* R225 - DCDC/LDO status */
- 0x0000, /* R226 - Charger Overides/status */
- 0x0000, /* R227 - misc overrides */
- 0x0000, /* R228 - Supply overrides/status 1 */
- 0x0000, /* R229 - Supply overrides/status 2 */
- 0xE000, /* R230 - GPIO Pin Status */
- 0x0000, /* R231 - comparotor overrides */
- 0x0000, /* R232 */
- 0x0000, /* R233 - State Machine status */
- 0x1200, /* R234 */
- 0x0000, /* R235 */
- 0x8000, /* R236 */
- 0x0000, /* R237 */
- 0x0000, /* R238 */
- 0x0000, /* R239 */
- 0x0003, /* R240 */
- 0x0000, /* R241 */
- 0x0000, /* R242 */
- 0x0004, /* R243 */
- 0x0300, /* R244 */
- 0x0000, /* R245 */
- 0x0200, /* R246 */
- 0x0000, /* R247 */
- 0x1000, /* R248 - DCDC1 Test Controls */
- 0x5000, /* R249 */
- 0x1000, /* R250 - DCDC3 Test Controls */
- 0x1000, /* R251 - DCDC4 Test Controls */
- 0x5100, /* R252 */
- 0x1000, /* R253 - DCDC6 Test Controls */
-};
-#endif
-
-#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_3
-
-#undef WM8350_HAVE_CONFIG_MODE
-#define WM8350_HAVE_CONFIG_MODE
-
-const u16 wm8352_mode3_defaults[] = {
- 0x6143, /* R0 - Reset/ID */
- 0x0000, /* R1 - ID */
- 0x0002, /* R2 - Revision */
- 0x1C02, /* R3 - System Control 1 */
- 0x0204, /* R4 - System Control 2 */
- 0x0000, /* R5 - System Hibernate */
- 0x8A00, /* R6 - Interface Control */
- 0x0000, /* R7 */
- 0x8000, /* R8 - Power mgmt (1) */
- 0x0000, /* R9 - Power mgmt (2) */
- 0x0000, /* R10 - Power mgmt (3) */
- 0x2000, /* R11 - Power mgmt (4) */
- 0x0E00, /* R12 - Power mgmt (5) */
- 0x0000, /* R13 - Power mgmt (6) */
- 0x0000, /* R14 - Power mgmt (7) */
- 0x0000, /* R15 */
- 0x0000, /* R16 - RTC Seconds/Minutes */
- 0x0100, /* R17 - RTC Hours/Day */
- 0x0101, /* R18 - RTC Date/Month */
- 0x1400, /* R19 - RTC Year */
- 0x0000, /* R20 - Alarm Seconds/Minutes */
- 0x0000, /* R21 - Alarm Hours/Day */
- 0x0000, /* R22 - Alarm Date/Month */
- 0x0320, /* R23 - RTC Time Control */
- 0x0000, /* R24 - System Interrupts */
- 0x0000, /* R25 - Interrupt Status 1 */
- 0x0000, /* R26 - Interrupt Status 2 */
- 0x0000, /* R27 */
- 0x0000, /* R28 - Under Voltage Interrupt status */
- 0x0000, /* R29 - Over Current Interrupt status */
- 0x0000, /* R30 - GPIO Interrupt Status */
- 0x0000, /* R31 - Comparator Interrupt Status */
- 0x3FFF, /* R32 - System Interrupts Mask */
- 0x0000, /* R33 - Interrupt Status 1 Mask */
- 0x0000, /* R34 - Interrupt Status 2 Mask */
- 0x0000, /* R35 */
- 0x0000, /* R36 - Under Voltage Interrupt status Mask */
- 0x0000, /* R37 - Over Current Interrupt status Mask */
- 0x0000, /* R38 - GPIO Interrupt Status Mask */
- 0x0000, /* R39 - Comparator Interrupt Status Mask */
- 0x0040, /* R40 - Clock Control 1 */
- 0x0000, /* R41 - Clock Control 2 */
- 0x3A00, /* R42 - FLL Control 1 */
- 0x7086, /* R43 - FLL Control 2 */
- 0xC226, /* R44 - FLL Control 3 */
- 0x0000, /* R45 - FLL Control 4 */
- 0x0000, /* R46 */
- 0x0000, /* R47 */
- 0x0000, /* R48 - DAC Control */
- 0x0000, /* R49 */
- 0x00C0, /* R50 - DAC Digital Volume L */
- 0x00C0, /* R51 - DAC Digital Volume R */
- 0x0000, /* R52 */
- 0x0040, /* R53 - DAC LR Rate */
- 0x0000, /* R54 - DAC Clock Control */
- 0x0000, /* R55 */
- 0x0000, /* R56 */
- 0x0000, /* R57 */
- 0x4000, /* R58 - DAC Mute */
- 0x0000, /* R59 - DAC Mute Volume */
- 0x0000, /* R60 - DAC Side */
- 0x0000, /* R61 */
- 0x0000, /* R62 */
- 0x0000, /* R63 */
- 0x8000, /* R64 - ADC Control */
- 0x0000, /* R65 */
- 0x00C0, /* R66 - ADC Digital Volume L */
- 0x00C0, /* R67 - ADC Digital Volume R */
- 0x0000, /* R68 - ADC Divider */
- 0x0000, /* R69 */
- 0x0040, /* R70 - ADC LR Rate */
- 0x0000, /* R71 */
- 0x0303, /* R72 - Input Control */
- 0x0000, /* R73 - IN3 Input Control */
- 0x0000, /* R74 - Mic Bias Control */
- 0x0000, /* R75 */
- 0x0000, /* R76 - Output Control */
- 0x0000, /* R77 - Jack Detect */
- 0x0000, /* R78 - Anti Pop Control */
- 0x0000, /* R79 */
- 0x0040, /* R80 - Left Input Volume */
- 0x0040, /* R81 - Right Input Volume */
- 0x0000, /* R82 */
- 0x0000, /* R83 */
- 0x0000, /* R84 */
- 0x0000, /* R85 */
- 0x0000, /* R86 */
- 0x0000, /* R87 */
- 0x0800, /* R88 - Left Mixer Control */
- 0x1000, /* R89 - Right Mixer Control */
- 0x0000, /* R90 */
- 0x0000, /* R91 */
- 0x0000, /* R92 - OUT3 Mixer Control */
- 0x0000, /* R93 - OUT4 Mixer Control */
- 0x0000, /* R94 */
- 0x0000, /* R95 */
- 0x0000, /* R96 - Output Left Mixer Volume */
- 0x0000, /* R97 - Output Right Mixer Volume */
- 0x0000, /* R98 - Input Mixer Volume L */
- 0x0000, /* R99 - Input Mixer Volume R */
- 0x0000, /* R100 - Input Mixer Volume */
- 0x0000, /* R101 */
- 0x0000, /* R102 */
- 0x0000, /* R103 */
- 0x00E4, /* R104 - OUT1L Volume */
- 0x00E4, /* R105 - OUT1R Volume */
- 0x00E4, /* R106 - OUT2L Volume */
- 0x02E4, /* R107 - OUT2R Volume */
- 0x0000, /* R108 */
- 0x0000, /* R109 */
- 0x0000, /* R110 */
- 0x0000, /* R111 - BEEP Volume */
- 0x0A00, /* R112 - AI Formating */
- 0x0000, /* R113 - ADC DAC COMP */
- 0x0020, /* R114 - AI ADC Control */
- 0x0020, /* R115 - AI DAC Control */
- 0x0000, /* R116 */
- 0x0000, /* R117 */
- 0x0000, /* R118 */
- 0x0000, /* R119 */
- 0x0000, /* R120 */
- 0x0000, /* R121 */
- 0x0000, /* R122 */
- 0x0000, /* R123 */
- 0x0000, /* R124 */
- 0x0000, /* R125 */
- 0x0000, /* R126 */
- 0x0000, /* R127 */
- 0x1FFF, /* R128 - GPIO Debounce */
- 0x0010, /* R129 - GPIO Pin pull up Control */
- 0x0000, /* R130 - GPIO Pull down Control */
- 0x0000, /* R131 - GPIO Interrupt Mode */
- 0x0000, /* R132 */
- 0x0000, /* R133 - GPIO Control */
- 0x0BFB, /* R134 - GPIO Configuration (i/o) */
- 0x0FFD, /* R135 - GPIO Pin Polarity / Type */
- 0x0000, /* R136 */
- 0x0000, /* R137 */
- 0x0000, /* R138 */
- 0x0000, /* R139 */
- 0x0310, /* R140 - GPIO Function Select 1 */
- 0x0001, /* R141 - GPIO Function Select 2 */
- 0x2300, /* R142 - GPIO Function Select 3 */
- 0x0003, /* R143 - GPIO Function Select 4 */
- 0x0000, /* R144 - Digitiser Control (1) */
- 0x0002, /* R145 - Digitiser Control (2) */
- 0x0000, /* R146 */
- 0x0000, /* R147 */
- 0x0000, /* R148 */
- 0x0000, /* R149 */
- 0x0000, /* R150 */
- 0x0000, /* R151 */
- 0x7000, /* R152 - AUX1 Readback */
- 0x7000, /* R153 - AUX2 Readback */
- 0x7000, /* R154 - AUX3 Readback */
- 0x7000, /* R155 - AUX4 Readback */
- 0x0000, /* R156 - USB Voltage Readback */
- 0x0000, /* R157 - LINE Voltage Readback */
- 0x0000, /* R158 - BATT Voltage Readback */
- 0x0000, /* R159 - Chip Temp Readback */
- 0x0000, /* R160 */
- 0x0000, /* R161 */
- 0x0000, /* R162 */
- 0x0000, /* R163 - Generic Comparator Control */
- 0x0000, /* R164 - Generic comparator 1 */
- 0x0000, /* R165 - Generic comparator 2 */
- 0x0000, /* R166 - Generic comparator 3 */
- 0x0000, /* R167 - Generic comparator 4 */
- 0xA00F, /* R168 - Battery Charger Control 1 */
- 0x0B06, /* R169 - Battery Charger Control 2 */
- 0x0000, /* R170 - Battery Charger Control 3 */
- 0x0000, /* R171 */
- 0x0000, /* R172 - Current Sink Driver A */
- 0x0000, /* R173 - CSA Flash control */
- 0x0000, /* R174 - Current Sink Driver B */
- 0x0000, /* R175 - CSB Flash control */
- 0x0000, /* R176 - DCDC/LDO requested */
- 0x032D, /* R177 - DCDC Active options */
- 0x0000, /* R178 - DCDC Sleep options */
- 0x0025, /* R179 - Power-check comparator */
- 0x0006, /* R180 - DCDC1 Control */
- 0x0400, /* R181 - DCDC1 Timeouts */
- 0x1006, /* R182 - DCDC1 Low Power */
- 0x0018, /* R183 - DCDC2 Control */
- 0x0000, /* R184 - DCDC2 Timeouts */
- 0x0000, /* R185 */
- 0x0050, /* R186 - DCDC3 Control */
- 0x0C00, /* R187 - DCDC3 Timeouts */
- 0x0006, /* R188 - DCDC3 Low Power */
- 0x000E, /* R189 - DCDC4 Control */
- 0x0400, /* R190 - DCDC4 Timeouts */
- 0x0006, /* R191 - DCDC4 Low Power */
- 0x0008, /* R192 - DCDC5 Control */
- 0x0000, /* R193 - DCDC5 Timeouts */
- 0x0000, /* R194 */
- 0x0029, /* R195 - DCDC6 Control */
- 0x0800, /* R196 - DCDC6 Timeouts */
- 0x0006, /* R197 - DCDC6 Low Power */
- 0x0000, /* R198 */
- 0x0003, /* R199 - Limit Switch Control */
- 0x001D, /* R200 - LDO1 Control */
- 0x1000, /* R201 - LDO1 Timeouts */
- 0x001C, /* R202 - LDO1 Low Power */
- 0x0017, /* R203 - LDO2 Control */
- 0x1000, /* R204 - LDO2 Timeouts */
- 0x001C, /* R205 - LDO2 Low Power */
- 0x0006, /* R206 - LDO3 Control */
- 0x1000, /* R207 - LDO3 Timeouts */
- 0x001C, /* R208 - LDO3 Low Power */
- 0x0010, /* R209 - LDO4 Control */
- 0x1000, /* R210 - LDO4 Timeouts */
- 0x001C, /* R211 - LDO4 Low Power */
- 0x0000, /* R212 */
- 0x0000, /* R213 */
- 0x0000, /* R214 */
- 0x0000, /* R215 - VCC_FAULT Masks */
- 0x001F, /* R216 - Main Bandgap Control */
- 0x0000, /* R217 - OSC Control */
- 0x9000, /* R218 - RTC Tick Control */
- 0x0000, /* R219 - Security1 */
- 0x4000, /* R220 */
- 0x0000, /* R221 */
- 0x0000, /* R222 */
- 0x0000, /* R223 */
- 0x0000, /* R224 - Signal overrides */
- 0x0000, /* R225 - DCDC/LDO status */
- 0x0000, /* R226 - Charger Overides/status */
- 0x0000, /* R227 - misc overrides */
- 0x0000, /* R228 - Supply overrides/status 1 */
- 0x0000, /* R229 - Supply overrides/status 2 */
- 0xE000, /* R230 - GPIO Pin Status */
- 0x0000, /* R231 - comparotor overrides */
- 0x0000, /* R232 */
- 0x0000, /* R233 - State Machine status */
- 0x1200, /* R234 */
- 0x0000, /* R235 */
- 0x8000, /* R236 */
- 0x0000, /* R237 */
- 0x0000, /* R238 */
- 0x0000, /* R239 */
- 0x0003, /* R240 */
- 0x0000, /* R241 */
- 0x0000, /* R242 */
- 0x0004, /* R243 */
- 0x0300, /* R244 */
- 0x0000, /* R245 */
- 0x0200, /* R246 */
- 0x0000, /* R247 */
- 0x1000, /* R248 - DCDC1 Test Controls */
- 0x5000, /* R249 */
- 0x1000, /* R250 - DCDC3 Test Controls */
- 0x1000, /* R251 - DCDC4 Test Controls */
- 0x5100, /* R252 */
- 0x1000, /* R253 - DCDC6 Test Controls */
-};
-#endif
-
/*
* Access masks.
*/
-const struct wm8350_reg_access wm8350_reg_io_map[] = {
+static const struct wm8350_reg_access {
+ u16 readable; /* Mask of readable bits */
+ u16 writable; /* Mask of writable bits */
+ u16 vol; /* Mask of volatile bits */
+} wm8350_reg_io_map[] = {
/* read write volatile */
- { 0xFFFF, 0xFFFF, 0xFFFF }, /* R0 - Reset/ID */
- { 0x7CFF, 0x0C00, 0x7FFF }, /* R1 - ID */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R0 - Reset/ID */
+ { 0x7CFF, 0x0C00, 0x0000 }, /* R1 - ID */
{ 0x007F, 0x0000, 0x0000 }, /* R2 - ROM Mask ID */
{ 0xBE3B, 0xBE3B, 0x8000 }, /* R3 - System Control 1 */
{ 0xFEF7, 0xFEF7, 0xF800 }, /* R4 - System Control 2 */
diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h
index cba9bc8..509481d 100644
--- a/include/linux/mfd/wm8350/core.h
+++ b/include/linux/mfd/wm8350/core.h
@@ -587,24 +587,6 @@
#define WM8350_NUM_IRQ_REGS 7
extern const struct regmap_config wm8350_regmap;
-struct wm8350_reg_access {
- u16 readable; /* Mask of readable bits */
- u16 writable; /* Mask of writable bits */
- u16 vol; /* Mask of volatile bits */
-};
-extern const struct wm8350_reg_access wm8350_reg_io_map[];
-extern const u16 wm8350_mode0_defaults[];
-extern const u16 wm8350_mode1_defaults[];
-extern const u16 wm8350_mode2_defaults[];
-extern const u16 wm8350_mode3_defaults[];
-extern const u16 wm8351_mode0_defaults[];
-extern const u16 wm8351_mode1_defaults[];
-extern const u16 wm8351_mode2_defaults[];
-extern const u16 wm8351_mode3_defaults[];
-extern const u16 wm8352_mode0_defaults[];
-extern const u16 wm8352_mode1_defaults[];
-extern const u16 wm8352_mode2_defaults[];
-extern const u16 wm8352_mode3_defaults[];
struct wm8350;
@@ -618,7 +600,6 @@ struct wm8350 {
/* device IO */
struct regmap *regmap;
- u16 *reg_cache;
bool unlocked;
struct mutex auxadc_mutex;
--
1.7.10
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists