[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1339052603.5882.4.camel@phoenix>
Date: Thu, 07 Jun 2012 15:03:23 +0800
From: Axel Lin <axel.lin@...il.com>
To: linux-kernel@...r.kernel.org
Cc: Marek Vasut <marek.vasut@...il.com>, Liam Girdwood <lrg@...com>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Eric Miao <eric.y.miao@...il.com>,
Mike Rapoport <mike@...pulab.co.il>
Subject: [PATCH RFC RESEND 3/3] regulator: da903x: Don't read/write to
DA9030_INVAL/DA9034_INVAL address
For fixed voltage, DA9030_LDO13 and DA9034_LDO5, the info->vol_reg is
DA9030_INVAL/DA9034_INVAL.
It does not make sense to read/write to DA9030_INVAL/DA9034_INVAL address.
Signed-off-by: Axel Lin <axel.lin@...il.com>
---
drivers/regulator/da903x.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c
index 1005f5f..36c5b92 100644
--- a/drivers/regulator/da903x.c
+++ b/drivers/regulator/da903x.c
@@ -107,6 +107,9 @@ static int da903x_set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
struct device *da9034_dev = to_da903x_dev(rdev);
uint8_t val, mask;
+ if (rdev->desc->n_voltages == 1)
+ return -EINVAL;
+
val = selector << info->vol_shift;
mask = ((1 << info->vol_nbits) - 1) << info->vol_shift;
@@ -120,6 +123,9 @@ static int da903x_get_voltage_sel(struct regulator_dev *rdev)
uint8_t val, mask;
int ret;
+ if (rdev->desc->n_voltages == 1)
+ return 0;
+
ret = da903x_read(da9034_dev, info->vol_reg, &val);
if (ret)
return ret;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists